Regarding configuration cycle for sales order linking with project systems

Hai Sap professionals,
i have a scenario like engineer to order. where i manufacture PC's for my customer as per their request.
Some may order AMD's and some Intel processor etc... now how i should start linking everything a brief idea if any can tell it will be helpful...
with regards

hi,
In make-to-order production with cost management using a project, all costs and revenues relating to the make-to-order item are collected and allocated to a project in the SAP Project System. The costs are allocated to profitability analysis.
Prerequisites
Make-to-order production is controlled by the requirements type. The requirements type is determined on the basis of the MRP group and the strategy group in the material master record.
Up to Release 3.0, the requirements type is determined on the basis of the item category. For this reason, special item categories are used up to Release 3.0 for controlling make-to-order production. To carry out make-to-order production for a material with cost management using the project, you must maintain the following fields in the material master:
MRP 1
MRP Group
MRP 2
Strategy Group
Screen
Field
In addition, a plant must be assigned for make-to-order items in the sales order.
for detailed set up please refere the foll link:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/dd/5600b1545a11d1a7020000e829fd11/frameset.htm
regards,
Siddharth.

Similar Messages

How to configure rescheduling for sale order quantities

kindly explain how to configure rescheduling for sale order quantities that are created last month. kindly explain. i am in urgent.
regards,
g.v.shivakkumar

Hi,
Short text
Rescheduling sales and stock transfer documents: by material
Description
The 'Rescheduling' program (SDV03V02) processes sales document items that are contained in the item directory for the material. It takes into consideration open items and schedule lines from stock transfer items, stock transfer scheduling agreements and purchase order requests (items only), referred to hereafter as stock transfer documents, for the materials.
All sales documents for the material that are still open are selected. This means that the material index must be activated for at least all sales document types, whose items may have requirements. All stock transfer documents or items for the material that are still open are also selected. Open in this case means for example, that there is no deletion indicator, that the item from a stock transfer purchase order request cannot be labeled as completed or that the quantity delivered and posted to goods issue for the item in a stock transfer purchase order is the same as the amount ordered. An availability check can only be carried out if a checking rule is assigned to the document type - if this is not the case, the document or document item is not checked.
Checking rule 'A' is used as a basis for rescheduling sales orders (exceptions to this are rush orders they use checking rule B, and orders with individual customer stock; they use checking rule AE). Stock transfer documents use the checking rule that is assigned in Customizing for Purchasing. It is important that the scope of checks is consistent for both the stock transfer documents and the sales documents and that they do not exclude each other, as this can lead to incorrect test results. An example of an incorrect setting would be: The scope of check for checking rule 'A' checks delivery schedules for stock transfer purchase orders and stock transfer purchase requests, however the scope of check for the checking rule for the stock transport scheduling agreement does not.
The items and schedule lines found in the selection are sorted according to 'Priorities' - document category, delivery priority, creation date of the item or schedule line (for stock transfer purchase orders and delivery plans) entered on the selection screen or according to the schedule line date of the earliest schedule line with order quantity, document number and item number and then transferred to the availability check. Priority 1 is highest priority and priority 5 the lowest. Stock transfer purchase order requests are sorted after stock transfer purchase orders and scheduling agreements, as they are less binding. This means that when you have identical sort criteria such as delivery dates, the stock transfer purchase order item is checked first and then the item from the stock transfer purchase order request.
The preset option 'Unconfirmed documents required' only carries out rescheduling for materials for which there is at least one unconfirmed transaction.
You can use the parameters 'Sorting criteria delivery date' to define whether sorting is carried out with the order quantity after the creation date of the item or the delivery date of the earliest schedule line.
If you mark the 'Simulation' field, the checked documents are not saved. Instead a results list is generated and saved. However, the availability check for the corresponding documents continues as if saving has taken place already, that is, that the simulated list corresponds to the actual one.
Under 'Options' on the selection screen, specify whether sales documents and/or stock transfer documents should be processed. For stock transfer documents you can enter whether stock transfer purchase orders and scheduling agreements should be processed at item or schedule line level:
Processing at item level:
All open schedule lines for the item are read and collected, then transferred to the availability check. To sort and prioritize documents, you do not need each individual schedule line. It is sufficient to have the item or data from the first schedule line. All open schedule lines for the item are processed and checked.
Example of processing at item level:
Sorting: Date (Delivery date first schedule line) - Document number - Document item
Doc. cat. Doc. number Doc. item Doc. schedule line Delivery date PO        4500000012      10               0001              26.01. PO        4500000012      10               0002              26.02. PO        4500000025      20               0001              28.01. PO        4500000025      20               0002              02.02.
You can see that the second schedule line for document 4500000025/20 from 02.02 was processed after the second schedule line for document 4500000012/10 from 26.02. This is because all open schedule lines for an item are read and processed. The first schedule line from 4500000012/10 has the earliest delivery date, therefore it has priority.
Processing at schedule line level:
Each open schedule line for an item is entered in document sorting in accordance with the values entered under 'Priorities'. The availability check is carried out for each individual schedule line.
Example for processing at schedule line level:
Sorting: Date (delivery date first schedule line) - document number -document item
Doc. cat.    Doc. number Doc. item Doc. sched. line Del. date PO           4500000012    10             0001           26.01. PO           4500000025    20             0001           28.01. PO           4500000025    20             0002           02.02. PO           4500000012    10             0002           26.02.
Here you can see that each schedule line was sorted according to its delivery date. Note that this type of processing requires more runtime due to the individual checks and more frequent saving.
The results of rescheduling are saved, as long as the program was not started in simulation mode. When calling up from the 'Sales' area menu or when directly starting via the development environment, the iniator is informed via a dialog box that he has just started a process that changes data. He can then decide whether or not he wants to continue.
Checking procedure for stock transfer documents:
An availability check of stock transfer documents in rescheduling is carried out in accordance with the check carried out when manually creating a document. If, however, the required quantity for a schedule line is not available on a particular date and will not be ready until later, new schedule lines are created for the stock transfer purchase orders and scheduling agreements, containing the relevant data. New items are created in this case for stock transfer purchase order requirements. The total sum of schedule line quantities for a processed schedule line corresponds to the schedule line quantity of the original schedule line.
First example: Using a stock transfer purchase order item with a schedule line:
a) Status of item before rescheduling run:
Del. date PO quantity   Confirmed quant Confirmed del. date 23.07.      50 items       0 items              -
==> This now affects the stock/requirement situation:
    - Goods issue is posted for the material in the delivering plant on the 23.07.
    - A purchase order of 10 items was created for the material in the delivering plant. Delivery is expected on the 29.07.
b) Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity   Confirmed quant   Confirmed del. date 23.07.     40 items      40 items            23.07. 29.07.     10 items      10 items            29.07.
==> The first schedule line was changed in accordance with the results of the rescheduling availability check. Only 40 of the 50 original items could be delivered on the 23.07. Therefore, a new schedule line is created for the rest on the 29.07. for 10 confirmed items.
Second example: Same output situation as the above example.
==> There is now a change in the requirement/stock situation:
A purchase order for 10 items is created for the material in the delivering plant. Delivery is expected on the 29.07. A further purchase shows another 40 planned items on the 30.07.
   Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity Confirmed quant Confirmed del. date 29.07.     10 items       10 items          29.07. 30.07.     40 items       40 items          30.07.
==> The first schedule line was changed in accordance with the result of the availability check for rescheduling. The original delivery date is set to the date confirmed in the ATP check. A new schedule line is created for the remaining 40 items, that are available on the 30.07.
Note:
Any set fixed delivery date and quantity indicators and creation indicators for schedule lines or items are 'inherited' by newly created schedule lines. Assuming that the original schedule line was fixed in the above example (since it is created manually), this indicator is also set for the newly created schedule line.
If shipping scheduling is activated for a stock transfer document type, this is also implemented for newly created schedule lines, with the exception of route schedule determination. This means that in the current version of the program no route schedule has been determined for a schedule line containing a route schedule for which new schedule lines may need to be created.
The results of the run are issued in the form of a list, which is also saved, so that the results can be controlled at a later date. This is done using the function 'Evaluate rescheduling', but it is only a good idea to do this after the first rescheduling has taken place. You can restrict selection requirements but these can however affect the runtime. You can use this function to analyze the saved list until the next rescheduling run, which writes over the result. If you start rescheduling in the background, a spool file with the result list referred to will be created in the corresponding setting. You can see this in spool management.
Output
A list of changed documents, a list of documents in which an error occurred during processing and as a result were not changed, can be called up via the menu 'Edit - Error log'. If in a subsequent evaluation a restricted selection is carried out, a note appears at the end of the list to say that not all document items are displayed.
You can set the scope of the list under the menu option 'List' in the list display. You can view improvements, deteriorations and the whole list. Before the documents can be included in one or either of the restricted lists, the date or quantity has to have changed so that the item can be contained in both the list of improved or deteriorated documents.
You can use the interface for changing transactions and the order list to navigate. Use 'Back' to exit the list and 'New selection' to return to the selection screen.
Recommendation
You should only start this program occasionally and use very restricted selectin criteria during working hours as it requires enormous system resources.
Note
The columns for 'New date' and 'New confirmed qty' only contain entries if the dates or quantities have changed.
As the system only runs the change check (dates/quantities) per line in the original list, an item whose backlog has increased in the list of improvements. This occurs, for example, if the whole quantity can be delivered at once but at a later date. In this situation, the system determines an increase for the line when it compares quantities.
Regards,
Amrish Purohit

What happens sales order linked with wip job is cancelled

HI,
what happens sales order linked with wip job is cancelled ?
actually if wip job is cancelled then sales order lines is on hold ?
i wanted to know what if sales order of that wip job item line is cancelled say example if that wip job already is in processing .
please help me
Thanks in Advance.

If WIP job cancelled or Requisition/PO is cancelled, corresponding order line reservation will be cleared and will go to 'Supply Eligible' Status. Progressing this line will again follow the WIP/Requisition path based on item.

Throw Information message for sale order created with value less that 5$

Hi all,
I am basically an abaper, I have got a requirement in SD. The requirement is any sales order created with value less that 5$, should be prompted with an error message saying the minimum order value should be more than 5$. Could any one help me on this.
Thanks in advance,
shiv

userexit_save_document_prepare,main program - sapmv45a, issue an error message if your document value is less than 5$ (VBAK-NETWR) but check if your order has any non-rejected item, I would not issue this message if all items are rejected:
loop at xvbap where updkz ne 'D' and abgru = ' '.
exit.
endloop.
if sy-subrc = 0. "-you have at least one non-rejected, non-deleted item.
NOTE: sapmv45a works NOT only for orders, so please check document types in your logic which are relevant to your messge only (VBAK-VBTYP and/or VBAK-AUART).

ATP for sales orders created with BAPI_SALESORDER_CREATEFROMDAT2

We use BAPI_SALESORDER_CREATEFROMDAT2 to create sales orders (from external EDI system). How can I use this BAPI to perform availability-to-promise checking? If it can't be done is there another function module I can use where I pass a sales order number and it performs ATP on the entire order or individual lines? thanks for any help.

Hi,
Please check BAPI BAPI_MATERIAL_AVAILABILITY.
Regards,
Ferry Lianto

Need no document flow update for sales order create with reference

Dear All.
We would like to have the ability to create a sales order with reference to another sales order, and have the document flow of the sales order not updated.
Unlike the case of a standard create with reference where the documents are linked, in this case there is no relationship between the documents. The first document is just acting like a template for the remaining documents, to save time during order entry.
We have turned off update of document flow at the line item level.
But I don't see a way for us to turn this off at the header (document level). So wondering if there's another way to turn this off, or possibly through user-exit or VOFM requirement?
Has anyone else done this?
I think that CRM has this functionality, but we're still entering orders through ERP-SD.
Many Thanks!

Hello Colleague;
The issue you have reported is SAP standard. The checkbox "Update Document Flow" (V_TVCPAAP-UPFLU) controls document flow at item level. If this checkbox is set to blank, there will be no document flow at item level.
However, the document flow cannot be completely turned off - if the 'update document flow' indicator is blank, you will still see an entry in the document flow, but there will be no update to table VBFA (Sales Document Flow) and the document flow of the predecessor will not be updated at item level (no record in VBFA at item level).
The reason is that the system checks VBAP (Sales Document: Item Data) for fields VGBEL (Document number of the reference document) and VGPOS (Item number of the reference item) for values. You will always have document flow information on header and item level in the successor because it stores this information in table VBAP.
Related with this issue, you can find a Note 53383 for your review.
I hope it can clarify the case.
Regards
Ruy Castro

Is there any BAPI available for sales order creation with reference?

Hi Experts,
My requirement is to create sales order with reference for order type.
Now my billing document number already contains the two items
one is correct and another is zero quantity.
I want to create order with reference of billing document but not with zero quantity item.
Which BAPI I should use and what to pass to ignore zero quantity item?
Regards,
RH

Hi Ronny,
Try using BAPI_SALESORDER_CREATEFROMDAT2
Regards,
Shraddha

Pricing condition redetermination for sales order created with reference

Hi,
Are there any exit or routines that can be used to redetermine MWST pricing condition alone when creating sales order with reference to another sales order? The pricing from preceeding sales order is copied but we need only MWST to be redetermined after saving the order
This is because we are making changes so that while saving the sales order the material tax classification is defaulted to M based on some conditions so that MWST picks up the value M
Regards,
Vin

Hello Vinod ,
did you tried following options :-
1.Using Exit ( MV45aFzz) and re calculte pricning using FM 'PRICING'.
2.or Using Copy Control (Tcode : VOFM ) while creating order with Ref.
regards
Prabhu

BAPI for sales order creation with Reference

Hello Experts,
I have a order, with its reference I have to create a new sales order.
Am looking for BAPi, with which I can create a sales order with a Reference order (which is in my hand), so I checked SE37 with wild cards, but I did not find any!!
1) Pls. let me know a BAPI
2) And just like that I do not want to create a new order with the reference(existing) order, I have to change the PO number & order Reason(2 fileds) in newley creationg order, pls. let me know How to do it
Thank you

Hi,
First try to pass these two parameters to BAPI_SALESORDER_CREATEFROMDAT2
ORDER_HEADER_IN-REFDOCTYPE = Your Sch. Agreement No. (Please Check) and
ORDER_HEADER_IN-SD_DOC_CAT = 'E'.
If the above doesnt work ,than try using BAPI "BAPI_SALESDOCUMENT_COPY"
I hope you are working in SAP R/3 4.6C and above version because i am not sure whether this BAPI is available in lower version.
Let us know if this helps you..
Rgds,
Mayank

Inbound IDoc for Sales Order Creation with Serial Number

I would like to create Sales Order with Serial Number input at Item Level using IDoc. I have tried to use the followings:
1) Basic Type : ORDERS05
2) Message Type : ORDERS
3) Process Code : ORDE
I have used segment E1EDP19 with the followings:
1) QUALF = '014'
2) IDTNR = Serial Number
However, it fails. It seems that the system just expects us to input BOM explosion number (VBAP-SERNR) instead of the Serial Number that I want.
If we use VA01, we can input the Serial Number from Menu: Extra --> Technical Objects.
Is there any idea what should I do ?

The error message is "Entry 1276 does not exist in SNUM - check your entry" (Message no. 00058).
1276 is the Serial Number that I input. It treats the Serial Number that I input as the BOM explosion number (VBAP-SERNR).
Regards,
Alan.

How to find out Enhancement details for Sales Order

Hello,
Follwing is the scenerio:
As soon as Third Party Sales Order created, Header Billing block gets triggered (from Sales Doc settings in VOV8).
In Sales Order there are 4 items of items:
1. Hardware Material (Price) with Item Category, say A
2. Hardware Material (Free-of-Charge) with item category, say B
3. Service Material (Price) with Item Category, say C
4. Service Material (Free-of-Charge) with item category, say D
Now there is another billing block, at item level, for Hardware Material (Price) - item cat. A, ONLY.
I checked item cat. in VOV7, and this block is not configured there.
Sales Order saved (with pop-up message - Maintain Serial No. for Material, but as it's third party Order, stock is not in Inventory, so no Serial number at this point of time). PR triggered upon saving the Order. from PR, PO gets generated,and then MIRO.
Now, as vendor Invoice received with Stock details (Manufacturer's Serial No.), we go to VA02 and maintain Serial No. (Extra --> Serial No.) for all 4 types of material (Pls note that Billing block is for Hardware Price Material, but we need to maintain Serial No. for all 4 types of material) and save order.
As soon as, serial no. maintained, item level billing block gets removed for Hardware (price) material, automatically.
I need to understand how this functionality has been achieved?
More precisely how and where i can see the technical details, like What program is being developed, which user-exit is being used etc...
Thanks.

Hi Sumitra,
Since the system exit handler has to call your BADI go to SE24 and display
CL_EXITHANDLER
Chose method get_instance and set a break point.
And, then press F8, so it will show all the Badi's.
Regard's,
Shivesh Ranjan.

User exit for Sales order

hi,
i need to eliminate leading zeros for PO number which comes in SO created trough ALE.i found the enhancement for the FM idoc_input_orders.in that enahancement we have 12 FM's.my Leading zeros are comming for field belnr which comes in e1edk01 segment of idoc orders05.now i had coded my part of coding in FM exit_saplved.._oo1 and i had activated that.but it is not working for me.than i tought of going to other FM exit_sapl..._009.in which i'm not able go into the include either.plz help me out.thank you.

Hi, Krishna!
With IDOC_INPUT_ORDERS during IDoc interpretation PO number is assigned to XVBAK-BSTKD field which is later used for sales order creation with reference to PO.
So all you need is to use some customer exit with changing parameters containing XVBAK after IDoc interpretation is completed. For example you can use EXIT_SAPLVEDA_009 which is called at the end of IDoc check after interpretation.
Regards,
Maxim.

Standard Webdynpro Component for Sales Order / Quotations ?

Hello Experts,
Is there any standard ABAP Webdynpro Component available for Sales orders / Quotations etc. ?
Else we have to create everything customized for the customers ?
Regards,
Ravi Sharma

LORD_MAINTAIN - for sales order maintenance. Shipped with ERP 6.0 (no enhancement packages required - although there are improvements in the later enhancement packages).

Create ecatt script for one sales order creation with multiple line items

Hi ,
I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
This selection of data will be from an external file/ variants which will have only one row of data in it.
Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
Second: I have to create sales order for those many line items having same PO Number.
Best Regard
Taranum

Hi Micky
Firstl you should upload the Line items for a particular sales Order in an Internal table
and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
In case of any issues pls revert back
Reward points if helpful
Regards
Hitesh

How settlement rule will be created for Sales order with cost object

Dear Experts,
We are using product cost by sales order with valuated stock. In addition we are not using COPA
We also consume some materials at sales order level and at the end of month we want to do the result analysis and settlement for the same amount. In this case can any on explain how system will behave regarding settlement of sales order cost and what entries will get pass in the system.
In our case we have done below activities...
we have created sales order,
All production order activities completed till final GRN including month end activities
Material consumption against sales order
Result analysis executed
At the time of sales order settlement, system throwing error (Sender doesn't have valid receiver, please create settlement rule for sender object)
Then i checked in sales order there sales order settlement rule not defined.
I guess this settlement rule need be generated by system automatically. If not, please let me know the process of it.

HI kishore
the reason is that sale order always carry the revenue and production order and production period carry the cost .
cost you can settle to the Material and even management want to be settle the cost to material only in production order OR period
but in sales order when u sell the product it carry the revenue not the cost and management want see and analysis based on profitability segment are profit center level .
Prerequisites
If CO-PA is active, the system generates a settlement rule when you create the sales order. The settlement rule determines whether data is settled to other objects or other areas in Controlling. In accordance with this settlement rule, the relevant data is settled to CO-PA.
If CO-PA is not active, create a settlement rule. This settlement rule that you create manually normally contains a G/L account as a receiver (such as 399999). You can also settle costs and revenues or results analysis data to objects with revenue.
You can also settle the cost of sales calculated in results analysis to a fixed asset or a cost center. To do this, you must add to the allocation structure the results analysis cost elements under which the cost of sales is updated to the order.
The settlement rule includes a distribution rule for the sales order item. The distribution rule is made up of a settlement receiver, a settlement share, and a settlement type:
The settlement receiver (such as profitability segment or G/L account) specifies the object to which the actual costs and revenue of the sales order item are settled. The settlement receiver can be proposed through the settlement profile.
The settlement share defines the percentage or the equivalence numbers used to distribute the costs to the individual settlement receivers. The settlement share for sales order items is usually 100%. A settlement share of 100% is preset in the system.
The settlement type specifies full settlement of the sales order item. This ensures that all the data on the sales order is available for results analysis.
Settlement still takes place in each period. The revenues and the cost of sales are transferred to CO-PA by period, and the work in process and the reserves are transferred to FI.

Regarding configuration cycle for sales order linking with project systems

Similar Messages

Maybe you are looking for