Regarding correct version of xcode

Dear All
I am very new to xcode and thus ios app development.
I am unable to find the correct version of xcode for my pc.
The detail abt the pc is :
system version: Mac OS X Server 10.6.7 (10J869)
Kernel Version: Darwin 10.7.0
Model Name: Mac mini
I tried downloading xcode 3.2.6 + ios sdk 4.3.dmg (combined size is 141MB) but on mounting "not recognised " error comes.
plz help me out to find the correct version and or any other way to solve my prob
Regards

I had the exact same problem with my 2007 iMac running Snow Leopard (10.6.8). I am told that xcode_3.2.6_and_ios_sdk_4.3 wasn't recognised, and my download size was 2.81 GB. I attempted to follow Barney-15E's advice and download the latest from the app store (even though the app store specificly stated that it needed 10.7.4 or greater), only to be told "Xcode can't be installed on <computer> because Mac OS X version 10.7.4 or later is required."
As it turned out, I did have a bad download as the SDK is actually 4.44 GB. However, as of December 2012, the App store will no longer download the current version for Snow Leopard.

Similar Messages

How do I choose and then install the correct version of Adobe Flash Player for my machine?

First thing - My computer - PROCESSOR: Intel Celeron 450 @2.2 Ghz, MEMORY: 4GB, OS: Windows 7 Home Premium SP1 64 bit, BROWSER: IE 9.0.8112.16421
Everything was hunky-dory until the auto-installer updated my version to the Flash Player 11.2 version and that's when it all went downhill. As soon as it installed that version, none of the TV networks, news networks or Hulu recognized that I had Adobe Flash Player. In addition, I could no longer create a blank new tab in IE or use the tools button (the little gear symbol) in the upper right hand of an IE window. Because of the IE problems, I figured it was a problem with IE and went about searching for a solution in that arena. I finally found something at Microsoft that helped me determine if it was an IE problem and went through the various steps. The final step required booting into safemode and trying to replicate the problem. IE worked fine in safemode so, Microsoft determined the problem had to be with outside influences.
After several frustrating attempts with other fixes including virus scanning and firewall settings, the problem persisted. I then un-installed Flash Player per Adobe's instruction and re-installed the recommended 'latest' version. The problem remained. So, when all else had failed I did a full system restore to a point over a month ago, which is prior to the occurence of the problem, while at the same time noting which drivers and programs would be affected. I already had a sneaking suspicion that it was Flash Player because I read the full system requirements for the recommended version that the auto installer was trying to install (see below). I then began updating everything one at a time to see if any of the windows/software/driver updates had any affect on IE. None did until I got to the Adobe Flash Player and updated it.
Now, what I think the problem is: The auto installer ONLY looks at Operating System and Browser to determine which version of Adobe Flash Player is correct. In this regard, my machine should use the latest 11.2 version. HOWEVER, if you look at the full system requirements for the 11.2 versions, you will note that it requires a...... 2.33 Ghz processor! In this regard, 11.2 is NOT the correct version for my machine as it only has a 2.2 Ghz processor. And I think therein lies the problem.
So. I freely admit that I am not a computer expert and am, in fact, so far removed from ever even contemplating wearing such a title that I'm sure all who read this are sitting in your offices having a good laugh at my expense. As such, I welcome anyone and everyone to tell me what I've done wrong and how I should go about fixing it. If my deductions are correct, then could someone please tell me how to choose the correct version for my machine and then tell me how to actually install it on my machine.
I know that this is a long post and I thank you all for your patience and any help you choose to offer me.

Mr. Willener,
Thank you for your reply.
I did un-install and then re-install per the Adobe recommendations which are what you listed in your reply. The problem remained until I did a MS Windows restore to a restore point a month or so ago. The IE problems vanished. However, now I'm using an outdated and unsupported version that is lower than most of the web pages require for their sites, at least the ones I want to view (they all say I need to upgrade my Flash Player which, when I did, put me in this fix).
As to:
Pat Willener wrote:
Usuallyexasperated wrote:
it requires a...... 2.33 Ghz processor!
You can safely ignore that requirement; it is simply not true.
Why would Adobe post a system requirement of 2.33 Ghz for 11.2 if it simply were not true?
Message was edited by: Usuallyexasperated

I installed MAC LION OS X , which version of xcode is supported. i tried for it more than 3 days

Hi All,
I am new to MAC, i installed MAC os in windows 7 through the VM Ware, i tried to install xcode 4.1 and many version of xcode, after i download the .dmg file when i open it "xcode icon" is blocked, when double click it, says Update the version.
If i try to update after 2 hours and 99% updation, i get a message updation failed.
Please let me know which version of xcode can be installed in mac os x lion 10.7 or how do i update my mac os without any error.
Thanks for the help
Regards
Ram

Hi mende1,
I downloaded the xcode from window7 , and transfer the file from window7 to mac. And there i try to install i get the error which i said above.
Today i tried to install directly from the apple store, it say update "Mac Os to be updated 10.7.4" I am using 10.7
When i click update my OS after 2 hrs, i get message "Updation Failed" so how to update ?
Thanks for your prompt reply.

Correct version of Memory analyzer

HI
I have installed the memory installer from https://www.sdn.sap.com/irj/sdn/wiki?path=/display/java/javaMemoryAnalysis&.
And I have also gone through the 10 min video course available at
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0a5d007-a35f-2a10-da9f-99245623edda.
But when I try to do the same analysis that what they explained in the video course, I found that options are not available in the tool that I downloaded. Could you plz advise where can I get the correct version of the tool or video course ??
Thanks
kumar

Hi Kumar,
you have downloaded the latest version of the tool. It is the video tutorial that is a little bit out of date. Most of the features are available in the current version of Memory Analyzer, but the menues and toolbar buttons might look different (e.g. the icons were replaced).
If you list the functions you are missing (cannot find) - I will guide you how to find them.
Best Regards,
Elena.

How to choose correct version of editing app when choosing to edit image from within InDesign?

Hi all,
Normally when I wish to edit an image that is in a layout in InDesign I either press option-click on the image or I ctrl-click on the image and choose to edit it using Photoshop CC, Illustrator CC or whatever app I need to use at any specific time. Well, I also have backups going that backup my entire system and so all of my applications get backed up as well.
Well, what is happening now (since today) is that when I choose to edit the image, it is opening Photoshop (or Illustrator, etc.) from my BACK-UP drive and not within the app on my main drive. So, even tho' I already have Photoshop open as I am working in InDesign, when I try to edit an image it will open up the BACKUP copy of Photoshop AS well I have tried to choose "other" when ctrl-clicking on the image and choosing to edit...but when I navigate over to where Photoshop is on my main drive, I cannot choose the main app because it seems to show the main Photoshop app as a folder with the package contents therein.
How on earth can I correct the path to the correct version of Photoshop where I need to do the editing?? I now have to go about things a roundabout way by navigating to where the image is in the finder (via ctrl-clicking on the image link in the LINKS panel and choosing "show in finder") but this is taking twice as long:(( It wouldn't be so bad if I didn't have as many images I need to work with that I currently do.
Any help or advice will be much appreciated:))
Thank you kindly,
Christine

Just guessing...
Does the problem exist if Photoshop CC on the main drive is open? If not, consider setting it to open when the computer starts up. The active instance might take precedence over the inactive one.
Usually, the last-installed instance of an application is the one that operating systems (OS X & Windows) associate with a document file that calls for the application, for example, when double clicking in Finder/Explorer. It's common to see the newest release invoked (say Photoshop CC rather than Photoshop CS 6) because the newest release is usually the last one installed. Because Adobe CS applications usually install new versions of common files, it's recommended to install releases in chronological order if it's necessary to reinstall applications when there are multiple instances on the same computer. For example, install Photoshop CS4, then CS5, then CS6; if an earlier release is installed when a newer is present, the earlier common file(s) may cause problems for the application. A consequence of this is the normal, but sometimes annoying, behavior that when launching an application by launching one of its files, the newest release is opened because that's how the operating system works.
In your case, it's possible that the operating system sees the backup drive's Photoshop installation as the newest installation, and launches it. Perhaps backing up Photoshop CC makes that instance appear newer to the OS. Consider leaving Photoshop CC out of the backup operation. If that works, fine! If not, you might try starting the computer from the backup drive, running Photoshop, then quitting and restarting the computer from the main drive. If that doesn't fix the problem, perhaps try starting from the backup drive again, then reinstalling Photoshop on it, then restarting from the main drive. If this works, it may "hold," or some operation like backing up, might negate all your smart tricks.
Perhaps one of these strategies may be a permanent fix.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

JDK correct version for Portal 7.0 SP15

Hi gurus,
my client has SAP Portal 7.0 SP15 version.
I need to personalize portal.runtime.logon component with NWDS 7.0.15 (SP15).
Which are correct versions of JDK that I must use?
Is jdk1.5.0_14 correct?
Thanks a lot.
Gerardo

Hi Gerardo,
You can use Sun Microsystems J2SE SDK version 1.4.2_08 or 1.4.2_09 (Sun JDK 1.5 not tested). You can download this from Sun Microsystems at http://java.sun.com/products/archive/j2se/1.4.2_09/index.html. Please note that version 1.4.2_10 may cause installation problems.
Regards,
Uday.

Adobe Reader doesn't show correct version.

Adobe Reader doesn't show correct version. How can i check if the current version (10.2.3) is installed?

Good day,
The current version of Adobe Reader is 10.1.3. You can check to see if you have this version installed by choosing Help > About Adobe Reader (Windows) or Adobe Reader > About Adobe Reader (Mac).
Kind regards,
David

OS X 10.5.7 versions and XCode distributed build

Hi all,
I've just bought a new MacBook Pro (OS X 10.5.7 (9j3050)), and I can't share my computer for workgroup builds with my colleagues whom have OS X 10.5.7 (9J61) installed.
How can I make it work ? or how can I re-install 9J61 version on my laptop? (I have an old install DVD but my computer doesn't want to start installation, it always reboots...)
thanks

I am having a strange problem with one of my Macs in the distributed builds. All Macs are running the same OS and build number (10.5.7 (9J61, i386)) and have exactly the same version of XCode and compilers installed (gcc 4.0.1 (5493)). They all work fine apart from one Mac Pro. It shows up in the Distributed builds list but is shows the OS as unavailable and the Resources (compilers) as unavailable and subsequently the Status is Incompatible Service. Going to that machine and opening the Distributed Builds panel in the XCode Preferences shows no OS version by the My Computer OS: label and no versions against the Compilers: label just below the "Share my computer.." check boxes. Does anyone have any ideas why this might be happening? This computer is logged in with an Administrator account; the System Profiler shows all the correct information; all the latest software updates have been applied;
The clue must be why the XCode preferences panel is not showing the My Computer OS: values where all the other Macs show a value.

ISSUE:regarding production version tab of MRP4 of data transfer using BD10

Hi all,
This is regarding production version tab of MRP4 of data transfer using ALE idoc (BD10).
When i transfer the data using BD10 the production version is received at receiving end through segment
but not created in MRP4 view tab.An error is coming as-
"You wanted to maintain the master record of the material AB_06.04.09(2). However, it is already being processed by the user EBGABAP and is therefore locked."
I logged in as-EBGABAP
Please help me resolve the issue.
Thanks
Edited by: sanu debu on May 6, 2009 11:08 AM
Edited by: sanu debu on May 6, 2009 11:09 AM
Edited by: sanu debu on May 6, 2009 11:11 AM

>
sanu debu wrote:
> Hi,
> I have to upload production version tab data of MRP4 view(MM01).Please suggest a function moduleor bapi for the same.
>
> Thanks.
>
> Edited by: sanu debu on May 6, 2009 3:24 PM
BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA

I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player. I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time

I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player. I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time I try install the new player it is place in my Trash Folder and I can not get Player to work. I did everything I was to install it correctly but it still does not install it correctly. Can some help me. Bob

Some MacBook Pro versions cannot be upgraded past 10.6.8; others are maxed out at 10.7.5. newer models can go all the way to 10.10. So it is important to know exactly what version you have--there may be close to 40 variants produced since the MB made its debut in 2006.
You can safely give us a snapshot of your model and its current config that will allow us to deternmmine your model and its upgrade potential, plus show it you have any software that may impede any upgrades. Please download and install this free utility:
http://www.etresoft.com/etrecheck
It is secure and written by one of our most valued members to allow users to show details of their computer's configuration in Apple Support Communities without revealing any sensitive personal data.
Run the program and click the "Copy report to clipboard" button when it displays the results. Then return here and paste the report into a response to your initial post. It can often show if any harmful files/programs are dragging down your performance.
Remember that, on leaving OS10.6.8, you lose the ability to run older softare written for older PowerPC Macs (yours in Intel-based). Programs such as Office 2004 will no longer work (min of Office 2008 needed to work on newer OS versions), and AppleWorks will stop working completely

ERROR ITMS-9000:"This bundle is invalid. New apps and app updates submitted to the App Store must be built with public (GM) versions of Xcode 5.1.1

I submitted my IPA file to Itunes Connect using Application Loader and got the error message below. I have AIR SDK 13.0.0.111 and using Flash Builder 4.6.
Please help. Thank you in advance.
ERROR ITMS-9000: "This bundle is invalid. New apps and app updates submitted to the App Store must be built with public (GM) versions of Xcode 5.1.1 or higher and IOS 7 SDK. Do not submit apps built with beta software." ...

Hi!
I'm also using Air SDK 15 and I'm getting Invalid Bundle Error:
Adobe Air iOS Invalid Bundle
The bundle does not support the minimum version os specified in info.plisthttp://stackoverflow.com/questions/26047837/adobe-air-ios-invalid-bundle-the-bundle-does-n ot-support-the-minimum-version-os
Really need help
Michael

This bundle is invalid - New apps and app updates submitted to the App Store must be built with public (GM) versions of Xcode 5.1.1 or higher and iOS 7 SDK. Do not submit apps built with beta software

Does anyone can help me on this issue from Apple Developer?
This bundle is invalid - New apps and app updates submitted to the App Store must be built with public (GM) versions of Xcode 5.1.1 or higher and iOS 7 SDK. Do not submit apps built with beta software
Is there a new Flash CC - Adobe AIR SDK to solve this?
Best

Looks like there's some hope:
Re: App Store must be built with Xcode 5.1.1 or later !

IPad UIWebView and different versions of XCode

I have an iPad app with a UIWebView which loads some local .rtfd.zip files. The problem is that if I compile the app with XCode 3.2.2, everything works fine, but if I compile it with newer versions of XCode, I just get a blank UIWebView. Here's how I load the files into the UIWebVIew:
- (void)loadFile:(NSString*)file
NSString* resourcePath = [[NSBundle mainBundle] bundlePath];
NSString* sourceFilePath = [resourcePath stringByAppendingPathComponent:file];
NSURL* url = [NSURL fileURLWithPath:sourceFilePath isDirectory:NO];
NSURLRequest* request = [NSURLRequest requestWithURL:url];
[webview loadRequest:request];
[resourcePath release];
All the testing is done in the simulator.
Can you help me?
Thanks in advance!

I have the same problem and still investigating the cause. From a bit a searching, it seems that it may be caused by the way I set up my UIWebView to receive taps (I subclassed a UIView that wraps a UIWebView).
Here is a promising post about the solution:
http://mithin.in/2009/08/26/detecting-taps-and-events-on-uiwebview-the-right-way /

Need to dowload correct version of Firefox for Mac OS X 10.3.9

I have an old Mac which I will be retiring soon...as soon as I can get my information off it. To do so, I need to be able to use Firefox to upload it to a cloud storage system. But... I need the correct version of Firefox which will work with my old system. Any ideas? I certainly appreciate it.

The last version of Firefox to work on OS X 10.3.9 was Firefox 2.0.0.20, you can get it from ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/
That link is for the English-US version.

Correct version of jdeveloper to use with Oracle App Server 10g 10.1.2.0.2

Hi,
I just want to be sure, I am new to JDeveloper and I would just like to verify/ask what correct version of JDeveloper should we use so we could deploy the finished applications on our Oracle Application Server 10g 10.1.2.0.2 without errors?
Looking at this support matrix: http://www.oracle.com/technology/products/jdev/htdocs/11/as_supportmatrix.html#1013
I think we can use JDeveloper 10g (10.1.2)?
I downloaded Jdeveloper 10.1.2 from this link: http://www.oracle.com/technology/software/products/jdev/htdocs/soft10g.html.
Will this work well with Oracle Application Server 10g 10.1.2.0.2?
Thank you very much,
Mickey
Edited by: [email protected] on Aug 13, 2009 2:20 AM

Yes, it works well.
--olaf

Regarding correct version of xcode

Similar Messages

Maybe you are looking for