Regarding customer conditions and customer access fields

Hi there!
I've created customer conditions that may apply to a particular material when creating a purchase order in
conditions folder but it has as sequence fields two new fields that I've added to KOMG via one of its includes.  So, when it's time to analize which conditions may apply to calculate price, SAP doesn't find this customer fields and its value to make the proper analysis and decide if they must be included in the conditions list to calculate the final price.
What do I need to do in order to have it included in the conditions folder? Any ideas?

Hi Cristina,
I hope that I dont forget any step:
1.You need an additional field from customer, e.g. LPRIO from KNVV table. Then do an append in KOMK, and you must call the field with ZZ, so, the name of field must be ZZLPRIO.
2.In condition, fields for conditions (IMG, SD, conditions) and create a new entry with this field. Then you can create a new table for conditions with this field (V/03).
3.After this table is created you can add it to an access with V/07.
4. Finally, if you want that the system determine conditions you need that the system find this field in KOMK when SAP runs the functions of pricing. So in report MV45AFZZ.(open it wiht SSCR is it isnt open yet) in subroutine userexit_pricing_prepare_tkomk, you can write this code:
  tkomk-zzlprio = vbap-lprio.
Set a break point and debug it (perhaps lprio is populated in another internal table, eg: xvbap, etc...) while you create a sales order.
I forget in my first reply. Perhaps the data is from customer tables, but it is populated in data of items in sales order, so perhaps you need do the append in KOMP, and in this case you must use the subroutine userexit_pricing_prepare_tkomp. So for field LPRIO
tkomp-zzlprio = vbap-lprio,
I hope this helps you.
Regards,
Eduardo

Similar Messages

  • Regarding Shared Services and Essbase Access

    Hello,
    I am curious on few things regarding how Essbase and Shared services are interlinked.
    Basically we have created Essbase Filters to limit the User access to specific entities , my concern is if a User is trying to Run a report or retrieve through Smart View and if they don't have access to any one of the list of Filter definitions say if there are X , Y ,Z entities in the Spread sheet for Smart View retrieval or in a report and the user does not have privilege for Z do they still get terminated from the entire Essbase Applications. I encountered similar type of problem with one of the users today.
    Any comments.
    Thanks !

    Thanks for the reply Glenn , yes it should not get disconnected or have any connection issue. But below is what the error we get when using Essbase security filter.
    **** Cannot Open Member Selection. Essbase Error(1001064):You do not have sufficient access to perform read on this database ****

  • Setting Opportunity Access and Contact Access to null in Account Team

    Hi,
    We can set the the Opportunity Access and Contact Access to blank/null manually in the application but is it possible to set these to blank using import?
    Thanks,
    Teena

    Hi,
    Thanks for the reply. We have tried updating a record through Account Team > Import > Overwrite Existing Records where the Contact Access and Opportunity Access fields were blank. The import was successfull but the fields were not updated, they are still set to Full access. We used the Account EUID in the import file.
    Regards,
    Teena

  • Copy data customer PO and PO date field from quotation to sales order

    Hi Friends,
    Can you please let me know what copy control settings I need to maintain in order to copy customer PO# and PO date field data in quotation to sales order.
    All the data is getting copied from quotation to sales order when I create sales order with reference to quotation but the customer PO no. and PO date is not getting copied.
    Can anyone please help.
    Regards,
    Wasim.

    HI
    Not sure if this is possible via Customization or not but you can try the user-exits or Routines for the Sales Order program for this
    You need to change the include FV45C102 (assuming you have copied standard order and the copy controls). ABAP team should be able to make changes to this routine and achieve your requirement.
    In VTAA, after choosing the Source and Target order type and choosing the right Quatation item, check the routine for 'Bus.data/item compl.' and it will be what has been mentioned above.
    Please check &Revert
    Thanks&Regards
    Raghu.k

  • Accessing Custom CRM Fields using {module_data}?

    I know I can access CRM data on the site using {module_data version="v3" resource="customers"}.
    Is it possible to access the Custom CRM fields using the {module_data} tag? If so, how do I do that?

    Hi Lynda,
    Vote, comment and add your 2cents to the idea thread of this same idea. And use your powers of persuasion to get BC to hurry up on this feature!
    https://forums.adobe.com/community/business_catalyst/developer_forum/content?filterID=cont entstatus[published]objecttypeobjecttype[idea]
    Please vote, your voice counts.

  • I transferred files from a NAS server to the Mac Mini Snow Leopard Server and now some of the files have Custom Access and can't  be opened by some users.  How do I fix this?

    We're setting up our Mac Mini Snow Leopard Server, and in the process transferred files that had been stored and accessed from our Blackarmor NAS server over to the Mac.  These files were all created on PC's and are Office Excel files, WordPerfect files or PDF's.  When you look at the files on the Mac from the Mac and bring up Get Info for the affected file, it says that the file has Custom Access.  The files that work properly don't have that configuration.  I can access and open the files on some computers, but some users can't open the files from their computer even though they can see it.  We're all using PC's and they get the Error:  Access Denied-Contact your administrator--or something similar.  I've seen on the web similar issues and it may have something to do with ACL permissions.  I don't know enough about Mac OS to understand this, but what is baffling is that they can be opened from some PC's but not others, and all of the Users have the same accessibility to the files.  Thanks for a solution!!

    Oh, on the losing Internet, try this...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    PS. Your English is quite good & completely understandable.

  • Is it possible to have "Condition based custom project field entry in project detail page"

    Hello All,
    In PWA, In Project details page, when we add Displayed Project fields into the Project Information page, Is it possible that I have a custom enterprise field and based on its selection, I can choose the other field in that page.
    I mean, say i have a Custom field in project page as 'Hardware' which has a lookup of say :
    CD
    DVD
    Flash Drive
    External HDD
    Cloud etc.,
    Then when a user selects any one of these. then the below appearing options will be based on this selection. 
    Say user selects cloud, then the next project field should be like Public, Private or Hybrid. Which is not same when user selects other fields.
    I did not find any OOB solution for this. So can anyone please guide me how can I achieve this in PWA, so that these fields may be used as enterprise custom fields, which can be later used for Reporting purposes.
    Thanks,
    Shanky

    Hello,
    You could adopt this no code out of the box option approach:
    http://psbehindthescene.blogspot.co.uk/2014/04/cascading-custom-fields.html
    Or potentially look at adding JavaScript code to the page to do this programmatically - not looked at doing this but it should be possible.
    Another option might be Fluent Pros Auto Complete Manager - this might offer this functionality but I have never used it:
    http://www.fluentpro.com/productsautocomplete.html
    Paul 
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS |
    MVP | Downloads

  • How to search Products based on content of Custom 1 and Custom 2 fields

    I have a client who has only 6 products but each product has 30 colour and 6 size variations (for each colour of each prdouct) thus creating 1080 separate prdoucts which all need to be sold be individual product codes and with managing inventory levels.
    What we want to do is to give users a search facility that once they select the main product they can choose the colour and the size (as would be set in the custom 1 and custom 2 fields to present the desired product for purchase.
    Anyone got any idea whether this is possible in BC and if so how to achieve this?
    Whilst not for the clothing idnustry this requirement is common for any busienss in that industry so a solution would be very appealing tomany people I am sure.
    Thanks in anticipation...

    Hi Greg,
    I don't know how you'd implement that. There's no facility that will provide you with a search capability for a particular product, so if you're looking at the detail view of a product you can narrow it down somehow to a particular colour. By the way, how do you imagine this to work? Would it be a keyword search for colour?
    Out of the box you can only group those products, since your require inventory(otherwise you'd probably use attributes), and that would render the dropdown that contains all of the other products in that group and the customer would select the colour they want from the dropdown.
    Cheers,
    mario

  • Getting shipto customer and unloading point field of PO

    Hi Abapers ,
    Im having a difficulty to find the corresponding fields namely the ship to customer and unloading point  of PO. basically the logic is like this: for example: given the sales doc i can used the table vbpa to get the partner type = SH which is the ship to party then get the customer and unloading point field.
    for SO i can used table vbpa.how about in PO?i need to get the shipto customer and its unloading point field.which field and table will i used?

    Table : EKPA ( Partner Roles in Purchasing )
    Field : PARVW
    Mathews

  • Leopard questions - Permissions and "Custom Access"

    I just (reluctantly) upgraded to Leopard (only because I wanted to install the iLife 09 which requires 10.5.6), and then the Permissions fun started. Install went fine and so did the updates. Then I ran Disk Warrior (new directory, repair permissions, check all files/folders).
    I tried to read all the posts I could find, but none dealt with these particular messages, so I thought I'd ask just to make sure....
    2. I have hundreds of "ACL found but not expected", but all of mine are on:
    "System/Library/User Template/" and then there seems to be every language listed.
    2. There are dozens of "permissions differ on" and they all relate to Front Row (should be -rw-r-r, they are lrw-r-r). I haven't even used Front Row....
    Can I safely ignore all of those?
    And, while I'm asking questions:
    Is the "You have custom access" showing in any Get Info window of any application a Leopard "feature" or what does it mean? When I first checked, I found that several apps (part of OS or third party) did not have me, the admin, with "read & write" access. Some had "read only" and some "no access", but all of them showed the custom access. I went through all the apps and made them "read & write", but the custom access remains. These are apps I use quite often such as Graphic Converter.
    Can I ignore the "custom access" or do I need to do something about it?

    2. There are dozens of "permissions differ on" and they all relate to Front Row (should be -rw-r-r, they are lrw-r-r). I haven't even used Front Row....
    Ignore per Mac OS X 10.5- Disk Utility's Repair Disk Permissions messages that you can safely ignore. They are innocuous and will recur each time you repair permissions.
    1. I have hundreds of "ACL found but not expected", but all of mine are on:
    "System/Library/User Template/" and then there seems to be every language listed.
    These are the result of upgrading instead of doing a fresh install of Leopard. They are basically harmless. Such errors in your Home folder can be repaired using the Reset Password selection from the Utilities menu after booting from the Leopard installer DVD. Check the bottom option to Reset ACLs and click the button. Do not make any other selections. This only affects ACLs in the Home folder. To fix all such items means you have to perform an Archive and Install of Leopard then run the 10.5.8 Combo Updater. If you don't want to do all this then just ignore the issue.
    The Custom Access is the result of the custom ACLs and simply means you've upgraded from Tiger which did not support ACLs while Leopard does.
    In fact there are literally thousands of topics and replies on these two topics throughout the Leopard forums that deal specifically with these particular messages which is why Apple issued the above linked tech note.

  • I get unwanted Custom Access on files and cannot remove them.

    Since I installed Snow on my iMac quad core, with 10.6.7 at present, I get irregular custom access permissions applied to files and cannot remove some of them. I have tried Tinker Tools System and sometimes that works and other times it does not.
    I have wiped my hard drive clean and zeroed it and reinstalled the system many times and it seems to make no difference.
    The latest occurance was my users folder had custom access applied to it for no obvious reason. I was able to remove it from the user folder but not able to remove it from my home folder.
    I have worked with Dr. Howard Oakley from Mac User magazine and he was unablr to solve my problem also. He has helped me on others with great success.
    HELP!!!!

    Are you using a machine with only one account (which then of course is the account with administrator authority)?  Rather than completely rebuilding the system, did you use Disk Utility to Repair Disk Permissions?
    To repair permissions, boot from the Install DVD while holding down the ‘C’ key. 
    Select your Language preference and when the OS Install screen appears, go to the Tools menu in the Apple menu at the top of the screen and select Disk Utility. 
    From there click on First Aid and then run Repair Disk Permissions a few times in succession.  There will be some error or warning messages left, but they usually can be ignored. 
    Did that help?

  • Sharing and permissions, custom access, cant get user to have read and write acess

    Hello everyone, i have a Netgear Stora NAS on my MAC, its located in the finder under shared, when i click on it i sign in with my user account and it gives me my folders to my stora, on one of my folder (Movies), i clicked get info and under sharing and permissions it told me i had custom access, i changed the privelages of the name,"Everyone" from no access, to read and write, when i did this, the name on tope of this (the main username) vanished. so ive been searhing on how to get my privelages back, i went to + and added new GROUP "admins" and it gave me my main username back but now with read only acess, when i try to change it to read and write it dissapears, PLEASE HELPPPPP, thank you!!!!
    <Edited by Host>

    I am not sure why you get that error. One thing you can do is a SMC reset then try to format it again. However that being said I'm not fan of WD external HD's primarily because we see a lot of troubles with them on Macs. Their internal HD's are fine so that narrows it down to their enclosures. If the problem persists I'd return the drive and buy one of the following:
    OWC (www.macsales.com) Mercury Elite Pro series
    Lacie Quadra d2 series
    G-Tech G series
    SMC RESET
    • Shut down the computer.
    • Unplug the computer's power cord and all peripherals.
    • Press and hold the power button for 5 seconds.
    • Release the power button.
    • Attach the computers power cable.
    • Press the power button to turn on the computer.
    PRAM RESET
    • Shut down the computer.
    • Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    • Turn on the computer.
    • Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • "You have custom access" on unRAID server and iPhoto

    I'm not sure this has been covered, if so, I apologize. I just set up an unRAID (unix based) server (Lime-Technology.com) and it's been working well. I'm connecting via Samba (SMB), which takes a little while to make the initial connection, but then is pretty good. Mostly using it to store media, stream movies, etc. I also am storing my iTunes and iPhoto on the server and have run into some problems. First I've learned that to save energy, unRAID spins down the disks not being used, but for iTunes not to get befuddled, the disk that's storing the music files should be spinning before starting iTunes. I assumed the same with iPhoto, but yesterday I tried to open it and it spent some time examining the file and then said the iPhoto file was corrupt and to restore from a backup. I tried again and iphoto froze. I think the corruption problem may have come from the permissions. I'm noticing that many folders and files I create on the unRAID say "You have custom access" in the get info pane. And indeed, that's what I'm getting with the iPhoto file. Now, I've dragged my originals & modified folders into a new iPhoto library as a precaution, and it too is showing only custom access. But at least for now, I know the photos themselves are intact. I've searched around here for info on it and I'm a little confused. Can anyone give me some advice on how to get back my read/write permissions? Is this an SMB thing, a Unix thing, a server thing? THANKS!!!
    Message was edited by: abernardi

    I have the same problem with Excel files on an external drive. The drive is attached to my computer which is on a network and another user accesses the external drive. The problem of "custom access" began after our main server went down. I hope someone can come up with a solution so that I can set the permissions. For now the Excel files are all read only.
    Linda

  • Accessing fields of a custom object type

    Hello,
    this is for Oracle 11.2.0.4.0
    I am trying to create and return an object inside a function and then access attributes of that object.
    It works in that I get the expexted result in my query, but the object is created once again for each attribute that I am accessing:
    CREATE OR REPLACE TYPE zzz_tp_type_test AS OBJECT (
      col_a VARCHAR2(100 CHAR),
      col_b VARCHAR2(100 CHAR),
      col_c VARCHAR2(100 CHAR)
    CREATE OR REPLACE FUNCTION zzz_f_type_test RETURN zzz_tp_type_test
    IS
      ret zzz_tp_type_test := zzz_tp_type_test('aa', 'bb', 'cc');
    BEGIN
      dbms_output.put_line('Running once...');
      RETURN ret;
    END;
    SET serveroutput ON;
    SELECT (A).col_a, (A).col_b, (A).col_c FROM (
        SELECT zzz_f_type_test A FROM dual
    The result of the SELECT query is
    (A).COL_A
    (A).COL_B
    (A).COL_C
    aa
    bb
    cc
    Running once...
    Running once...
    Running once...
    I am not sure why this is happening, or how to prevent this. I would expect to call the function only once, and then access that one created instance for each attribute.
    I am thinking it might have to do with the parentheses around "A", but that was the only way to get the query to execute - without them I got a syntax error.
    What do I need to change for the DB to execute the function only once?
    Thank you...

    That's a good solution using a table type and table function.  It can be simplified a bit, as shown below.
    SCOTT@orcl> -- test environment:
    SCOTT@orcl> select banner from v$version
      2  /
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE    11.2.0.1.0    Production
    TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    5 rows selected.
    SCOTT@orcl> -- original type and function:
    SCOTT@orcl> CREATE OR REPLACE TYPE zzz_tp_type_test AS OBJECT (
      2        col_a VARCHAR2(100 CHAR),
      3        col_b VARCHAR2(100 CHAR),
      4        col_c VARCHAR2(100 CHAR)
      5      );
      6  /
    Type created.
    SCOTT@orcl> CREATE OR REPLACE FUNCTION zzz_f_type_test
      2    RETURN zzz_tp_type_test
      3  IS
      4    ret zzz_tp_type_test := zzz_tp_type_test('aa', 'bb', 'cc');
      5  BEGIN
      6    dbms_output.put_line('Running once...');
      7    RETURN ret;
      8  END;
      9  /
    Function created.
    SCOTT@orcl> SET SERVEROUTPUT ON
    SCOTT@orcl> -- additional type from Gerard:
    SCOTT@orcl> create or replace type zzz_nt_type_test is table of zzz_tp_type_test;
      2  /
    Type created.
    SCOTT@orcl> -- simplification of Gerard's query:
    SCOTT@orcl> select i.col_a, i.col_b, i.col_c
      2  from  table (zzz_nt_type_test (zzz_f_type_test())) i
      3  /
    COL_A
    COL_B
    COL_C
    aa
    bb
    cc
    1 row selected.
    Running once...
    SCOTT@orcl> exec dbms_output.put_line('end');
    end
    PL/SQL procedure successfully completed.
    SCOTT@orcl>

  • Get value based on column names for custom metadata field of Webcenter Content

    In UCM, I created a custom metadata field of type Text.  I then enabled optlist in that field.  I populate values to the optList, I am using a View.  The View has three columns.  Let us call them ID, Key, Value.  OptList displays the Keys in its list.  I then create a Content (Content ID: MyContent) in Webcenter Content and choose values from OptList for my new metadata field (MyField).
    From Webcenter Portal, I am populating a selectOneChoice with values of MyField in the Content ID: MyContent.  Remember from previous step, the values populated in selectOneChoice is the list of values selected from optList field MyField.  This optList is in-turn populated from View.  After the user selects a value in selectOneChoice, in Javascript, I need to alert a message in this format "value chosen - corresponding value from View of optList that populates MyField"
    I think an example will be useful:
    Here is a View that I created in Configuration Manager applet in Admin Applets of Webcenter Content:
    ID | State | Capital
    1 | North Carolina | Raleigh
    2 | California | Sacramento
    3 | Illinois | Chicago
    Then, I create a Custom Field (Name: MyField).  MyField is an optList the values are populated from View created above.  The internal value and display value are both State.  Then I Check-In a new content with Content Id: MyContent.  For MyContent, I select these values from OptList for MyField: {North Carolina, Illinois}.
    In my Webcenter Portal application, I create a Content Presenter Taskflow.  I configure it as a single item content presenter.  I assign MyContent as Content Id.  Then, in templateView, I get all values of MyField in MyContent and display them as selectOneChoice.  I created a javascript function that would get the value that user selected in selectOneChoice.  In the View created in Webcenter Content's Configuration Manager (above), there is a value corresponding to each value displayed.  So, for the selected value, I need to get the corresponding Capital and display it in my alert message.
    From Javascript, how can I get the value of Capital, given I have the value of State.

    Hi.
    The idea to achieve your requirement is next:
    Create a helper manage bean that will be call as Map access: #{stateUtil['Calofironia']} (it will return Raleigh). This value will be get calling GET_SCHEMA_VIEW_VALUES IDC service using RIDC in your manage bean.
    Pass the result of #{stateUtil['statename']} to your JavaScript function using <af:clientAttribute.../>
    I hope this information help you.
    Regards,

Maybe you are looking for