Regarding Displaying Error Messsage

I want to display the error message in the same page itself using jsp.
for example,in the login screen,if i click submit without entering Username and password,my jsp page page should display the error mesage in the same login page itself.it shouldnt go to an empty screen and print the result as "Enter the empty Fields".

hey praveen,
if this is only regrading checking blank fields then i will suggest u to use javascript...
else it depends on ur requirement...
Enjoy!

Similar Messages

Getting a Page Cannot be Displayed error while uploading a Contract Document in SAP E-sourcing for size 500mb

Hi Guys,
I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
Maximum Size set in Our SYSTEM is :9765MB.
Approx size of the Document tried is more then 300MB.
Appreciate your help on this.
Regards
Tarun

Hi Tarun,
Please check the below system properties using system user login
attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
attachments.upload.enable.buyers- " Enable/Disable uploading of attachments by internal users"
Also Please check with other attachment, contracts related properties in the System.
Let me know if this helps.
Thanks,
Raj.

Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."

Hi,
Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
DC:windows Server 2008 R2
Domain functional level:Windows Server 2003
When Winxp join domain, have no this error message.
I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
There have 3 suggestion in this article:
1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
Doesnt's work.
2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
On my DC, I run netstat -an, reslut as below:
UDP 192.168.20.3:137 *:*
3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
We are not using IPV6.
This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
Please help to check this issue.
Thank you very much.
BR
Guo YingHui

Hi Guo Ying,
I have faced this critical error which makes over-writes the host names in the domain when you join.
For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
Final Resolution is as follows:
You need to start the dns console on the DC & drop down the domain name.
Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

Editable alv: add custom validation and display "errors" in protocol list

Hi,
What I want to do:
PAI validation of editable alv with displaying error's in the protocol list by adding custom entries to the existing protocol object.
What is my problem:
After registering "data_changed event", the protocol list don't appear.
My understanding is, that the object "er_data_changed" is passed by the event "data_changed"
an so I thought I can add some more entries to the protocol list.
After "de-registering" the "data_changed" event, the protocol appears with the standard errros messages (e.g. "input to numeric" by enter charachters)
One more hint:
By creating a new object "er_data_changed" in the handler method the protocol list works, but I would like to append entries to the object that was passed with the event.
Probably I've misunderstand something, please help !
My coding:
PAI:
trigger event "data_changed" -> calls handler method
CALL METHOD r_myalv->check_changed_data
 IMPORTING
 e_valid = is_valid.
stop processing
IF is_valid NE 'X'.
 MESSAGE 'invalid input' TYPE 'E' .
ENDIF.
handler method:
handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid IMPORTING e_ucomm
 er_data_changed.
METHOD handle_data_changed.
 data: ls_mod_cell type lvc_s_modi.
 CALL METHOD er_data_changed->add_protocol_entry
 EXPORTING
 i_msgid = 'SU'
 i_msgty = 'E'
 i_msgno = '000'
 i_msgv1 = 'This is a test !'
 i_fieldname = ls_mod_cell-fieldname.
 er_data_changed->refresh_protocol( ).
 er_data_changed->DISPLAY_PROTOCOL( ).
ENDMETHOD. "handle_data_changed

Dear Olaf,
 If understood correctly, you want to Edit an ALV and do some data validations when some data is changed in an ALV. To do this follow the following steps:
1. Before displaying ALV, Register the edit event.
* Set cell modified to trigger data_changed
CALL METHOD go_alv_grid->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_modified.
2. Register the event DATA_CHANGED of class CL_GUI_ALV_GRID & handle the event.
SET HANDLER lo_event_receiver->handle_data_changed FOR go_alv_grid.
The event DATA_CHANGED of class CL_GUI_ALV_GRID has a parameter ER_DATA_CHANGED which is of type CL_ALV_CHANGED_DATA_PROTOCOL.
This er_data_changed has internal table MT_MOD_CELLS(contains index of records changed ) & MP_MOD_ROWS(contains the changed row), using these update your internal table accordingly.
DATA : wa_mod_cell TYPE lvc_s_modi.
FIELD-SYMBOLS: <fs> TYPE table.
LOOP AT er_data_changed->mt_mod_cells INTO wa_mod_cell.
ASSIGN er_data_changed->mp_mod_rows->* TO <fs>.
READ TABLE <fs> INTO wa_output INDEX wa_mod_cell-tabix.
MODIFY lt_output FROM wa_output INDEX wa_mod_cell-row_id.
ENDLOOP.
3. Here it self you can do the required data validations(No need of any PAI modules) as below.
IF wa_orders-zfstfirmtyp = c_9.
MESSAGE s288(zcsp).
DELETE er_data_changed->mt_mod_cells.
EXIT.
ENDIF.
Regards
Kesava

Not able to display error message in PR creation.

HI Experts,
In PR creation process i am not able to display error message.
BADI: ME_PROCESS_REQ_CUST
method : PROCESS_ACCOUNT, PROCESS_ITEM
I have used Include mm_messages_mac for handling error .
MESSAGE e112(XXX) WITH XX-XX. this is my error message.
even tried this also mmpur_message 'W' 'ZMM_PUR' '001' '' '' '' ''.
Please provide solution for this.
Regards,
Jayant

Hi,
In devepoment system im able to display the message but not in quality,code is 100% algined with quality.
In quality system error message is being executed but not displayed,i mean control is comming out after the error message.
i am using
message EXXX(XXX).
regards,
Jayant.

How to display error message in case of function module ?

In the report i was using " message-id " to display error message....
how to use in function module ?

Hi,
Messages in Function Modules and Methods
Messages have two different functions in function modules and methods:
Normal Messages
If you use messages in function modules and methods without the RAISING addition in the MESSAGE statement, and the caller does not catch the message, the message is handled
normally according to the context in which it is called within the function module or method.
Triggering Exceptions with Messages
If you use messages in function modules and methods with the addition
... RAISING <exc>
the way in which the message is handled depends on whether the calling program handles the exception <exc> or not.
If the calling program does not handle the exception, the message is displayed and handled according to the context in which it occurs in the function module or method from which it
was called.
If the calling program handles the exception, the message is not displayed. Instead, the procedure is interrupted in accordance with the message type, and processing returns to the calling program. The contents of the message are placed in the system fields SY-MSGID, SY-MSGTY, SY-MSGNO, and SY-MSGV1 to SY-MSGV4.
Catching Message in the Calling Program
You can catch messages from function modules that are not sent using the RAISING addition in the MESSAGE statement by including the implicit exception ERROR_MESSAGE in the
EXCEPTIONS list of the CALL FUNCTION statement. The following conditions apply:
Type S, I, and W messages are ignored (but logged during background processing)
Type E and A messages trigger the exception ERROR_MESSAGE
Type X messages trigger the usual runtime error and short dump.
Catching messages is not currently supported for methods.
Regards,
Bhaskar

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

How to display error documents in selection screen level

Hi,
Currently Iam doing Smartforms for journal voucher. Iam taking multiple documents as input and displaying relavent item data for each.
Now, my requirement is i want to display invalid document numbers at selection screen level. For example there are 30 invalid document number i want to display them before start-of-selection.
Thanks in advance,
Regards,
Chinna..

i have a query......say i am using a selet-options s_ebeln for ekko-ebeln.
i want to display error messages for
1>lower limit cant be greater than upper limit?
2>for special cahracters given in the select-options fields.....etc...
now when i am writing the code......
if s_ebeln-low gt s_ebeln-high.
message e001.
it is showing SAP's message not mine.
but ....if my s_ebeln-high field is 0.
then my message is showing.
pls give me the codes for these?

Display error message from SLG1 on shopping cart screen

I have implemented a 'BBP_CATALOG_TRANSFER' badi. I am adding all the custom error messages in ET_SC_MESSAGES export parameter of this badi. As a result of this, all the custom error messages added in the above parameter, gets logged in the application log SLG1 automatically and I can see those custom messages in SLG1. Now how to display this message from SLG1 on the shopping cart screen on the top where you normally see standard error messages in red.
Can anyone please help me on this?
Thanks,
Krupa

Hi
Which SRM version are you using ?
I have not tried this... but I think this is not possible to display error messages
using BBP_CATALOG_TRANSFER BADI.
Try to code your logic in using BBP_DOC_CHECK_BADI for filter type - BUS2121 (shopping cart). You need to add your custom message in ET_MESSAGES [] table.
For sample coding, refer to the link below ->
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/bbp_doc_check_badi-CheckPurchasingDocument&
Hope this will definitely help.
Do let me know.
Regards
- Atul

Character in chart of bw query display error in web browser

our system is unicode system,default language is chiniese(ZH)
our IGS patch level is 11
system basis release is 700 patch 13,and BW patch level is 15
everything is ok
but when we execute the query in WEB browser,the chart display error like the image below:
[http://www.xhschool.com:82/yuuki/viva/zh.jpg|http://www.xhschool.com:82/yuuki/viva/zh.jpg]
the text of kpi in the chart display error as the squares.
how can i make it correct?

Hi,
you have to download and install igshelper.sar as described in note 1028690.
Regards, Kai

How to validate VO result and display error message?

Hi,
I have created 2 pages:
Page 1: User to enter employee number and click 'Go' button to search (redirect to Page 2)
Page 2: To display employee details
In situation where employee is suspended, employee detail will be display as blank in Page 2.
At the same time, we would like to display error message which inform user to refer to HR Department for this scenario.
Need guidance on how to perform the validation and display error message.
Thanks and Regards,
Shiau Chin

Hi Shiau,
In this case instead of redirecting to next page, throw an exception on the same page.
If you want redirect it to next page then while redirecting it to next page pass some info that can indicate that employee is suspended, get this value in Process request if it has value then throw exception else query details.
Regards,
Reetesh Sharma

Batch management requirement cannot be changed; choose "Display errors

i am getting this error in material master when i am removing tick from batch managment
regard
nabil

Batch management requirement cannot be changed; choose "Display errors"
Message no. M3530
Diagnosis
The pushbutton Display errors appears only in dialog mode, not in data transfer or in mass maintenance.
Procedure
If this message appears in data transfer or in mass maintenance, and you want to know why the field cannot be changed, access the material in dialog mode using the relevant transaction below, try to change the field as required, and then choose Display errors:
Industry
Proceed
Retail
Proceed

"Page cannot be displayed" error in EBS R12

Hi All,
We implemented EBS R12 with 2 Application Node, 2 CM nodes and 2 DB Nodes(RAC). We have also setup load balancer at the application level. We have enabled HTTPS at the load balancer level. Our application works perfectly fine except some of the PIM module related screens and especially Workflow Manager, it gives us "Page Cannot be displayed" error sometime. What we have observed is, Our URL is https://ebs.abcltd.com but when we click on Workflow manager link under Oracle Application Manager, the URL gets redireced to http://ebs.abcltd.com:443/. We would like it know why this redirection is happening? as we have not mentioned this (http://ebs.abcltd.com:443) url in our context file.
Thanks,
Prasad

Hi Prasad,
Can you find any errors in Apache/Workflow/Database log files when this error occur?
Did you verify the session persistence on the load balancer? -- See the documents referenced in this F5 Load Balancer with Oracle 11i.
Regards,
Hussein

The page cannot be displayed Error showing for workspace

Hi All
The page cannot be displayed Error showing for workspace.
http://localhost:19000/workspace/index.jsp
Other web applications working fine.... Shared Services, FDM webclient
1. I have restarted Hyperion Workspace - Agent Service and IIS Admin service Still my problem didn't get resolved.
2.Below web services extensions provided *"Allow"* permission in Internet information services(IIS)Manager
Active Server Pages
ASP.NET v1.1.4322
ASP.NET v2.0.50727
Internet Data Connector
Server Side Includes
WebDAV
Application Pool->DefaultApp Status showing Running
Web sites->*1.Default web site 2.Administration* Status showing Running
Regards
Smilee

Correct, I just mistyped it in my thread. I just tried "http://epm.southbay.local:19000/workspace/"
When I click Start Reporting and Analysis core serivces a command prompt window opens with the name "server" on the window, but the command prompt window itself is empty.

As to display error message details

Hi Experts,
I would like to display error message's details via clicking on Details link as below, more information shall be displayed in a popped up dialog box. How can I implement it and add a link under Details word?
Kind Regards
Andie

Hi Andie,
Try using CRM_MESSAGE_COLLECT function module.
Sample code
CALL FUNCTION 'CRM_MESSAGE_COLLECT'
           EXPORTING
             iv_caller_name = 'ORDERADM_H'
             iv_msgno       = sy-msgno
             iv_msgid       = sy-msgid
             iv_msgty       = sy-msgty
             iv_msgv1       = sy-msgv1
             iv_msgv2       = sy-msgv2
             iv_msgv3       = sy-msgv3
             iv_msgv4       = sy-msgv4
             iv_docnumber   = iv_guid.
Best Regards,
Dharmakasi.

Regarding Displaying Error Messsage

Similar Messages

Maybe you are looking for