Regarding how download data from integration repository

Hi all:
     Could u pls tell me how download data from integration repository, eg, download data types, mapping under a software component as a local file?
         Thank u very much for any ur help

Hi jingying,
To download a TPZ file in ESR (Integration Repository), Go to Tools--> Export design objects
Step 1. (Select Source) Use the mode as Transport using File system & Check the checkbox for "Download File to Client"
Step 2. (Select Objects) In Object Set, choose according to your requirement, like Individual Objects to export only a data type or All Objects of Individual Namespaces etc.
Step 3. Click on finish Button
Step 4. Save the desired objects as a .tpz file on your local machine which can again be imported back on the ESR of any PI system.
Step 5. A pop-up "Export Successful" appears which confirms the export of the objects as a .tpz file. Click on Close button.
I hope this helps.
Regards, Gaurav.

Similar Messages

  • How to delete/remove the software component from integration repository

    Dear All
    How to delete/remove the software component from integration repository which we have created some Data and message types.
    Regards
    Blue

    Hi,
      Follow the steps below to delete the Software component:
    1. Delete the created Data Types, Message Types, Message Interfaces, Message Mappings, Interface Mappings and other imported objects like RFC's or IDoc's. Activate all changes.
    2. Then delete the namespace and the default datatypes present with the namespace after checking "objects are modifiable".
    3. Then delete the SW component, after placing the radio button in "Not permitted".
    Regds,
    Pinangshuk.

  • How to download data from itab to Excel sheet..

    Hi sap Experts,
    I develop one report to download data from itab to excel sheet.I done it perfectly.
    My doubt is in the excel sheet i need to put headings. and also at last i need to display total no.of Records.
    Please help me how to do this.
         Thanks in Advance....
    Thanks and Regards
    Siri.......................

    u can either use GUI_DOWNLOAD or the method below...just give a try
    DATA:WK_string TYPE STRING.
    DATA:Wk_EXT(4) TYPE C value '.xls'.
    DATA:WK_path TYPE STRING.
    DATA:wk_file_name type string.
    data:wk_records type sy-tfill.
    wk_file_name = 'Downloaded'.
    describe table itab lines wk_records.
    LOOP AT ITAB.
    at first.
    **Provide path
    concatenate 'C:\' wk_file_name Wk_EXT into wk_path.
    open dataset WK_path for output in text mode encoding default.
    if sy-subrc  0.
    write:'ERROR while opening dataset !!!!!!'.
    EXIT.
    endif.
    CONDENSE wk_path.
    **Heading Part
    concatenate 'Part No' 'Description'
         into wk_string separated by cl_abap_char_utilities=>horizontal_tab.
    endat.
    **Data ITAB
    CONCATENATE ITAB-MATNR itab-maktx into wk_string
         separated by cl_abap_char_utilities=>horizontal_tab.
    transfer wk_string to WK_path.
    at last.
    clear wk_string.
    Concatenate  'Records Passed:' wk_string into wk_string.
    transfer wk_string to WK_path.
    close dataset WK_path.
    endat.
    endloop.

  • How to download data from a an external hard drive ?j

    How to download data from an external hd ?

    You need to copy the data onto your computer and transfer it via that (either via iTunes, or if the app that you want to transfer the data to supports, via wifi). Like the previous reply said, you can't do it directly without a computer being involved.

  • How to download data from an internal table to a text

    Hi All,
    I want to download data  from an internal table to a text file.
    The fields should be pipe(|) separated. I have tried GUI_DOWNLOAD but it is not taking the field separator.
    The sample of the desired data that i require should be this way:-
    13456TR|M|COUP|MATERIAL|KGS
    Thanks in advance.
    Regards
    Satish.

    Hi,
    Try this..
    REPORT  zc1download message-id zc1dwnmsg.
    *& Declaration Section for the Tables *
    TABLES: makt.
    *& Declaration Section for the Internal Tables
    DATA: intab TYPE TABLE OF makt,
          wa_intab LIKE LINE OF intab,
          no_of_rec TYPE i,
          count TYPE i.
    DATA: BEGIN OF f_intab,
            str(255) TYPE c,
          END OF f_intab.
    DATA: t_intab LIKE TABLE OF f_intab,
          w_intab LIKE LINE OF t_intab,
          temp(255) TYPE c.
    FIELD-SYMBOLS: <f> TYPE ANY.
    *& Selection ScreenSection for the file download
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS: file TYPE rlgrap-filename MEMORY ID file,
                tab RADIOBUTTON GROUP rad1 DEFAULT 'X',
                others RADIOBUTTON GROUP rad1,
                delimit TYPE c.
    SELECTION-SCREEN END OF BLOCK b1.
    START-OF-SELECTION.
      IF file IS INITIAL. " check to ensure file.
        MESSAGE i001.
        EXIT.
      ENDIF.
      IF others = 'X'.    " check to ensure delimiter.
        IF delimit = ' '.
          MESSAGE i002.
          EXIT.
        ENDIF.
      ENDIF.
      SELECT * FROM makt INTO TABLE intab.
      IF tab = 'X'.       " default delimiter tab is used
          CALL FUNCTION 'WS_DOWNLOAD'
          EXPORTING
            filename                = file
            filetype                = 'DAT'
            mode                    = 'A'
          TABLES
            data_tab                = intab
          EXCEPTIONS
            file_open_error         = 1
            file_write_error        = 2
            invalid_filesize        = 3
            invalid_type            = 4
            no_batch                = 5
            unknown_error           = 6
            invalid_table_width     = 7
            gui_refuse_filetransfer = 8
            customer_error          = 9
            no_authority            = 10
            OTHERS                  = 11.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ELSE.             " If user defind delimiter is to be used
                  Counts the number of fields                *
        DO.
          ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
          IF sy-subrc <> 0.
            EXIT.
          ELSE.
            count = count + 1.
          ENDIF.
        ENDDO.
        LOOP AT intab INTO wa_intab.
          DO count TIMES. " Adding the delimiter in required places
            ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
            CONCATENATE temp delimit <f> INTO temp.
          ENDDO.
          SHIFT temp.
          APPEND temp TO t_intab.
          CLEAR temp.
        ENDLOOP.
        CALL FUNCTION 'WS_DOWNLOAD'
          EXPORTING
            filename                = file
            filetype                = 'ASC'
            mode                    = 'A'
          TABLES
            data_tab                = t_intab
          EXCEPTIONS
            file_open_error         = 1
            file_write_error        = 2
            invalid_filesize        = 3
            invalid_type            = 4
            no_batch                = 5
            unknown_error           = 6
            invalid_table_width     = 7
            gui_refuse_filetransfer = 8
            customer_error          = 9
            no_authority            = 10
            OTHERS                  = 11.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDIF.
      WRITE:/ 'The Data has been tranfered to :', file.
    Cheers
    Kathir!~

  • How to download data from spool to excel file

    Hi,
    I have requirement like....i need to download data from spool to excel file.
    Please let me know the process how to download...
    <removed by moderator>
    <removed by moderator>
    Thanks,
    Khasimsa
    Moderator message: please (re)search yourself before asking, do not assign priorities, do not offer re-ward
    locked by: Thomas Zloch on Sep 8, 2010 1:18 PM

    Hi try this way..
    *FM called that returns the Spool Request Number data into and internal table
      CALL FUNCTION 'RSPO_RETURN_ABAP_SPOOLJOB'
        EXPORTING
          rqident              = p_spool                     "Spool Request Number
          first_line           = 1
        TABLES
          buffer               = it_spool_xls                            "Internal table that will have the Spool Request No data
        EXCEPTIONS
          no_such_job          = 1
          not_abap_list        = 2
          job_contains_no_data = 3
          selection_empty      = 4
          no_permission        = 5
          can_not_access       = 6
          read_error           = 7
          OTHERS               = 8.
    *To convert the spool data into excel format
      CALL FUNCTION 'SO_RAW_TO_RTF'
        TABLES
          objcont_old = it_spool_xls               "Internal table having spool data
          objcont_new = it_xls_spool.           "Int table having Excel format data converted from Spool data
    "call GUI down Load by passing  it_xls_spool
    Prabhudas

  • How to download data from the icloud?

    How to download data from the icloud?

    Settings>General>Reset>reset all content and settings. When iPhone restarts you will guide to restore from iCloud backup

  • How to provide a button in bsp that downloads data from SAP into powerpoint

    hi,
    how to provide a button in bsp that downloads data from SAP into powerpoint
    this absurd requirement is needed by my client.
    thanks
    saad

    Hi,
    Look at tools like the things mentioned above or things like
    http://www.investintech.com/products/developer/creatorsdk/creatorsdkmain/
    http://command-line-image-converter.qarchive.org/
    You need to look for tools that can run via the command line and thsu be executed as external command (http://help.sap.com/saphelp_nw2004s/helpdata/en/fa/0971d4543b11d1898e0000e8322d00/frameset.htm)
    Eddy
    PS. Reward the useful answers and you will get <a href="http:///people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself!

  • How to download data from abap-ouput to excel sheet with logo

    how to download data from abap-ouput to excel sheet with standard logo
    Edited by: Harish Kasyap on Nov 18, 2008 8:19 AM
    Edited by: Harish Kasyap on Nov 18, 2008 8:20 AM

    For saving the report you can goto System -> List -> Save -> Local File -> Location where you want to save in your presentation server.
    You can also give a option in your selection screen to save the file to Presentation server using FM GUI_DOWNLOAD.
    Hope it helps.
    Thanks,
    Jayant.

  • How do I download data from my iphone 4 to a pc ??, How do I download data from my iphone 4 to a pc ??

    How do I download data from my iphone 4 to a pc ??

    Are you actually trying to download or sync? You need to try and explain a little better what it is you are trying to do with the phone for someone to help. What data or what are you trying to do.

  • Downloading data from internal table to xls file leading zeros are not disp

    Hai abap gurus,
    when i am downloading data from internal table to excle file. some field values in a column are with leading zeros and some others dont have leading zeros.but in the output it is showing without leading zeros. then how to get with exact values.
    Ex:
    <b>ECC Code.</b>
    045234
      88567
    098456 
    but output is giving like this:
    45234
    88567
    98456
    how to get the actual values.....
    plz help me in this matter.

    Dear Kiran,
    Those field in the internal table having Leading Zeroes, make those fields' datatype as character.
    Then use the function module to download the content of the internal table to the excel file.
    Regards,
    Abir
    Don't forget to Reward Points  *

  • Download data from memory to Excel format.

    Hi Gurus,
        How can I download data from Memory( not in application server ) to Excel format ? Now I am using below function modules  but not coming in proper format.
    CALL FUNCTION 'LIST_FROM_MEMORY'
           TABLES
                listobject = listobject
           EXCEPTIONS
                OTHERS     = 1.
    CALL FUNCTION 'LIST_TO_ASCI'      "report to ASCII text
             TABLES
                  listasci           = listasci
                  listobject         = listobject
             EXCEPTIONS
                  empty_list         = 1
                  list_index_invalid = 2
                  OTHERS             = 3.

    Hi,
    use this function module.
    CALL FUNCTION  'SAPGUI_PROGRESS_INDICATOR'
    Regards,
    NNR.

  • Problem with downloading data from cube into flatfile

    Hi,
    I am writing a program to download data from cube into flatfile .The program will be run in the background with user has given his selection in a table.the program works fine .The current problem which i am facing is the character length.e.g. Material is 18 ..but in my dynamic internal table it store the value of material with length of 10 character.
    So i am not able to see the output material in correct format.Anybody knows how to change this format.
    thanks in advance
    Yogesh Mali

    Hi Yogesh,
    Theorethically, you can setup the material code length in TX OMSL, which uses the TMCNV table.
    Why don't you change the structure of your internal table changing material fiela length from 10 to 18?
    Best regards,
    Eugene

  • Error while downloading data from internal table into XML file

    hi all,
    i developed a program to download data from into internal table to xml file like this.
    tables: mara.
    parameters: p_matnr like mara-matnr.
    data: begin of itab_mara occurs 0,
                matnr like mara-matnr,
                ernam like mara-ernam,
                aenam like mara-aenam,
                vpsta like mara-vpsta,
          end of itab_mara.
    data: lv_field_seperator type c,     " value 'X',
          lv_xml_doc_name(30) type c,    " string value ‘my xml file’,
          lv_result type i.
          lv_field_seperator = 'x'.
          lv_xml_doc_name = 'my xml file'.
    types: begin of truxs_xml_line,
              data(256) type x,
          end of truxs_xml_line.
    types:truxs_xml_table type table of truxs_xml_line.
    data:lv_tab_converted_data type truxs_xml_line,
         lt_tab_converted_data type truxs_xml_table.
    data: lv_xml_file type rlgrap-filename value 'c:\simp.xml'.
    select matnr ernam aenam vpsta from mara into table itab_mara up to 5
           rows where matnr = p_matnr.
    CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
    EXPORTING
       I_FIELD_SEPERATOR          = lv_field_seperator
      I_LINE_HEADER              =
      I_FILENAME                 =
      I_APPL_KEEP                = ' '
       I_XML_DOC_NAME             = lv_xml_doc_name
    IMPORTING
       PE_BIN_FILESIZE            = lv_result
      TABLES
        I_TAB_SAP_DATA             = itab_mara
    CHANGING
       I_TAB_CONVERTED_DATA       = lt_tab_converted_data
    EXCEPTIONS
      CONVERSION_FAILED          = 1
      OTHERS                     = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    open dataset lv_xml_file for output in binary mode.
    loop at lt_tab_converted_data into lv_tab_converted_data.
    transfer lv_tab_converted_data to lv_xml_file.
    endloop.
    close dataset lv_xml_file.
    this program is syntactically correct and getting executed, but when i open the target xml file it is showing the following error.
    The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    XML document must have a top level element. Error processing resource 'file:///C:/simp.xml'.
    will anyone show me the possible solution to rectify this error
    thanks and regards,
    anil.

    Hi,
    Here is a small sample program to convert data in an internal table into XML format and display it.
    DATA: itab  TYPE TABLE OF spfli,
          l_xml TYPE REF TO cl_xml_document.
    * Read data into a ITAB
    SELECT * FROM spfli INTO TABLE itab.
    * Create the XML Object
    CREATE OBJECT l_xml.
    * Convert data in ITAB to XML
    CALL METHOD l_xml->create_with_data( name = 'Test1'
                                         dataobject = t_goal[] ).
    * Display XML Document
    CALL METHOD l_xml->display.
    Here are some other sample SAP programs to handle XML in ABAP:
    BCCIIXMLT1, BCCIIXMLT2, and BCCIIXMLT3.
    Hope this helps,
    Sumant.

  • Problem: Unable to retrieve workflow data from MDM repository

    This is a new MDM installations scenario for version 5.5 SP05 (5.5.40.83).
    After installing MS Visio, finding problems connecting it with the MDM Data Manager. After doing MDM workflow installations, able to initiate the MS Visio Workflow from MDM Data Manager and can see the Pane-MS Visio Workflow Stencil but not the able to see the Pane-MS Visio Workflow Stencil Details that appears below the Pane-MS Visio Workflow Stencil. Secondly geting a pop-up with the error message as - 'Unable to retrieve workflow data from MDM repository.'
    I have added a parameter Mail Server=MailServerIPAddess (the existing IP addr), but it hasn't helped.
    Can any one please help me in this !

    Hi
    As Felix mentioned, it might be a version compatibility problem.
    You have also mentioned that mail server is not working for that  do this
    Mailserver = SMTP server.company.com ( ex. Mail.company(xxxxx).com)
    MDM workflow notify task is working after rebooting the Machine. So the rule is after making changes to MDS.ini file reboot the machine ,to observe the consequence of configurable changes.
    If u need anything this let me know.
    Regards
    Hari

Maybe you are looking for