Regarding JS password alert function.

Hi
If anybody has seen the console screen of weblogic6.0, when you try to go
console of running weblogic, it prompts you for user-id and password alert
box. I would like to implement the same thing for my website. Can anybody
point me from where i can get source code for that JS function or which JS
utility function it is?
Thanks
Ashish Jain

Thats not a JS(JavaScript). Thats a function of the webserver or the application
server.
In the case of WL, you have to set the security constraints for the pages you
wish to protect.
If its an apache webserver, you have to set the .htaccess files and the apache
properties. See Apache or your web server documentation.
Regards
John
"Ashish Jain" <[email protected]> wrote:
Hi
If anybody has seen the console screen of weblogic6.0, when you try to
go
console of running weblogic, it prompts you for user-id and password
alert
box. I would like to implement the same thing for my website. Can anybody
point me from where i can get source code for that JS function or which
JS
utility function it is?
Thanks
Ashish Jain

Similar Messages

JavaScript Alert functionality in PL/SQL

I'm in need of implementing the JavaScript "Alert" functionality (display message and wait for user to acknowledge) in the "before displaying the page" PL/SQL block of portal reports and forms. While I'm at it - How about the JavaScript "history.back" function as well?
Is this possible? Can you point me in the right direction.

Hi,
Where Portal says "before displaying the page" what it means is that it will run this code before it starts to htp.p() out the HTML of the page.
In WebDB this was actually what happened, in Portal there are some elements of HTML output BEFORE this block of code is run.
Anyway I don't think that you can have an alert that displays before the page is loaded. The page will still show behind the alert.
To get around this you would need a blank page to show your alert that forwards you on to the required page.
The history function can be called by the onclick event of a button or you can access Javascript through an anchor tag:-
link text
Regards Michael

Using mySQL Password encryption function

hi there,
I am using mySQL's password encryption function to store passwords
safely in a tabe. The problem is when I retreive the username and password, because the password in encrypted, it won't match the password entered in a JSP page. Is there any way I can decrypt it to its original form so I can do a equal match comparision.
thanks
mani

For Eg. you can compare the following way...
Here,
userdb - table name
pwd - Column in table (password encrypted field)
'userpassword' - user entered value....
theSql = "SELECT PASSWORD('userpassword'), pwd FROM userdb
rs = statement.executeQuery(theSql);
if (rs.next())
String strPswdEnter=rs.getString(1);
String strPswdData=rs.getString(2);
if (strPswdEnter.equalsIgnoreCase(strPswdData))
bPasswordCorrect=true;
Regards,
Chandramohan V

Alerts functionality and atributes in SCOM

Hi All,
I need to understand the SCOM alerts behaviour and its alerting functionality. I have the following questions in my mind. Please help me if already answerd by anyone.
1. What is the frequency of generating same alerts in SCOM.
2. Suppose I get a alert name "Application Pool is stopped" at 1:00 AM
in SCOM and after five hous I came to know that Application pool is still in Stopped state. in this case would SCOM generate repeated alerts for me and remind me through emails ? What is the frequency for repeated alerts?
3. If action is not taken by repective application/service owner in that case do we have any such machenaism for generating frequent alerts for critical service and remind the team by sending emails?
4. What is the meaning of below atributes in SCOM alert monitoring console
A) Created
B) Last State Change
C) Last Mondified
D) Latency
E) Repeat Counts
If we have any pre writen article please let me know. It would be very helpful for me.
Thanks is Advance

Hi,
When we create a monitor to monitor a specific event ID, then without Aler suppression set, every time we get the event id then we will recieve an alert. So we usually use Alert Suppression, once we set the suppression and if the alert is still
existing the repeat count would get increased.
Please also refer to the below links for more about alert:
http://technet.microsoft.com/en-us/library/hh457540.aspx
http://technet.microsoft.com/en-us/library/hh212847.aspx
Regards,
Yan Li
Regards, Yan Li

Extend Password Change Functionality

Is there a way to extend the Password Change functionality in Access Manager to envorce a more complicated password scheme - upper case, lower case, special characters, etc? The password policy appears to not allow specifying more complicated password enforcement schemes.
Thanks,

This needs a small modification to the JSP and/or the action class.
The usual effort estimate is 2-4 days for a resource with experience on how to do this. 2-4 weeks for a resource that hasn't done it before.
Best regards
/Martin

Release_18 Oracle CRM- Alerts Function Issue

Hi All,
Currently, I am doing the testing in my staging envirnoment for R-18, I found the issue regarding "Alert function".
Creating an alert and updating it doing well, but i found that alert is still being displayed at homepage even after
the expiration date has reached.
Could you please suggest how to fix it?
Thanks
Preeti

not sure that is the problem:
SQL> create table foo (mr_clob clob);
Table created.
SQL>
SQL> insert into foo values ('testing'||chr(10)||'testing');
1 row created.
SQL>
SQL> select replace(mr_clob,chr(10),'blah') from foo;
REPLACE(MR_CLOB,CHR(10),'BLAH')
testingblahtesting
1 row selected.

Password reset function--Need to send the sap userid+NT email address

Hi experts,
We would like to implement the password reset function in one of our systems. we have the existing code, which accepts <b>sap-user id</b> , resets the password and sends email to the user. Now the loophole is anyone can reset the password of others if he/she knows the <b>sapuserid</b>.
1. Is there any solution for this.
2. Can we pass the (sapid+NT email address) to the SAP system, when we enter <b>sap id</b> and press submit in the UI.
Please advice...
Thanks,
Harini

Hi chimsik K:
Excellent, SAP 4.7E is built on WAS6.20 you can enable the SMTP plug-in; follow the steps mentioned in the following OSS Note 455140, let me know if you have additional questions.
https://websmp210.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700011536752001
Regards,
Federico

? regarding resetting password in Airport Wireless Network.

? regarding resetting password in Airport Wireless Network.
I am using comcast cable and have a netgear wireless router to access the internet. In my airport network preferrences I have a network name and a password which is working well on my brand new Macbook. However, I would like to use this same network for my old ibook G4 and here is the problem.
When I open the airport on the ibook I scroll through the list pick my network name and then it opens "the selected airport network requires a password to join" and asks for my password. It gives the wireless security " WPA personal" and asks for a password only.
I enter the password and it says it is not correct.
What could be going wrong with this??
Can I reset the password on the new Macbook and resolvethe problem?
Any info. would be appreciated.

Most likely I'm thinking that the Netgear router is using something other than WPA personal (WPA enterprise, WPA 2 comes to mind...) and that your iBook's Airport card doesn't support this later encryption. Try going into your router's setting and changing the security settings. (Although some may argue that this poses a greater security risk. Just avoid WEP and you should be good.)

I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought.

I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought. I connected my iPhone to my computer and sync'd it hoping that it could download my purchases from the itunes store and then put them back on to my phone but no such luck. When i look at my iphone on my computer and look at tones, they do not show up at all. However, if i click on the "On This iPhone" tab and click on "Tones" the deleted ringtones and altert tones show up...they are just grey'd out and have a dotted circle to the left of them. I also tried to go to the iTunes store on my phone and redownload them and it tells me that i have already purchased this ringtone and asks me if i want to buy it again. I press Cancel. I know when i do that with music it would usually let me redownload the song without buying it again but it wont let me with the ringtones...so how do i get them back? any help would be greatly appreicated

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Is there a way to use SPD workflow to enhance the alert function in a SharePoint list?

I have a request to achieve this:
the Alert function in a list only allows a user to get alert when anything changes or created, but there is no way to specify notification before a certain field date. For Example, users want to be able to choose to receive a reminder
10 days before expiry date.
The requirement:
1) A user can set a reminder if they wish - so cannot be systematic automatic reminder
2) A user can choose how many days before expiry to receive reminder
I tried workflow by adding additional columns to set the user name to receive reminder and # of days before expiry day to send reminder. But that setting can only apply to one user at time, and the user has to set one item at time, e.g. if user A sets
5 days prior for the reminder on an item. then user B changed it to 4 days, then user A's setting if overwritten.
So this is really a customization of the alert function, but wonder if it can be achieved by workflow created in SPD (or NinTex?)
Thanks in Advance for any tips!

One option i can think of is, you can set the Create and Edit access: in Advanced Setting from List setting to Create items and edit items that were created by the user, so that other users can't override the items created by other
users.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

HT4641 Does pages have a document password protection function

Does pages have a password protection function since adobe PDF for IPhone3gs or IPad2 does not?

If you were to think laterally about this, you could also create encrypted archives for just those folders or files you were interested in to minimise the possible harm. Similar to the disk images Magnus suggested, but slightly less trouble. Modern Macs are very fast at unarchiving these files so you can work on them then archive them again without too much trouble.
I am a great fan of those tiny USB harddrives and thumbdrives, which easily slip into your pocket so you can take them with you.
My backup consists of a set of three 4Gb USB thumbdrives for my documents and 3 differently colored USB harddrives for my larger material.
If your work is on these, you simply detach them from your computer and keep them locked up or on your person.
Nobody will be able to access those without bailing you up.
… And of course you can use a combination of any and all of the above suggestions.

ALERT FUNCTIONALITY IN SAP

We need an ALERT functionality is SAP, just like it happens when a new mail comes in on Outlook.This ALERT MESSAGE must inform us whenever a new Z transaction is created on Table TSTC.
Any Ideas????

You could create a custom table to basically replicate a list of all the Z transactions. You should maintain this manually.
Then have a program that runs every so often (once an hour if you're really paranoid, once a day would probably be sufficient) that compares the two tables. The program could send you an e-mail or a page or something if it finds a discrepancy.

Password not functioning even resetting non-functional

password not functioning even resetting non-functional need to convert pdf and word docs

Hello David,
It looks like you have a subscription to our ExportPDF service, not the CreatePDF service. Were you able to log into ExportPDF here: http://exportpdf.acrobat.com/signin.html ?
-David

Using JSP variable inside Java Script's alert function.

Hi Gurus,
We are trying to use alert function with one of the string variables populated inside JSP code, but its not working.
Here is the code snippet, please advice.
     <%
     oracle.apps.qot.util.RequestCtx.log("qotcustom.jsp",AOLMessageManager.getMessageSt(QotUtil.QOT_APPS_CODE, "XDPYY_DISC"));
     %>
     var alert_text="<%=AOLMessageManager.getMessageSt(QotUtil.QOT_APPS_CODE, "XDPYY_DISC")%>";
     alert(alert_text);
     Here in the first line we are using API to get text message defined in database, the line is getting executed properly and we could see output text message in debug log file, after this in the 4th line, we are assiging this string output of API to java script variable alert_text and further using alert function with the variable alert_text as argument. But alert function is failing, no errors are thown in debug log file.
Please advice whether we are doing any thing wrong.
Thanks in advance.

What pgeuens means is that you can't mix javascript and jsp/java code in this way.
ALL of the jsp/java code gets executed at the server end.
This produces an HTML page (with embedded javascript) which gets sent to the client.
The client then runs javascript code in response to events (onLoad, onClick, onChange etc etc)
So in this case, the jsp:forward will always be executed, because as far as the server is concerned, the javascript is just template text.
If you WANT to do a conditional forwarding on the server side you do it in java ie (horribly using scriptlet)
<%
if (testCondition){
%>
<jsp:forward>
%<
%>Or if you want to test what the client has entered client side, all you can do is submit the form, or navigate to a URL
<script>
function test()
if(document.f.htemp.value=="true")
alert("jus");
else
var s=document.f.htemp.value;
alert(s);
document.f1.action="success.jsp";
document.f.submit();
</script>You cannot run JSP code based on your javascript code.
Java. Javascript. Not the same thing.
Hope this helps,
evnafets

Regarding sending email alert through RFC

Hi,
Iam creating an email alert to my Alert Inbox via RFC when Message mapping error occurs and I created a UDF which contains the following code
public void UDF_ALERT (String[] message,String[] Category,ResultList result,Container container){
try {
Channel channel = LookupService.getChannel("RS6CLNT800","CC_UDFALERT_RFC");
RfcAccessor accessor= LookupService.getRfcAccessor(channel);
String rfcxml="<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns0:SALERT_CREATE xmlns:ns0=\"urn:sap-com:document:sap:rfc:functions\"><IP_APPLICATION_GUID/> <IP_CAT>ALERT_MESSAGE_MAPPING</IP_CAT> <IT_CONTAINER><item><ELEMENT>SXMS_ERROR_CODE</ELEMENT> <TAB_INDEX>0</TAB_INDEX> <ELEMLENGTH>250</ELEMLENGTH> <TYPE>C</TYPE> <VALUE>node not available</VALUE> </item> </IT_CONTAINER></ns0:SALERT_CREATE>"; //Generate XML Structure......
InputStream inputStream= new ByteArrayInputStream(rfcxml.getBytes());
XmlPayload payload = LookupService.getXmlPayload(inputStream);
Payload rfcOutPayload = null;
rfcOutPayload = accessor.call(payload);
catch(LookupException e)
throw new RuntimeException(" Error in raising Alert", e);
but still Iam not getting mail to my Alert Inbox
and I created my Alert Category in R/3 system.Is it fine...
please help me reagrding my UDF and also anything further needs to be done

hi vikram,
just see the below blog which explains how to trigger alerts from UDF using RFC(if you didnt see this blog yet)
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
also have a look at the following links to see how to define alert category, alert rule etc properly
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
http://help.sap.com/saphelp_nw04/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
To test if your Alerts have been defined correctly, go to SE38. type RSALERTTEST and then click on execute it will ask you for your ALERTCATEGORY, give the name of your ALERT CATEGORY and click execute.
If you configured alerts properly you will get a message that tells "alert is generated" and will give the ALERT ID.Now, go to RWB open ALERT INBOX and see if you have got the alert message in your ALERT INBOX.
Kind Regards
Francis

Regarding JS password alert function.

Similar Messages

Maybe you are looking for