Regarding logical data base tables
i am working on abap-hr. i want to know how to retrieve data from two different hr-database tables to two different internal tables and then send it to final internal table.can any one plz give me sample hr code.
your help is rewarded with points
bye
rad
Hi
If you are using logical databases, then you don't have to give any SELECT statement.
1. For getting the personnel number, you use PNP logical database.
2. Declare infotypes of the 2 tables from which you need to fetch data, say for 0000, 0001.
3. Use the event GET PERNR in START-OF-SELECTION.
when you do this, an internal table will be created and will be populated with all pernr for the declared infotypes in P0000, P0001.
4. at the event END-OF-SELECTION, GET PERNR will be triggered and next pernr will be fetched and the internal tables with that pernr will be populated.
You can use these internal tables for getting the desired records by using the macros,
RP-PROVIDE-FROM-LAST ......
SAMPLE CODE:
infotypes: 0000, 0001, 0002.
tables: pa0000, pa0001, PERNR.
data: begin of itab occurs 0,
end of itab.
Start-of-selection
START-OF-SELECTION.
GET PERNR.
RP-PROVIDE-FROM-LAST P0001 SPACE PN-BEGDA PN-ENDDA.
if no record is found then exit
IF PNP-SW-FOUND = 1.
ITAB-PERNR = PERNR-PERNR. "Emp no
ITAB-BUKRS = P0001-BUKRS. "Company code
ITAB-WERKS = P0001-WERKS. "Personnel area
ITAB-BTRTL = P0001-BTRTL. "Personnel sub-area
RP-PROVIDE-FROM-LAST P0002 SPACE PN-BEGDA PN-ENDDA.
if pnp-sw-found = 1.
ITAB-VORNA = P0002-VORNA.
ITAB-NACHN = P0002-NACHN.
endif.
ELSE.
EXIT.
ENDIF.
append itab.
END-OF-SELECTION.
this will fetch the last record. if you need to fetch all records then you can loop P0001 and get the values for that particular pernr.
loop at P0001.
itab-pernr = pernr-pernr.
itab-werks = P0001-werks.
endloop.
Regards,
Navneeth
PS: If not clear, please let me know.
Message was edited by: Navneeth Saraogi
Similar Messages
-
Logical Data base MSM vs Material master table MARA/MARC
Hi Experts,
What is the different between the logical data base (LDB) and the normal SAP table, for example MSM vs MARA/MARC/MBEW table. ? I mean we usually refer data to the normal SAP table in download or ABAP, what is the use of logical data base (exp MSM Material master) can download data or refer to MSM in ABAP?? Please help.
Best regards,
EricA logical database provides a particular view of database tables in the R/3 System. It is always worth using logical databases if the structure of the data that you want to read corresponds to a view available through a logical database.
-
Logical Data Base to be used in the QUICKVIEWER
hello Abappers,
My client cannot select text fields using SQVI so he wants me to come up with a way for him to do so. I was thinking of creating a logical data base which can be selected in SQVI. I could build the FM READ_TEXT into the QV but what I need clarification on is outputting the text fields because the logical data base is really a set of table joins and since I am using the QV I do not have the flexibility that I would have if I was using a logical data base in a program.
Please advise if anybody has any ideas on this approach and how I would structure the output.
regardsHi Santhosh,
Since you say you are a beginner, lets start this way, hopefully U know from what datasources in ECC or R/3 you are supposed to load data from. Once you are sure about it, then follow this steps.
1) Go to RSA5 transaction in ECC or R/3 System ( source system ).
2) Select the specific datasource from which data is to be extracted to BI and press Activate Datasources button on the top right.
3) Then on check whether this datasource is available in RSA6 screen.
4) Come to BI system, there go to the Source Systems screen, there select the specific Source System (ECC or R/3).
Go to U'r specific Infoarea i.e., SCM in that select the datasource for which U are supposed to extract data, right click and select Replicate Metadata.
5) Once replication is done now right click again on datasource and create and run the infopackage , if its BI 7.0 data will be extracted till PSA.
6) After this create Transformation by right clicking on the Datasource again. Since I guess U will be using standard datasource U will get automatic transformations between the source fields and the infoobjects. Activate Transformations.
7) After this Create a DTP process by again right clicking on the Datasource. Here U specify the Data Target to which data is to be loaded.
8) Activate the DTP, once that's done successfully, Execute the DTP by clicking the Execute Button in the DTP.
9) Monitor U'r data loading thru Monitor screen.
Hope this helps.
Regards,
Syed -
How to stored data after clicking checkbox in data base table
REPORT ZT .
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP,ZTABLE.
Types:BEGIN OF tp_data,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA: WA TYPE TP_DATA.
MODIFIED*******************
*data: t_data like Y00_MM_ISSUE_DAT occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA : V_REPID LIKE SY-REPID.
MODIFIED*******************
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
*========================== Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
MODIFIED*******************
INITIALIZATION.
V_REPID = sy-repid.
MODIFIED*******************
*=========================== Event Blocks
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
*=========================== Subroutines
*& Form get_data
Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mard~lgpbe
msegcharg msegbwart mkpf~budat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
t_event TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
2 'MATNR' 'MATNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
3 'WERKS' 'WERKS' 'MARD' space space space space space space
space space space space space space t_fieldcat,
4 'LGORT' 'LGORT' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
5 'LGPBE' 'LGPBE' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
6 'CHARG' 'CHARG' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
7 'BWART' 'BWART' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space
space space space space space space t_fieldcat,
9 'MENGE' 'MENGE' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
10 'MEINS' 'MEINS' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = V_REPID
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname
p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data
*element.
If p_ref_tabname is given, the ref_fieldname given is a field of a
*table. In case ref_fieldname is not given, it is copied from the
*fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
wa_fieldcat-INPUT = 'X'.
wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'TRVPICTURE04'
it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
case sy-ucomm.
WHEN '&DATA_SAVE'.
LOOP AT IT_DATA INTO WA WHERE ENDKZ = 'X'.
IF WA-ENDKZ = 'X'.
*******MODIFIED*********************************
U DELETE THIS CODE N USER UR INSERT CODE TO CHECK
SY-MSGV1 = WA-MBLNR. " U CAN DELETE
SY-MSGV2 = WA-MATNR. " U CAN DELETE
MESSAGE ID 'BC_BOR' TYPE 'I' NUMBER '888' " U CAN DELETE
WITH SY-MSGV1 SY-MSGV2. " U CAN DELETE
*******MODIFIED*********************************
INSERT ZTABLE.
ENDIF.
endloop.
ENDCASE.
ENDFORM. "user_command
this is my code, database will stored in fields only.data is empty,
how to slove that one,send any sugestion.Hi Lakshmi,
Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram... -
How to stored data after clicking check box save in data base table
TABLES:mseg,mard,mkpf.
TYPE-POOLS:slis.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
DATA:BEGIN OF itab OCCURS 0,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
checkbox TYPE c,
END OF itab.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
gw_fieldcat TYPE slis_fieldcat_alv,
gt_layout TYPE slis_layout_alv.
START-OF-SELECTION.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO TABLE itab FROM
mseg JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
IF sy-subrc EQ 0.
SORT itab BY matnr.
PERFORM display_alv_output.
ENDIF.
*& Form display_alv_output
text
--> p1 text
<-- p2 text
FORM display_alv_output.
REFRESH gt_fieldcat.
gw_fieldcat-fieldname = 'MBLNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 1.
gw_fieldcat-seltext_m = 'material document'.
gw_fieldcat-key = 'x'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MATNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 2.
gw_fieldcat-seltext_m = 'material'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'WERKS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 3.
gw_fieldcat-seltext_m = 'plant'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGORT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 4.
gw_fieldcat-seltext_m = 'storage location'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGPBE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 5.
gw_fieldcat-seltext_m = 'storage bin'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'CHARG'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 6.
gw_fieldcat-seltext_m = 'Batch number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BWART'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 7.
gw_fieldcat-seltext_m = 'Movement Type (Inventory Management)'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BUDAT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 8.
gw_fieldcat-seltext_m = 'Posting Date in the Document'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MENGE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 9.
gw_fieldcat-seltext_m = 'QUANTITY'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MEINS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 10.
gw_fieldcat-seltext_m = 'Basic unit of measure'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'KOSTL'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 11.
gw_fieldcat-seltext_m = 'Cost center'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'AUFNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 12.
gw_fieldcat-seltext_m = 'Order Number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'RSNUM'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 13.
gw_fieldcat-seltext_m = 'Number of Reservation / Depe'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-col_pos = 14.
gw_fieldcat-fieldname = 'CHECKBOX'.
gw_fieldcat-seltext_m = 'Compltd'.
gw_fieldcat-checkbox = 'X'.
gw_fieldcat-edit = 'X'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZREPORT'
IS_LAYOUT = gt_layout
IT_FIELDCAT = gt_fieldcat
TABLES
t_outtab = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. " display_alv_output
this is mycode .
send me replay.Hi Lakshmi,
Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram... -
Logical data base for license revenue report.
Hi All,
My requirement is to create "license revenue report through SAP Query with following fields:
VBAK:
Sales Document,Sales Doc type,net value of sales order in document,sales org,distribution channel,division,sales office,business area,customer purchase order number,customer purchase order date,sold to party.
VBAP:
Sales document item,target quantity in sales units,target quantity in UOM,usage indicator,billing block for item,business area,plant(own or external),
origin of bill of material,net price,SD document currency,material pricing pgroup,account assignment group for this material,activity type,personnel number.
VEDA:
contracts start date,contract end date,date on which contract is assigned.,installation date,agreement acceptance date
VBREVK:
clearing account for accrued revenues,clearing accountkey(offsetting account),total accrued value,currency key,amount in document currency,posting year and posting period.
VBREVE:
revenue amount,currency key,accrual period,company code,country of destination,profit center,posting year and posting period,amount in document currency,gl account,account for deferred revenue,account for non billed receivable
Is there any standard logical data base which gives all the required fields mentioned above? since i am not SD consultant i am not sure whether i have to take only above tables exactly or not
there are certain logical databases like SD_ORDER,SD_SALES_DOCUMENT which has tables VBAK,VBAP,VEDA but i am unable to join remaining tables VBREVE and VBREVK with those logical data bases
Please provide some valuable suggestions on this.
Thanks&RegardsHi All,
My requirement is to create "license revenue report through SAP Query with following fields:
VBAK:
Sales Document,Sales Doc type,net value of sales order in document,sales org,distribution channel,division,sales office,business area,customer purchase order number,customer purchase order date,sold to party.
VBAP:
Sales document item,target quantity in sales units,target quantity in UOM,usage indicator,billing block for item,business area,plant(own or external),
origin of bill of material,net price,SD document currency,material pricing pgroup,account assignment group for this material,activity type,personnel number.
VEDA:
contracts start date,contract end date,date on which contract is assigned.,installation date,agreement acceptance date
VBREVK:
clearing account for accrued revenues,clearing accountkey(offsetting account),total accrued value,currency key,amount in document currency,posting year and posting period.
VBREVE:
revenue amount,currency key,accrual period,company code,country of destination,profit center,posting year and posting period,amount in document currency,gl account,account for deferred revenue,account for non billed receivable
Is there any standard logical data base which gives all the required fields mentioned above? since i am not SD consultant i am not sure whether i have to take only above tables exactly or not
there are certain logical databases like SD_ORDER,SD_SALES_DOCUMENT which has tables VBAK,VBAP,VEDA but i am unable to join remaining tables VBREVE and VBREVK with those logical data bases
Please provide some valuable suggestions on this.
Thanks&Regards -
Creation of field in data base table
Hi,
I want to create a field in data base table , which holds the float values but i don't want to use the FLTP data type, why bcoz if i use this data type in selection screen of the table the the field is not appeqring, i dont want to go for the option QUAN bcoz there i need to define the ref table and ref field.
please explain what is the way to create this field.
regards
KrishnaUse NUMC
Awrd POints if useful
Bhupal -
SAP QUERY -logical data base ADA
I have created a SAP Query with logical data base ADA,I have selected four tables in it.Do i need to link these tables if yes..where and how?The report is for fields in asset master data.
.But i get below error when i try to genaret the output :
Fields from parallel tables within a line
Line: 01
Field: Asset description
(ANLT-TXT50, table ANLT)
Field: License plate no. of vehichle
(ANLZ-KFZKZ, table ANLZ)
i get such similar five messages but they are warning..when i execute with warning however i get the fields with description but not with Value.Ex:i get asset description and not Asset number as required.You don't have to link them, they ar linked that is the power of a logical data base
To get the text in your report you need the key fields
Like
(Lanque Key)
company code
asset number
Asset sub number
Go to info sets and look to the standard ones like /SAPQUERY/AM01 -
How to insert data from different internal table into a data base table
hi all,
I want to insert a particular field in an internal table to a field in a data base table.Note that the fields in the internal table and database table are not of the same name since i need to insert data from different internal tables.can some one tell me how to do this?
in short i want to do something like the foll:
INSERT INTO ZMIS_CODES-CODE VALUE '1'.
*INSERT INTO ZMIS_CODES-COL1 VALUE DATA_MTD-AUFNR .(zmis_codes is the db table and data_mtd is the int.table)REPORT ZINSERT.
tables kna1.
data: itab LIKE KNA1.
data lv_kUNAG LIKE KNA1-KUNNR.
lv_kuNAG = '0000010223'.
ITAB-kuNNR = lv_kuNAG.
ITAB-name1 = 'XYZ'.
INSERT INTO KNA1 VALUES ITAB.
IF SY-SUBRC = 0.
WRITE:/ 'SUCCESS'.
ELSE.
WRITE:/ 'FAILED'.
ENDIF.
Here lv_kunag is ref to kna1 kunnr passed in different name
In internal table .
Try and let me know if this logic dint work. -
Sales order purchase order field is updated with dots in data base table
HI
we have problem in Production when sale order created
P O date is update with dots and these dots we are unable to see at screen and data base table
we go t change mode of the order and delete the P O field with back space (button) and saving the order
when we see the change log of the order
there it is sowing
Old value = " . . "
New Value = " 00.00.0000"
Can any one give the suggetions to come out of this problem
This is we have noticed with only two customers
Thanks and regards
Kishore
Edited by: DevarapalliKK on Oct 23, 2010 8:43 PM
Edited by: DevarapalliKK on Oct 23, 2010 8:44 PMHi Kishore,
Two things could have happened:
1) Since this is happening with only two customers - I am sure it has got to do with some custom code on your system which is causing this problem. I 'd suggest you to create a new order with all the fields
2) It could be a bug with SAP- might want to check relevant SAP Notes. ( But this could not be a reason, if yes should have had the same prob with all cusotmers)
regards
sadhu kishore -
Error while fetching data from Logical data base
Hi All,
I need to fetch the data from Logical data base DDF.First when i am trying demo code
REPORT demo_program_read_tables_2.
NODES: spfli, sflight.
GET spfli FIELDS carrid connid cityfrom cityto.
WRITE: / spfli-carrid,
spfli-connid,
spfli-cityfrom,
spfli-cityto.
GET sflight FIELDS fldate.
WRITE: / sflight-fldate.
I am getting error like ""spfli is not a node of the logical data base __S""
Should i declare anything esle?
MadhuREPORT demo_logical_database.
DATA wa_spfli TYPE spfli.
SELECT-OPTIONS s_carr FOR wa_spfli-carrid.
DATA: callback TYPE TABLE OF ldbcb,
callback_wa LIKE LINE OF callback.
DATA: seltab TYPE TABLE OF rsparams,
seltab_wa LIKE LINE OF seltab.
callback_wa-ldbnode = 'SPFLI'.
callback_wa-get = 'X'.
callback_wa-get_late = 'X'.
callback_wa-cb_prog = sy-repid.
callback_wa-cb_form = 'CALLBACK_SPFLI'.
APPEND callback_wa TO callback.
CLEAR callback_wa.
callback_wa-ldbnode = 'SFLIGHT'.
callback_wa-get = 'X'.
callback_wa-cb_prog = sy-repid.
callback_wa-cb_form = 'CALLBACK_SFLIGHT'.
APPEND callback_wa TO callback.
seltab_wa-kind = 'S'.
seltab_wa-selname = 'CARRID'.
LOOP AT s_carr.
MOVE-CORRESPONDING s_carr TO seltab_wa.
APPEND seltab_wa TO seltab.
ENDLOOP.
CALL FUNCTION 'LDB_PROCESS'
EXPORTING
ldbname = 'F1S'
variant = ' '
TABLES
callback = callback
selections = seltab
EXCEPTIONS
ldb_not_reentrant = 1
ldb_incorrect = 2
ldb_already_running = 3
ldb_error = 4
ldb_selections_error = 5
ldb_selections_not_accepted = 6
variant_not_existent = 7
variant_obsolete = 8
variant_error = 9
free_selections_error = 10
callback_no_event = 11
callback_node_duplicate = 12
OTHERS = 13.
IF sy-subrc <> 0.
WRITE: 'Exception with SY-SUBRC', sy-subrc.
ENDIF.
FORM callback_spfli USING name TYPE ldbn-ldbnode
wa TYPE spfli
evt TYPE c
check TYPE c.
CASE evt.
WHEN 'G'.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ULINE.
WHEN 'L'.
ULINE.
ENDCASE.
ENDFORM.
FORM callback_sflight USING name TYPE ldbn-ldbnode
wa TYPE sflight
evt TYPE c
check TYPE c.
WRITE: / wa-fldate, wa-seatsocc, wa-seatsmax.
ENDFORM. -
How to modify a data base table ?
Hi,
i am working on a list output where if user is editing a field and that field need to be updated in the data base. table is a z table .
the table has 5 fields .
mandt key field
matnr key field
werks key field
charg key field
lgpla key field
usnam
edate
in the list output , the user will change the values in the lgpla field and that field need to be changed in the data base table.
i have used the stmt :
modify< table> from <internal table> ,
but a new record is added in the data base instead of overwriting the existing one.
but the record can be seen modified in the internal table.
kinldy let me know the method of updating or modifying the existing value in the data base.
thanks and regards,
vikram.Hi,
Its not possible to change Primary Key contents in the database.
it mention in documentation of MODIFY Statement,
a line is searched for in the database table that has the same content
in the primary key as the corresponding beginning part of the work area.
If such a line is not found,
a new line is inserted according to the same rules as for the INSERT statement.
If such a line is found,
this line is overwritten according to the same rules as for the UPDATE statement
if you want insert the modified line first Delete from database,Then Use Modify Statement
Regards,
Raghava Channooru -
Which data base tables contain SCM customer code
Friends,
I am writing an user exit for VA01/VA02/VA3/VA32.
I am getting the customer number from VBAK-KUNNR when I execute any of the above transactions.
According to functional sepecification, we can find SCM code in the data base table ADRC.
(we can fetch the data from ADRC table where ADRC-ADDRNR = KNA1-ADRNR; ( KNA1-KUNNR = VBAK-KUNNR))
I could not find SCM customer code in the table ADRC.
Please let me know the Data table and field to find the SCM customer code in SAP.Hi Reddy,
>> As in SCM the company codes exist in the table ' <b>T001</b> '.
Corresponding field for it is ' <b>BUKRS</b> '.
>> U can use ' <b>ADRNR</b> ' as a key field in ' <b>T001</b> ' table and
relate with your <b>KNA1- ADRNR</b> using Joins for user exits.
Feel Free to ask any questions regarding this...
Hope it Helps...
Regards,
Dhayanandh.S
Message was edited by:
DHAYANANDH SIVASANKARAN -
Function module updating the data base table
Hi,
This post is regarding the function module not updating the data base table.
I am calling the FM SD_SHIPMENT_HEADER_CHANGE inside the ZFM. It's returning success an changing the table c_xvttk_new with the new TDLNR value. But it's not updating the Shipment table VTTK-TDLBR or VT02N Forwarding agent.
When I directly updating Forwarding agent in VT02N it's updating fine.
Please let me know what the extra step need to be included to update or COMMIT the FM for updating
Forwarding Agent(VTTK-TDLNR).
Best Regards,
Maheshhi friend,
This link wont five u the complete help but if u ananyse it then it might provide u some idea......
BAPI change shipment doc
regards
kanishak -
Hi
could pls let me know the Tcode to look for the logical data base in sap r/3
Thanks
PHello,
SE36
Regards
Saket Sharma
Maybe you are looking for
-
Help! Installation of Windows 7 Pro 64-bit fails...
I am trying to install Windows 7 Pro 64-bit on my new video system: - I boot the PC with the install CD inserted - I get . the installation screen . accept licence agreement . select on which disk I want to install windows . the copy
-
Connecting to Printers in a Windows Network
So this week I finally got the first Mac in my family. We currently have a PC network set up with three desktops and a few laptops, with one desktop acting as a printer hub. My new computer can connect to the network for Internet capabilities, but it
-
Cannot complete a purchase. Please help!
Hi, I'm unable to purchase a book, card or calendar in iPhoto ll. The Buy 'Book, card or calendar' button is grayed out. How can I resolve this issue? Thank You in advance!
-
I was in the middle of downloading an album and it stopped aftrer the third song.The song list still appears on my screen. I was also charged for it.
-
Problems with server certificate
Hi, i am using Adobe Drive 5.0.2.16 in order to connect to AEM 6 through an SSL connection. According to the Adobe Drive Admin Manual (http://help.adobe.com/en_US/AdobeDrive/5.0/Adobe_Drive_Admin_Guide.pdf), I added the non-trusted certificate hierar