Regarding prompts

if there is three prompts 1.DEPT ->A,B,C,D
2.EMPLOYEE- >1,2..........n
3. Market->1,2..........n
Here depends on the selection in prompt 1.Dept the remaining should need to be display for the second prompt
if the user is selected C from Dept only the correspanding employees should be dispaly in Employee for the next prompt.
From the employee suppose we selected 3 for the C catageory of the Dept then the correspanding markets need to be displayed for further selection.
Depends on the previous prompt selection the next prompts will dispaly accordingly.
Cascading is required who we will able to fix this ?.
Please give me reply ASAP

What tool are you using
Interactive Reporting
Financial Reporting
WebAnalysis
Wayne Van Sluys
TopDown Consulting

Similar Messages

Regarding Prompts a typical requirement

Hi Experts,
I got one typical requirement in prompt level please help me as this is high priority
I have a prompt for customer names here in the prompt if i enter A it as to show all customer names which starts with A from that customer names i have to select names what i want.
If i enter RA it as show customer names starts with RA from all the customers from that list i have to select the name what i want.
Just to make easy selection of customers from huge number of list according to our requirement.
Regards,

Follow this links
http://docs.oracle.com/cd/E23943_01/bi.1111/e10544/prompts.htm#BEIJEJGI
or
http://debaatobiee.wordpress.com/2009/10/04/javascript-in-obiee-to-search-a-report-and-custom-data-format/
If helps pls mark correct

Prompt Parameters are not stored

Hello,
Iu2019m using Desktop Intelligence 12.0.0.0 and I have a problem regarding prompts.
Sometimes the values of the prompts are not stored. Sometimes they are stored an I don't know why.
There will be a really large formula with ~40 prompts . It would be nice if Desktop Intelligence would store the entered values.
The user should not enter all values again if he runs the report again. And/Or the user should have the possibility to change just the prompts which are needed to change.
Which conditions must be fulfilled so that the values of the parameters are stored?
Regards

Hi Sarbhjeet,
Thanks for your answer.
Unfortunately it doesn't work. Now I use the following prompts in a filter:
@Select(PR-Eigenschaften\Pnrstring) like CONCAT('%~1   2',CONCAT(@Prompt('MBV 01','A',{' '},mono,free,persistent) ,'3G%'))
@Select(PR-Eigenschaften\Pnrstring) like CONCAT('%~1   2',CONCAT(@Prompt('MBV 02','A',{' '},mono,free,persistent) ,'3G%'))
@Select(PR-Eigenschaften\Pnrstring) like CONCAT('%~1   2',CONCAT(@Prompt('MBV 03','A',{' '},mono,free,persistent) ,'3G%'))
by the way:
Is this a UDF (Un Document Feature)? Where can I learn more about the Syntax (e.g. the default value).
I downloaded the "xi3_desktop_intelligence_access_and_analysis_guide_en.pdf" but there is no information about the extended syntax.
Thanks

Acrobat Reader DC and Adobe Acrobat XI

My PC automagically updated my Acrobat reader to the new piece of junk they call "Acrobat Reader DC"
It is absolutely useless!
It will not allow to keep the "tools" panel out of view - I have to get rid of it every time a view a document.
It does not allow me to use the installed features of the Adobe Acrobat XI I have installed.
It constantly asks my to sign up to the cloud to do anything Which I do NOT want at all PERIOD.
Then it took me over three hours to find a copy of the original Acrobat Reader 11 with updates to the version previous to this POS.
Is Adobe trying to get rid of customers and go out of business?

Hi Richard,
There are few workarounds here: how to get rid of the right side panel in adobe reader (Acrobat Reader)
to disable the tools pane.
Regarding prompt for cloud storage if you click on the 'x' button then it will not prompt again.
You can also turn off the following from the preferences:
Edit> Preferences> General>
Uncheck the following:
Show online storage when saving the files
Show online storage when opening the files
Show me messages when I launch Acrobat DC
Regards,
Rave

Question regarding Dashboard and column prompt

My question regarding Dashboard and column prompt:
1) Dashboard prompt usually work with only for columns which are in subject area. In my report I've created some of the columns which are based on other columns. Like I've daysNumber column that is based on two other columns, as it calculates the difference of two dates. When I create dashboard prompt I can't find this column there. I need to make a prompt on this column.
2)For one of the column I've only two values 1 and 0. When I create prompt for this column, is it possible that in drop down list It shows 'Yes' for 1 and 'No' for 0 and still filter the request??

Hi Toony,...
I think there was another way of doing this...
In the dashboard prompt go to Show option > select SQL Results from dropdown.
There you need to write your Logical SQL like...
SELECT CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END FROM SubjectAreaName
Here.. Periods.Year is the column which is already exists in repository's presentation layer..
and difference of date functionality is the code or formula of column which you want to show in drop-down...
Also write the CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END code in fx of that prompt.
I think it helps you in doing this..
Just check and inform me if it works...
Thanks & Regards
Kishore Guggilla
Edited by: Kishore Guggilla on Oct 31, 2008 9:35 AM

Regarding Dynamic Dashboard prompts

Hi Gurus,
I have a requirement like this.
In an underlying dimensional hierarchy say for example Time Dimension ...there are 3 calendars hierarchy..
1. gregorian
2. fiscal
3. business.
Each one will be having different number of levels also.
gregorian has 6..starts from Year->Halfyear->Quarter->Month->Week->Day
fiscal has only 4..starts from Year->Quarter->Month->Day
business has only 5..starts from Year->Quarter-> Month->Week->Day
Now the requirement is like this.... the customer wants to have the first prompt which should have these 3 calendars as values... and if they select Gregorian..then the values should go cascaded( cosntrain) to the next level of prompt..
if its gregorian next prompt values should be Half year...based on that, he then selects quarter, then month, week and day..
So here we need to give 6 prompts.
but if the user happens select fiscal ...then after selecting year the next prompt will be quarter...then month and day...so after the 4th level of prompt the last 2 prompts should be blank.
is there any way by which we can hide these last 2 prompts dynamically??
Note: All this is happening the requirement phase and we have not yet got the data to test this.
Any help will be appreciated.
Regards,
D

Hi,
don't know a posibility to hide a column in a prompt, but here is a workaround...
create 4 prompts:
first prompt: type of calendar:
column:
case when 1 = 2 then Time.dummy else '' endwith show SQL results
select case when 1=2 then "Time".Dummy else 'gregorian' end from catalog
union all
select case when 1=2 then "Time".Dummy else 'business' end from catalog
union all
select case when 1=2 then "Time".Dummy else 'fiscal' end from catalogthis prompt will set a variable var_calendar
create another 3 prompts each with all columns that needed for specific type of calendar.
gregorian has 6..starts from Year->Halfyear->Quarter->Month->Week->Day
fiscal has only 4..starts from Year->Quarter->Month->Day
business has only 5..starts from Year->Quarter-> Month->Week->Day
In dashbord put each calandar prompt in different sections and use guided navigation to show only the calendar prompt that you need as selected by first prompt...
you will find here an example on how to use guided navigation
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-selecting-reports-from-dashboard-prompts-and-guided-navigation-sections/
you will use it to hide prompts..
Regards
Nicolae

Regarding callfunction for output device without a prompt for printer name.

Hi,
Is there any call function, for accessing output device, without a prompt for printer name? Can we directly execute the smart form without print popup?
Can anyone suggest me in this regard.
Thanks in advance,
Shwetha Korlepara.

Hi,
Check my code and reward points by clicking the star on the left of reply,if it helps.
*& Report ZZZ_JAYTEST1                                                *
REPORT zzz_jaytest1 NO STANDARD PAGE HEADING MESSAGE-ID zhrt.
Variable Declaration
DATA : v_form_name TYPE rs38l_fnam,
       itab TYPE STANDARD TABLE OF pa0001,
       w_ctrlop TYPE ssfctrlop,
      w_compop TYPE ssfcompop,
      w_return TYPE ssfcrescl.
SELECT * FROM pa0001 INTO TABLE itab UP TO 5 ROWS.
SORT itab BY pernr.
DELETE ADJACENT DUPLICATES FROM itab COMPARING pernr.
DATA: control TYPE ssfctrlop,
control_parameters TYPE ssfctrlop,
output_options type SSFCOMPOP.
control-preview = 'X'.
control-no_open = 'X'.
control-no_close = 'X'.
control-no_dialog = 'X'.
control-device = 'PRINTER'.
output_options-tddest = 'LOCL'.
OUTPUT_OPTIONS-TDNOPRINT = 'X'.
OUTPUT_OPTIONS-BCS_LANGU = SY-LANGU.
CALL FUNCTION 'SSF_OPEN'
EXPORTING
   USER_SETTINGS            = ' '
   OUTPUT_OPTIONS           = output_options
   CONTROL_PARAMETERS       = control
EXCEPTIONS
   FORMATTING_ERROR         = 1
   INTERNAL_ERROR           = 2
   SEND_ERROR               = 3
   USER_CANCELED            = 4
   OTHERS                   = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
output_options-tddest = 'LOCL'.
OUTPUT_OPTIONS-TDNOPRINT = 'X'.
OUTPUT_OPTIONS-BCS_LANGU = SY-LANGU.
CALL FUNCTION '/1BCDWB/SF00000066'
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS         = control
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
   OUTPUT_OPTIONS             = output_options
   USER_SETTINGS              = ' '
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            = w_return
JOB_OUTPUT_OPTIONS         =
TABLES
    itab                       = itab
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'SSF_CLOSE'.

Regarding current system date as prompt

Hi all,
I am very new to this obiee.
I am trying to set the dashboard prompt value as the currnet date. But i am not able to get it. were to set to set variable and how to set it. Please any one can help me.
Thanks a lot for your help
A

hi,
Current_date is the default function available in obiee like Sys_Date in Sql language.
PS:Please award the points if you satisfied and close the thread
thanks,
saichand.v

Regarding Can we store User Selected values in prompts

Please help us in achieving the below requirement.
Requirement is to store User Selected values in prompts when the report is opened by a User for the first time and make use of those values to refresh the report next time onwards.
1.Can this be achieved in WebI ?
2.If it is thru SDK(we use Java), any experience/help in doing this ?
Environment : BO XI 3.1 with SAP BW Integration

Hi ,
If you dont want data to be displayed in this report for this two values , then exclude this two values when you restrcit your characteristic to the variable.
If you want not to display this values when user opens help for entering the values where he can see all the possible values for selection for the variable, then it wont be possible.
Hope this will help.
- Jaimin

Regarding user prompts in non distributed forms

Hi, newbie here.
Am creating forms for use by trained advisers.
Idea is to maintain style and content consistency. User prompts in text fields only seem to work when form is distributed, is that the case. i.e. the prompts will not operate if the person filling the form opens the PDF directly on their own PC?

Thanks for that Niall.
That will get around it.
I was going down the Object (tab) Value - Empty message route.
The idea was to have help text diplayed in the field which the user had to replace.
If I set the user required option will this only operate within a 'distributed' form?
i.e. highlight field in red if required fields have not been completed.
Thanks again

Help needed :- Regarding multi prompts usage in FF3.0* with java script

Hey i used the java script given in link :- http://sranka.wordpress.com/2008/11/09/how-to-replace-multi-go-button-prompt-by-one/#comment-96
to hide multi-go-button in prompts and it works for IE 7 and firefox 2.0* with 10.3.4.1.
Now since 10.1.3.4.1 is certified with firefox 3.0* ,when i use this same script in firefox 3.0* for my prompts it doesn’t work .
Any idea why ? Please help me with this,as i want to use this hide go button feature in firefox 3.0* too.
Are these scripts browser to browser incompatible ? If yes from where can i get the script for firefox 3.0* ?
Awaiting for the inputs.
Thanks,
Nisha

Quadruple-posting your issue won't get it resolved quicker. Please stop that. If you feel your thread needs to be on top, bump it by adding a "Any input?" post to it or something. Ome would assume that forums are around long enough for this trick to be known.

I am having an issue regarding a placed order via customer service department

I recently relocated to Anchorage Alaska as part of a permanent change of station per the United States Air Force. I was initially located on the East Coast in the lower 48 and at the time of activating my contract I had purchased two separate Iphone 4 devices. I also recently went in to a store in February to purchase a Nexus 7 as well.
Upon arrival in Anchorage I had multiple issues regarding the Iphone 4 devices including being unable to send and receive text messages & imessages, unable to make phone calls, dropped phone calls, unable to utilize GPS, as well as not being able to access general account information and use anything related to web browsing or data usage. It was determined that because the Iphone 4 operates on the 3g network and Verizon does not have a 3g network in Alaska, as a result I was utilizing an extended service network from another carrier. As a result of this I am only able to use my Iphone 4 devices while connected to my wi-fi network while within my home, which is totally unacceptable.
I was not made aware that I would be dealing with this when I moved to Alaska and inquired as the the use of the devices I currently owned prior to purchasing the tablet. I was assured by three separate store employees one of which being a manager that all devices would function at 100% efficiency including the Iphone 4s. In fact I was recently billed 350$ for roaming charges last month, which prompted me to speak with a representative via the online chat regarding the significant increase she said that she was unable to process any sort of credit to the account regardless of what I had been told at a local Verizon store where I purchased the tablet.
As a result of all of these mishaps since arriving here in Alaska I determined I was in need of newer devices that utilize the 4G LTE network currently provided by Verizon in Alaska. I know for a fact that the 4G LTE works great up here because my Nexus 7 tablet runs flawlessly and does not incur roaming charges when utilizing the 4G LTE network.
Yesterday I attempted to contact Verizon through the live chat feature regarding upgrading two of the devices on my account. The live chat representative immediately asked me when my upgrade date was. Upon telling her my upgrade date 9/29/2014 she told me I should contact the customer service department as I might be eligible for an early upgrade. I then proceeded to contact the customer service department using my Iphone 4.
My attempt to speak to anyone in the customer service department resulted in a merry-go-round of being put on hold 6 separate times by two different employees, both of which had me wait for more than an hour while they attempted to speak to a manager to gain approval for an early upgrade. The first rep seemed almost sure she would be able to have my devices upgraded early especially considering the issues I was having regarding service.
The second rep seemed newer and was very dodgy about my questions and was very unwilling to help at first. He even mentioned that I had been a Verizon customer for almost two years, had never missed a single payment and had outstanding account history which should have garnered some sort of importance to the level of my request. But I digress, during this time I was disconnected from the call twice from each separate representative.
Both reps assured me they would call me back, I never did get a call back from either one of those reps and I was becoming very frustrated having waited four hours trying to find some sort of solution to my current predicament.
After waiting an hour for the second representative to call back I grew impatient and contacted the customer service department, was put on hold again, and finally reached a third customer service representative who was able to provide a solution for me.
I explained everything I had been dealing with to Cory ID # V0PAC61, both regarding the phones, the issue of the level of service I was receiving, the dire need for working devices and the multiple times I had been disconnected. I explained to him as a result of these issues I was certainly considering switching to a different provider, a local provider even who could provide me the adequate service that I require for my mobile devices.
I explained to Cory that I had been with Verizon for almost two years, and I had been on a relatives account prior to owning my own Verizon account and had never received this kind of treatment when trying to work towards a simple solution. Cory proceeded to tell me he needed to put me on hold to see if there was anything that could be done regarding the upgrades of the device considering all of the trouble I had been dealing with.
After Cory reconnected with me in the phone call he was able to successfully reach a solution by allowing me to upgrade my devices. We conversed about the options available and I eventually decided to upgrade both Iphone 4 devices to Moto X devices as we determined those would be sufficient for my needs while in Alaska. I also proceeded to add two Otter Box Defender cases to the order so that the devices would have sufficient protection. Cory inquired as to whether or not I would like to purchase insurance for the phones as well and I opted for the $5.00 monthly insurance which including damage and water protection.
Cory explained to me the grand total for the devices which included an activation fee of $35.00 for each device, $49.99 for each Otter Box case, and an additional $50.00 for each device which would be refunded as a rebate upon receipt of the devices and activation, a rebate that I would be required to submit. Cory explained to me that the devices would most likely arrive Tuesday of 6/17 and no later than Wednesday 6/18.
Cory took my shipping information and told me everything was all set and the only thing left to do was to transfer me to the automated service so that I could accept the 2 year agreement for both devices. I thanked him very much, took his name and ID# so that I might leave positive feedback about his exemplary customer service and was then transferred to the automated service.
Once transferred to the automated service I was then prompted to enter both telephone numbers for the devices that would be upgraded, I was then required to accept the new 2 year agreement for both devices and after doing so I was required to end the call. I did so in an orderly fashion and expected a confirmation # to arrive in my email regarding the placed order.
I have never received a confirmation email. I decided to sleep on it and assumed a confirmation email would be sent sometime tomorrow. Nothing has since been received however. I woke up early this morning around 6AM Alaska time to speak to another live chat representative, Bryan, in the billing department who assured me the order was currently processing and verified the order #. I asked him whether or not it was typical for a customer to not receive a confirmation email for an order placed and he said it can sometimes take up to 2-3 business days. He then stated that he had taken note of the issues I was experiencing and told me he would transfer me to the sales department as they would be able to provide more information regarding the shipment of both devices and a confirmation email, as he stated he did not want me to have to wait any longer than necessary to receive said devices.
I was then transferred to Devon in the sales department via the live chat service where I was then required to repeat everything I had said to both Bryan and the other representatives I had spoken too. After a lengthy discussion and repeating everything I have just wrote he told me the order was indeed processing and that he would send a confirmation email in the next 30 minutes.
That was 2 hours ago. It is now 8am Alaska time and I still have not received a confirmation email regarding my order. I was sent an email by Verizon an hour ago stating I had a device to "discover". The email contained no information regarding the shipment of my device, the order confirmation number, or anything regarding my account. The email I received was a typical spam email asking an individual to check out the current available phones and sign up for a new contract.
All I want is a confirmation email to assure that the devices are being sent. I need my phone for work and to communicate with my family in the lower 48. I desperately need to make sure that the device is in fact being sent to the proper address, this is why a confirmation email of the order is so important. I do not care about the shipping speed I just want what I ask to be taken care of for a change. I would hate to sit here unable to determine what the status of my devices are only for the order to be stuck in "processing" limbo and be unable to receive the devices when I was told they would be sent.
I feel I have been given the run around treatment way more than is typically given with any company when an individual is trying to work towards a solution. I have been patient and cordial with everyone I have spoken with, I have not raised my voice or shown stress or anger towards the situation I have only tried my best to work towards a solution with anyone I have spoken too but I am becoming increasingly frustrated with this situation.
Any help regarding this matter would be greatly appreciated. This situation has left a sour taste in my mouth and if the devices were indeed not actually processed in an order, or they were not shipped correctly, or in fact if the order had never existed at all it will only deter me from keeping my Verizon account active and affect my decision to switch to another provider.

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Report should prompt me for parameters, please help.

Hi All,
I am using Crystal version 10, So is there any way I can get the behaviour of my parameters as dynamic parameter? I have this requirement because when I am deploying the Report on BO server, and try to open the report from InfoView, it is not prompting me for parameters, rather it is giving me the copy which we had scheduled earlier. To get the fresh data with different parameters, we again need to schedule the report.
What I want is simple, Whenever user clicks on the report link in infoview, I should be promted for the parameters my report is using.
Please help..
Thanks
-Azhar

Hi
It would prompt whenever it's refreshed.
You can refer to Business View manager guide from [here|http://help.sap.com/businessobject/product_guides/boexir2/en/xir2_bv_admin_en.pdf ] for detailed information.
Hope this helps!!
Regards
Sourashree

XML Publicher Report Output without Prompt Value

Hello,
I've one report(XML Publisher) which prints various data from PS_JOB,PS_PERSONAL_DATA and some other Performance tables.
The Prompt Values are from a dynamic view which shows the Subordinate employees(emplids and names) of the login employee.
The base query view i created has all the information of all active employees from all Business Unit. Now when i select when employee from prompt table the output values for that particular employee and is ok. But when i don't select anything(no table edit), it is not showing the output of my subordinates but for all the employee. That is Right because i've base report view is for all employees.
Is there any way that if i dont select anything from prompt values i'll get only output of my subordinates only?
Regards!

Thanks. I did try that before but the view didn't build but i don't how today the view built successfully.
But when i tried to run the query with a normal user who's having subordinate the excel output is still blank.
One more thing, when i checked Resolve Meta SQL in Application designer, the %oprclause doesn't resolve to PS.
below is my complete query..with subqeury for finding current user..
SELECT A.emplid,
       A.Name_Display,
       K.descr,
       T4.effdt join_date,
       D.grade,
       G.descr Dept,
       D.effdt Last_prom_dt,
       period_begin_dt,
       AA.EMPLID MGR_ID_VW,
       AA.NAME_DISPLAY NAME_DISPLAY_MGR,
       ab.supervisor_id EMPLID_FM_VW,
       FMGN.name_display NAME_DISPLAY_FM,
FROM PS_PERSONAL_DATA A,
       (SELECT EMPLID, NAME_DISPLAY FROM PS_PERSONAL_DATA) AA,
       (SELECT ad.emplid,
               DECODE(ad.supervisor_id, ' ', 'XXXX', ad.supervisor_id) supervisor_id
          FROM ps_job ad
         WHERE ad.effdt = (SELECT MAX(t3.effdt)
                             FROM ps_job t3
                            WHERE ad.emplid = t3.emplid)) AB,
       (SELECT EMPLID, NAME_DISPLAY FROM PS_PERSONAL_DATA) FMGN,
       (SELECT emplid, effdt
          FROM ps_job T3
         WHERE effdt =
               (SELECT MIN(effdt) FROM PS_JOB T5 WHERE T5.emplid = T3.emplid)) T4,
       PS_EP_APPR B,
       PS_EP_APPR_ITEM C,
       PS_JOB D,
       PS_DEPT_TBL G,
       PS_BUSUNIT_HR_VW K
WHERE A.EMPLID = B.EMPLID
   AND B.EP_APPRAISAL_ID = C.EP_APPRAISAL_ID
   AND A.EMPLID = D.EMPLID
   AND AA.EMPLID = D.SUPERVISOR_ID
   AND D.supervisor_id = AB.emplid
   AND FMGN.Emplid = AB.supervisor_id
   AND c.ep_appraisal_id = pnt.EP_APPRAISAL_ID
   AND T4.emplid = D.emplid
   AND D.deptid = G.Deptid
   AND D.business_unit = K.Business_unit
   AND D.effdt =
       (SELECT MAX(t1.effdt) FROM PS_JOB t1 WHERE t1.emplid = D.EMPLID)
   AND A.EMPLID IN
     (SELECT EMPLID                                                            ----------here comes subquery for finding logged in user
          FROM (SELECT B.EMPLID
                  FROM PS_NAMES A
                 INNER JOIN PS_JOB B ON B.EMPLID = A.EMPLID
                                    AND B.EMPLID = A.EMPLID
                                    AND B.EFFDT =
                                        (SELECT MAX(CA.EFFDT)
                                           FROM PS_JOB CA
                                          WHERE CA.EMPLID = B.EMPLID
                                            AND CA.EFFDT <= %CurrentDateIn)
                 WHERE A.NAME_TYPE = 'PRI'
                   AND A.EFFDT = (SELECT MAX(B.EFFDT)
                                    FROM PS_NAMES B
                                   WHERE B.EMPLID = A.EMPLID
                                     AND B.NAME_TYPE = A.NAME_TYPE
                                     AND B.EFFDT <= %CurrentDateIn)
                   AND B.SUPERVISOR_ID =
                       (SELECT T1.OPRID FROM PSOPRDEFN T1 WHERE %oprclause)
                    OR A.EMPLID =
                       (SELECT T2.OPRID FROM PSOPRDEFN T2 WHERE %oprclause)
                    OR B.SUPERVISOR_ID IN
                       (SELECT EMPLID
                          FROM PS_JOB
                         WHERE SUPERVISOR_ID =
                               (SELECT T3.OPRID
                                  FROM PSOPRDEFN T3
                                 WHERE %oprclause))))
ORDER BY A.emplid Regards!

Using a Variable Prompt - In an analysis using Top N filter (URGENT)

Hi Experts
I have created a variable prompt that is setup in the following way :
Prompt Name : Number_of_rows
User Input : Radio Buttons
Radio Button Values : *1/ 2* (Custom Values)
Variable Data Type : Number
Default Selection : *1* (Specific Custom Value)
I have an analysis/ report that has the following columns Customer ID | Number of Orders
I have applied a top N filter to this report using the varibale prompt :
*Number of Orders is in top @{Number_of_rows}* (which is equivelent to Number of Orders is in top 1 or 2)
However when I view the report im getting the following error
View Display Error
Error getting drill information: SELECT "Customer"."Customer ID" saw_0, "Sales Facts"."Number of Orders" saw_1 FROM "Sales" WHERE TOPN("Sales Facts"."Number of Orders",Number_of_rows) <= Number_of_rows
Error Details
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Location: saw.views.evc.activate, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool, saw.threadpool, saw.threads
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27005] Unresolved column: "Number_of_rows". (HY000)
SQL Issued: {call NQSGetLevelDrillability('SELECT "Customer"."Customer ID" saw_0, "Sales Facts"."Number of Orders" saw_1 FROM "Sales" WHERE TOPN("Sales Facts"."Number of Orders",Number_of_rows) <= Number_of_rows')}
Please can you help
Kind Regards
Hiten
Edited by: #:::HITEN:::# on 29-Nov-2012 04:24

I'll put this as below
My prompt will have the TopN which can be formated by TopN Orders and setting this as Presentation variable as N
SELECT TOPN("#Sales",10) FROM "SA" order by Product
In the report I'm using same column (Orders) with expression as below.
TOPN("#Sales", cast(@{N}{2} as int))
If this is not helpful for you then try to pass some default value for the Presentation variable

Regarding prompts

Similar Messages

Maybe you are looking for