Regarding RBE

Hi guys,
Does the RBE tool capture the Report painter programs and SAP query related programs.
Can somebody shed light on this.
regards
Ambichan

Hi Ambikumar,
I am not pretty sure, but I think they are not captured in the RBE. I haven't seen the tool actually, but just seen a glimpse of it during Teched, so as I remeber they were saying that this tool is still not cover all the objects.
it is better if you just right to SAP so that you can get a quick response.
Regards,
Atish

Similar Messages

How to configure RBE in order to get data from a SAP System

Dear all,
I downloaded the last version of RBE in order to install it and evaluate the concept of Reverse Business Engineering.
After installing it on my laptop, I try to access with no exit. It appears a log on screen.
Someone can help me by explaining how to set first steps in order to connect with a system?
Thanks in advance, Xavier

Hi Gopi,
Here I enclose the steps for sending data from a SAP R/3 system to Non-SAP R/3 thru ALE.
Here my Non SAP System is - Web Methods.
1.Creating LS - 1. SAP R/3 -              S1_800
                         2. web methods LS - WM_800
2. ASSIGN CLIENTS TO LS - S1_800 TO 800
3.     DEFINE TARGET RFC DESTINATIONS -
    3.1.   TCP/IP Connection -          RFC DEST NAME -WM_800
                                         Connection Type - T
                                          Applicataion Type - Registered server proggram
                                                PROGRAM ID - WMB2B1
                                         Gateway Host - Sap Server Name
4.0. Model View Name - W_M_V (for sending data to IS)
                                         sender - S1_800
                                        receiver - WM_800
                                        message type - MATMAS
      4.1. Create Partner Profiles.
5.     Create PORT - TCode - we21
          5.1. For Wem Methods system - WM_PORT
                  RFC Destination Name - WM_800 (created in step 3.1.)
With Regards
Vasu

RBE 3.0 with ECC 6.0

Since RBE 2.0 is no longer delivered with ECC6.0, Can RBE 3.0 be used to replace it with ECC6.0? Where can RBE 3.0 be found? Need help!!! Thanks a lot.

Hi Haifeng,
Find info about SAP Reverse Business Engineer at
https://websmp102.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000052162007E
Regards
Juan

Comparison between ARIS and RBE Plus

Hi,
Can anyone provide or can point me to some comparative study between the ARIS and RBE Plus with respect to their features and capability of business process re-engineering and integration with SAP Solution Manager.
Regards
Nilay

I absolutely agree that RBE Plus and ARIS are complimentary solutions.
Dont mix up RBE (or RBE 2.0, SAP RBE) and RBE Plus. RBE doesn't really support 4.7 systems and higher and has no integration with SAP Solution Manager. RBE Plus supports SAP R/3 3.1i and higher and several other SAP systems like BW, SEM and CRM. RBE Plus uses the SAP standard interface to populate the reference model (BPR) from SAP within the SAP Solution Manager. RBE Plus doesnt look only on the transaction usage for the evaluation of the Business Process Repository but even more important analyzes if and how the SAP tables are actually used. If a customer doesnt use the SAP standard transaction VA01 for creating his sales orders but uses ZA01 instead the analysis of the sales documents still will activate the sales order process.

RBE 3.0 Transaction file

Running RBE3.0 Test version I downloaded the 4 xml-files using ZRBE_MAIN, but there is the Transaction assignment file that seems to be misformatted
meaning that TRANSACTION TAG of the XML seems to be missing.
File is generated using Abap zrbe_dwl_trans_assignments provided by OSS note.
Anyone ran into this kind of issue ?
marco

Hi Rafael
Note 1001343 contains info on the reports for extracting RBE data
This link: https://websmp102.sap-ag.de/~sapidb/011000358700000052162007E/RBE30_V02.htm
has a few other notes that are applicable for RBE3 that may be useful
Regards,
Alex

RBE Problem

I have a Big problem with RBE ,
I use RBE to assign static IP to my adsl user :
interface Loopback0
ip address *.*.*.* *.*.*.*
interface ATM4/ima3.1 point-to-point
ip unnumbered Loopback0
atm route-bridged ip
pvc 0/1001
encapsulation aal5snap
when I use RBE , some times my ping time from BRAS to ADLS user which has Static IP increase terribly.
But when I set dynamic IP for that use with pppoe , there is no problem.
pvc 0/1001
encapsulation aal5snap
protocol pppoe
are there any commands that must be used with RBE config ?
or
is it possible that noise is reason of problem , if it's true why in Dynamic situition .
Distance from my DSLAM to MY user is 2-3 Km .
regards
reza

version 12.4
service timestamps debug uptime
service timestamps log datetime localtime
service password-encryption
hostname
boot-start-marker
boot system flash c7200-js-mz.124-3.bin
boot-end-marker
enable secret xxxx
aaa new-model
aaa authentication login telnet group tacacs+ local
aaa authentication ppp DSL-Users group radius none
aaa authorization exec telnet group tacacs+ local
aaa accounting network DSL-Users start-stop group radius
aaa session-id common
resource policy
ip subnet-zero
ip rcmd rsh-enable
ip rcmd remote-host SYSTEM *.*.*.* SYSTEM enable
ip cef
no ip domain lookup
vpdn enable
async-bootp dns-server ip1 ip2
bridge irb
bba-group pppoe global
virtual-template 1
interface Loopback0
ip address *.*.*.* *.*.*.*
interface FastEthernet0/0
ip address *.*.*.* *.*.*.*
duplex full
speed 100
pppoe enable
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface ATM1/2
no ip address
carrier-delay 60
scrambling cell-payload
framing crc4adm
ima-group 2
interface ATM1/ima2
ip address
carrier-delay 60
no atm ilmi-keepalive
pvc 0/1001 <<< DHCP-assigned IP users>>>
encapsulation aal5snap
protocol pppoe
pvc 1/32
protocol ip *.*.*.* broadcast
protocol ip *.*.*.* broadcast
<<< Static ip user >>>
interface ATM1/ima2.1 point-to-point
ip unnumbered Loopback0
atm route-bridged ip
pvc 0/1001
encapsulation aal5snap
interface Virtual-Template1
ip unnumbered FastEthernet0/0
no logging event link-status
peer default ip address pool t1
ppp max-bad-auth 3
ppp authentication pap chap DSL-Users
ppp accounting DSL-Users
H!
ip local pool t1 *.*.*.* *.*.*.*
<< Routed IP for specified user to subinterface >>
ip route *.*.135.186 255.255.255.255 ATM1/ima2.1
IOS : c7200-js-mz.124-3.bin - 7204 vxr -256 mb sdram
R527x CPU at 262MHz, Implementation 40, Rev 10.0, 2048KB L2 Cache
4 slot VXR midplane, Version 2.7
user has a unstable ping time :
Reply from *.*.135.186: bytes=32 time=71ms TTL=125
Reply from *.*.135.186: bytes=32 time=202ms TTL=125
Reply from *.*.135.186: bytes=32 time=182ms TTL=125
Reply from *.*.135.186: bytes=32 time=25ms TTL=125
Reply from *.*.135.186: bytes=32 time=190ms TTL=125
Reply from *.*.135.186: bytes=32 time=51ms TTL=125
Reply from *.*.135.186: bytes=32 time=108ms TTL=125
Reply from *.*.135.186: bytes=32 time=148ms TTL=125
Reply from *.*.135.186: bytes=32 time=186ms TTL=125
Reply from *.*.135.186: bytes=32 time=62ms TTL=125
Reply from *.*.135.186: bytes=32 time=115ms TTL=125
Reply from *.*.135.186: bytes=32 time=206ms TTL=125
Reply from *.*.135.186: bytes=32 time=89ms TTL=125
Reply from *.*.135.186: bytes=32 time=58ms TTL=125
Reply from *.*.135.186: bytes=32 time=60ms TTL=125
Reply from *.*.135.186: bytes=32 time=173ms TTL=125
Reply from *.*.135.186: bytes=32 time=167ms TTL=125
Reply from *.*.135.186: bytes=32 time=68ms TTL=125
Reply from *.*.135.186: bytes=32 time=76ms TTL=125
Reply from *.*.135.186: bytes=32 time=240ms TTL=125
in normal situion his ping time must be between 30 and 40 ms
some times his ping time increase above 1200 ms and finally request timeout.
-this user has a 1024 kb (downstream) and 256 kb (upstream)
-in attachment file there is specifications of user in dslam(siemense hix5300 )
I have a user in this interface that has a static ip with less up and down stream but i have no problem with him.
- if you need more information plz tell me
thanks for your attention.
regards,
reza

RBE and analysis

Guru's Worldwide:
Here is the question
RBE3.0 is shelved - however
a) does it run on ECC if so what is it that does not get analysed?
b) I hear the ehp1 has the business process analysis can be done ..how close can it be used to RBE
c) What are differences between RBE3.0 and RBE +
Wish i could double the points - seeking out answers for sometime !
Thanks !
Raj

Hello Raj,
a few general comments before I'll answer your questions.
RBE was co-deveoped by SAP and IBIS end of the 90tys. In 2004 SAP and IBIS agreed that IBIS should have the right to promote their RBE Plus version to help SAP customers.
IBIS is a SAP partner and continuously involved in several SAP developments like SAP Solution Manager and RBE.
a) Since 2004 SAP has developed various versions to replace the old RBE tool. The current version runs on ECC but basically only analyzes transactions usage. There are several companies out their who do bascially the same thing.
There is no analysis of customizing and document data. See more under c)
b) Generally speaking the same restriction as for RBE 3.0 apply. Not really new content avaiable.
c) RBE 3.0 is provided by SAP, RBE Plus is provided by IBIS.
RBE 3.0/SoDocA or however SAP names the tool right now focuses on transactional usage. What transactions are being used.
RBE Plus analyzes transaction usage, use of customizing, master data, organizational units, technical information (tables, fields, customer exits, BAPI's, Idoc's, programms...) and document data. The evaluation of your as is usage is very precise. Even if you have lot's of custom transactions and reports you will get a good blueprint of your processe since IBIS supports assigning those transactions to your processes.
Lots of additonal content available for industry solutions, upgrade analysis, user and role analysis.
It is like comparing a bicycle with a Mercedes.
IBIS is offering the same basic solution for SAP SolMan since 2005, SAP had several offerings in that time frame.
The good news is, you can use the RBE Plus results within SAP's Solution Documentation Assistant. Do the RBE Plus Analysis first and then you have a good blueprint which can re-evaluated within SAP Solution Manager. RBE 3.0/SoDocA can be used complementary.
Regards,
Heiko

About solution manager and RBE

hi,
I am supposed to integrate RBE (Reverse Business engineering) with SAP ECC 5.0. and i don't know abt RBE as well as solution manager so please give me step by step guidline that what procedure i have to follow for this.
and aslo tell me is it neccasary to integrate SM befor integrating RBE. and if yes then also give me step by step guidline for integrating SM.
thanks in advances,
regards,
Hardik.

Hi Hardik,
there are some companies that offer a services to analyze
an R/3 or ECC system with the RBE tool and bring the result in Solution Manager as a project. If the RBE analysis is based on Solution Manager BPR content (ST-ICO), the project will have all content (documents, IMG activities) that have been maintained by SAP in BPR.
Since RBE is currently not delivered any more (see note 910687) such services may be the only way to do this.
I know the following services for Solution Manager and RBE:
<a href="http://www.solutionmanager.ch/">http://www.solutionmanager.ch/</a> and
<a href="http://www.ibis-thome.com/">http://www.ibis-thome.com/</a>
Best regards,
Michael

RBE - Reverse Business Engineering for UniCode - In SolMan

Hello.
Has RBE been incorporated into Solution Manager for ECC6.0 and UniCode
Systems ?
If so, any documention that you can point us to for reference on how to
setup and use ?
RBE can only be used for ECC6.0 and Non Unicode Systems ?
Latest version of RBE is 2.0 for Non Unicode Systems ?
Please advise on how we can get RBE functionality and reporting for
ECC6.0 UniCode System.
Does RBE 3.0 work with Unicode for ECC6.0 or do we have to go with
Solution Manager ? an older release of Solution Manager for RBE ?
Thanks

Hello Markus,
I want to install Reverse Business Engineering (RBE) tool can you help which is the latest version of RBE tool available on SAP support portal for download.
As you mentioned that " RBE is discontinued, both 2.0 and 3.0 (3.0 was only a test version)." So you mean to say that RBE 2.0 and 3.0 are not availabe for download and is there any higher version availabe for download ?? or where can i get this component for installation ??
Also if RBE tool is discontinued is there any replacement for this RBE tool ?
Thanks in advance
Regards,
Vinod Kumar

RBE tool change in Date

Hi all,
In the RBE standard code , i want to change the selection criteria for Monitoring.
I have got it we can do it with ST03 can somebody send how it has to be changed ??
Thanks in Advance ...

Hi Vivek,
it depends on the SAP version you are on. If the topic is still of interest I can send you a documentation how to change the ST03 settings.
Best Regards,
Heiko

RBE/RBPD/SolMan Documentation

Hi,
Inquisitive about RBE, I happened to check threads to understand RBE and eventually ended with RBPD and SolMan Documentation.
RBE now known as RBPD/SolMan Documentation etc...So a bit confused.
I wish to know why RBE is used, when it is used, would appreciate if I get few examples to understand better.
Cheers,
Aditya V

Dear Aditya V The official successor of SAP RBE or RBE+ from IBIS is Reverse Business Process Documentation short RBPD as part of SAP Solution Manager "Solution Documentation Assistant" short SDA. It will help to create an automated solution documentation and usage analysis of any SAP product. Details can be found under http://service.sap.com/RBPD Kind regards, Barbara

Regarding sy-index and sy-tabix

Hi,
What is the major difference between sy-index and sy-tabix ,
can you give me one good example with code..
Regards,
Reddy.

Hi,
SY-TABIX - Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY_INDEX - In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
sy-tabix is the tab index - the index of the record in the internal table you are accessing,
sy-index is the loop counter.
If you use a condition in LOOP the sy-index will go from 1 to n, but sy-tabix will refer to the line in the internal table.
Hope this helps u.
Thanks,
Ruthra

Regarding Field Missing in Dso Transformation

Hi
Folks
I am facing the issue like
In Datasouce to DSO transformation i can see the 55 objects in DSO table, and in DSO to Cube Transformation i can see 54 fields in DSO table, one field is missing , the object 0TXTSH(short discription) is mapped to field 0TXZ01in DS to DSO transformation.
so How can i get the field in DSO to Cube transformation.??
any settings have to be change???
waiting for yours Valuable answers
Regards
Anand

Hi,
Please identify the object and check it whether it is an attribute or a characteristic, if it is attribute only disable that option then check it.
Regards,
Srinivas

I am having an issue regarding a placed order via customer service department

I recently relocated to Anchorage Alaska as part of a permanent change of station per the United States Air Force. I was initially located on the East Coast in the lower 48 and at the time of activating my contract I had purchased two separate Iphone 4 devices. I also recently went in to a store in February to purchase a Nexus 7 as well.
Upon arrival in Anchorage I had multiple issues regarding the Iphone 4 devices including being unable to send and receive text messages & imessages, unable to make phone calls, dropped phone calls, unable to utilize GPS, as well as not being able to access general account information and use anything related to web browsing or data usage. It was determined that because the Iphone 4 operates on the 3g network and Verizon does not have a 3g network in Alaska, as a result I was utilizing an extended service network from another carrier. As a result of this I am only able to use my Iphone 4 devices while connected to my wi-fi network while within my home, which is totally unacceptable.
I was not made aware that I would be dealing with this when I moved to Alaska and inquired as the the use of the devices I currently owned prior to purchasing the tablet. I was assured by three separate store employees one of which being a manager that all devices would function at 100% efficiency including the Iphone 4s. In fact I was recently billed 350$ for roaming charges last month, which prompted me to speak with a representative via the online chat regarding the significant increase she said that she was unable to process any sort of credit to the account regardless of what I had been told at a local Verizon store where I purchased the tablet.
As a result of all of these mishaps since arriving here in Alaska I determined I was in need of newer devices that utilize the 4G LTE network currently provided by Verizon in Alaska. I know for a fact that the 4G LTE works great up here because my Nexus 7 tablet runs flawlessly and does not incur roaming charges when utilizing the 4G LTE network.
Yesterday I attempted to contact Verizon through the live chat feature regarding upgrading two of the devices on my account. The live chat representative immediately asked me when my upgrade date was. Upon telling her my upgrade date 9/29/2014 she told me I should contact the customer service department as I might be eligible for an early upgrade. I then proceeded to contact the customer service department using my Iphone 4.
My attempt to speak to anyone in the customer service department resulted in a merry-go-round of being put on hold 6 separate times by two different employees, both of which had me wait for more than an hour while they attempted to speak to a manager to gain approval for an early upgrade. The first rep seemed almost sure she would be able to have my devices upgraded early especially considering the issues I was having regarding service.
The second rep seemed newer and was very dodgy about my questions and was very unwilling to help at first. He even mentioned that I had been a Verizon customer for almost two years, had never missed a single payment and had outstanding account history which should have garnered some sort of importance to the level of my request. But I digress, during this time I was disconnected from the call twice from each separate representative.
Both reps assured me they would call me back, I never did get a call back from either one of those reps and I was becoming very frustrated having waited four hours trying to find some sort of solution to my current predicament.
After waiting an hour for the second representative to call back I grew impatient and contacted the customer service department, was put on hold again, and finally reached a third customer service representative who was able to provide a solution for me.
I explained everything I had been dealing with to Cory ID # V0PAC61, both regarding the phones, the issue of the level of service I was receiving, the dire need for working devices and the multiple times I had been disconnected. I explained to him as a result of these issues I was certainly considering switching to a different provider, a local provider even who could provide me the adequate service that I require for my mobile devices.
I explained to Cory that I had been with Verizon for almost two years, and I had been on a relatives account prior to owning my own Verizon account and had never received this kind of treatment when trying to work towards a simple solution. Cory proceeded to tell me he needed to put me on hold to see if there was anything that could be done regarding the upgrades of the device considering all of the trouble I had been dealing with.
After Cory reconnected with me in the phone call he was able to successfully reach a solution by allowing me to upgrade my devices. We conversed about the options available and I eventually decided to upgrade both Iphone 4 devices to Moto X devices as we determined those would be sufficient for my needs while in Alaska. I also proceeded to add two Otter Box Defender cases to the order so that the devices would have sufficient protection. Cory inquired as to whether or not I would like to purchase insurance for the phones as well and I opted for the $5.00 monthly insurance which including damage and water protection.
Cory explained to me the grand total for the devices which included an activation fee of $35.00 for each device, $49.99 for each Otter Box case, and an additional $50.00 for each device which would be refunded as a rebate upon receipt of the devices and activation, a rebate that I would be required to submit. Cory explained to me that the devices would most likely arrive Tuesday of 6/17 and no later than Wednesday 6/18.
Cory took my shipping information and told me everything was all set and the only thing left to do was to transfer me to the automated service so that I could accept the 2 year agreement for both devices. I thanked him very much, took his name and ID# so that I might leave positive feedback about his exemplary customer service and was then transferred to the automated service.
Once transferred to the automated service I was then prompted to enter both telephone numbers for the devices that would be upgraded, I was then required to accept the new 2 year agreement for both devices and after doing so I was required to end the call. I did so in an orderly fashion and expected a confirmation # to arrive in my email regarding the placed order.
I have never received a confirmation email. I decided to sleep on it and assumed a confirmation email would be sent sometime tomorrow. Nothing has since been received however. I woke up early this morning around 6AM Alaska time to speak to another live chat representative, Bryan, in the billing department who assured me the order was currently processing and verified the order #. I asked him whether or not it was typical for a customer to not receive a confirmation email for an order placed and he said it can sometimes take up to 2-3 business days. He then stated that he had taken note of the issues I was experiencing and told me he would transfer me to the sales department as they would be able to provide more information regarding the shipment of both devices and a confirmation email, as he stated he did not want me to have to wait any longer than necessary to receive said devices.
I was then transferred to Devon in the sales department via the live chat service where I was then required to repeat everything I had said to both Bryan and the other representatives I had spoken too. After a lengthy discussion and repeating everything I have just wrote he told me the order was indeed processing and that he would send a confirmation email in the next 30 minutes.
That was 2 hours ago. It is now 8am Alaska time and I still have not received a confirmation email regarding my order. I was sent an email by Verizon an hour ago stating I had a device to "discover". The email contained no information regarding the shipment of my device, the order confirmation number, or anything regarding my account. The email I received was a typical spam email asking an individual to check out the current available phones and sign up for a new contract.
All I want is a confirmation email to assure that the devices are being sent. I need my phone for work and to communicate with my family in the lower 48. I desperately need to make sure that the device is in fact being sent to the proper address, this is why a confirmation email of the order is so important. I do not care about the shipping speed I just want what I ask to be taken care of for a change. I would hate to sit here unable to determine what the status of my devices are only for the order to be stuck in "processing" limbo and be unable to receive the devices when I was told they would be sent.
I feel I have been given the run around treatment way more than is typically given with any company when an individual is trying to work towards a solution. I have been patient and cordial with everyone I have spoken with, I have not raised my voice or shown stress or anger towards the situation I have only tried my best to work towards a solution with anyone I have spoken too but I am becoming increasingly frustrated with this situation.
Any help regarding this matter would be greatly appreciated. This situation has left a sour taste in my mouth and if the devices were indeed not actually processed in an order, or they were not shipped correctly, or in fact if the order had never existed at all it will only deter me from keeping my Verizon account active and affect my decision to switch to another provider.

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Vendor Line item with Opening and Closing Balances report regarding

Dear All,
I need a report for vendor line items with Opening and Closing balances.
Thanks in advance
Sateesh

Hi
Try S_ALR_87012082 - Vendor Balances in Local Currency
Regards
Sanil Bhandari

Regarding RBE

Similar Messages

Maybe you are looking for