Regarding receiver File Adapter

Hi,
I am doing IDoc to File scenario.
After receiving IDoc, I need to send the information as flat file with fixed length columns to Legacy System and to Archive Folder in Local system (XI).
For this, I am using Java Mapping.
If any field (suppose length = 5) does not have any value in IDoc, I need to fill the respective field with (5) spaces. I am appending spaces if field does not exist or field length is less than the required length.
My problem is spaces are not coming in the Output File. They are getting trimmed.
File that is going for Legacy System is showing correct output.
But the problem is with the file that is going for Archive folder.
Can anyone please suggest me any ideas?
Thanks,
Yogi.

Hi Yogendranath,
<i>File that is going for Legacy System is showing correct output.
But the problem is with the file that is going for Archive folder.</i> - See since your Legacy system is having the correct output, so your JAVA mapping is working fine.
Now your problem is the file going to Archive folder is not having correct spaces - I think this problem is because of the viewer you are using to see the file...just try opening the file with notepad or wordpad and then count the spaces.....just check the filesize of legacy system and archive folder...are they same or not....if they are same, then you dont have any problem......but if they are different, then tell what extra processing you are doing to move the file from Legacy to Archive folder.
Thanks,
Rajeev Gupta

Similar Messages

Regarding receiver FILE adapter, REMOTE FTP server

Hi All,
The scenario was to get XML file from a local FTP server and to place that XML file in REMOTE FTP server, which we dont have any control over that REMOTE FTP,
While executing the scenario it is successfully picked the file and processed and it was success in SXMB_MONI, but when we see the Communication Chaneel of the receiver adapter it is generating the following error..
Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Connection timed out: connect
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Connection timed out: connect
clarifications needed ASAP
regards,
Kishore.

Hi,
Verify the Host details of the Remote FTP.
Try to ping the Remote host as below
Goto > start>Run --->type cmd and give the command as below
c:\>ping <host details or IP address> press enter and see if you get the successful communication response.
If its not it indicates that the connection is not setup.
Ask you FTP administrators to look into connectivity issue for it.
Thanks
Swarup

Email attachment name in sender mail adapter to the receiver file adapter

HI ,
Ths is regarding email to file scenario. I am trying to create file (in rceiver file adapter) with the same name as the email attachment that i read from mail sender adapter. I want ro use adapter module for this. I could find from blogs that there is module - GetAttachmentName - available that i can use for this in sender mail adapter.
Can you please let me know what whetehr i neeed to mention any module key and parameters for this.
I assume , i need to do following steps :Please confirm.
1. i can use this module - after payload swap module and before standard mail adapter module in sender mail adapter
2. select ASMA option in advanced tab in sender mail adapter
3. In receiver file adapter select ASMA option in advanced tab in sender mail adapter
4. Also select file name option in ASMA in sender mail adapter
Thanks,
Vamsi

Hi Vamsi,
your scenario is also described here: Re: sender mail adapter - attachment name
If you use the Module getAttachmentName, which is described here,
http://wiki.sdn.sap.com/wiki/display/XI/AdapterModulePI7.0GetAttachmentName
your scenario should work as you described it.
You just need to make sure that the Attachment Name that you read in the first place, is mapped to the Filename Attribute of the
Fileadapter (http://sap.com/xi/XI/System/File/FileName).
regards,
Daniel

Problem with fixedlenthgs in receiver file adapter

HI,
I am doing XML to flat file scenario and using mutli mapping concept without BPM.
in the receiver file adapter I am using FCC with fixedlengths,then it generated just 3 output files out of nearly 100 source files.the errored one are succcessful in the SXMB_MONI and failing in RWB-->Message moni with waiting status and MDT says that XI_J2EE_ADAPTER_FILE ,Error Code PROCESSING_ERROR .
i tried in SDN and then found something like enable the disablesecurity check box in variable substitution parameters ,then I got 4 files out.
these are my FCC params for all structures:
struc1.fieldFixedLengths
struc1.fixedLengthTooShortHandling
struc1.endSeparator
and I tried with fieldSeparator then it gives successfully all output files.
so,where is the problem?I didnt understand?
any suggestion.
thank you,
regards,
Babu Sri

Bhavesh,
I felt the same way,but assumed that ,in that way fixedlenghths wont work.
in my target structure most of the fields have 0-1 occurences ,and even in the source structure too.so,I think it might be the reason.Then I have to make all my about 60fields 1-1 madatory and using mapWithDefaultValue function, as my sources are optional.
you think it will work just using the "mapWithDefaultValue" function without changing my occurences to 1-1 in the target structure(mandatory)?infact I can try but ,cos of pain for changing like 60 fields....:) and even dont know which fields are causing the problem,so that we can apply "mapWithDefaultValue" function only on those fields.
thank you,
Babu Sri

Error dynamic File Name in Receiver File Adapter

Hi all,
Dynamic file name for Receiver file Adapter Problem
my multi mapping look like this in design mode
messages
     message1
          SD01_E
               FileName
               row
     message2
          SD02_E
               FileName
               row
by processing the xml look like this:
<ns2:SD01_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
or
<ns2:SD02_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
in file receivere adapter i have try this but it dos not work
payload:SD01_E,1,FileName,1
Error:com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0(:main:, row:1, col:0)
is there any way to have access to Filename in different root elements??
regards
Ralf

Hi Ralf,
i think, you need for each XML msg (each different root element) a new adapter -> a new IF determination, new rec agreement and a new channel.
Regards,
Udo

Dynamic File name in Receiver File adapter

Hi,
My Scenario is Proxy to File.
I must create filename dynamically in the receiver file adapter by taking the sales order number and divison from the source.
How can i create a dynamic filename? i searched the forum, but i could not get the correct answer,
Please help me out.
Regards
Srinivas

Hi Srinivas,
> My Scenario is Proxy to File.
> I must create filename dynamically in the receiver file adapter by taking the sales order number and divison from the source.
public String targetFileName(String Sono, String Div, Container container) throws StreamTransformationException
DynamicConfiguration conf = (DynamicConfiguration)container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String MyFileName = sono + div + "<filename>"+".xml";
conf.put(key, MyFileName);
return MyFileName;
File name you can format according to your requirement.
And one more thing for this you have to specify the ASMA properties. For this check the below link step-1 and step-2.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards
Ramesh

0 byte txt file using receiver File Adapter

HI,
My scenario is Flat File to Fixed Length File.
Mapping : Based on the condition Reciever node need to generated , In some cases it wont generate any node ( No data )
Receiver Communication channel : I used FCC for Fixed length Format.
Problem : When i am generatingf the receiver file with some data it executes. But when i am generating the file with no data , it fails in the receiver comminication channel.
Could not process due to error: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:Message1' found in document', probably configuration error in file adapter (XML parser error)'
I need the receiver file to generate with 0 bytes when there is empty data.
can any one help on this.
Thanks

Hi,
>>Problem : When i am generatingf the receiver file with some data it executes. But when i am generating the file with no data , it fails in the receiver comminication channel.
What happens in this case is, when you send a blank file to PI it processes but once it went to Receiver Adapter, it looks out for some fields because of the FCC settings. So it throws an error/exception because some fields are expected and it is not coming. Because of that you getting below exception.
Secondly, Once you send data with few values or fields it will process in Receiver file adapter FCC and if there is some error it throws error. this is why you getting exception in moni, and other places.
Regards
Aashish Sinha

Receiver File Adapter - Adapter Engine

I am able to read files using Sender File Adapter. But when I try to write a file using Receiver File Adapter I get the following erro:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="<http://sap.com/xi/XI/Message/30>" xmlns:SOAP="
<http://schemas.xmlsoap.org/soap/envelope/>" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.exi.usxid</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: No service user name found for Integration
Server is.00.usxid</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password)
for the Adapter Engine af.exi.uswalexi</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I tried executing the function module SAI_AE_DETAILS_GET but I am not getting the error URL Not found. This was working in the past. We upgraded to SP15 this showed up again.
Any help appreciated.

I'm working on integration of SAP with 3rd party application. While sending data from SAP to XI, i'm getting the following error which i've found in sxmb_moni (XML Message->Call Adapter).
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- -
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xp1.sapxi</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: No service user name found for Integration Server is.00.sapxi</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xp1.sapxi</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Plz help me to solve this issue. If possible mail me the solution to my personal email-id [email protected]
Note:
1. We are using CIM 1.3
2. In XI Server Message Monitoring, i'm getting the System Error message in Integration Engine.
3. In Payloads, i'm getting the required information in XML format as desired.
Thanks in advance.
Regards,
Navaneeth.S

Receiver File Adapter Not Executing OS Command

Hello All!
We are currently running PI 7.1 and wish to use a Receiver File Adapter to FTP a file to a mainframe and override the FTP system defaults.
Tried using the 'quote site recfm=fb lrecl=80' OS command but discovered that this would not work as the Adapter Engine is NOT on the mainframe.
Regrouped a bit and made a second attempt which involved writing a Unix script to ftp a file and override rthe system defaults. The idea was to use the File Adapter to FTP the data to the server, invoke the script and get the file to the mainframe with the proper attributes. The script when executed on the server works perfectly.
However, when the IDoc comes thru PI, the File Adapter ftp's the file ok but the script is never executed.
Any ideas why this is so or any suggestions?
Thank you.

Hi Ken,
Script only executes at Network File sharing (NFS) only. It dont work at FTP level.
So you can better write the file on NFS and then within the script to connect to ftp and do your processing.
Regards,
---Satish

Receiver file adapter command line

hi,
i am just wondering how to use command line on receiver file adapter.
i am not clear how to use this.
please modify on the following command!
anyway, i have to call java application after put some files by receiver file adapter.
cmd.exe %Fjava ./javacalltest
it did not work..
please guide me.
Command Line
An operating system command specified here is executed before or after a file has been successfully processed. The default value is an empty character string (no command).
When the operating system command is called, the file name currently being processed can be specified with the following placeholders:
%f (file name)
%F (absolute file name including path)

Hi Ogawa and Laurence,
Have look at :: /people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
1)Windows batch Commands::
http://labmice.techtarget.com/articles/batchcmds.htm
2)Linux:
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
Note:: First try using the comands on O.S if they work then only use them in Adapters.
Hope it will help.
regards
Piyush
Pl:reward some points if it is usefull.

Receiver file adapter not responding

Hi guys,
I have 2 interfaces in XI development system that make use of receiver file adapter in order to receive some .txt files. Although these communication channels used to work until yesterday, for some strange reason they stopped functioning, but only in development system. However, I cannot see any error in Runtime Workbench (Communication channel monitoring), it's status is "correctly configured and started" and has a green sign. But, when I sent a file from sender adapter, it is sent correctly, but it never gets received from receiver communication channel.
There is no error in SXMB_MONI either.
In XI production system, the same interfaces are functioning well.
Any ideas?
Best Regards
--Evaggelos

Hi Amit,
I went into Message Monitoring for this interface and I can see all the messages for the last 24 hours that should be written into a file that have status "to be delivered".
When I go into Details -->Audit Log for a single message:
2007-06-13 11:49:33 Success Processing child message of multi-message with message ID ff896d50-198a-11dc-cdfa-00145e694b16
2007-06-13 11:49:33 Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2007-06-13 11:49:33 Success Message successfully put into the queue.
And in Message Data there is the following information:
Status To Be Delivered
Repeatable Yes
Cancelable Yes
Error Category
Error Code
Start 13.06.2007 11:49:33
End
Sender Party
Sender Service TPBS_GR
Receiver Party
Receiver Service TPBS_GR
Interface http://famar.gr:LoyaltyDataMNSToSRS
MI_LoyaltyDataMNSToGR_IB
Quality of Service Exactly Once
Message b2685674-7626-5141-bfa1-13155ad0d25a
Reference
Conversation ID
Serialization Context
Direction INBOUND
Message Type Recv
Profile XI
Connection File_http://sap.com/xi/XI/System
Transport HTTP
End Point http://fmgralxi01:50000/MessagingSystem/receive/AFW/XI
Authorization
Sequential Number 0
Number of Retries 3
Failed 0
Retries 300000
Valid to
Persist Until 13.07.2007 11:49:33
Schedule Time 13.06.2007 11:49:33

Receiver File Adapter - FTPEx: 550 Access denied

Hi Experts,
In my receiver file adapter scenario I'm getting 550 Access denied in RWB.
I am a little confused here because I could access the FTP client from my desktop using the same User and Password informed in the Receiver CC. I also could drag and drop a file there.
Here you have Detail Display in RWB, it seems that at least the user is working fine for PI also:
Success: Connecting to FTP server "<FTP IP>"
Success: Write to FTP server "192.168.10.85", directory "\Transportadoras\10326750000101\", file "Nfe_teste.xml"
Success: Transfer: "TXT" mode, size 8881 bytes, character encoding UTF-8
Error: Attempt to process file failed with An error occurred while connecting to the FTP server '192.168.10.85:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Access denied.'. For details, contact your FTP server vendor.
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: An error occurred while connecting to the FTP server '192.168.10.85:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Access denied.'. For details, contact your FTP server vendor.
Regards,
Daniela
Edited by: Daniela Machado on Aug 11, 2010 10:18 PM

Hi Daneial,
This is an issue due to any firewall or proxy between your Xi system and the FTP.In this case the direct logon
works with same user but when XI tries to create file at runtime you get this error due to network issues.
To resolve this contact your Basis/Network guys and
1. Set the permissions to FTP User you are using as 777 rights(full access to read , write and delete)
2.If you have access to PI server, try to telnet /connect to ftp using command prompt (open ftp .....) the FTP server form there, you should see the same error there , inform this to your network guys.
3.Clear all the files places already in the ftp (take backup) and test afresh after permissions are set by basis team.
Regards,
$rinivas

Receiver File adapter content conversion using StrictXml2PlainBean

Hi All,
For receiver file adapter i am using the module StrictXml2PlainBean, and also i mentioned the module configuration like this
parameter name                              parameter value
recordTypes                                  Header,TransactionHeader,TransactionDetail,TransactionTrailer,FileTrailer
FileTrailer.endSeparator                |\n
FileTrailer.fieldSeparator               |
Header.endSeparator                   |\n
Header.fieldSeparator                  |
TransactionDetail.endSeparator   |\n
TransactionDetail.fieldSeparator |
TransactionHeader.endSeparator |\n
TransactionHeader.fieldSeparator |
TransactionTrailer.endSeparator |\n
TransactionTrailer.fieldSeparator |
But when i send the idoc, The receiver CC is throwing an error
Message processing failed. Cause: com.sap.aii.af.modules.conversion.xml2plain.ConversionException: Invalid structure name encountered during conversion: Transaction at XML element MT_DeliveryOrder,Transaction
My actual structure is
MT_DelvOrder
   Header 0...1
   Transaction 0....Unbounded
      TransactionHeader 1..1
       TransactionDetail     0...unbounded
        TransactionTrailer 1...1
   FileTrailer 0...1
The module is checking for the Transaction node,but i require the rest 3.
Same configuration i have done successfully with FCC without using the module....
So can any one suggest me where i am missing... why the module is pointint towards, the Transaction cant i ignore this node . and continue with the rest???
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 12:35 AM

Hi Rajesh,
The same FCC configuration was working fine with FCC and when i am using this module configuration i am getting the prob...
In the file i need the Header,TransactionHeader,TransactionDetail,TransactionTail,Filetrailer
my sample output file is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DeliveryOrder>
<Header>
</Header>0...1
<Transaction>0...Unbounded
    <TransactionHeader> 1..1
     </TransactionHeader>
     <TransactionDetail> 0...Unbounded
     </TransactionDetail>
      <TransactionTrailer>1...1
       </TransactionTrailer>
</Transaction>
<FileTrailer> 0...1
</FileTrailer>
Any suggestions will be great help...
I think i need to go with other options without using this module....
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 6:03 AM

RECEIVER FILE ADAPTER FCC ERROR

Hi team
My scenario is a text file has to be picked up by PI, has to processe it and the receiver is Proxy and it has to get updated and sent back to FTP location.
i am using Sender File Adapter with FCC and Also receiver File Adapter with FCC.
Both the sender and receiver structures are same; i am using the same FCC parameters for both the sides.
in Receiver File Adapter i am getting the following errors
1) Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
2)Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
please help me out
thank you
Edited by: vemugantivn on Aug 16, 2010 12:19 PM

Hi,
> 1) Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
> Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
> 2)Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
> Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
It is saying that you are not using the fieldSeparator parqameter.
have you provided the field separator parameter? if not then give like below
order_row.fieldSeparator : , (give what ever the separater you are using)
or
order_row.fieldSeparator : 10,5,... (if you are using fixed length)
Regards
Ramesh

Receiver File Adapter error

Hi all,
I am trying to convert the XML to Plain file in receiver file adapter. I am using module - StrictXml2PlainBean
My target structure is -
<MT_Name>
    <records>
        <Header>
        </Header>
        <Item>
        </Item>
    </records>
</MT_Name>
<Header> and <Item> are at same level.
When I use --
1. Header.fieldSeparator = ,
2. Item.fieldSeparator = ,
3. recordTypes = Header,Item
Then I get this error -
Message processing failed. Cause: com.sap.aii.af.app.modules.conversion.xml2plain.ConversionException: Invalid structure name encountered during conversion: records at XML element MT_Name,records
When I use --
1. records.fieldSeparator = ,
2. singleRecordType = records
Then I get this error -
Message processing failed. Cause: com.sap.aii.af.app.modules.conversion.xml2plain.ConversionException: The element nesting level for the structure MT_Name is too deep (reference: 3 levels, found: 4 levels) at XML element MT_Name,records,Header,Item
To add more details to the scenario, multiple records can be generated but one record will have only one Header, with multiple Items.
Any help in this regard will be highly appreciated.
Thanks,
Abhi

Hi Abhi,
Here you go....
For your target structure as:
<MT_Name>
<records>
<Header>
</Header>
<Item>
</Item>
</records>
</MT_Name>
Where I have assumed that <Header> and <Item> are at same level.
DO NOT use any Module just simply configure the receiver channel as below:
In the file Receiver Channel
Recordset Structure = Header,Item
Name                                                                    Value
Header.fieldSeparator                                             ,
Item.fieldSeparator                                                  ,
I have tried this and it works.
Let me know if you are facing any issues.
Cheers
Dhwani

Regarding receiver File Adapter

Similar Messages

Maybe you are looking for