Regarding Sales  Reports MC+Q and MCSI

Dear all,
                I want to know about sales report MC+Q and MCSI,
               What data are coming into following columns of these reports :
               1.  Sales
              2. Net Inv. Sales 1
              3. Net Inv. Sales 2
Thanks & regards,
Sandip Sonar.

Hi,
Sales-Net Value (from billing)
Net Inv. Sales 1-Subtotal 2 (KOMP-KZWI2)
Net Inv. Sales 2-Subtotal 2 (KOMP-KZWI3)
Regards
Sanjay

Similar Messages

  • Regarding sales report using MC+E

    Hi all,
          We are viewing sales report using T-Code MC+E. In the main screen there is a variant for the selection of period. The period we are giving there is pulling up calender year. We want it to pick Fiscal Year instead of Calender Year.
               Is there any where in the configuration that we can make that setting on.
                Can any one suggest me to resolve this issue. Let me know if I am not clear with anything.
    Thanks in advance
    Ravi Boppana

    Hi,
        I was trying to enter my fiscal period in the same field you instructed me to. When i went to OM01 there are no entries there. So should I create a new entry there. Can you pls assist me.
    Thanks in advance,
    Ravi Boppana

  • Regarding sales report

    hi all,
    i am working ALV reports there i m getting sales document values and returndocuments,what my requirments is returndocuments should display in the report but it should not add in the total. can any one help me to solve tis problm

    hi bhupal,
    thanks for ur reply. but i want the values but it should not add in the total.for example
    return values 20
    non retun values 60
    total 80 its coming .. i req only 60  ,
    Thanks in Advance

  • Regarding Crystal report  parameter from and to.

    hi.
    I am having one requirement ie.
    Normally we are giving..i.e
    We are using parameter in Sap b1 like Docentry
    Based on this one Docentry the data will fetch from the data base and it will shows into the sap crystal reprot
    suppose Ex Docentry = 3 then it will show the data.. then
    but ring now what i nee dis  Docentry from and to
    fromdocentry = 1
    todocentry  = 5
    so, 1,2,3,4,5 five documents should be generate one by one in crystal report in single crystal report not 5 pdf files single pdf should have 5 doc entries
    Is it possible how can i do it.
    how can i do it...

    Hi
    I think it is not possible from Crystal Report but below discussion indicates it is possible through some Crystal Report SDK tool.
    Exporting a Crystal Reports file into multiple PDF's
    How to export a crystal report into several pdf files then email them to several email addresses
    With Regards
    Balaji Sampath

  • Purchase and Sales Report

    Hi
       There is one requirment for Report, My client need a  report for pur & sales in which Purchase amount with Vat 4% and 12.5% should show seperatly colume can anyone help for this
    With regards,
    Gopal Krishna

    Hi,  all
    Actually here we have not Implemented SD Module and Sales Entry are flowing through FI Module, In this case Total Sales of the month and Tax Details. is there any such Standard Report for this?
    With Regards,
    Gopal Krishna

  • Sales Report for US Sales and Use tax

    Hi,
    I'm looking for t-code to extract detailed sales report having Gross sales, Exempt sales , Ship to state, Ship to County\ City,  Sales Tax collected. If I'm getting this report i can verify what my sales tax software is updating.
    When i extract  tcode - ZINVLIS i don't get much detail.
    Please help me in extracting complete sales detail which can be used for sales and use tax verification process and audit purpose.
    Thanks,
    Karthik

    Hi Karthik,
    There is no standard report available as per my knowledge.You may develop Z report to achive your requirment. Check some LIS report can give data (MC01 is transaction where you can check all type of key figure reports)
    Regards
    Mani Kumar

  • How set authorizations for sales reports and other reports in SAPB1

    Hi, I'm currently working in SAP Business One Version 8.82
    The issue I'm facing is that I want to set it up so that certain users cannot see other users' sales information.  I know that I can turn on or off the Sales Analysis Report for various users for instance, but what I really want specifically is this.  Suppose we have 3 different teams: Team A consists of (Angie, Angela, and Anita the manager), Team B consists of (Bob, Barbara, and Ben the manager), Team C consists of (Cat, Charlie, and Courtney the manager).  I would like to make it so that everyone can view the individual sales order documents of everyone else (in case a customer calls and needs information, but the salesperson who created that document isn't there); however, Angie should only see her own orders when she does a Sales Analysis while Anita, the manager of Team A, should see the the orders of Angie, Angela, and herself of course.
    To summarize, I'd like to see the following
    1.  Each salesperson can lookup and view any sales order.
    2.  Each salesperson can run an sales report to view all his/her own open sales orders.
    3.  Each manager can run a sales report on his/her subordinates, but not on the other managers or their subordinates.
    4.  The boss or other people working in corporate are able to run a report on all open sales orders.
    What's the best way to approach this?  Is it best if I create my own report?  I haven't created any reports from scratch yet, so I'm not sure exactly how that works.  I'd like to be able to group the salespeople up by location if possible.  The sales analysis report doesn't really do that, but it is useful.  I just don't want everyone to be able to see the numbers on their peers.
    Thank you I appreciate any help or advice.

    Hi,
    1.  Each salesperson can lookup and view any sales order.
    Answer:
    Create own report by using query and save under query manager and the assign for all group. So that all sales person can run this query  and can get sales order detail.
    2.  Each salesperson can run an sales report to view all his/her own open sales orders.
    Answer:
    Create individual query ( add condition in where clause slpname = 'XXX') for each sales person and save it under query manager and assign to particular user group
    3.  Each manager can run a sales report on his/her subordinates, but not on the other managers or their subordinates.
    Answer:
    Create query for only particular team (  condition is slpname = XXX OR YYY OR ZZZ) and save under query manager. Make schedule report on this and send it to only particular manger
    Same way create for another manager and schedule report.
    4.  The boss or other people working in corporate are able to run a report on all open sales orders
    Answer.
    Create query for all sales person and schedule report to big boss.
    Hope you can get an idea.
    Let me know if you need sales report ( advice required field)
    Thanks & Regards,
    Nagarajan

  • Sales Report problem with 2LIS_11_VAHDR, 2LIS_11_VAITM and other DS

    Hi Experts,
    I need your help in following topic. I have a requirement to build a big (overall) sales report in BI (NW2004s).
    I would like to use BI Content because I'm running out of time and try to use all preconfigured stuff if possible.
    In the requirement a bunch of fields of different SD DataSources are used (mostly 2LIS_11_VAHDR and 2LIS_11_VAITM but also some fields of other Datasources).
    In SE16 I know how to locate all the field in the tables VBAK, VBAP, KNA1, VBKD,
    LIKP, VBRK and of course some texts. Some fields could already be located by me, others couldn't even be found in BI.
    The difficulty I have is to bring all the DataSources together so that the data is displayed correct - even if there are redundant parts.
    For example:
    For sales orders the doc no, sales org, distr. channel (and a lot of other header data) should be displayed in each line together with item data such as item no., material code, quantity (and a lot of other item data). If an order has multiple items each item should be diplayed in one row in the report.
    In the Query the report should look like a common table (e.g. as in an ALV Grid if you model a query with SQ01) --> a lot of columns.
    I'm not sure if I should use one big DSO with multiple InfoSources or if I should create a MultiCube and add the BI DSOs 0SD_O03 (Orders) and 0SD_O01(Order Items).
    I know this is a very common requirement in SD. Do you know how to combine the most common SD datasources that no issues come up?
    Thank you very much in advance,
    Horst
    Message was edited by:
            Horst Henkel

    Hi Horst,
    Reporting on ODS / DSo is slow. I'm here at a cleint where we have lots of reports on SD_O01 and SD_O03. The best way to have good  query performance is to build cubes on top of your ODS. Build a sales cube on top of SD_O03 with all fields and a billing cube on top of SD_O01. Load the data from your ODS to your new cubes. Then create a multipovider on top of both cubes, identify the keyfigures and characteristics required for your queries. Build the queries on top of the multiprovider.
    You can display all items of a bill in one row if you choose drill-across for the irems in the query, instead of drill-down. So it looks for a standard SD report.
    Regards,
    Juergen

  • Sales Report - Shipped, Open By Region then Country and so on

    Hi All,
    We are new to BusinessOne. We have just rolled it out and i have to develop a report in businessobjects using B1 data which resides on sql server 2012. What my requirement is that they need a MTD sales report by customer group, shipped and open.
    My question is which tables i need to query to get this information from?
    I need all sales that were shipped and are open by customer group for the current month to date.
    If i am not clear, please ask for detail and i will try my best again. Thank you.

    Hi,
    Please use below tables and link as shown below
    ORDR and  RDR1 for sales order
    ODLN and DLN1 for delivery order
    ORDR T0  INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry left join DLN1 T2 on T2.[BaseEntry]  = T1.docentry and T2.[BaseLine]  =  T1.[LineNum] INNER JOIN ODLN T3 ON T2.DocEntry = T3.DocEntry
    Thanks & Regards,
    Nagarajan

  • Sales Reports for Sales Amount and GP, Excluding Surcharge

    Hi All,
    my company is going to charge some customers delivery charge. It is implemented as a kind of surcharge on Sales Orders. The surcharge can be found as a condition type in FI document after posting.
    Our salesmen want to know the sales amount and GP (Gross Profit) of material, not include the surcharge.
    Could anyone suggest any Sales Reports that can show the GP of material excluding the delivery surcharge?
    Regards,
    Simon

    Hi............
                         Refer stock posting list report........
    regards,

  • Purchase and sale report

    Dear All Experts,
    I WANT A QUERY IN WHICH I GET THE FOLLOWING DETAILS:-
    The logic should display item wise purchase and their sales details with qty and sr# for a given period of time.
    i.e suppose any item is purchased with 100 qty and against them i want to know its sales details.
    GRPO ITEM NAME, GRPO#, GRPO DATE,INVOICE NO,INVOICE DATE,INVOICE QTY,INVOICE ITEM NAME,INVOICE ITEM SR#

    Hi,
    You should check out the Serial Number Transaction report. If you choose to run it by Documents, you will want to keep in mind that if you do a Delivery before Invoice, the S/N will be on the Delivery not the invoice.
    Tip:  select the 'Display All Transactions for Selected Item' field as depending on your criteria, not all transactions will be displayed.
    HTH,
    Heather

  • Sales report: Profit center wise includes net, gross and sales tax URGENT

    Helllo Friends,
    Please help me on the below report
    Client requirement is: Sales report which includes the below
    1. Profit center
    2. Net sales
    3. Sales tax
    4. Gross sales
    5. Period
    Please help me
    Thanks for your help in advance
    Narasim

    Hi,
    You will have to get a Z report developed for  this requirement, it will be a Sales Register looking at the requirement
    Firstly discuss with the client and finalize the selection screen , based on which parameters the client wants nto check this report
    1. Customer
    2. Billinng Document
    3. Sales Area
    4. Billing Type
    5, Period
    And based on this system can collect all the billing documents (except cancelled) and pick up the required values from the billing document tables.
    Finalize if the client would also like to see the all the discounts, freights, rebate (if any) , taxes (separetly) , exchange rates (exports) and any other condition types, this will save all the modifications in the future.
    Also finalize what all billing types have to be excluded, like cancelled, credit notes, debit notes etc and also how the values have to be displayed, rounded off.

  • Hi, i was wounding if anyone would help me get information on the company regarding the acquisition of, beats by dre, could someone please help me out as i am doing a college report on this and need some good sources of information

    hi, i was wounding if anyone would help me get information on the company regarding the acquisition of, beats by dre, could someone please help me out as i am doing a college report on this and need some good sources of information

    Try a search with Google.
    Why should we do your homework for you?

  • Regarding reporte execution time and date

    hi all,
    Is there any table in sap which can give me date and time of last execution of a report.
    Thanks and regards .
    Punit

    Hi
    I exactly don't know but i can provide you with the list of table names where BASIS people are gonna use them
    http://www.saptechies.com/list-of-important-transaction-codes-tables-programs-reports/
    check out this tabel  i hope it helps you
    DBSTATC
    Regards
    Pavan
    Edited by: Pavan Bhamidipati on Jul 18, 2008 7:57 AM

  • Regarding running a report in background and generate spool

    Hi,
    I am developing a report [<b>REPORT1</b>].
    It is taking long to execute if data is more.
    Now i want to schedule this report in background and generate spool along with.
    So once i execute REPORT1 it should run in background & generate spool?
    Can anybody give inputs for the same!
    Thanks,
    Deep.

    Hi,
              to generate spool, use below code
    FORM create_spool .
    CONSTANTS : l_c_device(4) VALUE 'LOCL'.
    Create Spool Request
    NEW-PAGE PRINT ON
    LINE-SIZE 120
    DESTINATION l_c_device
    IMMEDIATELY ' '
    KEEP IN SPOOL 'X'
    NEW LIST IDENTIFICATION 'X'
    NO DIALOG.
    ENDFORM. " create_spool
    And after createing spool to get the spool number use below code,
    FORM obtain_spool_id .
    TYPES : BEGIN OF t_tsp01,
    rqident TYPE tsp01-rqident,
    rqowner TYPE tsp01-rqowner,
    END OF t_tsp01.
    DATA : it_tsp01 TYPE STANDARD TABLE OF t_tsp01,
    wa_tsp01 LIKE LINE OF it_tsp01.
    SELECT rqident
    rqowner
    FROM tsp01
    INTO TABLE it_tsp01
    WHERE rqowner = sy-uname.
    SORT it_tsp01 BY rqident DESCENDING.
    READ TABLE it_tsp01 INTO wa_tsp01 INDEX 1.
    IF sy-subrc = 0 .
    v_spool_nr = wa_tsp01-rqident.
    ENDIF.
    Capture the immediate spool created for this report
    v_spool_nr = sy-spono.
    ENDFORM. " obtain_spool_id
    <b>Reward points</b>
    Regards

Maybe you are looking for