Regarding SHDB at 3.0D system
Dear guys,
we are just going for upgrades from 3.0d to enterprise.
I think transaction SHDB is not available in 3.0d. so we have problem in dealing with BDC work.
Could you please tell me is there any alternative tr-cd for shdb or any way to replace Shdb work in 3.0D version.
Appreciate your answer.
Ambichan.
Hi Ambi,
LIVEINTERFACE IS A SET OF SOFTWARE COMPONENTS THAT ACCELERATES THE CREATIONAND MANAGEMENT of complete and reliable data interfaces for SAP R/3. Through a familiar user interface, LiveInterface significantly enhances the productivity of both junior and seniorABAP/4developers in theirefforts to create simple and/orcomplex interfaces into SAP R/3.LiveInterface can generate inbound or outbound, batch or real-time interfaces with ease.Not only does LiveInterfacequickly generate interfaces which can access any data transaction within SAP R/3, but it can also incorporate BAPI objects stored in the R/3 Business Object Repository,allowing your interfaces to leverage the SAP BAPI capabilities.
Regards,
Raj
Similar Messages
-
Doubt regarding SHDB transaction
Hi All,
I have a doubt regarding the Process Tab in the application tool bar of SHDB transaction. What is the use of the following check boxes?
1) Default Size
2) Cont.after commit
3) not a batch input session
4) END: Not a Batch Input session
5) Simulate Background modeHi,
Basically these are the properties for CALL TRANSACTION using. You need not worry about these unless you really need those.
1) Default Size: it will set the Default screen size for CALL TRANSACTION USING...
2) Cont.after commit : it will set indicator that CALL TRANSACTION USING... is not completed by COMMIT. after commit also the process will continue
3) not a batch input session: sets indicator that present session is not batch input
4) END: Not a Batch Input session
5) Simulate Background mode : session will be run in foreground. but similar to back grpund
you can see the documentation by placing the cursor on these and click f1. -
Regarding posting invoice to sap system from non r/3 system
HI experts,
I have to create or change the existing invoice in sap system by using the idoc. Idoc has been extended to meet customer requirements. for creating i am using BAPI_INQUIRY_CREATEFROMDATA2 and for changing i am using BAPI_CUSTOMERINQUIRY_CHANGE in the same function module Z_IDOC_INPUT_INQUIRY_CREATEFRO (standardd one: IDOC_INPUT_INQUIRY_CREATEFROMD)
It is working fine for the creating but it is going into dump for change by giving error messge fm is not called properly. I am passing same all parameters to the change bapi like i have passed for the Creating bapi. please help me out in this.
Thanks & regards,
Prasanna
*good solutions will be rewarded***Hello Prasanna,
Go to transaction SE37, put in 'BAPI_INQUIRY_CREATEFROMDATA2' and use menu entry
- Goto - Documentation - Function Module Documentation
There you can find a description of the various parameters for that BAPI.
Regards,
Michael -
Help Regarding Xi integrating with Seibel System.
HI @,
I have to intergrate a seible system with R/3 but I haven't worked on the same before.
I need help regarding seibel inetrgartion scenarions and various adapters that can be used in that conditions.
Documents on Seible Integration will b really helpful.
RegardsIt would be better to go for the iway adapter for this integration requirement. The other documents can be obtained direclty from iway
Regards,
Prateek -
All Information regarding Change and Transport management System in SAP
Hello Experts,
Iam into Basis . I need all information ,fundamentals and concepts over Change and Transport management system in SAP .Its fundamentals,the way it works ,how requests r transporteded etc. I want more of this information in regards to practical scenario. Plz dont provide help link as iam aware of that. I need good explanatory content ,in your own words shall be appreciated more. If any body has any self prepared good explanatory and procedural matter , tat will be of help.requested to revert at earliest as this is a bit urgent. My Email Id is [email protected]
Useful answers shall be rewarded points.
Thanks and Regards,
Somyacheck this link
http://help.sap.com/saphelp_47x200/helpdata/en/d7/8eb9361a75ea43e10000009b38f839/frameset.htm -
Buget Exceed problem regarding material transfer in project system
Hello Sir,
I have a problem regarding budget in project system.
when i do budget and release . and do any transaction
with that budgeted wbs element in particular project.
i get budget excced errors usally.
however, budget remains more than exceeded buget.
Let us touch with a example in brief, we have a buget for a L&T project 10 Lakh.
Buget Release actual cost total cost commitment
10Lakh 10Lakh 8lakh 1Lakh
when i transfer a material from another project to this L&T project material worth is 50thousands.
i get a errors for L&T project budget exceed with 40thousands.
however in project budget remains 1Lakh remaining .
why system shows errors for this material transfer worth rs 50thousands
Please help me regarding this problem where is 1lakh budget
with regards
sanjay agrawalHello sir,
there is no any problem regarding budget supplement but if project sometimes
remains 20lakh buget price remaining out of 50lakh.
and need 1 lakh material price for transfer in project
then why need to do budget supplement for 1 lakh if project
remains 20lakh price rest.
please guide me for above problems
with regards
sanjay agrawal -
Regarding Backup of ABAP+JAVA system
Hi,
We've ECC 5.0(ABAPJAVA) system in which we've configured JDI and NWDS was installed on server's desktop. Now my concern here is how to take the backup of ABAPJAVA system which should include NWDS changes as well.
Please give me some suggestions on this.
Thanks in Advance.
Kind regards,
MogileeswarHello,
Please see Markus Doehr's response
at
Re: Backup/Recovery strategy for SAP netweaver 7.0 SR3 connected to BI JAVA
I suggest you consider those as two different instance even if they run on the same hardware.
Taking a backup of a Java instance to a restorable state (in case of a DR) requires:
- a database backup
- a backup of the \usr\sap\<SID-of-J2EE> at the same time the database backup is running
- a registry backup (including the users and their UUIDs)
This will enable you to install a plain operating system, installing the database software and recover your Java instance. Note: This works only if the hostname and the SID are the same as on the original system. This procedure can not be used to do a system copy of the Java instance.
Taking a backup of ABAP is almost the same:
- a database backup
- a backup of the \usr\sap\<SID-of-ABAP>
- a registry backup
Since it's not possible to restore the registry partially but only completely a restore of it will overwrite the current values which is not a problem since they are basically the same.
The BI-Java instance is not directly dependent on the BI-ABAP backend but depending on where your users are stored the Java instance might not come up if your ABAP is not running.
Regards,
Paul -
Regarding no party no technical system, or anything when log into IR
Hi all:
Technical systems(ABAP type) and business systems(ABAP type) have been created in SLD, however when log into Integration Repository, there is nothing on object Panel, no technical system or party , totally empty, could you please tell me how to import or the possible reason for this ?
Thanks in advance!!!HI Sony,
Can you confirm r u in the Integration Directory or in Integration Repository??
You can not find the Business System and Party in IR.
If you are in ID you need to create the Scenarion and then you can get the party, servicewithoutpary,receiver determination, Interface determination, sender agreement and receiver agreement.
Now you can assign the Business systems from the SLD to the Business System under servicewithoutparty-> Business Systems.
YOu cannot findout the Technical Systems in the ID also.
Regards
Sridhar Goli -
Regarding problem while assigning logical system
Hi Friends,
I had a problem while assigning logical system to the client where in both of my systems are having same client number which belong to 2 different systems.
while assigning the sender and receiver logical system to the same client i am facing problem stating that an entry has already been made for the same key.
could any one plz give me a clear idea...while assigning logical systems (cross clients) for 2 different systems having same client number.
Regards,
MadhuHello Madhusree,
I'm running with same problem. I've created two logical systems and assigned them to two different clients. But here pops up the issue while generating partner profiles, throwing error "No active plan version exists". Later when I researched about the issue, I came to know that T77S0 table doesn't have any entries regarding plan versions. Basically, I created two clients by doing "client copy" from source client (800 & 100). And I could see plan version entries in the T77S0 of client 800. So, I thought of assigning just defined logical system to the source client 800 itself. But it throws error saying "entry already exists"; as client (800) is already assigned with other logical system.
By coming across your post, gives me leap of hope that two logical systems can be assigned to same client. Could you please share me those troubleshooting steps concerning this issue. Points will be awarded.
Regards, Anil. -
Regarding transfer LSMW from one system to another
Hi experts,
I have a LSMW project, subprojects and objects in a system. I have to transfer or upload the entire LSMW project into another system with all its rules and recordings.
I tried with export and import option on LSMW. But only the texts are copied. Recordings are not copied into the system.
Please give me the solution for this.
Thanks and regards
SundarHi,
U need to create change request
LSMW-EXTRAS-GENARATE CHANGE REQUEST.
Then which client do u want
go to the system
Using the transaction code scc1-Enter the Source client and request no.
It will transport the entier lsmw.
Thnx. -
Regarding Back Up of ERP systems
Hi Experts,
I want to know if the back up data of our ERP system is lost then is there any way to recover it again?
Please provide me information regarding this question as early as possible.
Thanks and Regards
Kirtish DoshiHi,
For the recover of the database, you don't need another parallel system. But you do need free space to store (temporarily) the archived logs you will restore from the tapes before recover the DB.
If you loose 1 of the needed archived logs, you will not be able to recover to a later point in time.
For exemple, your system crashed at 15H00, you ran an oline backup during the previous night starting 03H00 and ending 05H00; your DB is in archive log mode, and you have on tapes the 100 archived logs generated between 03H00 and 14H55. With this you should be able to restore your system as close as possible to the crash time (around 14h55).
If you miss 1 archive log, let's say one that was generated at 10h00, you will not be able to restore to a later time than close before 10h00. If you loose one that was generated at 03h30, you will be able to restore the online backup, and you have to restore the backup of the day before...
Total down time for your system will be restore time of the online backup + recover time of all the archived logs. The more redologs you have, the longer your downtime will be.
Replay archive logs is fastidious, that's why important systems need to be backed-up everyday.
If your system is important enough, there are solutions with standby database to prevent long downtime in case of crashes. (another system with DB in special mode and recover of the archived logs generated on the first system with a short delay.)
Regards,
Antoine -
Hi Guyz,
I am able to estimate the resource required for a design only after the synthesis is done in the Vivado.
The question is:
Is it possible to estimate the resource in system generator (Vivado IDE 2014.3.1) itself ?
Couldn't find the RESOURCE ESTIMATOR block in the system generator [xilinx blockset/tools] as in its precursor, i.e. System generator (ISE).
When i went through the documents, came to know that resource estimator block has not yet been introduced in System generator - Vivado IDE [Please correct me, if i am wrong]
Is there any way [other than checking utilization report after synthesis], which will allow me to estimate the resource as soon as the algorithm is ready - as a system generator model ?
PLEASE GUIDE.
THANKS in advance.
Thanks & Regards,
AnanyaHi Satish,
Thanks for the quick reply.
My doubt:
Can I find the resource estimation for the algorithm model using ISE and then approximate the resource at Vivado ? [Not sure if this makes sense, just wanted to know if this approach works]
Please suggest.
Thanks & Regards,
Ananya -
Issue regarding condition pricing date as system date for some condition types in sales order
Hi
I have already created a sales order on 30.04.2014. Today I am adding new line item to sales order in VA02 transaction. in this order new line items condition pricing date for conditions JEX2,JECX should show as 12.06.2014. But currently it is showing as 30.04.2014. I need condition pricing date as system date for above conditions.
Regards
prashantHi
When I am changing pricing date VBKD-PRSDT in sales order header . It is changing the condition pricing date for all. Sales order is created on 04.06.2014. I have added line item 150 on 14.06.2014.
After adding line item 150 , there I have changed the pricing date as 14.06.2014. in sales A tab of item 150. But still it is taking from Sales order header date as 04.06.2014 for all conditions. But my requirement is for line item it should take as system date for some conditions like JEX2,JECX& JA1Y but for other conditions it will take as Order creation date. Please suggest. I have also attached screen shot below. please go through it.
Regards
PK
Sales order header change mode VA02
Here pricing date VBKD-PRSDT = 04.06.2016
Item change mode
I have added new line item 150 on 14.06.2014
Changed the condition pricing date to 14.06.2014 & saved
After saving I have gone to Va02 screen of line item 150
& there I have gone to condition pricing date field from item condition tab
for JEX2 condition type but still here condition pricing date is showing as
04.06.2014 as below.
Condition pricing date
My requirement is like this
For some particular conditions like JEX2 condition pricing date will take as system
date instead sales order creation date when I will add a new item 150 on
14.06.2014.but for other conditions it will show as order creation date for the
same line item 150 . -
Regarding Sales / Service Order Processing System Business Package.
Dear All,
I have here ECC 6 and EP 7.
Can anyone tell me that what is the appropriate Business Package / Application Package / XSS Framework is required for Sales / Service Order Processing.
Here we don't have CRM.
Kindly advise me what all is required for Sales / Service Order Processing which includes Placement of Orders, Status of he order, Amount to be paid etc.. Functionality in it to be shown in portal.
Regards,
Sidhartha ChatterjeeCan you give me a step by step approach for setting up the ITS connections for these business packages and pull the data?
I have created the sytem with same name as given in the error i.e.SAP_R3_SalesService
I have given the ITS connection parameters for this system name.
Now i went to "Connection Tests". Checked "ITS connection" and hit Test.
Here it gives the following.
Results
1. The system object represents an SAP system.
2. The following parameters are valid: wap.ITS.path (sap/bc/gui/sap/its/webgui) ; wap.ITS.protocol (http) ; wap.ITS.hostname (xxxx.xx.dir.xxxx.com:8080)
3. HTTP/S connection failed. Make sure the protocol, host name, and user mapping are correctly defined.
Step 2 says that the host name and protocol that i gave is correct.
I did the user mapping under the link "Personalize".
If i have to do the user mappping under User Administration->User Mapping, i am not able to see the sytem name "SAP_R3_SalesService" in the drop down. -
HELP regarding reconiciliation of Purchase orders system
What the need is:
A report per country that shows PO no., amount of PO, Goods recived amount and total invoiced amount by a date, because the total amount of the GR amount for the country has to be identical with the open amount on the GL account. And it is at company code level.
~Regards
Edited by: aakansha kumar on Sep 28, 2009 12:18 PMThere is no report "per country" , you can get most of your information from ME2M ( but not directly , ull need to take dump in excel and use formulas :P ) .
Other reports which may be helpful are ME80FN , MB5S .
Maybe you are looking for
-
I don't understand firmware, but I know I needed to update my CP2025dn printer's firmware. I used my older computer to do this. If I had used my newer computer with Windows 7, would this affect my printing from either computer? Thanks.
-
How to create sensitive textarea in java
I want to create system that will load a file and display its text on the JTextArea and when clicking on a word from the text editor the clicked word should be returned( like as it is with combo box). I am able to load the file. But how to deal with
-
Adsl connection not working? Please help
Hey guys, I'm going crazy trying to get my cisco 1701 adsl modem to work. My setting are below, please tell me what is wrong??? User Access Verification Password: Gateway>enable Password: Gateway#show run Building configuration... Current configurati
-
I recently was using my phone and i cant get it to turn on because it is stuck on the Connect to ITunes screen and i dont have ITunes and cant download it either how do i get it to work...Please help!
-
Connecting to Websphere Message broker from SAP
Hi Iam working on Websphere Message Broker(WMB). We have to integrate SAP system and WMB, to receive messages from SAP and forward them to other resource; taking the message from the resource and sending it back to SAP, along with the message status