Regarding the BADI ME_REQ_POSTED after saving the tcode ME51N
Hi,
Currenlty i am using the badi ME_REQ_POSTED to update the header texts in ME51N while creating the PR.
I am getting the PR number through IM_EBAN.
My issue is that i have written the code in the badi to pass the input of that PR number in table RSDBS to get the reservation number.
But once the transaction ME51N got saved, then only the table RSDBS is getting updated with the generated PR number.
Is there any way to get updates of the table RSDBS before the transaction got saved.
Please let me know if my question is not clear.
Thanks & Regards.
Prabu
Hi,
I don't think this is possible functionally? To achieve this, you need to modify the std code.
Regards,
Raj
Similar Messages
-
How to get the Details Regarding the tcode like used by and used in .
Hi all,
My requirement is if i give the Z* Tcode in the selection screen I should get the details like program Name and Creator Name and created on and last Changed by and used by and used in Related Data.
Somehow i managed to get all the data except for two fields used by and used in .Please let mke know is there any Function Module to fetch the used by(User Name ) and used in data or any table where this data is saved.
Thanks in Advance.
Regards,
NaveenHi Naveen,
What are you exactly looking for in "used by" (if it's who launched the transaction lastly -> performance statistics, transaction ST03N, search forum how to read it) and "used in" (programs in which the transaction is statically defined in CALL TRANSACTION, and other statements -> CROSS table)?
BR
Sandra -
Hi all,
I had created one Z.... table.Iam using that table and it is changed by someone.
Is there any TCode to know who had done the changes to that table.
Thanx in advanceHello,
Check in the attributes of the table.
The last changed name and date will be available in that.
Vasanth -
Hi,
I am getting Message having CALL_FUNCTION_NOT_FOUND after saving my document in ME22N Tcode.
Message i am getting in my inbox:
Transaction.. ME22N
Update key... 80234FDE6D51F11C9004001A6435E8C6
Generated.... 02.06.2009, 05:15:29
Completed.... 02.06.2009, 05:15:31
Error Info... 00 671: ABAP/4 processor: CALL_FUNCTION_NOT_FOUND
Can any one please tell what will be the problem?
My out type also configured correctly with function module routine and program name.
Please reply.
Regards,
Kusuma.Hi Karthik,
Thank you for ur reply.
I did not implement any user exit/ badi. Dump is saying that my smarform function module does not exist in the se37 library.
I have excuted my form through se38, that time is working fine. When i tried through output type it is going to dump.
Regards,
Kusuma. -
BADI after saving the billing document
Hi Experts,
Please tell me the BADI name which will be triggered after saving the billing doc
Here once the customer billing document will be saved, BADI will update the equipment master.
Regards,
Sandeep
Edited by: Sandeep Ballewar on Jul 1, 2010 11:49 AMHi,
Can anybody throw some light on below issue?
Regards,
Sandeep -
BADI / User exit for Purchase order(ME21N) after saving the document
Hi expert,
I need the BADI / User exit for Purchase order(ME21N) after saving the document
This is for email sending after create the purchase order so PO document number will be the import parameter
pls help me
point will be reward
Regards,
GaneshHi Ganesh,
Could you please share your solution?
Thanks.
Hoops
Edited by: Hoops on Jun 13, 2011 10:51 PM -
What are the User Exit Available after saving a Billing Documents
Hi,
What are the User Exit Available after saving a Billing Documents
Regrds,
BinayakHi
Check the following Exits for VF01 Tcode
V61A0001 Customer enhancement: Pricing
V60P0001 Data provision for additional fields for display in lists
V60A0001 Customer functions in the billing document
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
V05I0001 User exits for billing index
SDVFX011 Userexit for the komkcv- and kompcv-structures
SDVFX010 User exit item table for the customer lines
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX006 User exit tax line in transfer to accounting
SDVFX005 User exit reserves in transfer to accounting
SDVFX004 User exit G/L line in transfer to accounting
SDVFX003 User exit cash clearing in transfer to accounting
SDVFX002 User exit for A/R line in transfer to accounting
SDVFX001 User exit header line in delivery to accounting
Business Add-in
SD_CIN_LV60AU02 BADI for billing
VOR_WA_FAKTURA Billing before Goods Issue
Reward points if useful
Regards
Anji -
Invoice outputs are not printing after saving the document..!
Invoice outputs are not printing after saving the document. Eventhough we maintain all condition records not only that Processing log also it showed that it has been processed on some date. but customer not received the printout
AmarhI,
GO TO IMG, SD, BF, OUTPUT CONTROL, OUTPUT TYPES, SELECT UR OUTPUT TYPE, GO TO DETAILS ICON AND ASSIGN THE VALUE "ISSUE OUTPUT IMMEDIATELY SAVING THE APPLICATION" FROM DROP DOWN DOWN LIST IN THE DEFAULT VALUES
AND ASSIGN THE RELEVENT PRINTER TO USER ID IN SU01 AND IN CONDITION RECORDS
REGARDS,
SK
Edited by: Sadanandam Kasarla on Mar 16, 2009 12:07 PM
Edited by: Sadanandam Kasarla on Mar 16, 2009 12:08 PM
Edited by: Sadanandam Kasarla on Mar 16, 2009 12:10 PM -
The approver does not show in the approval preview after saving sh. cart
Hi ,
I would appreciate if anyone can reply me for fixing the problem.
Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
Details of the problem:
The following steps specify the problem in detail , it is applicable for both the workflows WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
1. Shopping created
2. The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
3. Shopping cart is saved.
4. After saving , Check status transaction shows the shopping cart in status awaiting approval
5. The section approval shows No workflow started , application error occurred
6. T.Code SWI1 shows the workitem created for the shopping cart but in error.
7. The work item container does not show any agents
I would appreciate it anyone can reply as to how to fix it ASAP.
Best Regards
PawanHi Disha,
I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
SLG1 shows all green entries and there are no entries in RZ20.
I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
What should I do.. , anything am I missing .
Thanks and Best Regards
Pawan -
Need to reopen the form after saving
Hi All,
I am developing a form for employee time sheet. I am using the ON-INSERT Trigger to insert the details of the employee. I need to reopen the form after inserting the details into table. I tried using the NEW_FORM bulit-in in POST-INSERT Trigger. but getting an error: FRM-40737 illegal restricted procedure NEW_FORM in POST_INSERT) Trigger. Can any one please how can I do this.
Thanks and Regards
SaiHi Jeneesh,
Thanks for the reply.
I need to clear the form after saving and also I made the Update Allowed property to 'NO' as client per requirement. So, every time after saving the form, I am getting an error message 'Update is not allowed on this form' . in order to avoid this message after saving I want to close this form and open it again.
Also I need to clear the datablock. where can I clear the datablock after saving it.
Thanks
Sai. -
Is there any user exit after saving the material doc
Hi,
Is there any user exit in the T-code:mb01/migo after saving the material doc,?I want to record some data when the doc is saved.
thanks,
lanceHi
Please check <i>The enhancement MB_CF001, includes a function module that is called up immediately before the COMMIT WORK when a goods movement is posted.</i>
Regards
Ramakrishna -
Table Maintenance Events - "Event 02 After Saving the Data in the Database"
Hi,
Can we identify the record marked for deletion in the "Event 02 After Saving the Data in the Database" ?
Thanks & Regards,
Esha RajLook at online documentation :
- [Event 02: After Saving the Data in the Database|https://help.sap.com/saphelp_nw04/helpdata/en/77/06b11859f511d2a6070000e82deaaa/frameset.htm]
. - [Internal Table TOTAL|https://help.sap.com/saphelp_nw04/helpdata/en/77/06b11859f511d2a6070000e82deaaa/frameset.htm]
. . - [Field Symbols <ACTION> and <ACTION_TEXT>|https://help.sap.com/saphelp_nw04/helpdata/en/77/06b11859f511d2a6070000e82deaaa/frameset.htm]
. . . - [Constants for Field Symbols <ACTION>, <ACTION_TEXT>, <XACT> and <XACT_TEXT>|https://help.sap.com/saphelp_nw04/helpdata/en/77/06b11859f511d2a6070000e82deaaa/frameset.htm]
Regards,
Raymond -
Fields are still in EDIT mode even after Saving the Transaction in UI
Hello Experts ,
We are facing one problem in UI .
We have added the BLOCK " Subject" in Complaint transaction ( BT120H_CPL) .
We are able to fill the data in the fields for subject block like " Code, Code Gruppe etc, but even after saving the transaction these fields are in Edit mode .
Can anyone give some pointers/solution to this ?
Regards
VBHello,
if the fields are in Edit mode or closed is controlled by the attribute VIEW_GROUP_CONTEXT of the controller class (*IMPL).
There are also methods to change this VIEW_GROUP_CONTEXT depending on the requirement like "DISABLE_VIEW_GROUP_CONTEXT".
But as i understood you correctly you do not have a own developed view but a SAP standard view. In this case i would create a OSS-Message for the issue.
But feel free to do some debugging on this VIEW_GROUP_CONTEXT.
Best regards
Manfred -
User Exit in MIGO after SAVING of the document.
Hi,
After posting a MIGO transaction, I want to post another migo transaction immediately through a BAPI. The BADIS/ EXITS which I found gave a dump as there were two MIGO transactions happening at the same time.
I need a BADI/EXIT after all the data from my first MIGO transaction is posted. This will not cause any confusion in the system... thus avoiding dump hopefully .
Please suggest BADIs/Exit which will serve my purpose.
Thanks & Regards,
Abhishek MondkarHi
I would suggest to define an output type for the material document.
Assign the program to this output in configuration which will trigger the posting of another MIGO.
You may use transmission medium as 8 -Special function.
I hope this helps you.
Regards
Prasad -
In Sales Order form populate charges field after saving the Sales Order
Can we populate Charges field in Sales Order form after saving the sales Order automatically.
The charges to be calculated based on the amount entered and the item selected in Sales Order.
In the Manual process it is done by hitting the Actions Button and then select the Charges.
The charge type would be "Freight Costs"by using process_order API, I am able to update the charges field.
Maybe you are looking for
-
Hello SAPians, I am looking for some information regarding a workflow which is creting issue. Issue is: workflow has been created and this is the information of that. **''Description** **This workflow is triggered when a user attempts the release of
-
Assessment Cycle(KSU5) - Allocating Cost for Only One Month
Hi, I want to allocate cost relating 2008 from cost centres to WBS. For that I'm trying run the assessment cycle(ksu5). The test results shows allocation of cost for the month of Sep2008. i.e It doesn't allocate cost that are posted before sep and
-
All Facebook friends profile pictures are missing, please help?
All of my Facebook friends profile pictures are missing as well as mine. I can see all the photo's that they post to there wall but the little profile pictures are missing? I have heard that this has been an issue for some! Any suggestions?
-
I'm trying to clean up my computer. have J2SE Runtime Environment 5.0 updates 10, 11, 4, and 6; Have Java (TM) 6 UPdate 2 and UPdate 3 and Java (TM) SE Runtime Environment 6 UPdate 1 all using very much memory...can I delete any of these?
-
Satellite C660D - A-key is broken
hi ppl, I bought my new Satellite C660D few weeks ago. Its great to work with it, but the damn A-key is broken since I've got it. What I have to do to solve that problem? Do I need a whole new keyboard? If i do, could I have another keyboard, which h