Regarding the JavaEE Tutorial 9.1 (sep. 2007) - problem...

Hey there ! i have a question , i am following the JavaEE Tutorial 9.1 (sep.2007), and i am wondering if the examples in this book (Duke's Bookstore, Duke's Bank, CoffeeBreak) can be deployed using BEA Weblogic Server 9.2 or newer (even maybe imported into their BEA Workshop instead of NetBeans?)...and if this can be done,do you have any ideas on how...or what is the best approach?
Thank you in advance !

neodude wrote:
Hey there ! i have a question , i am following the JavaEE Tutorial 9.1 (sep.2007), and i am wondering if the examples in this book (Duke's Bookstore, Duke's Bank, CoffeeBreak) can be deployed using BEA Weblogic Server 9.2 or newer (even maybe imported into their BEA Workshop instead of NetBeans?)...and if this can be done,do you have any ideas on how...or what is the best approach?
If it can't be done, the Java EE spec is a lie. You should be able to deploy any Java EE app on a compliant app server.
The trick is writing the code so it doesn't depend on which app server you're using and adding the app-specific configuration that you need.
You should be able to add in a weblogic-application.xml and be good to go.
Best advice? Try it.
%

Similar Messages

Where can I find The JavaEE tutorial in the downloaded Glassfish and EE SDK

Where can I find The JavaEE tutorial in the downloaded Glassfish and EE SDK.The downloaded URL is (http://java.sun.com/javaee/downloads/index.jsp). I downloaded the whole pack.It includes the Java EE tutorial, But I can't find it to view offline
Varuna

The LOAD command instruction is 0xE8 and not 0xE0/0xE1.
Lc is one byte, so how can you exceed FF?
Optionally the LOAD response can include a receipt (delegated management). If your card mandates a response length of 1 byte (Le=01) it means that no receipt is expected --> receipt length 00. JCOPs LOAD command has Le=0x00 set by default --> response length undefined. This is in accordance with Java Card API, which follows the ISO 7816-4 APDU structure.
Let's look at the help of the JCOP tools upload command:usage: upload [-p|--progress][-c|--components][-r|--random][-l|--package package-name][-s|--sd SD-AID][-m|--params parameters][-b|--block_length length][-a|--auto][-d|--load-debug] CAP-file
-c|--components
            Load CAP-file component wise.
-r|--random
            Load with random APDU length.
-b|--block_length length
            Max. block (APDU) length sent to the card during package upload.
    length Max. block (APDU) length.So you can set the block length --> Lc as you wish.
Message was edited by:
lexdabear

BookDBAO bug in JavaEE tutorial bookstore1

In the JavaEE tutorial example bookstore1, BookDBAO is a java bean stored in context scope and used by all threads. In BookDBAO, the not thread-safe EntityManager em is used by all threads to db actions. I think this is a bug since EntityManager is not thread-safe.
Regards,
Rice

invalid target release: 1.6seems like the version of Java you have installed is too old. Install the latest Java 6 JDK and make sure that its bin directory is the one added to the PATH system variable, plus is the one set in the JAVA_HOME variable.
That is basic Java stuff by the way: I hope you are familiar with Java (not only the language, but also the tools!) itself before you try to dive into Java EE development. If not, you'll probably end up being very confused and frustrated.

Need inputs regarding the dvd drive on primary ide channel.

Specs:
Motherboard: MSI P35 Neo3 (MS-7935 1.0)
CPU: Intel Core2 Duo E6550
Memory: Team Elite DDR2800 (2x1GB Dual Channel)
Hard drive: Seagate Barracuda 7200.11 500GB 32MB Cache (SATA)
Optical drive: LG GSA-H55L (IDE only) Firmware version 1.02
Graphics card: Gecube HD3870
Chipset: Intel P35/G33/G31 (Rev. A2)
Southbridge: Intel 82801IB (ICH9)
LPCIO: Fintek F71882F
BIOS: AMI V1.1 (11/07/2007)
Hello,
Almost all new motherboards today only have a primary ide channel and the rest are SATA.
I need inputs regarding the dvd drive which is shown in device manager as located on the primary ide channel while the hard drive is located on the secondary channel. Because I would like to update the dvd drive to the latest firmware (version 1.06; to be able to recognize more blank media) but the LG site recommends that the drive (dvd) be located on the secondary ide channel.
I already tried to uninstall every channel from the device manager but all would still be the same after reboot, dvd drive on primary, hard drive on secondary.
Current ide mode in BIOS is set to AHCI+IDE mode, DMA modes are fine (UDMA4 for dvd, UDMA5 for hard drive), boot sequence (1st=HD, 2nd=DVD, 3rd=Floppy drive)
Tried switching to IDE mode only in BIOS but would not detect the optical drive. Never tried RAID+IDE mode since I only have a single hard drive.
I'm not sure but if I try to update the firmware, it might instead try to update the hard drive's firmware instead of the optical drive and make the hard drive unusable.
I would like to know if anybody with this same situation was able to successfully update the optical drive's firmware or is there some way to place the optical drive on the secondary ide channel and the hard drive on primary for me to follow and replicate the process.
Thank you for any replies.

Thanks sir NovJoe for the reply.
Just received the solution from another forum where I posted the same problem.
They said that the flash program for the firmware will detect the drive on its own and would not flash other devices except the optical drive itself. So its pretty safe, and I can confirm this since I just flashed my ODD a little over a while ago and everything went fine. No errors.
Though I'm speaking for the brand of ODD I own and may be different for other brands so take precautions as well. It may be different for the others.

I need a new Macbook but -.I need advice regarding the new fixed configurations

I have a MacBook from 2007 and it probably needs replacing as I'm starting to see problems, little hints that any day it might completely stop working. I was ready to buy a new computer but after reading about the new MacBook Pros, it seems like Apple has forgotten its roots.
Let's say you get 8 GB of RAM which is probably enough for my purposes( but I'm still not sure, I might get 16 though its very expensive) and there is a problem with the RAM. Do you really have to replace the entire logic board and what are we talking in terms of parts and labor assuming you are out of warranty? This happened to my current Macbook and it was very cheap because I was able to snap new chips in but everything is soldered on the new Macbooks and I don't want to buy a computer that I might be throwing away in 2 years.
The same questrion applies in regard to the CPU. If it fails, is this going to be a huge repair bill?
Another major concern regards complaints from dissapointed customers who are unhappy with the glare of the screen. As I have eye problems, this could be a big issue for me.
Finally, but less of a problem, Its disappointing that you need to purchase an ethernet adaptor and have to buy an external CD/DVD drive. People look at me like I'm crazy when I talk about CD drives, but I listen to a lot of classical music which you cannot get on the net, and, even if you can, it is of low quality. You have to go to a store like Amoeba to find the CD. Not a huge deal, but a bit annoying and these little things add up.
I'm starting to think I may have to take a look at PC's, something, I never thought I'd do again.

I'd recommend 8 GB RAM, based upon all the information available today it should be sufficient for a very long time. OS X "Mavericks" uses system resources extremely efficiently and the MBP's flash memory goes a long way toward masking a paucity of RAM. Apple claimed that Mavericks' new memory compression algorithm results in an effective increase of 50% more memory than what is actually installed, a claim that I have empirically determined to be accurate, perhaps a bit conservative. In other words 8 GB memory will perform as if 12 GB were actually installed, if not for OS X's memory compression algorithm. Even 4 GB is sufficient for Mavericks whereas it was barely adequate for Mountain Lion.
If you were to ask an iPad or iPhone owner how much memory it has, and if they actually understood what you were asking, most would not know, or care. Nor should they. Such is the future of the Mac product line.
The same questrion applies in regard to the CPU. If it fails, is this going to be a huge repair bill?
It certainly will. Fortunately I have never heard of a single case in which a Mac's CPU has failed.
Another major concern regards complaints from dissapointed customers who are unhappy with the glare of the screen.
All you can do is try it for yourself. Matte screens have disadvantages too. If you don't like your MBP, return it for a full refund, no questions asked. You have 14 days to decide.
Classical music used to been a challenge to find on iTunes, but Apple has been getting better. You can still buy an external CD drive to import your music; they're not terribly expensive.
Any computer design is a study in compromises and an optical drive simply isn't worth the tradeoffs. People howled about Apple's decision to eliminate floppy disk drives too, even as they were ridiculed for originally promoting the 3 1/2" floppy disk format. What Apple creates, Apple destroys, lest someone else do it for them.
In any event optical discs are antiquated and obsolete, so get used to the idea.
I'm starting to think I may have to take a look at PC's, something, I never thought I'd do again.
Choice is good. Knock yourself out.

Regarding the exchange rate used in shopping cart

Hi,
Iam facing one problem regarding the currency conversion while crerating the shopping cart. The basic currency in my organizational profile is CHF. But I have a requirement to create a shopping cart in NZD(New Zealand dollars). After entering all the details and click on Shop, Iam going back to the home page and the error Iam getting is " Error during currency translation from NZD to CHF". I have checked for some other currencies like EURO, AUD etc and for all these currencies Iam not getting any error and the value gets converted to CHF with some exchange rate.
I want to know which table the system looks at for getting the exchange rate and why this error is coming only for NZD to CHF?
I checked some standard tables like TCURR and TCURX.
Any feed back will be very much appreciated.
Thanks and regards,
Ramachandra DN

Hi,
I am also facing this same issue.... Currency conversion is working fine for other currencies except for GBP to IDR.
Is it some config issue or wht as the functional guys have checked every thing.. they have maintained the exhange rate and etc...
we tried runing the report BBP_GET_EXRATE also butit says No records found.
Please help.
Thanks,
Vaibhav Goel.
Edited by: Vaibhav goel on Sep 3, 2010 12:09 PM

Where can I download the InDesign tutorial files ?

I have watched some of the tutorials from https://helpx.adobe.com/creative-cloud/learn/tutorials/indesign.html. The first tutorial "
How to make a brochure with InDesign (17 min)" did contain downloadable files with which the tutorial was very helpful.
Now I have continued with "Essential tasks", but I cannot find the files they refer to in the tutorial videos. They seem to presume I have downloaded the files from somewhere (eg. at one point they talk about "Chapter 6").
Any help would be highly appreciated.

Hi David ,
you stated the chapter is missing , is it not downloading or is it not there ? like is it mentioned in the contents and is not there in the book.
i checked the preview i know it says "chapter 11 table" but does it say the same in the contents you received ?
Regards
J

Convert date 17-sep-2007 to 2007-09-17 format

Is it possible to convert date say 17-sep-2007 to YYYY-MM-DD format?
if so is there any Function module to implement this?
Awaiting for ur reply....................

Hello,
try this
REPORT ZTEST.
DATA : V_DATE LIKE SY-DATUM,
V_DATE1(10).
V_DATE = '01012007'.
CONCATENATE V_DATE4(4) V_DATE2(2) V_DATE+0(2) INTO V_DATE1.
WRITE : V_DATE1.
Reward if helpful,
Regards,
LIJO

The manufacture name in iMac (early 2007) hard drive?

Can some one tell me what manufacture the hard drive in iMac (early 2007)is?

Welcome to Apple Discussions.
It will vary from machine to machine, Apple uses different vendors for hard drives. How you can find out what your machine has is open System Profiler and click Serial-ATA on the left. It will then tell you the model HD you have. By copying and pasting that info into Google you can easily find out information about the drive.
If you are looking to replace the drive any 3.5" SATA drive will work. One vendor that is helpful for replacing HD's is OWC. Their internal HD page is:
http://eshop.macsales.com/shop/hard-drives/3.5-SerialATA/
Regards,
Roger

Peculiar peoblem regarding the Material Price Change Posting MR21

Dear Experts,
I have got a peculiar peoblem regarding the Material Price Change Posting.
The transaction Used is MR21.
When the document was posted then the system has generated 2 Accounting documents one in Fiscal Yr 2007 and the other in 2008.
In 2007 document posting date 31.03.2008 the a/c entry was RM Inventory A/c Debit to Consumption A/c Credit. This entry is ok . But the system has simultainously generated another document with posting date 01.04.08 and here the document has the reverse entry ..... RM Inventory A/c Credit to Consumption A/c Debit.
Both the document was generated against a single Price Change Document. Both of then (A/c Docs) have the same number.
I am unable to find any justification or any solution to this issue .....
This issue has a high priority as ma client has to prepair their quaterly Balance Sheet.
So Please help me out ..... save me.......
Thnx
Sankha

Hi,
Go to SPRO > MM > Valuation and Account Assignment > Configure Price Change in Previous Period/Previous Year > here check whether "Price carr.over" field is active for your Company Code.
It has following implications;
Price change: carried over from previous to current period: - Indicates whether price changes in the previous period or previous year are to affect the prices in the current period.
Use: - When you select this field, the price change is also valid for the current period.
If you do not select this field, the price changes in the previous period or previous year have no effect on the prices in the current period.
Note: - Please note that if you select this field, thus changing the price for the current period, it is not possible to reverse this change later.

How can I select a radio button in a table regarding the data in the cells?

Hi everyone
This is the issue: I need to select the RadioButton which is in a table with data related to transfers in the cells next to it, so I need to select the correct radio regarding the data next to it.
This is the whole process: First I go to the Add Recurring Transfer section and select the parameters of the transfer (Accounts, date, amount, months etc), then with VB code I capture those parameters from the page and store them into Global variables for further usage on my E-tester script.
Right after that I need to select the radiobutton regarding the data of the transfer that I already created in order to delete it or modify it (Please see Attachment selectradio1.jpg)
So How can I move along the table and compare each cell with the variables that I created with the transfer information, so when I finish comparing a row cell by cell and if all the comparison match well in that row, I could select the radiobutton of the row.
Note: Second Attachment selectradio2.jpg shows the source code of the table...If you need more info please let me know
Could you please help me with this problem?? I'm Kind of frustrated with this issue jejeje

Here is an example. I uploaded mock html so that you can actually try this code. I think this does exactly what you are asking.
Private Sub RSWVBAPage_afterPlay()
Dim tbl As HTMLTable
Dim tblRow As HTMLTableRow
Dim tblCell As HTMLTableCell
Dim strValue As String
Dim rButton As HTMLInputElement
' ******** This would be your global variable. I put this so that values are seperated by a semicolin you can use what ever format works for you.
strValue = "03/22/2008;03/22/2008;*************1977;*************1977;$25.25;Jan, Jun, Jul, Dec"
' Strip out the ; for inner text comparison
strValue = Replace(strValue, ";", "")
' This will get the table but can be modifoed to be more specific
Set tbl = RSWApp.om.FindElement(, "TABLE")
' This loops through all the rows in the table until a match to the strValue is found
' then clicks the radio button. Findelements allows you to specify a root element
' once the correct root row is found, FindElemets can get the correct radio button
For Each tblRow In tbl.rows
  If tblRow.innerText = strValue Then
    Set rButton = RSWApp.om.FindElement("account", "INPUT", "NAME", , , tblRow)
     rButton.click
   End If
Next
End Sub
I also uploaded the script I created. You should be able to run it and see how it works.
This should get you going.

Payroll issue regarding the Claims - /561 and /563

Hi Payroll Experts,
I have a payroll issue regarding the Claims - /561 and /563 (October PY Run)
When i m runnning the Current month Payroll(October PY Run), Total Earning - total deductions are not matching with Net Pay. later i came to know that the system creates the WT /561 and deducts from the Net Pay.
But as per the Employee Payment Details , there is no recovery required from the employee for the past one year. But even then the system creates the WT /561. and deducts the same from NET Pay.
The followng are the WT details
IN - Period
OCT 2011
     /101 Total gross amount     118,897.00
     /110 Net payments/deductions     76,070.00-
     /550 Statutory net pay     95343
     /551 Stat.net recalc.diff.     37,692.00-
     /552 Stat.net subs.adjustment      37,692.00-
     /559 Bank transfer                                                   34,317.00
     /560 Net pay     37,218.00
     /563 Claim from previous month     5,609.00
FOR Period
Sept- Oct
     /101 Total gross amount     49,213.00
     /110 Net payments/deductions      31,721.00-
     /550 Statutory net pay     41,529.00
     /551 Stat.net recalc.diff.     14,591.00
     /552 Stat.net subs.adjustment     23,101.00-
     /553 Recalc.diff.to last payr.     37,692.00
     /559 Bank transfer                                                   14,591.00
     /560 Net pay     14,591.00
     /561 Claim     5,609.00
I request some body to throw siome light on the same.

Hi Experts,
Thanks for everyone for replying to my query ,
I have a doubt that If you check the WTs /551 and /552 in the IN PRD, the negative sign is coming for both the WTs
Is it correct?
And also, Assume that there may be a master data changes like Bank details and other deduction Wts happened in the month of Aug and now i m going to run the payroll for the month of Nov,
some of the employees having differences in the Net Pay, Eventhough the employee is having sufficient balances.
So how do i handle this issue
IS ther any way to solve this differences?
Please Let me know how to solve this issue.
Thanks

I am new to macbook pro, what is the best tutorial video to watch

I am new to Macbook Pro, what is the best tutorial video to watch?

There are a lot of videos to watch if you are new to Mac. Apple has got a lot of tutorials and videos in their website > http://www.apple.com/support/macbasics They will help you use OS X.
Also, you can ask here. We will be glad to answer all your doubts about OS X and your MacBook Pro. Finally, welcome to the Mac

Regarding the report for vendor stock

Hello all,
This is regarding the Subcontracting scenario. We have requirement of transferring the stock of material to Vendor by using 311 Q as the tye child material is in the project stock. In
However the customer would like to have a report in which we can see the stock provided to vendor ' Vendorwise or PO wise" .
Kindly suggest the solution.
Thanks & regards,
Sudhir

Hi
The stock monitoring for SC stocks at vendor can be done uswing ME2O report.
If you want to see the total stocks available at vendor then use report MBLB

Regarding the internet breech as seen on the news. What advice is Apple giving to its computer, iPad, and phone users?

Regarding the internet breech as seen on the news. What advice is Apple giving to its computer, iPad, and phone users?

That does not affect any OS X client or iOS, and there is no action for you or Apple to take.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.

Regarding the JavaEE Tutorial 9.1 (sep. 2007) - problem...

Similar Messages

Maybe you are looking for