Regarding the JDeveloper isuue

HI All,
I am using the Jdeveloper 11g and af:document and inputDate and upload component.Sometimes my submit button is not calling the action method in my backing bean.I am not able to identify the issue.........Everything is right code side
public String sbmtBtn_action()
<h:commandButton id="sbmtBtn" value="#{msg.submit}"
styleClass="centered"
action="#{ceoMessagesBean.sbmtBtn_action}"/>
Please give me the solution.
Thanks

Hi;
Your question is not related wiht Download forum side, Please post your issue on related Forum side:
Forum Home » Developer Tools » JDeveloper and ADF
Regard
Helios

Similar Messages

How to configure the jdeveloper 11 with .dbc files?

hi, all
i am a new bie here. 4 jdeveloper 10, i can configure the .dbc files at project setting, while 4 jdeveloper 11, it's totally different. i can't find any place to configure it. How to configure the .dbc in jdeveloper 11?
Regards,
Chelsea

You cant use jdev 11g for OAF development..
You need to download the jdeveloper patch from metalink to develope OAF objects.
Refer this metalink note to find the correct version of jdeveloper that you need to download https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416708.1
--Prasanna

Problems with integracao of the JDeveloper with Software Configuration Management (S

1) Error with JDeveloper 9i and Software Configutarion Management (SCM)
I have a problem with the JDeveloper 9i integrated with the repositorio 6i (SCM). When I make checkout of a
source in java of the repositorio, after that I make the alteration and later I make checkin of this source,
some times occur an error of feed of checkin or occurs error of checkout in case that it obtains to
make checkin.
2) Error when I open one branch and later that the alteration was finished I want to finish this branch.
when beginning one branch to tabalhar and I make alterations in a source in java, and to the end I want to
finish this branch, appear a message informing that some source in state of checkout exists, but when I go to
verify in the stack of checkout, do not exist no source or to folder.
Somebody could help me?
In case that it has the solution or it passed for these experiences?

Hi Uwe :-)
We know, that we have to raise the parameter PROCESSES to solve our problem (for a while). But we want to solve and understand the problem once for all.
And we noticed, that the processes raise everytime, we open a web-page in the visual editor in the JDeveloper. And we want to know, if anyone knows why. Or should we have forgot to set any parameter. Maybe its a bug of the JDeveloper version, we are unsing.
I just have found the error, that occurs in JDev.
Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler foundMaybe this is helpfully? :-/
Regards
Majo
Edited by: DerMajo on 09.11.2009 07:49

How to use schemas in MDS with the JDeveloper JAXB compiler ?

Hello,
I would like to use the JAXB2 compiler to generate a content model from an XSD in MDS. I don't find any way to do it because in order to select the source schema I only can browse my project and application directory but not the MDS. I configured JDeveloper such that to connect to MDS and I'm able to browse the MDS, to open artifacts. But I cannot extract/export/download them from MDS to the JDeveloper project such that to use the JAXB compiler against it. I tried the Add to project function once that the artifact is opned but nothing seems to happen. How could I do that ?
Many thanks in advance,
Nicolas

hi Henrique Pinto!
but you'll need to import all the wsdl's,,,
this mean that i will have to request another wsdl which is general wsdl contained object and operation and soap action?
or i can use only this wsdl and then need to do something in external definition with this wsdl?
thanks & regards
dennis
Message was edited by:
ogawa Dennis

IMPORTANT MESSAGE: THIS FORUM HAS MOVED TO THE JDEVELOPER FORUM

THIS IS AN IMPORTANT NOTE FROM THE JDEVELOPER ADF UIX DEVELOPMENT TEAM
With the release of JDeveloper 10g and Oracle ADF (ADF UIX, ADF Business Components, ADF JClient) we are consolidating our resources to one forum - the JDeveloper forum. All current posts/threads within this forum will, in time, be moved over to the JDeveloper forum. Meanwhile you should post all new questions to the JDeveloper forum, since this forum from now on will not be monitored by the JDeveloper ADF UIX development team. The JDeveloper ADF UIX development team will focus on answering UIX questions on the JDeveloper and ADF.
Regards,
JDeveloper Product Management
[Edited by: jjacobi on Nov 21, 2003 5:32 PM]

Do you have an add-on called Adblocker Plus in your Add-on Manager?
'Tools' > 'Add-ons' or '3bar menu icon' > 'Add-ons'
Disable this addon and test. It has been known to cause some issues.

How to turn of auto commit for the jdeveloper worksheet?

Hi,
is it possible to turn off the auto commit for the jdeveloper worksheet?
thx, alex

Hi Alex,
No, this functionality is not available, there are some existing Enhancement Request which request this functionality.
Regards,
Lisa Sherriff
JDev QA

Clarity On Use of EJB: For the Jdeveloper Product team

Hi,
I want to deploy a three tier application with EJB(both Session
and Entity Beans) on OAS 4.0 and Stored Procedures in Oracle 8i.
But I fear the following issues
i) Support for Entity EJBs
ii) Issue of JDBC over the firewall to acess the stored
procedures.IS JDBC 2.0 a part of the Jdeveloper 2.0
regards
Arvinder
null

Dear Brijesh,
This indicator will determine the component how it should get produced either individually or collectively
Example
Fert 1 - strategy 20, requirement for this fert Via sales order is 10
Fert 2 - strategy 40 requirement for this fert Via sales order/demand management is 10
ROH is used in both Ferts and mainatined in BOM and also set to indicator 2 ( Colletive ) in MMR
ROH requiement for fert 1 -1 ( BOM )
ROH requiement for fert 2 -1 ( BOM )
after MRP system will create only 1 PR for total qty 20
If ROH is set to 1 ( individually ) then
after MRP system will create 2 PR's as 10 each
Hope it answers your query
Regards
Madhu

Getting warning while trying to start the Jdeveloper for first time

Hi ,
Every day i am facing this problem while trying to start the Jdeveloper first time, and not able to start till some time.
i am getting the below exception...
Unable to create an instance of the java virtual Machine Located at path
E:\Oracle\Middleware\jdk160_24\jre\bin\client\jvm.dll
Please can i have the solution to this..
Regards,
Rajesh

user,
better you remove the contact number. dont leave those things in forums,
some one may misuse that.
nice, you can search over forums.
Jdeveloper installation issue
https://cn.forums.oracle.com/forums/thread.jspa?messageID=9665899
http://adfhowto.blogspot.in/2011/09/troubleshooting-unable-t-o-create.html
https://kr.forums.oracle.com/forums/thread.jspa?threadID=1070230
unable to create an instance of the Java Virtual Machine Located at path:
http://pisceansheart.wordpress.com/2009/08/06/solution-to-unable-to-create-an-instance-of-the-java-virtual-machine-for-jdeveloper/

The JDeveloper for Solaris platform /Linux platform

Hi,
could you tell me where I can get the JDeveloper for Linux /Solaris platform?
Thanks in advance,

Hi Claudio,
The best two pieces of information would be:
How do I Use a National Instruments License File on an OS Other Than Windows?
Using a Volume License File on a FLEXlm server
I am sure combination of the above two will provide you will the answers. But please feel free to post any further questions you might have.
Regards,
Rajiv Garg

Need inputs regarding the dvd drive on primary ide channel.

Specs:
Motherboard: MSI P35 Neo3 (MS-7935 1.0)
CPU: Intel Core2 Duo E6550
Memory: Team Elite DDR2800 (2x1GB Dual Channel)
Hard drive: Seagate Barracuda 7200.11 500GB 32MB Cache (SATA)
Optical drive: LG GSA-H55L (IDE only) Firmware version 1.02
Graphics card: Gecube HD3870
Chipset: Intel P35/G33/G31 (Rev. A2)
Southbridge: Intel 82801IB (ICH9)
LPCIO: Fintek F71882F
BIOS: AMI V1.1 (11/07/2007)
Hello,
Almost all new motherboards today only have a primary ide channel and the rest are SATA.
I need inputs regarding the dvd drive which is shown in device manager as located on the primary ide channel while the hard drive is located on the secondary channel. Because I would like to update the dvd drive to the latest firmware (version 1.06; to be able to recognize more blank media) but the LG site recommends that the drive (dvd) be located on the secondary ide channel.
I already tried to uninstall every channel from the device manager but all would still be the same after reboot, dvd drive on primary, hard drive on secondary.
Current ide mode in BIOS is set to AHCI+IDE mode, DMA modes are fine (UDMA4 for dvd, UDMA5 for hard drive), boot sequence (1st=HD, 2nd=DVD, 3rd=Floppy drive)
Tried switching to IDE mode only in BIOS but would not detect the optical drive. Never tried RAID+IDE mode since I only have a single hard drive.
I'm not sure but if I try to update the firmware, it might instead try to update the hard drive's firmware instead of the optical drive and make the hard drive unusable.
I would like to know if anybody with this same situation was able to successfully update the optical drive's firmware or is there some way to place the optical drive on the secondary ide channel and the hard drive on primary for me to follow and replicate the process.
Thank you for any replies.

Thanks sir NovJoe for the reply.
Just received the solution from another forum where I posted the same problem.
They said that the flash program for the firmware will detect the drive on its own and would not flash other devices except the optical drive itself. So its pretty safe, and I can confirm this since I just flashed my ODD a little over a while ago and everything went fine. No errors.
Though I'm speaking for the brand of ODD I own and may be different for other brands so take precautions as well. It may be different for the others.

How can I select a radio button in a table regarding the data in the cells?

Hi everyone
This is the issue: I need to select the RadioButton which is in a table with data related to transfers in the cells next to it, so I need to select the correct radio regarding the data next to it.
This is the whole process: First I go to the Add Recurring Transfer section and select the parameters of the transfer (Accounts, date, amount, months etc), then with VB code I capture those parameters from the page and store them into Global variables for further usage on my E-tester script.
Right after that I need to select the radiobutton regarding the data of the transfer that I already created in order to delete it or modify it (Please see Attachment selectradio1.jpg)
So How can I move along the table and compare each cell with the variables that I created with the transfer information, so when I finish comparing a row cell by cell and if all the comparison match well in that row, I could select the radiobutton of the row.
Note: Second Attachment selectradio2.jpg shows the source code of the table...If you need more info please let me know
Could you please help me with this problem?? I'm Kind of frustrated with this issue jejeje

Here is an example. I uploaded mock html so that you can actually try this code. I think this does exactly what you are asking.
Private Sub RSWVBAPage_afterPlay()
Dim tbl As HTMLTable
Dim tblRow As HTMLTableRow
Dim tblCell As HTMLTableCell
Dim strValue As String
Dim rButton As HTMLInputElement
' ******** This would be your global variable. I put this so that values are seperated by a semicolin you can use what ever format works for you.
strValue = "03/22/2008;03/22/2008;*************1977;*************1977;$25.25;Jan, Jun, Jul, Dec"
' Strip out the ; for inner text comparison
strValue = Replace(strValue, ";", "")
' This will get the table but can be modifoed to be more specific
Set tbl = RSWApp.om.FindElement(, "TABLE")
' This loops through all the rows in the table until a match to the strValue is found
' then clicks the radio button. Findelements allows you to specify a root element
' once the correct root row is found, FindElemets can get the correct radio button
For Each tblRow In tbl.rows
  If tblRow.innerText = strValue Then
    Set rButton = RSWApp.om.FindElement("account", "INPUT", "NAME", , , tblRow)
     rButton.click
   End If
Next
End Sub
I also uploaded the script I created. You should be able to run it and see how it works.
This should get you going.

Payroll issue regarding the Claims - /561 and /563

Hi Payroll Experts,
I have a payroll issue regarding the Claims - /561 and /563 (October PY Run)
When i m runnning the Current month Payroll(October PY Run), Total Earning - total deductions are not matching with Net Pay. later i came to know that the system creates the WT /561 and deducts from the Net Pay.
But as per the Employee Payment Details , there is no recovery required from the employee for the past one year. But even then the system creates the WT /561. and deducts the same from NET Pay.
The followng are the WT details
IN - Period
OCT 2011
     /101 Total gross amount     118,897.00
     /110 Net payments/deductions     76,070.00-
     /550 Statutory net pay     95343
     /551 Stat.net recalc.diff.     37,692.00-
     /552 Stat.net subs.adjustment      37,692.00-
     /559 Bank transfer                                                   34,317.00
     /560 Net pay     37,218.00
     /563 Claim from previous month     5,609.00
FOR Period
Sept- Oct
     /101 Total gross amount     49,213.00
     /110 Net payments/deductions      31,721.00-
     /550 Statutory net pay     41,529.00
     /551 Stat.net recalc.diff.     14,591.00
     /552 Stat.net subs.adjustment     23,101.00-
     /553 Recalc.diff.to last payr.     37,692.00
     /559 Bank transfer                                                   14,591.00
     /560 Net pay     14,591.00
     /561 Claim     5,609.00
I request some body to throw siome light on the same.

Hi Experts,
Thanks for everyone for replying to my query ,
I have a doubt that If you check the WTs /551 and /552 in the IN PRD, the negative sign is coming for both the WTs
Is it correct?
And also, Assume that there may be a master data changes like Bank details and other deduction Wts happened in the month of Aug and now i m going to run the payroll for the month of Nov,
some of the employees having differences in the Net Pay, Eventhough the employee is having sufficient balances.
So how do i handle this issue
IS ther any way to solve this differences?
Please Let me know how to solve this issue.
Thanks

Regarding the report for vendor stock

Hello all,
This is regarding the Subcontracting scenario. We have requirement of transferring the stock of material to Vendor by using 311 Q as the tye child material is in the project stock. In
However the customer would like to have a report in which we can see the stock provided to vendor ' Vendorwise or PO wise" .
Kindly suggest the solution.
Thanks & regards,
Sudhir

Hi
The stock monitoring for SC stocks at vendor can be done uswing ME2O report.
If you want to see the total stocks available at vendor then use report MBLB

Regarding the internet breech as seen on the news. What advice is Apple giving to its computer, iPad, and phone users?

Regarding the internet breech as seen on the news. What advice is Apple giving to its computer, iPad, and phone users?

That does not affect any OS X client or iOS, and there is no action for you or Apple to take.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.

Regarding the Belkin Audio Splitter (3.5mm-M/2x3.5mm-F). Are both sides of this splitter simultaneously bidirectional?

Regarding the Belkin Audio Splitter (3.5mm-M/2x3.5mm-F). Are both sides of this splitter simultaneously bidirectional?

Direct connections are always best, but if you insist:
Get a Griffin iTrip or replace your radio with one that has AUX inputs and/or Bluetooth.

Regarding the JDeveloper isuue

Similar Messages

Maybe you are looking for