Regarding the STO between the storage location

Dear Gurus,
I am trying to do the STO scenario for the Raw material. I have not activated the sales view for the raw material. I am doing the NL i.e. replenishment delivery without billing. The system is not able to determine the shipping data for the material.
I am creating the same document UB with the finished product/ semi finished product then the shipping data is determined without any error.
Is it always necessary to create the sales data for the raw materials also in order to use the STO functionality?
I am aware of the setting for the shipping point assignement specific to the s

Hi Gaurav,
Yes it is necessary to maintain the sales view for the particular material for achieving a successful STO, given the fact that an outbound delivery is created by the supplying plant, which requires a shipping point, which can't be done without the sales data (loading group and transportation group).

Similar Messages

Unable to create delivery for STO between different stroage locations

Hi,
i created PO for STO between differen storage locations belonging to the same plant.
At the time creating PO iam getting warning message " Of material RM-999999, only 0 KG are available on desired
date". what could be the reason?
when iam doing vl10b, PO is displaying but when iam selecting the PO line and clicking on the background button it is not generating any delivery document number and it is not showing any errors?
can any one help on this.

Hi Praveen,
While executing VL10B, you are actually planning to create outbound delivery for STO PO.
The STO PO will be due for delivery on that date and hence PO is displayed in the transaction.
The error message specified by you means on the due date of delivery, there is no material quantity exists at supplying storage location. This could be because no quantity exists in storage location or there could be some reservations available for available quantity or some other quantity is booked under some other outbound delivery document on or before that date.
Check for stock on posting date via t-code MB5B and proceed accordingly.
Hope this resolves your problem.
-Ravi

MD04 - Display the stock on one storage location particulary.

The transaction MD04 allows seeing the stock of the plant in the first line of the Stock/requirement list.(MD04)
When the plant includes several storage location (e.g MAG1, MAG2, MAG3), we don't have the detail of the quantity one each storage location.
We can use the filter (by using SETTINGS and FILTER ON) that controls the display of the MRP list and the stock/requirements list but this function don't allows seeing only the stock on one storage location particulary. We have to go the tcode MMBE in order to know the stock on each storage location.
Thanks in advance for yours reply.

What is your real problem?
Display the stock storage location-wise is one thing and do MRP without certain storage location(s) (=exclude storage locations from MRP) might be another.
If you only want to display stock of certain storage locations in MD04 but use all you stock for planning, I think there's no reason for it.
If you really want to exclude certain storage locations, then you have to be aware that MRP won't consider that stock (for the plant segment). It will also have impact on ATP (atp won't use that stock too).
So, there's a big difference between exclude a storage location from MRP and to exclude its stock from display.
(You can exclude storage locations from MRP via material master --> MRP4 view --> you have to enter both plant/sloc as organisational level and you will see the suitable tab. It is also possible to control this indicator via config for to be created material masters - you can search and find threads)
You should describe your exact requirement and maybe forum mebers can give you advice.

Mandatory the Material Quantity and Storage Location Field in Order

Hi Expert,
Please advise. how can i set the Maintenance order,
If Material field is Filled
Then Mandatory the Quantity Field and Storage Location Field.
Thank You
Best Regards

Hello,
Please Use Below User Exits to get your Functionality
IWO10009 --->PM Order Check for 'Save' Event
CNEX0026--->general inspection of material
Regards,
Rakesh

To stock transfer the RM to Production storage Location

Dear All,
I want to stock transfer the RM from Store to production storage location after that I have to pick the material against Production Order from Production Storage Location.
How I can carry out this scenario.
I am trying through Pull list.
please give ur valuable inputs.
Thanks in advance
Vijay Mankar.

Hi Vijay,
To tranfer the stock from store to Prod storage location , u can do in two ways,
1.Pull list - By accesing the Pullist with the production order .if there is no enough stock to meet production qty at production storage location , system calculate the missing part and asks replenishment storage location. here u have to give your store as repl.storage location
2. Enter tranfer posting.( MB1B) - using this u can tranfer the stock dierctly from the store to prodution storage location. u have to use 311 Mvt type and define Rec storage location is store.
3. Enter good issue MB1A - u can pick the raw material with reference to your prodution order using 261 Movement Type.
please reward if it helps
regards
pradeep

Split the Delivery based on Storage location

HI all,
How to Split the Delivery based on Storage location when creating delivery. is there any functional setting ?
Thanks
Krupali

Hi KR and Lakshmipathi,
I am having exactly the same requirement. My requirement is that i need to split one Sale Order line into multiple line items in delivery based on the stock in a particular storage location at the time of delivery creation.
Eg.
Line item 10 in Sale order for quantity 100.
Storage location stock in the priority
ST01 = 40
ST02 = 25
ST03 = 2000
I wish to have 3 line items in delivery like
Line item           Storage Location             Qty
10                     ST01                                40
20                     ST02                                25
30                     ST03                                35
I was able to do the same in the BADI LE_SHP_DELIVERY_PROC ~ SAVE_DOCUMENT_PREPARE
But i am facing problems regarding the inconsistency in delivery document such as Picking status update etc
Suggest if there is any better method to do.
Thanks in advance.

Stock transfer order between two storage locations in IS Retail

Hi,
I want to have a Stock transfer order between two storage locations in the plant.
I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
I am trying to have the shipping data in customizing for set stock transfer - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
Tnx
Lior

Hola.
Voy a contestar tu pregunta en espanol. Debes crear al centro emisor como deudor en la transaccion WB02 y ampliar a la organizacion de compra.
Posterior, debes crear al centro receptor como acreedor en la transaccion wb02.
Cesar Moreno. Funcional MM Retail.

Stock Transfer between 2 Storage locations

Dear All
I want to configure Stock Transfer between 2 Storage locations.
I have activated the same in configuration but can anybody provoide complete details at to how the process happens.Is there any standard document type to be used like UB in case of stock tranasfer between plants,do we craete SD Delivery etc.
Regards
Vaibhav Mahajan
Edited by: Csaba Szommer on Aug 22, 2011 12:56 PM

Hi
Stock Transfer between 2 Storage locations,there is no seperate configuration needed( like stock transport order b/w plants doc type UB), just goto MIGO
There are 2 options are there for Stock Transfer between 2 Storage locations
1. one step procedure movement type 311(from unrestricted to unrestricted)
323(from quality to quality)
325(from blocked to blocked)
2. Two step procedure movement type 313 and 315(only possible from unrestricted to unrestricted stock)
During this transfer no accounting document will generate because you are transferrring the stock within the plant,
Thanks

Transfer project/ SO stock between 2 storage locations of same plant

HI,
We have a requirement in which the we have to transfer project/sales order stock between 2 storage locations of the same plant.

Transfer between storage location.
   311 Q - Project Stock
   311 E - Sales Order Stock
Transfer between storage location to own stock
   411 Q - Project stock to own
   411 E - Sales Order to own

What is the difference between the T.codes MC.B and MC44 ?

Hi Guys
What is the difference between the T.codes MC.B and MC44 ?
and
What is the meaning of "Key figure" ?
cheers
MaruthiRam

Dear,
MC.B - Mat.Anal.Selection; Turnover - Executing material tunrover basing the different selection parameters available.
MC44 - Analysis of Inventory Turnover - The key figure "inventory turnover" specifies how often average stock has been consumed. Inventory turnover is calculated as the ratio of cumulative usage to average stock level.
An inventory turnover analysis allows you to identify whether there are any "slow-moving items". It provides a basis for evaluating, for example, how effectively fixed capital has been used.
Key figure: The key figures that you can evaluate in the standard analyses for stock placement/removal and material placement/removal, provide information from the point of view of a storage area, and distinguish between internal and external warehouse movements. Both of these standard analyses are based on data that is updated to the information structure S090 when the events goods movement (external quantities), or stock removals/placements and transfer orders occur. The only difference between these analyses is the predefined standard drilldown path.
Regards,
Syed Hussain.

What'z the difference between the Commercial Invoices and

What'z the difference between the Commercial Invoices and
Invoices/Excise Invoices? Also I understand that we can combine 2~3
invoices and can create one commercial invoice? If it is possible, how
to create the same?
cheers
shalsa007....

Hello,
A commercial invoice is a bill for the goods from the seller to the buyer. Commercial invoices are utilized by customs officials to determine the value of the goods in order to assess customs duties and taxes.
In general there is no standard form for a commercial invoice although they tend to contain many of the following features:
     seller's contact information
     buyer's contact information
     consignee's contact information (if it is different from the buyers)
     invoice date
     a unique invoice number
     sales terms (usually in incoterm format)
     payment terms
     currency of sale
     full quantities and description of merchandise (Generally this includes unit price and total price. Product descriptions should be consistent with the buyer's purchase order. Including the Harmonized System commodity codes can be helpful, especially in countries that are WTO members.)
Excise invoice Original for Buyer copy, whether prices are inclusive or exclusive of excise duty.
The invoice in which the Excise duties are included.
As per Indian tax system, Excise duty (16%) is payable by each manufacturing unit on the value of manufactured goods / on the value added. The manufacturing plant is supposed to submit an excise duty report on fortnightly / monthly basis. Various registers (RG1, RG23A, RG23C, PLA) are maintained for that purpose, which record all the transactions including movement of goods, cenvat credit available and cash balance available.
In SAP, we use transaction j1id for configuration and j1iin, j2i7, j1i5, j2i5, j2i6, j1ip for creating, extracting and printing excise invoice.
*Please reward if this helps**
Regards
AK

How to create a table with the spaces between the row..

Hello,
I am using jdev 11.1.1.6 and I need to insert the spaces between the rows. How this can be done?
Thanks and Regards,
Tarun Agrawal

Hi Tarun,
This css rule is useful to set the padding on each cell:
.AFTableCellPadding:alias {
padding: 10px 0px 10px 0px;
}But if you want to insert a real space between the rows (property "cellspacing") you can do something like this:
af|table > div + div > table {
border-collapse: separate;
border-spacing: 0px 5px;
}AP

Email links out of Practice Fusion are not active (as they are in IE), which they say is a problem with "something lost in the communication between the Flash engine and the browser". Does anyone have experience with this?

This is a medical records system, cloud based. I use Firefox to get into the system, but any browser would work. Other than this problem, Firefox works fine (better than IE, in my opinion).
Patient demographics include their email, which is hyperlinked and should go right to Outlook (my default email program). This works in IE, but nothing happens on the click when using Firefox as the browser.
I queried Practice Fusion, which replied: In regards to your previous question about the email hyperlink in the patient information, it looks this is not something that can be fixed on our end right now. It is the web browsers' responsibility to handle these types of links, and there seems to be something lost in the communication between the Flash engine and the browser. I apologize for any inconvenience.
Thanks for any help anyone can provide.

See if this helps you:
http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

In which table the link between the R/3 vendor and SRM vendor no are found?

Hi experts,
Can anay one tell me in which table exactly where we can find the relation between the R/3 vendors who are replicated to SRM and material groups which are replicated to SRM.
I just want to know th backend number and the frontend Number of the above two
please help me.
Regards,
Sairam.

Hi Sai,
All the replicated material groups from back end R/3 can be seen using COMM_HIERARCHY transaction as categories.
You can choose category as the search criteria and then click start tab to view all the replicated material groups.
In the VENMAP table you can see all the replicated vendors from back end along with their logical systems from which they were replciated.
Using PPOSV_BBP transaction you can see all the replicated vendors in your Vendor Group along with the vendor code and Business partner number.
Hope this resolves your query. Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

How is the interface between the Java Stack and ABAP stack is achieved?

How is the interface between the Java Stack and ABAP stack is achieved?..Please send me the answer to [email protected]

Hi,
By interface, I assume you mean the connection between the ABAP and the Java stacks in a double stack system.
The connection from Java to ABAP is through JCo connections defined in the WebDynpro section of the J2EE start page. So Java to ABAP requests are processed through JCo.
The connection from ABAP to Java is through RFC connections defined in TA SM59. The ABAP to Java requests are processed through RFC.
Refer https://dsd.esco-salt.com/StartPage/documents/integration/3.html for detailed explanation.
The UME can be maintained in either ABAP or in JAVA depending on the persistence.
Refer: http://help.sap.com/saphelp_nw70/helpdata/en/5b/5d2706ebc04e4d98036f2e1dcfd47d/frameset.htm
Check UME data source configuration.
Some quick FAQs can be found at:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad47eb90-0201-0010-7cb2-ddfa5ed879ec
Hope this helps.
Best Regards,
Srividya.R

Regarding the STO between the storage location

Similar Messages

Maybe you are looking for