Regarding Time Lapes in CS5
I have a few questions that I hope can be answered here. The first is: When starting a new Sequence what do you choose if you are making a time lapes? I don't see anything that lends it self to it. I've just been choosing DSRL 720p24 and it seems to work. Another problem I'vee been having is how do you lock all your images together if you want to move them? Like for instace if you don't want it centered? I did one of the sea but the sea is cut off on the bottom, I selected all and moved the frame down but only moves the one frame I am on. Finally, what about encoding? If I want to encode it as a quicktime file what are the settings?
I did a bunch of timelapse testing with a Canon 1DmkIV this summer when making this home movie: http://www.vimeo.com/14647401
This is my workflow:
Record each timelapse sequence to it's own folder on the card in-camera.
Open the first image of the sequence in Adobe RAW using Bridge. Apply any colour correction/image manipulation in RAW as well as cropping the image to the ASPECT (not resolution) that I want to work on (in my case 16:9).
In Bridge, right click the image you've manipulated, copy the RAW settings and then apply them to the rest of the images in the sequence (all these changes are non destructive, it's all just been metadata up until now). At this point I archive the original files to BluRay ROM so the new metadata is archived along with the image.
Once the settings are applied, drag the files to EXPORT TO DISK in Bridge and set the resolution for export (in my case 1920x1080) with maximum quality.
Last step is to open Quicktime Pro, open the image sequence and save it as a QT movie. At this point you set your frame rate (in my case 23.976). From this point I drop the QT's into a Premiere bin.
It is possible to open a series of still photos in Premiere as sequencial images and skip the Quicktime step but my RAID starts chugging when I do this (5 disk, RAID-0 that plays back 4K R3D and 220Mb/s HD MXF's without a problem). For $20 it was worth the upgrade to QT Pro and the extra step saves a lot of grief later.
This is just my workflow, not the bible on how to do it. Hope it helps.
Similar Messages
-
How do I save a photo sequence (time lap) in HD 1080p?
I made a time lap in iMovie and then brought the project to final cut x for fine tuning.
after that, I can't find a way to render my movie at 1080p res even when I choose AppleProRes format.
In iMovie it's easy, i just need to choose export as 1080p HD movie and done!
What Shell I do?
Thanks for the help!FCP X is not iMovie. FCP X assumes your Timeline is the resolution you plan to output. It seems your Project is smaller than 1080, which means output to 1080 will cause you to lose resolution and look bad. Use Compressor to up-rez footage. You'll still lose resolution, but you'll lose less resolution.
-
I have a run time error in CS5. Not the trial version !
I desinstalled and reinstalled Photoshop and the error ist still here.
The application did work fine for a couple of days and suddenly the error appeared.
Other applications like Lightroom work fine.
I am running on Windows 7 64 bits. The 32 bit CS5 application has the same run-time error.
What should I do ?
Thanks for help.Look in Windows 7 event viewer for the runtime hit. The error will be listed there in more detail.
Also you can run the troubleshooting software built in windows 7.
You can also run the windows 7 system file checker in a elevated command prompt. Type in sfc /scannow and let it run. 99.9 percent of the time the command will find the error and fix it. -
Dots on screen instread of time laps bar
I've had my ipod namo for 5 months now and it has worked fine. I turned on my ipod the other day and i notesed that the volume bar or the time laps bar was not showing. Instead only 5 hollow white dots apear. I can still adjust the volume and track scroll but i cant see the levels or time. Anyone have any suggestions or the same problem? Thanks so much.
Powerbook G4 Mac OS X (10.3.9)The five dots is the rating screen. You should be able to use the center button to scroll through the various screens. However, there is a known issue with the latest updater 1.1 that causes the screen to get stuck on ratings.
Click here for more info. -
Some question regarding time evaluation
Hello,
I have two questions regarding time evaluation:
1. Is it possible (if yes, how) to still include a employee in time evaluation even if this employee is inactive (status P0000-STAT2 = 0). We need this in order to calculate weeks of not working (this has to be calculated). I know that for payroll this is possible wih a setting in infotype 0003.
2. Is it possible (and how) to read data back from payroll into time. For example in payroll you export something to ZL table, can you then pick this up in time evaluation schema, as there is also ZL table. Or is there another way to do this?
Thanks for you answers,
Liesbethhi Schrage
Why you want to evaluate the time for inactive person.
If you want you can do.
Process :
First of all you have to group your employees. and sub groups.( for inactive emp)
Assign the employee sub group grouping for PCR in Basic Pay ( IMG ).
Then come to Time Evaluation Schema. Put the Day grouping nn nn nn nn in the Parameters. and run the time evaluation. You will get the output in DZL table.
For the above process you need to configure the T510S table.
Yes you can read the payroll into time.
the same concept will run in both of the modules.
the output should appear in the ZL table only.
Here the concept is.....Some companies, they will not use the payroll wage types. only they will use the time wage types.. these wage types has to be configure in the T510S. and we have to do the wage type copying from the part of time management only if they are not using the payroll. So either in Payroll or in Time management the evaluation of time willbe the same.
Cheers
Vijai -
I have 24 hours of footage outside a window with a beautiful view. i want to time laps this into about 2 and half minutes, can this be done with FCE4?????
Yes...
place into time line and adjust speed of clip...i would have thought!!
Any ideas?
Justin... Durban.. South Africa -
videos on my imac that played before do not play now, what happened, time laps on videos are all set to zero!
I am up to date with u/d and dont think it has anything to do with iphone. these videos worked on my mac plenty of time but now they dont! the time laps for remaining times for videos are all set to zero.
-
Question - Downloading Time for contribute CS5 for Mac
Yes, I followed the steps in email to download Contribute CS5 for Mac.
It has been 1 hour. How much time does it take. I have not typed in lisence key yet
Thank youIt depends on the speed of your Internet connection. The download is only the first phase you will still need to install the software. During the installation process you will be prompted to enter your license key/serial number.
-
Regarding Time management in HR
Hi Experts,
I am new to HR-Abap, Can any body give brief idea about time management in hr in Techincal point of view .
Thanks and regards,
Sravanthi.Hi
In time related infotypes records are multiple for a single pernr
say for example LEAVES
within a time for PERNR you will find different types of leaves
go and see the infotypes data practically PA2001 and PA2005, r etc
see the sample report on time related data
REPORT zh_absence_quota
NO STANDARD PAGE HEADING
MESSAGE-ID zh_msg
LINE-SIZE 169
LINE-COUNT 60(1).
T A B L E S D E C L A R A T I O N S
TABLES: pernr, " Logical PNP
t001p, " Personnel Subarea
t529u, " Employment Status
t500p, " Personnel Area
t501, " Employee Group
t503k, " Employee Subgroup
t549a, " Payroll Area
t554s, " Absence Type
t554t, " Absence Type Texts
t556a, " Quota Type
t527x, " Orgn. Unit
t556b, " Quota Type Text
pa0003. " Payroll Status
INFOTYPES:
0000, " Actions
0001, " Organizational Assignment
2006, " Absence Quota
2001. " Absences
T Y P E S D E C L A R A T I O N S
Employee Absence Structure
TYPES: BEGIN OF s_2001,
pernr TYPE persno, " Personal Number
awart TYPE awart, " Absence Type
subty TYPE subty, " Sub Type
endda TYPE endda, " End date
begda TYPE begda, " Begin date
abrtg TYPE abrtg, " Absence days
ename TYPE emnam, " employee Name
atext TYPE abwtxt, " Absence Type Text
END OF s_2001.
Employee Absence Quota Structure
TYPES: BEGIN OF s_2006,
pernr TYPE persno, " Personal Number
ktart TYPE abwko, " Absence Quota Type
year(4) TYPE n, " Year
subty TYPE subty, " Sub Type
endda TYPE endda, " End date
begda TYPE begda, " Begin date
anzhl TYPE ptm_quonum, " Absence Entitlement days
ename TYPE emnam, " employee Name
ktext TYPE kotxt, " Absence Type Text
kverb TYPE kverb, " Deduction Quota days
anzhb TYPE ptm_quonum, " Balance days
END OF s_2006.
Combined Employee Absence and Quota Structure
TYPES: BEGIN OF s_rep,
pernr TYPE persno, " Personal Number
ktart TYPE abwko, " Absence Quota Type
year(4) TYPE n, " Year
anzhl TYPE ptm_quonum, " Absence Entitlement days
kverb TYPE kverb, " Deduction Quota days
anzhb TYPE ptm_quonum, " Balance days
ktext TYPE kotxt, " Quota Type Text
awart TYPE awart, " Absence Type
abrtg TYPE abrtg, " Absence days
ename TYPE emnam, " employee Name
atext TYPE abwtxt, " Absence Type Text
endda TYPE endda, " End date
begda TYPE begda, " Begin date
END OF s_rep.
Declaration of Variables
DATA : gv_atext TYPE abwtxt, " Absence Type Text
gv_ktext TYPE kotxt, " Absence Type Text
gv_title1 TYPE sylisel, " Report title
gv_year(4) TYPE c, " Year
gv_mon(2) TYPE c, " Month
gv_hrs TYPE abwtg, " Hours
gv_date TYPE sydatum, " Date
gv_date1 TYPE sydatum, " Date
gv_dial. " Color flag
Declaration of Constants
CONSTANTS :
c_x TYPE c VALUE 'X', " Sign
c_1 TYPE persg VALUE '1', " Emp Group
c_pernr(8) TYPE n VALUE '00000000', " Pernr
c_moabw TYPE moabw VALUE '01', " Per SA Grouping
c_mozko TYPE mozko VALUE '01', " Per SA Grouping
c_mopgk TYPE mopgk VALUE '1', " Emp SGrp Grouping
c_endda TYPE sydatum VALUE '99991231', " End Date
c_val1(2) TYPE c VALUE '31', " Date Type
c_val2(2) TYPE c VALUE '12', " Date Type
c_val LIKE p0041-dar01 VALUE '01', " Date Type
c_date1 LIKE sy-datum VALUE '18000101'. " Date
I N T E R N A L T A B L E S D E C L A R A T I O N S
DATA: i_2001 TYPE STANDARD TABLE OF s_2001 WITH HEADER LINE,
i_2006 TYPE STANDARD TABLE OF s_2006 WITH HEADER LINE,
i_rep1 TYPE STANDARD TABLE OF s_2006 WITH HEADER LINE,
i_rep TYPE STANDARD TABLE OF s_rep WITH HEADER LINE.
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_ktart FOR t556a-ktart, " Absence Quota Type
s_awart FOR t554s-subty. " Absence Type
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-003. " Quota & Absence
PARAMETERS: p_qa RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-004. " Quota
PARAMETERS: p_q RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-005. " Absence
PARAMETERS: p_a RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.SELECTION-SCREEN END OF BLOCK b2.
I N I T I A L I Z A T I O N *
INITIALIZATION.
A T S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_screen.
S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Selection of Period
PERFORM get_period.
Get PERNR from LDB
GET pernr.
IF p0000-stat2 <> '0'.
Get the data from PA0001,PA2001, PA2006
PERFORM get_pers_data.
ENDIF.
T O P - O F - P A G E *
TOP-OF-PAGE.
Header of the List
PERFORM header.
E N D - O F - P A G E *
Footer
END-OF-PAGE.
IF p_qa = c_x.
Display both Absence and Quota Data
WRITE /1(188) sy-uline.
ELSEIF p_q = c_x.
Display only Quota Data
WRITE /1(114) sy-uline.
ELSEIF p_a = c_x.
Display only Absence Data
WRITE /1(125) sy-uline.
ENDIF.
E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
Combine the Absence and Quota Data
PERFORM append_data.
IF p_qa = c_x.
Display both Absence and Quota Data
PERFORM display_qa_data.
ELSEIF p_q = c_x.
Display only Quota Data
PERFORM display_q_data.
ELSEIF p_a = c_x.
Display only Absence Data
PERFORM display_a_data.
ENDIF.
*& Form validate_screen
Validation of Selection Screen fields
FORM validate_screen .
Validation of Personnel Number
CLEAR pa0003.
IF NOT pnppernr[] IS INITIAL.
SELECT pernr
FROM pa0003 UP TO 1 ROWS
INTO pa0003-pernr
WHERE pernr IN pnppernr.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Personnel Number'(006).
ENDIF.
ENDIF.
Validation of Employee Status
CLEAR t529u.
IF NOT pnpstat2[] IS INITIAL.
SELECT SINGLE statv
INTO t529u-statv
FROM t529u
WHERE statv IN pnpstat2 AND
statn = '2' AND
sprsl = sy-langu.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Invalid Employee Status'(007).
ENDIF.
ENDIF.
Validation of Personnel Area
CLEAR t500p.
IF NOT pnpwerks[] IS INITIAL.
SELECT persa
FROM t500p UP TO 1 ROWS
INTO t500p-persa
WHERE persa IN pnpwerks.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Personnel Area'(008).
ENDIF.
ENDIF.
Validation of Personnel Sub Area
CLEAR t001p.
IF NOT pnpbtrtl[] IS INITIAL.
SELECT btrtl
FROM t001p UP TO 1 ROWS
INTO t001p-btrtl
WHERE btrtl IN pnpbtrtl.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Personnel Sub Area'(009).
ENDIF.
ENDIF.
Validation of Employee Group
CLEAR t501.
IF NOT pnppersg[] IS INITIAL.
SELECT persg
FROM t501 UP TO 1 ROWS
INTO t501-persg
WHERE persg IN pnppersg.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Group'(010).
ENDIF.
ENDIF.
Validation of Employee Sub Group
CLEAR t503k.
IF NOT pnppersk[] IS INITIAL.
SELECT persk
FROM t503k UP TO 1 ROWS
INTO t503k-persk
WHERE persk IN pnppersk.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Sub Group'(011).
ENDIF.
ENDIF.
Validation of Payroll Area
CLEAR t549a.
IF NOT pnpabkrs[] IS INITIAL.
SELECT abkrs
FROM t549a UP TO 1 ROWS
INTO t549a-abkrs
WHERE abkrs IN pnpabkrs.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Payroll Area'(026).
ENDIF.
ENDIF.
Validation of Absence Type
CLEAR t554s.
IF NOT s_awart[] IS INITIAL.
SELECT subty
FROM t554s UP TO 1 ROWS
INTO t554s-subty
WHERE subty IN s_awart AND
moabw EQ c_moabw AND
endda EQ c_endda.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Absence Type'(012).
ENDIF.
ENDIF.
Validation of Absence Quota Type
CLEAR t556a.
IF NOT s_ktart[] IS INITIAL.
SELECT ktart
FROM t556a UP TO 1 ROWS
INTO t556a-ktart
WHERE ktart IN s_ktart AND
mopgk EQ c_mopgk AND
mozko EQ c_mozko AND
endda EQ c_endda.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Quota Type'(013).
ENDIF.
ENDIF.
ENDFORM. "validate_screen
*& Form get_period
Get the Correct Period based on Selection screen selection
FORM get_period.
CLEAR: gv_year,gv_mon, gv_date, gv_date1.
gv_year = sy-datum+0(4).
gv_mon = sy-datum+4(2).
IF pnptimr1 = c_x. " Current Date
pnpbegda = sy-datum.
pnpendda = sy-datum.
ELSEIF pnptimr2 = c_x. " Current Month
CONCATENATE gv_year gv_mon c_val INTO gv_date.
CONCATENATE gv_year gv_mon c_val1 INTO gv_date1.
pnpbegda = gv_date.
pnpendda = gv_date1.
ELSEIF pnptimr3 = c_x. " Current Year
CONCATENATE gv_year c_val c_val INTO gv_date.
CONCATENATE gv_year c_val2 c_val1 INTO gv_date1.
pnpbegda = gv_date.
pnpendda = gv_date1.
ELSEIF pnptimr4 = c_x. " Upto Today
pnpbegda = c_date1.
pnpendda = sy-datum.
ELSEIF pnptimr5 = c_x. " From Today
pnpbegda = sy-datum.
pnpendda = c_endda.
ELSE.
IF ( pnpbegda IS INITIAL AND pnpendda IS INITIAL ).
pnpbegda = c_date1.
pnpendda = c_endda.
ELSEIF pnpbegda IS INITIAL AND NOT pnpendda IS INITIAL.
pnpbegda = c_date1.
pnpendda = pnpendda.
ELSEIF NOT ( pnpbegda IS INITIAL AND pnpendda IS INITIAL ).
pnpbegda = pnpbegda.
pnpendda = pnpendda.
ENDIF.
ENDIF.
ENDFORM. "get_period
*& Form get_pers_data
Get the Absence and Quota Data from PA0001,PA2001,PA2006
FORM get_pers_data.
DATA: lv_year1(4) TYPE n,
lv_year2(4) TYPE n,
lv_date1 TYPE sydatum,
lv_date2 TYPE sydatum,
lv_anzhb TYPE ptm_quonum. " Last Year Balance days
Get data from Respective Infotypes
rp_provide_from_last p0001 space pnpbegda pnpendda.
Absence Data
LOOP AT p2001 WHERE pernr = pernr-pernr AND
begda GE pnpbegda AND
endda LE pnpendda.
IF p2001-awart IN s_awart.
i_2001-pernr = pernr-pernr.
i_2001-subty = p2001-subty.
i_2001-awart = p2001-awart.
i_2001-abrtg = p2001-abrtg.
i_2001-begda = p2001-begda.
i_2001-endda = p2001-endda.
READ TABLE p0001 WITH KEY pernr = p2001-pernr.
i_2001-ename = p0001-ename.
Get the Absence Type Text
CLEAR gv_atext.
SELECT SINGLE atext INTO gv_atext FROM t554t
WHERE sprsl = sy-langu AND
moabw = c_moabw AND
awart = p2001-awart.
IF sy-subrc = 0.
i_2001-atext = gv_atext.
ENDIF.
APPEND i_2001.
CLEAR i_2001.
ENDIF.
ENDLOOP.
Quota Data
LOOP AT p2006 WHERE pernr = pernr-pernr AND
begda GE pnpbegda AND
endda LE pnpendda.
IF p2006-ktart IN s_ktart.
i_2006-pernr = pernr-pernr.
i_2006-subty = p2006-subty.
i_2006-begda = p2006-begda.
i_2006-endda = p2006-endda.
i_2006-year = p2006-endda+0(4).
i_2006-ktart = p2006-ktart.
i_2006-anzhl = p2006-anzhl.
i_2006-kverb = p2006-kverb.
i_2006-anzhb = p2006-anzhl - p2006-kverb.
READ TABLE p0001 WITH KEY pernr = p2001-pernr.
i_2006-ename = p0001-ename.
Get the Quota Type Text
CLEAR gv_ktext.
SELECT SINGLE ktext INTO gv_ktext FROM t556b
WHERE sprsl = sy-langu AND
mopgk = c_mopgk AND
mozko = c_mozko AND
ktart = p2006-ktart.
IF sy-subrc = 0.
i_2006-ktext = gv_ktext.
ENDIF.
APPEND i_2006.
CLEAR i_2006.
ENDIF.
ENDLOOP.
For Vacation Quota (80) get the Balance of the Last Year and
add to the Current Year Quota
LOOP AT i_2006.
IF i_2006-ktart = '80'.
lv_year1 = i_2006-endda+0(4).
lv_year2 = lv_year1 - 1.
CONCATENATE lv_year2 '01' '01' INTO lv_date1.
CONCATENATE lv_year2 '12' '31' INTO lv_date2.
LOOP AT p2006 WHERE pernr = i_2006-pernr AND
begda GE lv_date1 AND
endda LE lv_date2 AND
ktart = '80'.
lv_anzhb = p2006-anzhl - p2006-kverb.
i_rep1-pernr = i_2006-pernr.
i_rep1-ktext = i_2006-ktext.
i_rep1-anzhl = p2006-anzhl.
i_rep1-kverb = p2006-kverb.
i_rep1-ename = i_2006-ename.
i_rep1-begda = p2006-begda.
i_rep1-endda = p2006-endda.
i_rep1-anzhb = lv_anzhb.
i_rep1-ktart = '80'.
i_rep1-year = lv_year2.
APPEND i_rep1.
CLEAR: i_rep1.
ENDLOOP.
ENDIF.
CLEAR: lv_year1, lv_year2,
lv_date1, lv_date2,lv_anzhb.
ENDLOOP.
SORT i_rep1 BY pernr ktart.
ENDFORM. "get_pers_data
*& Form append_data
Put the Absence and Quota Data into one Report Int Table
FORM append_data.
CLEAR: i_rep.
REFRESH: i_rep.
SORT i_2001 BY pernr awart.
SORT i_2006 BY pernr ktart year.
Move I_REP1 data into i_2006
LOOP AT i_rep1.
MOVE-CORRESPONDING i_rep1 TO i_2006.
APPEND i_2006.
CLEAR i_2006.
ENDLOOP.
Move the Absence and Quota Data into a final Int Table
LOOP AT i_2006.
i_rep-pernr = i_2006-pernr.
i_rep-ename = i_2006-ename.
i_rep-ktart = i_2006-ktart.
i_rep-anzhl = i_2006-anzhl.
i_rep-kverb = i_2006-kverb.
i_rep-ktext = i_2006-ktext.
i_rep-anzhb = i_2006-anzhb.
i_rep-year = i_2006-year.
CLEAR i_2001.
CASE i_2006-ktart.
WHEN '81'.
PERFORM get_2001 USING i_2006-pernr '1000' i_2006-year.
WHEN '50'.
PERFORM get_2001 USING i_2006-pernr '1002' i_2006-year.
WHEN '80'.
PERFORM get_2001 USING i_2006-pernr '1001' i_2006-year.
WHEN '56'.
PERFORM get_2001 USING i_2006-pernr '1003' i_2006-year.
WHEN '51'.
PERFORM get_2001 USING i_2006-pernr '1004' i_2006-year.
WHEN '52'.
PERFORM get_2001 USING i_2006-pernr '1005' i_2006-year.
WHEN '54'.
PERFORM get_2001 USING i_2006-pernr '1006' i_2006-year.
WHEN '53'.
PERFORM get_2001 USING i_2006-pernr '1007' i_2006-year.
WHEN '55'.
PERFORM get_2001 USING i_2006-pernr '1008' i_2006-year.
WHEN '57'.
PERFORM get_2001 USING i_2006-pernr '1009' i_2006-year.
WHEN '90'.
PERFORM get_2001 USING i_2006-pernr '2000' i_2006-year.
WHEN '58'.
PERFORM get_2001 USING i_2006-pernr '2001' i_2006-year.
WHEN '59'.
PERFORM get_2001 USING i_2006-pernr '2002' i_2006-year.
WHEN '91'.
PERFORM get_2001 USING i_2006-pernr '2003' i_2006-year.
ENDCASE.
IF sy-subrc <> 0.
APPEND i_rep.
ENDIF.
CLEAR i_rep.
ENDLOOP.
SORT i_rep BY pernr ktart year.
DELETE i_rep WHERE pernr = ' '.
ENDFORM. " append_data
*& Form display_qa_data
Display the Absence and Quota Data
FORM display_qa_data.
DATA: lv_flag, " New Flag
lv_tot2 TYPE ptm_quonum. " Absence Balance days
IF i_rep[] IS INITIAL.
MESSAGE i000 WITH 'No Data found'(014).
ELSE.
LOOP AT i_rep.
toggle color
PERFORM toggle_color.
IF lv_flag <> space.
NEW-LINE.
ENDIF.
AT NEW pernr.
READ TABLE i_rep INDEX sy-tabix.
WRITE:/1 sy-vline,2(8) i_rep-pernr,
10 sy-vline,11(40) i_rep-ename.
ENDAT.
AT NEW ktart.
READ TABLE i_rep INDEX sy-tabix.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,52(25) i_rep-ktext.
ENDAT.
AT NEW year.
READ TABLE i_rep INDEX sy-tabix.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline, 78(4) i_rep-year,
82 sy-vline, 83(11) i_rep-anzhl,
94 sy-vline, 95(25) i_rep-atext,
120 sy-vline,133 sy-vline,
144 sy-vline,
155 sy-vline,156(13) i_rep-anzhb,
169 sy-vline.
lv_tot2 = lv_tot2 + i_rep-anzhb.
ENDAT.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline, 77 sy-vline,
82 sy-vline, 94 sy-vline,
120 sy-vline,121(12) i_rep-abrtg NO-ZERO,
133 sy-vline,134(10) i_rep-begda NO-ZERO,
144 sy-vline,145(10) i_rep-endda NO-ZERO,
155 sy-vline,169 sy-vline.
NEW-LINE.
AT END OF pernr.
WRITE : /1(169) sy-uline.
SUM.
FORMAT COLOR 3.
WRITE:/1 sy-vline, 10 sy-vline,
51 sy-vline, 77 sy-vline,
82 sy-vline, 94 sy-vline,
120 sy-vline,121(12) i_rep-abrtg,
133 sy-vline,144 sy-vline,
155 sy-vline, 156(13) lv_tot2,
169 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(169) sy-uline.
CLEAR lv_tot2.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " display_qa_data
*& Form display_q_data
Display only the Quota Data
FORM display_q_data.
DATA: lv_flag. " New Flag
SORT i_2006 BY pernr ktart year.
IF i_2006[] IS INITIAL.
MESSAGE i000 WITH 'No Data found'(014).
ELSE.
LOOP AT i_2006.
Toggle Color
PERFORM toggle_color.
IF lv_flag <> space.
NEW-LINE.
ENDIF.
AT NEW pernr.
READ TABLE i_2006 INDEX sy-tabix.
WRITE: /1 sy-vline, 2(8) i_2006-pernr,
10 sy-vline,11(40) i_2006-ename.
ENDAT.
AT NEW ktart.
READ TABLE i_2006 INDEX sy-tabix.
WRITE: 1 sy-vline,10 sy-vline,
51 sy-vline,52(25) i_2006-ktext.
ENDAT.
AT NEW year.
READ TABLE i_2006 INDEX sy-tabix.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline,78(4) i_2006-year,
82 sy-vline,83(11) i_2006-anzhl,
94 sy-vline,95(13) i_2006-anzhb,
108 sy-vline.
NEW-LINE.
ENDAT.
AT END OF pernr.
WRITE : /1(108) sy-uline.
SUM.
FORMAT COLOR 3.
WRITE: /1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline, 82 sy-vline,
94 sy-vline, 95(13) i_2006-anzhb,
108 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(108) sy-uline.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " display_q_data
*& Form display_a_data
Display Only the Absence Quota
FORM display_a_data.
DATA: lv_flag. " New Flag
SORT i_2001 BY pernr awart.
IF i_2001[] IS INITIAL.
MESSAGE i000 WITH 'No Data found'(014).
ELSE.
LOOP AT i_2001.
Toggle Color
PERFORM toggle_color.
IF lv_flag <> space.
NEW-LINE.
ENDIF.
AT NEW pernr.
READ TABLE i_2001 INDEX sy-tabix.
WRITE: /1 sy-vline, 2(10) i_2001-pernr,
10 sy-vline,11(40) i_2001-ename.
ENDAT.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,52(25) i_2001-atext,
77 sy-vline,78(12) i_2001-abrtg,
90 sy-vline,91(10) i_2001-begda,
101 sy-vline,102(10) i_2001-endda,
112 sy-vline.
NEW-LINE.
AT END OF pernr.
WRITE : /1(112) sy-uline.
SUM.
FORMAT COLOR 3.
WRITE: /1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline,78(12) i_2001-abrtg,
90 sy-vline,101 sy-vline,
112 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(112) sy-uline.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " display_a_data
*& Form header
Write the Report Header
FORM header .
data : lv_pers type pbtxt,
lv_orgn type orgtx.
gv_title1 = sy-title. " Set List Header
IF p_qa = c_x.
NEW-PAGE LINE-SIZE 193.
ELSEIF p_a = c_x.
NEW-PAGE LINE-SIZE 125.
ELSEIF p_q = c_x.
NEW-PAGE LINE-SIZE 119.
ENDIF.
Standard header
FORMAT RESET.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = gv_title1.
Get the Personal Area and Org.Unit Texts
clear : lv_pers,lv_orgn.
select single name1 into lv_pers
from t500p where persa = pnpwerks-low.
select single orgtx into lv_orgn
from t527x where sprsl = sy-langu and
orgeh = pnporgeh-low and
endda = c_endda.
if not lv_pers is initial.
write : /2 'Personal Area:'(017), 17(25) lv_pers color 7.
endif.
if not lv_orgn is initial.
write : /2 'Organization Unit:'(021), 20(25) lv_orgn color 3.
endif.
IF p_qa = c_x.
FORMAT COLOR COL_HEADING.
WRITE : /1(169) sy-uline.
WRITE:/1 sy-vline,2(8) 'Emp.No'(015) CENTERED,
10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
51 sy-vline,52(25) 'Quota Description'(018) CENTERED,
77 sy-vline,78(4) 'Year'(027),
82 sy-vline,83(11) 'Entitlement'(019),
94 sy-vline,95(25) 'Absence Description'(022) CENTERED,
120 sy-vline,121(12) 'Absence days'(023),
133 sy-vline,134(10) 'From Date'(024),
144 sy-vline,145(10) 'To Date'(025),
155 sy-vline,156(13) 'Quota Balance'(020),
169 sy-vline.
WRITE : /1(169) sy-uline.
ELSEIF p_q = c_x.
FORMAT COLOR COL_HEADING.
WRITE : /1(108) sy-uline.
WRITE:/1 sy-vline,2(8) 'Emp.No'(015) CENTERED,
10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
51 sy-vline,52(25) 'Quota Description'(018) CENTERED,
77 sy-vline,78(4) 'Year'(027),
82 sy-vline,83(11) 'Entitlement'(019),
94 sy-vline,95(13) 'Quota Balance'(020),
108 sy-vline.
WRITE : /1(108) sy-uline.
ELSEIF p_a = c_x.
FORMAT COLOR COL_HEADING.
WRITE : /1(112) sy-uline.
WRITE:/1 sy-vline,2(8) 'Emp.No'(015) CENTERED,
10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
51 sy-vline,52(25) 'Absence Description'(022) CENTERED,
77 sy-vline,78(12) 'Absence days'(023),
90 sy-vline,91(10) 'From Date'(024),
101 sy-vline,102(10) 'To Date'(025),
112 sy-vline.
WRITE : /1(112) sy-uline.
ENDIF.
ENDFORM. " header
*& Form toggle_color
This routine alters the color of the records in the list
FORM toggle_color.
IF gv_dial = space.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
gv_dial = c_x.
ELSE.
FORMAT COLOR 1 INTENSIFIED OFF.
CLEAR gv_dial.
ENDIF.
ENDFORM. " toggle_color
*& Form get_2001
Get the ABsence type for each Quota type
FORM get_2001 USING p_pernr TYPE persno
p_value TYPE awart
p_year.
LOOP AT i_2001 WHERE pernr = p_pernr AND
awart = p_value AND
endda+0(4) = p_year.
i_rep-awart = i_2001-awart.
i_rep-abrtg = i_2001-abrtg.
i_rep-atext = i_2001-atext.
i_rep-begda = i_2001-begda.
i_rep-endda = i_2001-endda.
APPEND i_rep.
ENDLOOP.
ENDFORM. " get_2001
Regards
anji -
Active directory issue regarding time (DST) - Cant bind any Macs to 2000 AD
I am working with a new server at a small mostly Windows based school district. I am here to do a small AD/OD integration with nothing out of the normal. They are using Windows 2000 server and 10.4.11 with all the current software updates. I tested binding to their AD several months back and it ran without a hitch. Now, today when I attempted to bind their new Intel Xserve running 10.4.11 to their AD, it fails yielding the "Active directory only permits slight variations between the clocks..." error message.
I have seen this before and the message has always been very descriptive in describing the problem (time is off on one end or the other). The issue here is that the machines are all running within a second or two of each other. I verified this my self several times on all the AD servers, each mac client and the mac server. I also checked other normal pitfalls and could not find anything. I can reproduce this error on 10.4.11 server, 10.4.11 client and 10.5.2 client (my laptop) so its not any specific install of OS X, its something in AD.
Is there any chance that this has something to do with the recent changes to daylight savings time? The on-staff admin at the district manually moved the time ahead one hour on Monday morning to bring the windows system up to the current time. As I stated before, this district uses 2000 server. MS does not support 2000 any more and has not issued any updates regarding the recent daylight savings time changes. I have done a ton of searching and I have not been able to find any other mention of such an issue as I would assume that it would be rather wide spread.
Any help would be appreciated. Thanks!Hi
You can extend the time difference from the default 5 minutes to 10 minutes. This is done on the AD Server either using the GMM or the DMM. This might help with the issue you are seeing.
Failing that you could point the AD to an internet based time server along with everything else on the network OR make everything on the network use the AD as the time server.
Apologies if you have already tried this, Tony -
Doubts regarding Time Series Measures
Hi,
In my instance i have two calendars
1) Enterprise(or) Fiscal Calendar (Aug to July)
2) Gregorian Calendar (Jan to Dec).
So now my question is if we apply To Date function using Both Calendars how will it work.
For ex: If i create an Year To Date function using Gregorian Calendar then it will fetch results from Jan 1st to Till Date. And same if i used Enterprise Calendar then it will fetch results from Aug 1st to Till Date.
Is my above understanding correct. Correct me if am wrong any where.
And now i have one more requirement, My client wants to change the dates in the calendar i mean for Fiscal Calendar they dont want from (Aug to July) but From (Dec to Dec) is this possible, if so please clarify how and where..
Help is greatly appreciated.Raj,
For your requirement I wrote a procedure in which for the date '01-jan-2010' it converts to the financial year of '26-Dec-2009' and the same is updated inside your calendar_table in the column fis_dat based on which you can easily find your fiscal_year, month and so on. The same can be much simplified and i ll update if find time.... Check and revert me back.
Create or replace procedure fin_cal
as
begin
DECLARE
temp_date date;
fisc_date date;
temp_fisc_date date;
previous_date date;
pre_year int;
year_date int;
cursor c1 is select trunc(date_time) from dates1 where time_key >= 20100101 and time_key <= 20120101 order by trunc(date_time); // calculated from 1st jan 2010 -2012
begin
open c1;
loop
fetch c1 into temp_date;
exit when c1%notfound;
year_date:=to_number(to_char(to_date(temp_date,'dd-mm-yy'),'yyyy'));
pre_year:=year_date-1;
if to_char(temp_date,'dd')='01' and to_char(temp_date,'mm')='01' then
fisc_date:=to_date(pre_year||'12-24','YYYY-MM-DD'); // the initial date is 24-12-prioryear...
dbms_output.put_line(fisc_date);
update dates1 set fis_dat=fisc_date where trunc(date_time)= trunc(temp_date);//fis_dat is the column in the table
else
select fis_dat into previous_date from dates1 where trunc(date_time)=trunc(temp_date)-1;
temp_fisc_date:=TO_DATE(TO_CHAR(previous_date,'YYYY-MM-DD'),'YYYY-MM-DD') + 1;
update dates1 set fis_dat=temp_fisc_date where trunc(date_time)= trunc(temp_date);
temp_fisc_date:='';
end if;
end loop;
end;
end;
begin
fin_cal();
end;
Regards,
Anitha.B -
Saving time from encore CS5 to long
hi Folks,
the time to save a encore CS5 project is far to long, some time over 20 minutes for only few changes.
aswell I have a very poor performance when I use the text tool, by typing and moving objects occures a delay up to few seconds, unable to import and edit longer text passage in a reasonable time,
my workstation is preety fast (I got now problem for example with complex HD premiere or after effects projects)
any one knows if there are system settings in windows 7 what could cause this problem in encore CS5?
my system: windows 7, 64bit / intel(R) Core(TM) 2Quad CPU Q9550 2,9GHz / 8GB Ram / NVIDA GeForce GTX285 / raid system for harddrive seagate barracuda 2x1TB
thanks a lot...Yes, that seems slow. I don't know of any system tuning for Encore specifically.
Go to the PPBM5 benchmarks and see whether you have any weaknesses that might contribute. I found significant differences moving from 6Gig RAM to 12 to 24. But even with 6 I did not have the issues you're describing.
http://ppbm5.com/ -
I've been having a go at a few time lapse movies using Photoshop CS5 on the Mac.
I have kind of 2 linked queries:
1) The easy way to make a movie is to use file>open and choose a batch of photos while ticking Image Sequence. However this doesn't seem to offer the option to reverse the frames which is quite important.
2) The other way I found on the web is to use a stack. I'm not entirely clear what the benefits are this way although it does allow me to reverse.
However if I go to Document Settings and change the frame rate, it doesn't seem to affect the length of the movie, whereas method 1) does invite you to set the frame rate at startup and this affects the overall length of the movie.
Thanks in advance for any comments.Welcome to the forum.
When Still Images show as black, the first things that I investigate is the pixel x pixel dimensions of the images. With many Stills, even if they are within the allowed pixel x pixel range, one's computer's resources can be used up, and an alternate workflow might be useful - Scale the Images to match the Frame Size of the Sequence, prior to Import, in a program, like Photoshop. This ARTICLE might be helpful.
The second thought is that the video driver is no longer performing properly, and needs to be updated. What is make/model of your graphics card, and what is the current number/date of your installed video driver?
Good luck,
Hunt -
Project Analytics (PA) Specific Question regarding Time Dimensions
Hello PA experts, i am having a difficult time distinguishing between all date options we are presented in PA Answers.
I see GL Cal, Enterprise Cal, Project Cal and then i see additional Secondary Dates listed as Accrued / Released Date.
What i am looking for is something basic but not sure which is the right date.
I need the date when certain invoices were created / hours were entered into our PA system.
I have brought in all these dates to see which one makes sense but at this point, they all have various dates.
Any help is appreciated.
Regards,Probably the best way to work this out would be to refer to the OBIA 7.9.6 Data Lineage Worksheet available on metalink, which will show you which EBS date fields the OBIA Model Date columns refer to. I find this is a lot easier than viewing the mappings in Informatica,(although still go in there to confirm) It may be that you need to map this extra date column into the model if its not already there.
Regards,
Imran -
Regardding Time Events confirmation.
Hi PP Gurus,
Could anybody please pour light on Time Event confirmation configuration for Work center and Customization? Whenever I'm trying to do Time Event confirmation for Processing finish event getting following error:
Message no. RU407: Pair formation: Conflict with previous confirmation
Diagnosis
A time event with the record type B40 should be created. When checking whether this is permitted based on time events that already exist a time event with the record type R10 was found as the predecessor.
The record type B40 cannot be a successor to the record type R10.
If anybody came across the same please help.
Thanks & Regards,
Abu ArbabHi,
The sequence can be the exactly in the same way as you have mentioned.
For Set-up time:
First select the Set-up Start radio button.
Now if you have Set-up Interruption then select the " Interrrupt Setup" Button.
If you want to start the set-up again then select the " Set-up Start" again.It will auto-confirm the interruption finish when you use the radio button "Start setup".
Finally you have to select the radio-button " Set-up Finished" so that Set-up time is completed.
Now the same-way for Process Time.
"Please come back with proficient comments". Hope I'am proficient enough with the reply.
Best Regards.
Maybe you are looking for
-
I'm getting the following error message from my Time Machine for two days now: "The backup disk image "/Volumes/Backup Files/Burke iMac.sparsebundle" is already in use." I haven't changed anyting lately and can't find the problem...
-
Condtion based xml for each row of the table t-sql
Hello , i have below data. create table #students id int identity(1,1) primary key, student_id int not null, [s_m_cml] xml insert into #students student_id, [s_m_xml] values 101, '<submarks><submark><subject>Arts</subject><marks>85</marks></submark><
-
I have a book with two novellas in it (short stories) with a total of about 35 files. Each story has a cover page with the title which has a paratag called "HB_HeadingBook". I'd like the title of the novella to appear in the header of each page. So f
-
I've used Photoshop since 1994 and I've never seen this: when I open an existing file in PS4, it now opens at the tiniest possible display size, i.e., .148 percent. I have to go up to the transport bar and use the pull down menu to enlarge it to a
-
Dedctable Vat,vat on hold account,vat receivable account.
Hello Guru's Please tell me when we avail the vat credit.Is ther any FI entry made when the GR is posted. What is RM dedctable Vat,vat on hold account,vat receivable account. From Shikha