Regions display name number of characters

I would like to increase the number of characters currently available in the Region Display Name, currently I am limited to 40. How do I change the number of characters avaialble to me?

Hi,
Do you talk about Apex region?
If so , create hidden item Px_ITEM and set it value with your long region name.
Then use item on region title like &Px_ITEM.Br, Jari

Similar Messages

Is it possible to use NUMCHARS to display the number of characters in a block of text instead of the whole document? How?

Is it possible to use NUMCHARS to display the number of characters in a block of text instead of the whole document? How?

Getting the character count for a paragraph is trivial:
Sub NumChars1()
MsgBox Selection.Paragraphs(1).Range.Characters.Count
End Sub
Even outputting it to the document is trivial:
Sub NumChars2()
With Selection.Paragraphs(1)
.Range.InsertAfter .Range.Characters.Count
End With
End Sub
The real issue comes when you want to update the document. If the destination paragraph is only ever empty or contains the character count of the previous paragraph, you could use:
Sub NumChars3()
With Selection.Paragraphs(1)
.Next.Range.Text = .Range.Characters.Count & vbCr
End With
End Sub
Cheers
Paul Edstein
[MS MVP - Word]

Dynamically change CRS port display name / number

I have a script that performs a call consult transfer out to a shared DN. The calling number presents itself as the CRS port while it is ringing on the DN. If the call goes unanswered, the missed call shows the CRS port details.
What I'd like to do is present the calling number on the DN instead of the CRS port details. I can get the calling number from Get Call Contact Info, but not sure if there is a way to present it during call consult transfer.
Thanks for any help.

You can use the Call Redirect step to perform an unsupervised transfer; however, the action to take if the destination is busy or RNA would be up to the forwarding rules on it and not CCX.
You cannot modify the display information for an outbound call from within a script. That is set through AXL to UCM when the ports are created.
The only time you even have a shot at setting the display information is with the Place Call step. If you have a specific list of values that you wanted to show as (e.g. specific numbers of your company), you can create separate call control groups for each number and specify the CCG ID in the place call step. This will not work for you though because you can't bridge two separate contacts together, you must use the call redirect or call consult tranfer step.

What is the maximum number of characters in an Oracle 10G Instance Name

All,
Can I know what is the maximum number of characters in an oracle 10g instance name under AIX? Is it 7 characters or 8 characters?
regards
Santhosh

One should really make the difference between db_name and instance_name: if instance_name default value is db_name it can be different
(even on a non RAC database).
For example with Oracle 10.2.0.4 you can create a database named DB78 with instance_name=DB12345678:
$ uname -a
Linux lx01.localdomain 2.6.18-92.el5 #1 SMP Fri May 23 22:17:30 EDT 2008 i686 i686 i386 GNU/Linux
$ ps -fu oracle | grep smon
oracle    6353     1 0 20:30 ?        00:00:01 ora_smon_DB12345678
oracle    6412 5596 0 20:37 pts/1    00:00:00 grep smon
$ export ORACLE_SID=DB12345678
$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 8 20:34:26 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> show parameter name
NAME                                 TYPE        VALUE
db_file_name_convert                 string
db_name                              string      DB78
db_unique_name                       string      DB78
global_names                         boolean     FALSE
instance_name                        string      DB12345678
lock_name_space                      string
log_file_name_convert                string
service_names                        string      DB78I would not recommend this practice: but it's interesting to know to avoid confusing between db_name and instance_name.

When I receive text messages, it displays phone number instead of contact name.

I updated to iOS 5 on my iPhone 4 over the weekend. Since updating to iOS 5, all of my text messages show up with a phone number listed instead of the contacts name. I checked my contact info and all the contact information is listed and the numbers under the contact are correct. Has anyone else had this issue and if so have you discovered any resolutions?

Following a tip from another poster, I was able to fix the issue (temporarily).
This worked for me on Verizon.
I dialed *228 on my Verizon phone. I pressed "1" to activate it over the air. I then went into task manager and killed all the running apps.. Waited a few minutes.
The next text I got displayed the number correctly!.. Until I rebooted, that is.
Ps. PLEASE, call Apple and speak with a senior engineer on this. They can't fix it if they don't know it's a problem! (800) MY-IPHONE

HT5557 hello...my questions is related to objective C...Is it possible to display name of the person who is calling me whose number is saved in my local database but not in iphone contacts ?.

hello...my questions is related to objective C..
Is it possible to display name of the person who is calling me whose number is saved in my local database but not in iphone contacts ?.

ashish35,
No one from Apple here - we're just users like you. All I can tell you is that electronic fail and with MacBook Pros (and most notebooks) the components are so integrated as to make a repair to the logic board practically impossible, hence the high prices charged for repairs.
Only you can decide if you want to have your computer repaired or put the money towards the purchase of a new computer. If you do decide to purchase a new unit I would suggest that you also purchase the AppleCare Protection Plan which increases your warranty from one year to three years.
Sorry and good luck,
Clinton

Re number of characters in a file name with leopard.. 10.5.3

re number of characters in a file name with leopard.. 10.5.3
Is there a limit? in a file or directory name?

hfs+ == hfs extended, the default filesystem on a current mac...
http://en.wikipedia.org/wiki/HFS_Plus

Maximum number of characters for Host name..

Is there a limit to the number of characters for the host name of adobe lifecycle?
Is 15 characters to much?

What makes you believe that 32 characters is remotely necessary? As Ralph indicates, a shorter password is equally secure, in realistic terms. Keep in mind that even if some hacker set up a script to repeatedly try random passwords on your account, they're never going to get in because there are limits on the number of times one can enter an incorrect password before being blocked on any decent system. You can have a much shorter password, and as long as a human can't guess it from what is publicly known about you, it's secure.

COIO - Maximum number of characters that can be displayed

Does anybody know what the maximum number of characters is that can be displayed in COIO.

Transaction COISN does not exist
Message no. S#343
Unfrotunately I get the message that transactions doesn't exist.
I'm trying to add more fields that you can display on the screen, I need to try and know how many fields it can display from left to right
Thanks for trying to help

Need to set "Title", "Display Name" and "Name" fields to custom string property "RMA Number" for each instance of custom work item

Hi,
We have a custom Work Item we use to track RMA's. I've created a string property called RMA Number which is also used as a key.
RMAs do not have titles or any other identifying properties other than the unique RMA number (think incident number).
I was wondering what the best approach would be to set these other fields ("Title", "Display Name" and "Name") to the RMA Number value (RMAXXX), as I'm currently investigating using a powershell script via a workflow.
Thanks,
Pietro

Hi Marcel,
I've come up with the following:
# Load the SMlets module
Import-Module SMlets
# Get the RMA Class
$RMAClass = Get-SCSMObject -Class (Get-SCSMClass -Name MyWorkItem$)
foreach ($RMA in $RMAClass)
$RMANumber = $RMA.RMANumber
$RMA | Set-SCSMObject -PropertyHashtable @{"DisplayName" = $RMANumber; “Title” = $RMANumber; ”Description” = $RMANumber; }
Is it possible to make it aware of which RMA work item executed it, and only update that one? Updating all the records each time a new one is created will cause some problems in the future.
Thanks,
Pietro

How to limit the number of characters a label displays?

Can someone please tell me how I can limit the number of characters a label displays from the text property?

Ok. What I am trying to do is display a number with the format
x.yy
I need the display to show all characters all the time. For example let me show you what I currently get and what I require.
Current     Require
0               0.00
0.1            0.10
etc
To me its like the label is truncating the number appropriately and I dont want it to do that. I need a fixed 4 character format.
Hope this clears it up.

Hi Everyone, I am using iPhone5, my question in how to display name and contact number both stored for incoming and outgoing calls? If I have saved five different numbers with a same name, how do I recognise that from which number caller is calling?

Hi Everyone, I am using iPhone5, my question in how to display name and contact number both stored for incoming and outgoing calls? If I have saved five different numbers with a same name, how do I recognise that from which number caller is calling?

I have friends all over Europe, does it matter what number they use to call me? Nope! All incoming calls are free for me.
The only time you ever have to worry about which number is if you get charged for incoming domestic/international calls.
You can tag their number (work/home/iphone) and that may show on the CallerID accordingly.
It should show, John Doe
underneath, work/home/mobile
For example:
http://shawnblanc.net/images/img-0009-1.png

Coding - returning the number of characters in a text box.

I am in the process of creating a cell phone simulation/animation in Edge Animate CC for use in a Captivate course. Basically, when a user clicks on number buttons on the virtual keypad, it displays the numbers in a text box , just like an actual cell phone would display the phone number on the screen as a caller is dialing. So, the user would click seven buttons and a seven-digit phone number appears on the virtual phone screen. This part of my animation works great and all seven digits appear, but I would like to modify the code so that a hyphen appears after the third button clicked. This way, the output better resembles an actual phone number instead of just a string of seven digits.
Here is an example of the code I currently have assigned to the #2 button on the virtual keypad:
var text = sym.$("PhoneNum").html();
text = text + 2;
sym.$("PhoneNum").html(text);
PhoneNum is the name of my text box on the stage where the digits appear as each keypad button is clicked.
In order to incorporate the hyphen after the third button clicked, I need to somehow return the current number of characters in the PhoneNum text box, then create an if/else scenario that applies the hyphen after the third button clicked.
Does anyone know how I can use either JavaScript or jQuery to return the number of characters currently in the PhoneNum text box?

No problem!
Basically the thing to remember is that unless you are needing to pass html to the object, you can use text() instead. text() also gives you the raw text without any html formatting (so you can assume what .html() would return)

IP phone display name of the called party with grabage

Hi,
I am running CME with 12.4.14(t) ios. The problem which i am having is that when anyone dial any extension, the name is displayed of the called extension & some garbage charater are shown

Hi,
CSCsj18014 is:
Caller ID string received with extra characters
Symptoms: A caller ID may be received with extra characters.
Conditions: This symptom is observed when caller ID is enabled on both
routers and when the station ID and station name are configured on the FXS
side.
Workaround: There is no workaround.
The reference of FXS ports makes be believe that CSCsj18014 is not the applicable bug. However, in the same results page, we see another bug matching better a problem of garbage w/o FXS ports:
Garbage characters in called name displayed on calling phone
Symptom: Garbage characters in called name displayed on calling phone Conditions: When placing a call from one phone to another phone on CME using 12.4(11)T3, the displayed name on the calling phone gets some unidentified characters at the end of the displayed name after a few seconds have passed. The problem was NOT seen in 12.4(11)T2
Now, the bug toolkit does not give the number for this "related bug" and I was not able to localize it.

Tomcat web.xml "display-name" using flex.messaging.MessageBrokerServlet

       Hello,
When my web application starts with the BlazeDS servlet flex.messaging.MessageBrokerServlet defined in the web.xml we have an error because in the display-name defined at top level in web.xml we have some text containing character ':'. The error is traced to inside the function
         flex.management.BaseControl.getObjectName()
Which gets the object name, and this function calls
   BaseControl.getApplicationId()
which finally calls
ServletConfig.getServletContext().getServletContextName()
This will return or display-name from the web.xml with all it's text. This text contains among other characters the character ':'. We use this tag for the display in the Tomcat Manager to see version number and other of deployed project.
After retrieving this name it is appended in the getObjectName() function to a buffer, this StringBuffer that already contains flex.runtime. and now this name is appended (still with all that we are using for Tomcat Manager with ':' character and other). After the name, other things are appended. Our problem is that, after constructing this StringBuffer an instance of javax.management.ObjectName is created. In it's constructor it takes a String name as input. This String is parsed in base of characters ':', '*', '?', '\n' and so on, and since we have some of these characters in our display-name it all goes wrong.
   My question is, if this is a bug, a limitation or if it is documented that using flex.messaging.MessageBrokerServlet we can not use certain characters in the display-name of the web.xml?
   Greetings, Tim
   We are using
Tomcat 5.5.23
Jdk 1.5.0_14
blazeds-src-4.0.1.17657
part of web.xml
     <display-name>
         Version: 1.10.0.3 (01/02/2011), Environment development, AGP: 10.220.6.8:1557/AGPSVI, AGP_STAGE: host 10.220.6.8:1557/AGPSVI
     </display-name>
     <description>IMPRESA progetto con undergroung</description>
     <listener>
         <listener-class>flex.messaging.HttpFlexSession</listener-class>
     </listener>
     <servlet>
         <servlet-name>MessageBrokerServlet</servlet-name>
         <display-name>MessageBrokerServlet</display-name>
         <servlet-class>flex.messaging.MessageBrokerServlet</servlet-class>
         <init-param>
             <param-name>services.configuration.file</param-name>
             <param-value>/WEB-INF/flex/services-config.xml</param-value>
        </init-param>
         <load-on-startup>1</load-on-startup>
     </servlet>

I have found that this is a bug and there is an issue open at the "Adobe Bug and Issue Management System", BLZ-617. I don't know if work is in progress, but when that issue is closed the problem will be solved.
Greetings, Tim

Regions display name number of characters

Similar Messages

Maybe you are looking for