Register a person for I message

Is it possible to register a person for i-message who does not have a Apple product? Trying to send pictures
on the MacBook Pro, contact turns red when typed in. Can message on my I-Phone 5.

Hodgesheik wrote:
Is it possible to register a person for i-message who does not have a Apple product? Trying to send pictures
No.
iMessage is an Apple service that lets you send unlimited messages over an active Wi-Fi (or cellular data*) connection to other iOS devices using iOS 5 or later or Macs using OS X Mountain Lion or later.
http://support.apple.com/kb/ht3529

Similar Messages

  • The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location

    Could anyone please help in resolving the following
    error:
    Server Error in '/BizTalkXXXMyAppWcfService' Application.
    The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc".
    Please verify that the receive location exists.
    It does exist: When I go to All Artifacts >> Receive Locations I can see: WcfService_BizTalkXXXMyAppWcfService/XXXMyApp
    Also it is Enabled, green, up and running.
     …and that the isolated adapter runs under an account that has access to the BizTalk databases. – Checked, the BizTalkUser has all the permissions to access BizTalk databases.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Runtime.InteropServices.COMException: The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive
    location exists, and that the isolated adapter runs under an account that has access to the BizTalk databases.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. 
    Stack Trace:
    [COMException (0xc0c01666): The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive location exists, and that the isolated
    adapter runs under an account that has access to the BizTalk databases. ]
       Microsoft.BizTalk.TransportProxy.Interop.IBTTransportProxy.RegisterIsolatedReceiver(String url, IBTTransportConfig callback) +0
       Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +318
    [AdapterException: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc"; receive location does not exist or is disabled.]
       Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +875
       Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +363
       System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1423
       System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
       System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1132
    [ServiceActivationException: The service '/BizTalkXXXMyAppWcfService/XXXMyApp.svc' cannot be activated due to an exception during compilation.  The exception message is: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc";
    receive location does not exist or is disabled..]
       System.Runtime.AsyncResult.End(IAsyncResult result) +890624
       System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +180062
       System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107

    Hi,
    This seems  to be a permission issue.
    Makesure account used in the application pool is a member of the BizTalk Isolated Host Users group.
    Also its working considering either make the ASPNET user account a member of your BizTalk Isolated Host Users group to make sure it has access to the biztalk databases (or change the asp.net services to run under a different account, which would need
    to be done from the framework's core .config files)
    Regards
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

  • Can I register to Metalink for personal use.

    Hi All
    I need to install Dev. suite 10g R2 Patch, but i don't have access to Metalink.
    Can I register to Metalink for personal use? If not how to get System Identifier?
    Prompt answer will be really appreciated.
    with regards,
    MOHAMMED AJAZ.

    Can I register to Metalink for personal use? If not how to get System Identifier?
    hi
    u cant get into metalink as a free u have to buy account.
    sarah

  • The Messaging Engine failed to register the adapter for "WCF-BasicHttp"

    Hi,
    I have a strange problem with BizTalk 2013 on Windows 2012.
    It is with exposing an orchestration or schema as a web service, I always get the error "The Messaging Engine failed to register the adapter for 'WCF-BasicHttp' "
    This happens also am sure I did the followings:
    -Enabled the receive location
    -Have separate pool for each web service
    -The pool user is part of the Isolated Group & IIS_Users group
    -The user has access to BizTalk databases
    I tried the procedure on different environment, and it works just fine, what is causing this on this environment really I don't know!!
    Is there something I should do on the IIS?

    I just resolved it, the issue was with the server name exceeding 15 characters; which resulted in mismatch in credentials, since Windows will only take the first 15 characters.
    So, I shortened the server name to 15 characters, and everything now works fine.
    Thanks again,

  • On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". They are all registered. Help

    On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". Each device has been registered onto this account and this computer, and all have worked finely in the past. I am so confused as to why now seemingly without reason, none of our apple devices (one iPod, two iPhones) are allowed to have music and other material downloaded onto them. Also, as a side note, they still are charged by plugging them into the computer, however they do not even show up on the left-hand sidebar in iTunes.
    It should also be noted that for my iPhone it does not allow for the new update software to be uploaded; it just says that an error has occurred, nothing more.

    Try Here  >  AMDS  >  http://support.apple.com/kb/TS1567

  • Creation of Contact Person for a vendor in SUS, MM SUS scenario

    Hi All,
      We are working on EBP for bidding with SRM 5.0 and ECC6.0 as the backend. When we do BBPGETVD for the vendor root we have to create a contact person for the vendor to logon.
    Our clients requirement is that all the data in the R/3 has to come to EBP including the telephone number and email addresses so that the vendor number should be created as the contact persons userid.
    Is there any way to achieve this?
    Best regards,
    Sridhar.

    Hi,
    Also you dont need to enter any roles while creating the Contact person for a vendor.You just need to enter the employee/user details who will be the contact person for the vendor and after you save all the data ,the CP for the vendor will be created and the system will issue a message "Contact person XXXX for BP yyyyy created".
    BR,
    Disha.
    Do reward points for  useful answers.

  • Flex with JMS Topic/Queue for Asynchronous messaging

    I have been working on Flex and JMS integration using Data
    Services for Asynchronous messaging. I am able to do this
    successfuly. Now I am in need to do the same without using the Data
    Services piece.
    For doing this I have done the following ......
    I have created a JMS Webservice in the Oracle JDeveloper 10G
    along with Webservice Client.I am able to Listen to JMS Topic/Queue
    ( this has been created in the Oracle AS ) using this Webservice
    and receive the messages from this JMS Topic/Queue
    Asynchronously.....
    But If I need to use the Flex Client , I am not able to
    Communicate with this Webservice to listen to the JMS Topic/Queue.
    Did any one in this forum tried to communicate with JMS
    Topic/Queue without using Flex Data Service.If so please share your
    inputs.

    Here is my confusion (I'm using J2EESDK1.3).
    On a local server I did the following
    j2eeadmin -addJmsFactory jms/RemoteTCF topic -props url=corbaname:iiop:mars#mars
    In the app client running on the local server I had the code
    ic = new InitialContext();
    // JNDI lookup. The resource factory ref points to the
    // Remote Connection Factory I registered
    tcf = (TopicConnectionFactory)ic.lookup("java:comp/env/jms/TopicConnectionFactory");
    // The env ref points to jms/Topic of the local server
    pTopic = (Topic)ic.lookup("java:comp/env/jms/PTopic");
    So I'm assuming that I'm using a connection factory that connect to mars and a Topic on the local box.
    On remote server mars, I deployed a MDB which use
    jms/TopicConnectionFactory and jms/Topic. But I'm thinking this jms/Topic and the one I used on the local box are not the same one. Right? Then how could the app client and the MDB share messages?
    Some of my explanation I don't if it makes sense or not.
    ConnectionFactory is a way to tell what kind of connection it could generate (Queue, Topic, Durable etc) and Where the connection would go to (local or remote).'
    As for as destination, I'm not sure. How could two server share one Topic?

  • Create contact person for a Vendor

    Hi experts
    Someone could explaim the processes of contact person creation.
    I replicated the vendor from R/3 and now I need to send a BId to this vendor but the sistem ask for a contact person, so I tried go to transaction Manage business  Partner - Employ to Business Partner and tried to create a contact person for this vendor, but when I try to choose a roles for this user no roles is found and is not possible create the user.
    Where can I insert the roles to found when creating the user?
    Thanks
    Nilson

    Hi,
    Also you dont need to enter any roles while creating the Contact person for a vendor.You just need to enter the employee/user details who will be the contact person for the vendor and after you save all the data ,the CP for the vendor will be created and the system will issue a message "Contact person XXXX for BP yyyyy created".
    BR,
    Disha.
    Do reward points for  useful answers.

  • Reg:Table for Custom Messages and custom Messaege Classes

    Hi ,
    My requirement is to find out all custom messages . so can any one tell in which tables all custom messages and custom message classes are stored .
    Thanks & Regards,
    Lakshmi.

    hi,
    You can checkthese tables listed below,
      T100                             Messages
      T100A                            Message IDs for T100
      T100C                            Message Control by User
      T100O                            Assignment of message to object
      T100S                            Configurable system messages
      T100SA                           Application Areas for Configurable Messages
      T100T                            Table T100A text
      T100U                            Last person to change messages
      T100V                            Assignment of messages to tables/views
      T100W                            Assign Messages to Workflow
      T100X                            Error Messages: Supplements
      T100ARBGB                    Application Area
    But The main table for storing all the message classes and their numbers are stored in table
    T100

  • Hi I've got a I phone 5 c how can I put my number for I message instead ov email

    HI I have a I phone5 c how can I put number for I message instead of e mail

    It is there - at the bottom below the section - you can be reached by iMessage at.
    The iPhone's cell phone number is automatically registered with iMessage along with your Apple ID email address.

  • HT3529 how do you add another person to your messages if they dont have a number.

    how do you add another person to your messages if they dont have a number.

    Never mind, disregard.  I went in and reset my password to my AirPort Express, and for some reason, it then went through, and is all working and good.

  • Substitution functionality of OSS also needed for B1 messages

    Version:
    SAP Service Marketplace / SAP Business One Customer Portal as of today
    Description of Requirements:
    The substitution functionality of the OSS doesn’t apply for B1 messages so it is impossible to share work on the same OSS ticket with several people.
    It is necessary that a defined stand-in can share information with SAP on an OSS ticket opened by a colleague.
    Valid as of:
    This is not a legal requirement that is applicable at a distinct date, but it is currently a big problem to our daily business.
    It worked till some weeks ago then suddenly the functionality was gone. On reporting it as a bug to the OSS (ticket 254736 / 2008) we were told to raise a development request for something that had already been working before.
    Business Needs:
    We have a big installation with several systems and 200 out of planned 400 users are already live with B1. We are in an international rollout. We have several developers, application supporters, consultants and system administrators working exclusively on our B1 landscape. So we always have several OSS messages for B1 open at the same time, some of them in high priority.
    We work in shifts, and urgency as well as time delay when we get support from SAP Asia often requires that the person currently working on an OSS ticket is not the one who opened the message.
    Yet if we stand-in for each other, we cannot share information with SAP via OSS on messages a colleague reported in the first place, because the substitution functionality of the OSS doesn’t work.
    Sometimes just people get ill or are on vacation and it still has to be possible that the work is continued by a colleague. OSS makes this impossible for B1 messages.
    Examples:
    Case 1:
    Colleague A works the early shift, colleague B the late shift (both in Europe). B opens an OSS ticket for some problem and informs A about it. SAP support is transferred to India. India works in shifts according to European time slots so that would be fine except the fact that the time during the first shift is ‘lost’ because A can’t take over the OSS ticket from B – annoying in high priority cases. But then SAP development in China is drawn into the case. Time delay makes it necessary that a webex session is scheduled during the early shift. So A – prepared by B about the problem - will do the webex. Yet A can’t share information with SAP via the OSS ticket because he hasn’t opened it. They resort to direct e-mail and phone. The OSS ticket is missing crucial information. B as well as SAP India has to be informed separately.
    Case 2:
    Colleague A opens an OSS ticket. There is some activity going on but it takes weeks because the problem can’t be solved easily. Then A goes on (long before planned) vacation. Colleague B is there as a stand-in and prepared to take over daily business from A. Yet the OSS ticket can’t be worked on by B because the substitution functionality in OSS is missing. Work comes to a halt until A is back from holidays.
    Both examples are taken from real life! We experienced this during the last weeks.
    Things would get even worse if A opens a ticket and then gets really ill for a long time or leaves the company. Nobody could access his pending OSS tickets to continue the work.
    Current Workaround:
    In complex and / or very urgent cases there is direct contact with SAP not via the OSS, but then information can be lost easily in the process.
    Sometimes work comes to a halt.
    When a colleague is absent for longer a new OSS message about the same problem is opened so that somebody else can work on the problem. But then often another colleague from SAP gets assigned to the new ticket, not the one who had already worked on the problem before. This means additional work at SAP and ours’ because of the need to explain a known issue again to another person.
    Proposed Solution:
    Give us back the substitution functionality! It has worked before and is still working for our R/3 messages! Can’t be that big of a deal!

    ujjwal wrote:To shutdown/reboot from within slim, use "halt" or "reboot" as the username and enter the root password. And to enable the options in XFCE, add your user to the "power" group (gpasswd -a user power)
    Oh, now I rememeber to have read somewhere about those commands as username, but surely a chooser would be the better functionality.
    I think I'll remove Slim again, and just use the console login with .xinitrc to automatically start XFCE4, because there isn't really any difference (having bootsplash on vc1 can also be a nice thing), and it speeds up booting a little.

  • PS 50301 error - No Registered Index Version for Information Space

    Hi there,
    I'm facing an issue with the "SAP Explorer Information Space". When I try to open the Information Space, it opens fine but when its about to load, an error message appears.  "It is not possible to open Information Space. Can't load the Information Space Index. (PS 50301)"
    When I click "Show Details", it displays:
    "No registered index version for information space"
    I'm seeing this error message after updating BO 4.0 SP4 to BO 4.0 SP6.
    I did try to index the information space but it fails.
    So basically the question is why did this update from BO 4.0 SP4 to BO 4.0 SP6 impact the Explorer Information Space?
    Environment details:
    BO 4.0 SP6 on Windows 2008 Server using Oracle 10g as back-end.
    Front End: using Windows 7, Mozilla Firefox, Internet explorer.
    Error Message:
    Explorer Indexing Error after I tried to Index this:

    The way this was solved was, I created 4 new explorer services in CMC.
    1- Explorer Exploration Server
    2- Explorer Indexing Server
    3- Explorer Master Server
    4- Explorer Search Server
    After creating the new ones and running them, I deleted the old ones. Then I Indexed the Information Space and everything seemed fine.
    Regards,
    samique

  • Sound alert for Nokia Messaging email

    Hi
    I am using Nokia X6 and this is about the nokia messaging email. Earlier I used to get a email alert notification (sound) when a new mail used to come. But now it is not coming. Every 5 mins i keep checking if i got a new mail manually.
    Tried resetting the phone to factory setting. Still not getting
    Even checked the setting at the location:-
    menu -> settings ->personal->profiles->general->personalise-> email alert tone (email2.acc). But this setting seems to be for "mail for exchange" (the one in message folder) and not for nokia messaging email.
    Any pointers to solve this would this be of help
    Thanks
    Phani Krishna

    You've checked to see if you have notifications muted ? That will mute notification sounds (including games), but the Music and Videos apps, and headphones, still get sound.
    Depending upon what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute/unmute notifications by the switch on the right hand side of the iPad above the volume switch (if that setting is set to 'notification mute'), or via Control Centre (setting set to 'rotation lock') : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via Control Centre instead : About the iPad Side Switch - Apple Support

  • Status Profile and User Status  for Support Message

    Hi All,
    We need to customize Status Profile and User Status Specifc  to customer requriments.
    we need the following Status for Support Message:
    Open
    Accepted
    Rejected
    Fixed
    Retest
    Closed
    Note:
    1] Only the Message creator should be able Set staus Open and Closed
    2]  Message Processor should only set status Accepted, Rejected, Fixed and Retest
    I have created the Status Profile in BS02.
    Can some one help me the steps or guide how to implement the above logic and restrict the status access between Message Creator and Message Processor
    Thanks!
    Regards,
    Pradeep  L

    > 1] Do i have to create different Auth.key for Message processor and Message creator and then assing them in BS02 to Status Profile?
           Anand: Diffrent authorization key for different statues......not for message processor and creator
    > 2] Now how do i assign this Auth.Key to the Auth Object B_USERSTAT?
           Anand: Using Tcode PFCG, this can be done.... Consult Basis.....
    >     do i have to create a new Zrole and assign or is there any other way.
           Anand: Yes u need to create a Z role and include that authorization objects in that z role....
           so u might have to create 2 Zroles and then assign them to the persons concerned....
    Inspire ppl by rewarding
    Regards,
    Anand...

Maybe you are looking for