The Messaging Engine failed to register the adapter for "WCF-BasicHttp"

Hi,
I have a strange problem with BizTalk 2013 on Windows 2012.
It is with exposing an orchestration or schema as a web service, I always get the error "The Messaging Engine failed to register the adapter for 'WCF-BasicHttp' "
This happens also am sure I did the followings:
-Enabled the receive location
-Have separate pool for each web service
-The pool user is part of the Isolated Group & IIS_Users group
-The user has access to BizTalk databases
I tried the procedure on different environment, and it works just fine, what is causing this on this environment really I don't know!!
Is there something I should do on the IIS?

I just resolved it, the issue was with the server name exceeding 15 characters; which resulted in mismatch in credentials, since Windows will only take the first 15 characters.
So, I shortened the server name to 15 characters, and everything now works fine.
Thanks again,

Similar Messages

The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location

Could anyone please help in resolving the following
error:
Server Error in '/BizTalkXXXMyAppWcfService' Application.
The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc".
Please verify that the receive location exists.
It does exist: When I go to All Artifacts >> Receive Locations I can see: WcfService_BizTalkXXXMyAppWcfService/XXXMyApp
Also it is Enabled, green, up and running.
…and that the isolated adapter runs under an account that has access to the BizTalk databases. – Checked, the BizTalkUser has all the permissions to access BizTalk databases.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive
location exists, and that the isolated adapter runs under an account that has access to the BizTalk databases.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0xc0c01666): The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive location exists, and that the isolated
adapter runs under an account that has access to the BizTalk databases. ]
   Microsoft.BizTalk.TransportProxy.Interop.IBTTransportProxy.RegisterIsolatedReceiver(String url, IBTTransportConfig callback) +0
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +318
[AdapterException: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc"; receive location does not exist or is disabled.]
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +875
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +363
   System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1423
   System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
   System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1132
[ServiceActivationException: The service '/BizTalkXXXMyAppWcfService/XXXMyApp.svc' cannot be activated due to an exception during compilation. The exception message is: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc";
receive location does not exist or is disabled..]
   System.Runtime.AsyncResult.End(IAsyncResult result) +890624
   System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +180062
   System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107

Hi,
This seems to be a permission issue.
Makesure account used in the application pool is a member of the BizTalk Isolated Host Users group.
Also its working considering either make the ASPNET user account a member of your BizTalk Isolated Host Users group to make sure it has access to the biztalk databases (or change the asp.net services to run under a different account, which would need
to be done from the framework's core .config files)
Regards
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

The Messaging Engine failed to retrieve the configuration from the database. Details:"c0002a1f".

Hi All,
We have two BizTalk nodes, from both nodes we are getting this error from today morning, nothings has changed from application end.
Error : The Messaging Engine failed to retrieve the configuration from the database. Details:"c0002a1f".
Warning : Cannot perform encryption or decryption because the secret is not available from the master secret server. See the event log for related errors.
Can you please suggest step where need to check.
I don't have any knowledge where the master secret file saved during installation.
Regards
Suman

Most of the time, master secret server is not backup frequency. Mostly its is done during the time when the servers have been setup. If anything changed between the time the master secret has been backed up and now, then you don't have the correct version
of master secret file backed up. This is why its is always a good practice to backup the master secret periodically and also try restoring in any of the test server to verify the backed up file is correct and also to make us conformable in restore
process.
You have one option now, try restoring with the file what you have (4 years old). If the backed version is not the correct version, then only option is to reconfigure the BizTalk.
MSDN: How to Restore the Master Secret
You cannot backup the master secret file now as ii could have been corrupted. That the reason we're suggesting to restore the corrupted master secret file. For your future reference, following the steps as suggested in this article to take backup of master
secret.
MSDN: How to Back Up the Master Secret
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

I receive the message "Error: Failed to register" when installing Adobe Flash Player 11.5.502.135 o

I receive the message "Error: Failed to register" at the end of attempting to reinstall Adobe Flash Player 11.5.502.135 (after a complete uninstall of all Adobe programs) on my older machine running Windows XP and the older browser IE 7. I have tried the offline download installer and my Google Chrome browser setting is "allow all sites to run Java". I allowed the program to run from my AVG firewall dialog box. Windows firewall did not ask. I am logged in as administrator. What should I do because some programs prompt me for this install in order for some functions to work correctly.

See if this topic contains a solution for your problem: How do I fix Windows permission problems with Flash Player?

The Expression Engine failed to evaluate the expression for a Subportal Act

Anyone seen this error before and know of a fix? We're getting it on our 6.1 MP1 portal after we deployed our custom sso solution.
"62 12-19-2007 12:58:37.292 Error Portal_UI_Infrastructure portal.c27mynrspaxr01.webadm .NET #32 com.plumtree.portaluiinfrastructure.condition.ConditionTypeManager The Expression Engine failed to evaluate the expression for a Subportal Action.
System.NullReferenceException: Object reference not set to an instance of an object.
at com.plumtree.portaluiinfrastructure.condition.ConditionTypeManager.EvaluateExpressionForSubportalAction(AActivitySpace asCurrentSpace, IApplication application, IXPRequest xpRequest, Object ptUserSession) in e:\buildroot\Release\portalui\6.1.x\ptwebui\portaluiinfrastructure\dotnet\prod\src\com\plumtree\portaluiinfrastructure\condition\ConditionTypeManager.cs:line 260 <ptLogMsgEnd>"

As far as i know this is a harmless error. Our portal generated that message every time someone browsed /portal/server.pt.

When I sync my iPhone with iTunes I get an error message that says "iTunes could not sync calendars to the iPhone because the sync server failed to sync the iPhone"

When I sync my iPhone with iTunes I get an error message that says "iTunes could not sync calendars to the iPhone because the sync server failed to sync the iPhone" How do I fix this?

I had the same problem. I found this site http://itprokb.blogspot.com/2010/10/itunes-could-not-sync-calendars-to.html
It worked for me. Good luck!

I have been receiving the message ' Cannot get mail. The connection to the server failed' but I am connected to WIFI

I have been receiving the message ' Cannot get mail. The connection to the server failed' but I am connected to WIFI. I have also been receiving 'Cannot send mail, an error occurred while delivering this message.

Hmm, that's odd JeanEB. The error message referts to the connection to your email server not to cellular data or connection to wi-fi. Go to Settings>Mail, Contacts, Calendars> Select your account and type in your password again. If this doesn't resolve it, delete/re-add the email account.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in

Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in german "Fehler bei der Anmeldung"). I hope have explained the issue on the right way with my bad english. Do you have a solution for it?? Best regards, Marcus Wenk

yes, you are right. it is the adobe reader via exportPDF. but it should be the acrobat. it was written on the internetpage...

Having installed Aperture iPhoto won't open. When I try it fails with the message "You can't open the iPhoto.app because it may be damaged or incomplete. Any help please?

Having installed Aperture, iPhoto won't open. When I try it fails with the message "You can't open the iPhoto.app because it may be damaged or incomplete. Any help please?

OK, fixed it. Found that iPhoto is now BACK in the App store.
Found iPhoto app in Finder and dragged it to Trash.
Downloaded iPhoto from App store and all now back working again.
Didnt expect to find iPhoto in App store as last time I looked it wasn't available.
Nige

I can't install Komplete Elements. I got the message Install Failed. The following install step failed: Run postflight script Kontakt 5 Content.

When I tried to install the free copy of Komplete Elements that came with my Komplete Audio 6 Interface I got the message : Install failed. The following install step failed :Run postflight script 5 Content. I was able to insall the Audio 6 drivers but didn't choose to load Traktor or Cubase LE because I use Garageband.
I have a Macbook. Running version 10.5.8. GHz Intel Core 2 Duo.
I tried the url their tech support sent me but that didn't work either.
If this is not the right forum please redirect me.

Thanks for answering. The weird part is that I was able to install Audio 6 and record my bass but Elelements won't install at all. When I orginally ordered it the site said that Elements would run on 10.5.8 but I guess you're right. I am going to have someone check it out later today. I'll let you know what happens. If you only want the Audio 6 Interface they sell it for $229 at Music123. I shouldn't complain because Elelements was free but the more I looked into it the more I became interested.. Another strange thing is that I told Komplete tech support I had 10.5.8 and they never told me it wouldn't work.

When i connect my iphone to the computer it gives me this message "ITunes could not sync contacts to the Iphone "my name" because the sync server failed to sync the iphone. whats the problem

when i connect my iPhone to the computer it gives me this message "ITunes could not sync contacts to the iPhone "my name" because the sync server failed to sync the iPhone. what is the problem?

What type of computer?
Mac: Sync Services: Advanced troubleshooting for contact and calendar syncing
Windows: Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
The following previous discussion may also help: Re: sync server failed to sync the iphone

While doing a sync, I received a phone call. Since then I get a message during sync " Itunes could not sync contacts to the iphone because the sync server failed to sync the iphone. What to do?

While doing a sync, I received a phone call. Since then I get a message during sync "Itunes could not sync contacts to the iphone because the sync server faile to sync the iphone". What to do?

I had same problem,,This link solved issue easily
http://www.question-defense.com/2010/09/01/itunes-could-not-sync-calendars-to-th e-iphone-because-the-sync-server-failed
I didn't lose any calendar since it was all on the computer in Outlook calendar

TS4062 I am getting the following message: iTunes could not sync calendars to the iPad because the sync server failed to sync the iPad. Help!

I am getting the following message: iTunes could not sync calendars to the iPad because the sync server failed to sync the iPad. Help!

Found the solution at http://support.apple.com/kb/HT1692.
In my case, resetting the sync history and disabling the add-ins fixed the problem.

Cant send mms messages. I get the error message: "one or more of the message components have been delted by MMS Adaptation. Either the message was too large or the components were unsuitable for your handset". This only seems to be an issue to iphones.

I cant send pic messages to iphone users. I get the error message: "one or more of the message components have been delted by MMS Adaptation. Either the message was too large or the components were unsuitable for your handset". This only seems to be an issue to iphones. I like this phone but have had nothing but trouble since day one. I am so tired of being on the phone with verizon and still not getting all the problems corrected. Someone please help!

Hello christina267,
Help is right here, front and center! Let's get your mms working properly. May I ask are you using the original stock messaging app to send texts and mms? Also, are you using any special characters or emojis in your message? Since you state that the issue is to iPhones, did you happen to have used an iPhone on your mobile number just before you were using the Galasy S 5? As you share the details then we can investigate.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

I get the message: Installer failed to initialize. This could be due a missing file.

I get the message: Installer failed to initialize. This could be due a missing file. Could someone help me?

The installer for what product? On what operating system?

The Messaging Engine failed to register the adapter for "WCF-BasicHttp"

Similar Messages

Maybe you are looking for