Register Relationships and Device Grouping
Hi All,
Can anyone provide me some documentation on Register Relationships and Device Grouping in IS-Device Management and the respective use of the same.
Use means I mean: on which business cases we are going for register relationships and device grouping and the needed configuration needed to be done.
Hi Niladri,
Please go through the below link
http://help.sap.com/saphelp_rc10/helpdata/en/9c/862f9c10df11d285250000e8200ef0/frameset.htm
If you still face any problem do let us know.
Regards,
S
Similar Messages
-
SSL Accelerated Service and device groups
I have a need to set up SSL accelerated services on a data center WAE and one edge WAE. In reading through the Cisco Wide Area Application Services SSL Application Optimiser Deployment Guide (2010), it states that best practice is to create an SSL device group and configure the SSL service and generate the keys through that group.
Simple question: Should only the data center WAE be placed in that group, or should also the edge WAE be in the group? The devices are running 4.3.3.Only the data center wae's need to be placed in the SSL device group.
Regards
-Smita -
CSM per admin group using per device group
I am looking to see if multiple admin and device groups can be created to limit certain administrators to administrate only certain devices but not others.
For example:
admin group "ag_na" (including user admin1 & admin2) can make changes to device group "dg_na" containing (device 1, device 2) only
admin group "ag_ca" (including user admin3 & admin4) can make changes to device group "dg_ca" containing (device30 & device31) only
Any tips on if / how to do this?
ThanksYou can do it by integrating the CSM into an ACS v4.2 and doing RBAC. There you can define for which NDGs a user has which access policy.
http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/4.1/installation/guide/aduser.html#wp1063220
Unfortunately this is a short-therm solution as ACS v4.2 has been put to EoS and no real alternative methods are available today. Hopefully Cisco will come up with a new solution on the long-therm. -
We are currently running NCM 1.3 (Build 4045-112607). I am wondering if it is possible to define a default owner for Sites, Parent Device Groups, and Device Groups? Our dilemma is we have several engineers with the ability to create these containers. Once an engineer leaves you cannot delete their account as long as they are owners of a Site, Parent Device Group, or Device Group. I know if you have admin privileges you can select the owner of the Device Group at creation. Is there a way or is it possible to select/change the owner of a Site or Parent Device Group?
Hello Thorsten, I checked your helpful link, but it doesn't change the situation.
In my opinion I have an inconsistency in the ccr repository, but it is not my intention to edit it directly.
On node is left, and the diskset is Online:
! root@pixtest1:/ # scstat -D
-- Device Group Servers --
Device Group Primary Secondary
Device group servers: jboss-set pixtest1 pixtest2
-- Device Group Status --
Device Group Status
Device group status: jboss-set Online
-- Multi-owner Device Groups --
Device Group Online Status
! root@pixtest1:/ # metaset -s jboss-set -d -h pixtest2
metaset: pixtest1: jboss-set: host pixtest2 is not in the set
! root@pixtest1:/ # metaset -s jboss-set -d -h pixtest1
metaset: pixtest1: Failed to delete hosts from DCS service: No such file or directory
! root@pixtest1:/ # metaset -s jboss-set
Set name = jboss-set, Set number = 2
Host Owner
pixtest1 No messages are logged in syslog as I execute the commands.
-- Nick -
How do we get register code and group ?
ji,
how do we get register code and group based on device category?Use the below FM to fetch the equipment number
ISU_DET_DEVICE_FROM_DEVLOC
X_DEVLOC = device location
X_KEYDATE = sy-datum
Then call the below function to get euipment details
ISU_DB_EZWG_SELECT_METER
X_EQUNR = equnr
X_AB = sy-datum
Alternately
Pass device location in table Egerh & fetch the equipment and register group. Then pass equnr in table ETDZ to fetch register code.
Edited by: vikrant guptarya on Jul 20, 2011 2:46 AM -
StoreFront : Payment and Shipping group relationships are missing for some orders
Hi Team,
In our application, we are able to see relationship between payment and shipping group for some orders. But we are not able to find these relationships for some orders.
We are verifying in "dcspp_payship_rel" table. We are wondering why this behavior is happening for some orders.
Could you please suggest to move further ?
Regards,
Babji...Hello.
First of all you must ensure that you are properly using transactions when you create/update the orders.
There are best practices to update the orders in ATG that must be followed to avoid loss of information.
Like this steps below:
Acquire a write lock using the ATG lock manager.
Start the transaction.
Synchronized on the Order object.
Update the Order.
End the synchronization.
End the transaction.
Release the lock.
Here are some links that should help you understand the steps to be followed to make a correct update of an order:
https://atgoasis.wordpress.com/2014/08/28/best-practices-for-updating-an-order-in-atg-commerce-applications/
http://www.digitalsanctuary.com/tech-blog/java/atg/design-pattern-for-updating-an-atg-order.html
http://sumangalavijay.blogspot.com.br/2011/10/atg-update-order.html
Oracle ATG Web Commerce - Managing Transactions in Oracle ATG Web Commerce
Hope it helps you! =) -
Experts,
I see below info from F1 help about registers,
Device that measures consumption, energy, etc.
This can refer to an actual register or a display in an electronic device.
If register is device that measures energy that why do we have a separate concept called device and device category in ISU. How are registers different from a device in ISU. I am learning the concepts of ISU being a fresher. Requesting you all to kindly guide me.
BR,
AspireAspire:
A device can have registers (not all devices do) - registers record the readings. A device belongs to a device category.
For more information please read the Research Resources and Rules of Engagement and check the links for basic application help.
regards,
bill. -
Printer device group and a label format in SAP AII
Hello @ all,
I try to configure a SAP OER System with SAP AII. Now I should configure the label printing with the transaktion /AIN/ASGN_PRF_FORMAT. I must take a profile name, a printer device group and a label format. The problem is now, that I can't chose a printer device group and also I don't know the label format. Where can I adjust the printer device group and which label format must be in that field?
Can anybody help me?
Thank you.
PeterHi Peter,
SAP AII sends the label format filename as part of the Command message xml to the printer during tag commissioning.
I assume you have configured the label format filename for SAP_PRINT_PROFILE using transaction /AIN/ASGN_PRF_FORMAT - Assign Format to Printer and Profile
Now you have to assign that profile to an ID type or GTIN, etc. using the menus under Profiles for Tag Commissioning and Label Printing.
Once this configuration is done, the xml command message containing the element WriteTagData is sent to the printer RFC destination configured against the Device controller as an HTTP message.
This command message will contain the label format and field names - value pairs as per the SAP_PRINT_PROFILE. -
Device group and applications affinity
Hello all.
I have some device groups created with CFS configured on them.
I need to ensure that a clusterized application runs on the server that is primary for the device group. I need to set an affinity between the affinity and the device group/file system.
The problem is that the SUNW.HAStoragePlus does not indicates the real primary for the device group, for example:
# cldg status ufs_homedg
Cluster Device Groups ===
--- Device Group Status ---
Device Group Name Primary Secondary Status
ufs_homedg billbd2 billbd1 Online
# clrg status ufsg-home-rg
Cluster Resource Groups ===
Group Name Node Name Suspended Status
ufsg-home-rg billbd1 No Online
billbd2 No Offline
In this output, the resource group is online in billbd1 and the device group primary is billbd2.
If I failover the resource group, the device group is switched also, but it seems that at startup, the resource group does not check who is the primary to start on that node.
This means that the status of the resource group does not helps to identify who is the primary for a device group and I cannot use it for affinity configuration.
¿How can I ensure that an cluster application starts on the node who is primary for the device group on which the file system is created?
I was thinking on a SUNW.gds for this purpose, but I wonder if there is another way.
Thanks in advance.
Edited by: Ivan.Ferreira on Jun 19, 2008 8:04 AMHi Tim, thanks for your time.
Yes, I'm using AffinityOn=TRUE. After some testings, I can see that the device group is switched at startup, but I don't know under which circunstances it does not.
Also, I can force discrepancy with the device group and the resource group if a perform a cldg switch.
So, if I run clrg switch, the device group is switched also. If I run cldg switch, the device group is switched but the HAStoragePlus resource does not.
This means that HAStoragePlus cannot ensure that the node is the primary for a device group and cannot be used for affinity on applications.
�What do you think? -
Hello All,
I can no longer use all of the "Computer Management" tools against a remote
computer. "Local Users and Groups", "Event Viewer", "Performance Logs and
Alerts" and "Device Manager"
kindly see the below snapshot for assistance
REGARDS DANISH DANIEThis link may help....
http://windowsxp.mvps.org/admintools.htm
Freeman -
Register relationships for meters
I am trying to find out a way to delete register relationships for meters in background mode. The transaction EG76 will do it in foreground.
Function ISU_O_REGRELSHIP_ACTION supports an action "DLT" to delete the relations (check constants of the function group). Because we know, that what we want can be done with this functions we can simply debug it!
1. Set break-points in the following function modules
- ISU_O_REGRELSHIP_OPEN
- ISU_O_REGRELSHIP_ACTION
- ISU_O_REGRELSHIP_CLOSE
2. Execute transaction EG75/76 (Create/Change) with test data and do whatever you want to to
3. Debugger opens
4. Check parameters of the function modules called very accurately (all three should be executed; most likely several times)
5. Write a test program with the parameters and try to force *_OPEN into background mode (X_NO_DIALOG = ABAP_TRUE)
6. If it's not working, additional data is required so you properly have to adjust the parameters by testing (see exceptions and SY-parameters for error details)
7. Repeat 2 to 6 until no errors are returned
8. Profit -
Trash and user group help!
why do i need to type in password when i delete things? how do i remove it?
and i can't delete items directly from the dock as well. like opening from the downloads folder and dragging the file to trash. i have to bring open up Finder and delete from the folder directly.
another issue is that am i able to remove the gues user from my start up screen? i've already disabled it from the user groups but i still see it in my login screen.
one last problem, is it a norm to have current leakage for the MBP? i've been having frequent shocks from the 2 bottom corners of it when i plug it in to a power source. i bought it from an authorized retailer and using it in the country where i've gotten it from. i've just gotten my mbp about 3 weeks back.
thanks for replying my queries!Hi,
Yeah in ACS 3.1 its under the Shared Profile Components page. In ACS 4.1 its directly under the user groups or under SPC page.
You need to check the box for "define ip based access restriction" and deny access for all other groups to the wireless access points network device group.
ACS 3.X)
1. Denied Calling/Point of access restrictions
2. AAA Clients =UPS_PDU (Power Supplies)
3. Port = just put a * for all
4. Src IP address = just put a * as well
SUBMIT to SAVE
Create a second one for the other group like so:
1. Denied Calling/Point of access restrictions
2. AAA Clients =Routers_Switches
3. Port = just put a * for all
4. Src IP address = just put a * as well
Click submit to save it.
Go to the ACS User groups section and select the Network Administrators Group " that don't need access to the UPS's" and apply the NAR you created to that group. Do the same for the other grouping.
(ACS 4.X)
Go directly under the "user groups" and create the NAR under there. No need to go under the Shared Profile Components section
Hope this helps and let me know if you need further assistance or explanation.
Craig -
CUCM 8.6.2 Phones not registering 7841 and 8831
Hi all
I am trying to register some new phones - 7841 and 8831. We installed the COP and Device Pack and rebooted the cluster. Firmware defaults in the server are sip78xx.10-1-1SR2-1 and sip8831.9-3-3-5.
These are the first phones of these models that we are trying to use. All other devices are up and working. I added the phones manually, auto-reg is disabled. These new phones are both displaying the same behavior - they booted, but neither device will register. They are both running the the same firmware version configured as the default in the server.
I have looked at some other discussions but haven't seen any solutions that match up with our issue. Your input and ideas appreciated, thanksI'm having this same problem. Over the weekend, I installed the latest device packs and restarted both servers in the cluster. I'm running CUCM 8.6.2 and the phones are 8831.
What's really strange is that the phone is getting incorrect info from the switch port. It's getting a DHCP address from the VLAN2 subnet, when it should be receiving an IP from the VLAN100 subnet.
VLAN2 = Data
VLAN100 = Voice
The original port config:
interface FastEthernet0/25
description Workstations on VLAN2 - Phones on VLAN 100
switchport access vlan 2
switchport trunk encapsulation dot1q
switchport trunk native vlan 2
switchport mode trunk
switchport voice vlan 100
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
mls qos trust device cisco-phone
mls qos trust cos
auto qos voip cisco-phone
spanning-tree portfast
end
I even changed the switch port configuration to this:
interface FastEthernet0/25
description Workstations on VLAN2 - Phones on VLAN 100
switchport access vlan 100
switchport trunk encapsulation dot1q
switchport trunk native vlan 100
switchport mode trunk
switchport voice vlan 100
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
mls qos trust device cisco-phone
mls qos trust cos
auto qos voip cisco-phone
spanning-tree portfast
end
VLAN 2 isn't even in the configuration, but the phone (even after a RESET) is still getting an IP from the DHCP server on VLAN2.
Very strange behavior.
Additional info:
The phone status menu is showing a continuous message of:
TFTP Timeout : SEPXXXXXXXXXXXX.cnf.xm.
No Trust List Installed.
Any suggestions / ideas would be appreciated. -
I recently set up a new computer. Signing into Sync restored my bookmarks but not my Firefox windows and tab groups. I can get a LIST of "Tabs From Other Devices" to show up, but what I want to do is to restore the session from my previous computer. Is it possible to do this with Sync? I thought that this was supposed to be one of the things it was for.
You can copy the sessionstore.js file in the current Firefox profile folder to an USB stick and copy that file to the profile folder on the other computer.
*http://kb.mozillazine.org/sessionstore.js
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder) -
The Ultimate Guide to Resolving Profile and Device Manager Issues
The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
Hello,
I have been plagued with Profile Manager and Device Manager issues since day one.
I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
(Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile and Device Manager may need a Code Signing Certificate.
The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
I shall outline a sensible strategy:
1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
2. Start the server fom the clone and shut down ALL services.
3. It may be sensible to set up a root user access.
4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
Erase database:
sudo /usr/share/devicemgr/backend/wipeDB.sh
7. Note your Directory (diradmin) password for later if you want to re-use it.
8. Open Open Server Admin and demote OD Master to Standalone Directory.
9. In Terminal delete the old Certificate Authority
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
This step is crucial because else re-building you OD Master will fail.
9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
11. Go back to Workgroup Manager and re-import users and groups.
NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
If the home directory has not been defined you cannot login from a network account.
13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
14. You can now switch back on your services, including Profile Manager.
In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
16. Check that Apple Push Notifications are set.(you easily check if they are working later)
17. You may want to re-boot OS Server from the clone now.
18. After re-boot open Server App and check that your server is running well.
19. Delete all profiles in System Preferences -> Profiles.
19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name should read "Trust Profile for...) and underneath in green font "Verified".
21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
Now enjoy Profile and Device Manager !
Regards,
TwistanHI
1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
also make sure that u have the message processing role
Hope it clarifies ur doubt and resolve ur prob
Regards
Prakhar
Maybe you are looking for
-
I was ALWAYS able to open Adobe Reader items on my IMAC but just recently it is giving me a message stating "Before Viewing PDF documents in this browser you must launch Adobe Reader and Accept the End User License Agreement, then quit and relaunch t
-
Hello, I've an installed Solaris 10.0 x86 platform. In order to run System Management Console, I type; #smc ...and the System Management Console is runing and "toolbox window" appear. I select "Management Tools" and then something from navigation pan
-
I'm using a number of Mac minis to run kiosks and would like to have just one monolithic disk image that I distribute to all of them, for ease of administration. But how do I manage the OS-X licensing in this situation? I shouldn't have to buy any ad
-
BAPI_PO_CREATE1 - Delivery date
Hi all, I'm trying to create a PO by BAPI_PO_CREATE1. The problem is that the PO is created with a default delivery date and no the one I passed it. I put in the po_schedule table the delivery_Date and also I fill the po_schedulex table, but the new
-
SDO_AGGR_UNION of polygons result a geometry with a line segment inside?
Hi, I am struggling with a problem, I cannot find the reason. I have 3 polygons in Oracle Spatial 11g (Enterprise Edition Release 11.1.0.7.0 - 64bit Production): All three are simple polygons: SDO_GEOMETRY(2003, null, null, (1,1003,1), (... coord arr