Register with UCS Central - Stuck on Repair Cert Verify Guid

I've got a new instance of UCS Central running v1.1.1a up. I'm trying to register my 3 UCS Manager domains. It seems to accept the hostname/shared secret and prompts me about accepting the certificate. But when I look at the FSM tab I see it's stuck on "Repair Cert Verify Guid".
Anyone else run into this?
Thanks,
Jonathan

Hi Padma,
Are you sure the shared-secret matches between Central and UCSM ? Yes. Just to make sure, I reset the shared secret and tried to Register with UCS Central again, but it made no difference.
Are you using self-signed certs or third party signed certs on UCSM ? I am using the self-signed cert that UCS Central issues.
Are those certs still valid ? I think the self-signed cert is okay, I can login to the UCS Central webpage.
Were these UCSM previously registered with different Central device ? No. However one of the domains was successfully registered with this UCS Central server and then unregistered. Then I made a number of changes to the UCSM including updating to Infra bundle 2.1.2a. I don’t think updating the UCSM infrastructure bundle would have this effect, but I wonder if I need to reset the UCS Central system somehow.
Thank you for your assistance.

Similar Messages

UCS Central 1.1.1a

Hello,
I am using UCS Central 1.1.1a and have spun up couple of UCS Emulators to see how the UCS central works. I was able to register the UCS central on 2 UCS Manager domains. But these UCSM are not being displayed on the UCS Central GUI. Do I have to create any policy for the UCSM to show up in Central?
Thank you!

Unfortunately, there’s a version lock compatibility issue. UCSM 2.1.1 (and PE 2.1.1a) will only work with UCS Central 1.0. UCS Central 1.1(released just yesterday) will only work with UCSM 2.1.2 --- and the corresponding PE, when it becomes available. So for now, the only way to work with UCS Central 1.1 is going to be with physical domains, not emulators.
Please stand by as the new PE for 2.1.2 will be available shortly.
Thanks,
-Jeff

I can't take ressources in global pool of UCS Central

Hello
I try to use UCS Central to manage my differents pool (mac, WWN, UUID).
From Central I can't see local pool of UCSM !!! From UCSM, i can see global port i defined, but when i choose a ressource of global pool, i have en error : Resolving identifiers from UCS Central.
The central sees UCSM, UCSM is registred to Central, and UCSM sees the global pool but doesn't use.
I try to resign UCSM, to reinstall UCS Central but it's the same thing.
Are there any commands to check more communication between central an UCSM ?
Thank
Stéphane

Thank Chetan,
From UCSM, the ping is ok with UCS central.
I want to check from UCSM the possibility of use global pools (ucs central).
From UCSM GUI, when I create a Service Profile, i can see global pools (mac, wwn, uuid), but when I try to used it, I have an error :
"UUID address assignment failed, possibly illegal UUID or no available UUID in the pool"
If i use a local pool, it's OK.
How can I debug this problem?
From UCSM CLI or central CLI, can I have commands that can give me more details about the global pools, and to see that global pools work properly.
Stephane

UCS Central - Making Boot Policy - SAN boot target Provisioning

Gents
Some objects is always related to the domains and need to be provisioned in global like
VLANs: but we can did it by Provisioning VLANs with UCS Central Using VLAN ID Aliasing.
VSANs: the same idea in VLAN ID Aliasing.
Boot Policy adding SAN boot target : what about this issue how can I provision it so I can configure it globally in abstract way then it will take targets depend on domain during associating the global service profile.

@Gmonroy
Thanks for support
But if I need to make a global Service profile temp so I can deploy SF from it in any domain, and if I referenced this service profile temp to one boot policy so i need to unbind each service profile created from this temp to associate a different boot policy in each domain ? " I will lose the benefit of updating service profile template "
Or I have to create different template per domain ? " I will lose the key benefit of centralizing Templates in UCS central"
Or there is any workaround to deply this senario.

UCS Central 1.1.1a, LDAP, UCSM 2.1

Hi All,
I have couple of questions regarding UCS Central deployment.
Customer has mutiple domains with variety of OS being installed per UCSM domain (VMWare, Redhat, Windows, Hyper-V, Oracle) .
1. Should I go ahead and create mutiple Domain Groups in UCS Central? Add each of the domain to respective DG later on? Or Should I just add all the UCSM instances to Org-root DG?
2. Customer wants to deploy LDAP and since there are mutiple UCSM domains here, VMWare Admin should have access only to VMWare blades same follows to rest of the OS types. Does LDAP works with UCS Central 1.1.1a, UCSM 2.1? I have tested on UCS Central 1.1.1a, for some reason the third tab (Domain) doesn't list when I launch UCS Central. Am I missing anything here?
Thanks a lot in advance.
Best Regards,

1. Creating DG's can be done at anytime. And domains can be moved between DG's subsequent to the initial installation --- though you should be aware that doing so may have service impact, since you are potentially changing policy resolution for multiple domains. As a best practice, you do not generally want domains directly under the root DG --- use other DG's (or sub DG's). Another best practice to minimize risk is to minimize domain movement between DG's. So I'd recommend DG creation and domain placement initially.
2. LDAP works on UCSM 2.1 --- but there are some known limitations with UCS Central 1.1.1a. Best Practice is to not put anything under the root DG directly --- use other DG's (or sub DG's). Especially necessary for LDAP. Never put LDAP configs under the root DG. (Not clear what the "third tab(Domain)" is referring to. Can you please post a screenshot or detail what you're expecting?)

I accidentally in put the wrong email address when attempting to register with iCloud. As such, I can't verify the account with that email address because it does not exist. What should I do?

I accidentally input the wrong email address when attempting to register with iCloud. Therefore, I can't verify the account because the email address that I accidentally used does not exist. Can someone help me figure a way out of this because there does not appear to be a way to edit the email address?

try https://appleid.apple.com... enter the new icloud id, and try to edit the email address assocaited.

UCS Central untrusted cert with UCSM

I am using the default keyring in UCSM & have installed this cert to my trusted root certs. The problem I am seeing is that everytime I go to view the fault summary tab within UCS Central & click on my UCSM, it pops up the warning "UCSM Communication Error". When I proceed to accept the certificate it tells me
"You attempted to reach X.X.X.X, but instead you actually reached a server identifying itself as Hostname"
My question is, why is UCS Central trying to connect to the IP instead of the hostname? Do I have something configured incorrectly? Or is this a bug of the first release?

Hello Jon,
Currently UCS central only uses default self-signed certificate and does not support third party signed certificates.
You can track the enhancement request via this defect
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCuh06347
*NOTE* It will take a while to get published on cisco.com website.
For the second issue, I would suggest you to open a TAC service request to investigate why it uses IP address instead of name.
Padma

Rebuilding /re-registering UCS Central (MAC/WWPN issues?)

Hello,
My Standalone UCS Central VM has failed and we have no backups!! I need to rebuild a new UCS Central server. The old UCSC VM had MAC and WWPN pools configured. Has anyone ever had to unregister a UCS Central server and register a new one into the same environment.
How will the existing environment deal with the registration of a new UCSC?
Could I build a new server and recreate the pools in the same format? (Would it create conflicts as the existing services have been allocated MAC and WWPN already from this 'new' pool)
Cheers, KP

Hi Walter,
Unfortunately, I need to install UCSC from scratch and register it with my UCSMs.
I intend on reusing the hostname and IP
Luckily, we have no global service profiles (only local profiles and templates) but we do allocate WWPN, WWNN, UUID, MAC via UCS Central. I believe these will be preserved when I unregister the old server.
I wanted to also recreate the above pools in the same format/same range but wanted to make sure the new UCSC didn't provide existing IDs consumed by local profiles only available IDs.

UCS Central unable to communicate with UCSM

We started using UCS Central .. Its very cool . I can add domains into UCS Central . I see pools of the domains I add in . I even see the fault Numbers at the top of the screen . What I cannot do is click on the faults tab or events tab of any Domain I add in . It makes UCS Central unusable .
The is happening with the defualt key ring and we created CA certificates also which doesn't solve the issue . It almost looks like its trying to connect to UCSM by IP rather then DNS name . I'm not sure why this happening . I will probably open a TAC case . I attached a screen shot of the error .
Hope someone has run into this .

Hello Chris,
Is http to https re-direction enabled on UCSM ?
Is UCSM correctly registered with Central with valid certifcates ?
Check out best practices guide ( section Registration and Certificates and Certificate troubleshooting section )
https://communities.cisco.com/docs/DOC-32030
Padma

UCS Central Inventory Status is stuck at "in-progress"

One of the UCS Domains connected to UCS Central is not updating it's inventory in UCS Central. In UCS Central it shows the Inventory Status is "in-progress" and the last refresh was several days ago.
I've have restarted the UCS Central VM and attempted the "refresh-inventory" command in the CLI, but the "Inventory Status" remains as "in-progress."
Another UCS Domain connected to UCS Central is updating properly:
We have three blades that UCS Central is not detecting which is preventing a Service Profile from associating.

The FSM Status in UCSM says "Success." As I stated above it was registered fine and working fine for several weeks.
Now however the inventory in UCS Cental and in UCSM are out of sync. Since it isn't seeing some new blades that were installed we can't add them to a sever pool or associate Global Service Profiles.
UCS Central shows the Last Refresh as several days ago (the screen grab in the orginal post.) I believe it should be updating inventory every 10 minutes. I have tried to manually refresh the UCS domain in UCS Central CLI with the "refresh-inventory" command with no luck. I have also Suspended and Acknoledeged the UCS domain with no change.

UCS Central Pools

Hi, when I create pools in UCS Central they do not get updated in UCS Platform Emulator 2.1.1a, is this normal behaviour?. I have tried IP Pools, ext-mgmt IP Pools, and MAC pools, either way they cannot be referenced in UCSPE which is successfully registered and in domain group. The UCS Central apears to be able to read from the UCSPE but not write to it. Please confirm whether this is expected or there is a trick or issue to overcome?. Thanks

The Global Pools (created in UCS Central) do not show up in the UCSM GUI (PE or real) under the "Pools" tree. But --- if you're changing the UUID/MAC/WWxN for any of the local resources, then you should indeed have visibility to the Global Pool names from the resource's corresponding ID pool drop-down menu in the GUI. For example, changing the MAC Pool for a VNIC or VNIC template --- you should be able to see globally defined pool names.
Note that for 2.1.1a, with UUID changes you can see "Global Pools" and "Domain Pools", whereas for VNICs and VHBAs, you'll see both global and local pool names listed together. [Therefore, it's always a best practice to prefix global pool names with "Global-" or "G-", to easily distinguish.]
Hope this helps,
-Jeff

My ipod touch is stuck in repair mode how do i fix it?

my ipod is stuck in repair mode, how do i fix it?

Hi,
Tap twice with 3 fingers. Then go to Settings>General and scroll down to Accessibility and turn Zoom off.
Ben

1st Gen iPod touch Keeps Having to Be Re-Registered with iTunes

My 1st Gen. iPod touch works very well, with one exception. Every few weeks I'll turn it on and I'll get the picture of the cable and the iTunes icon - which is what you get the first time you use your iPod touch and means it needs to be registered with iTunes. This will happen both if I plug it in to my charger and when I just simply turn it on with the power button. I'll then take the touch to my computer and use my syn cable and plug it in. When the iTunes window comes up, on the left column it shows my touch, but the name I'd given it has gone back to the default name. I'll rename it again, but again within a week or two the same thing happens again. I'm stumped. I'm using an iMac running Leopard 10.5.6 and a white MacBook, also with 10.5.6. All my software on the touch, MacBook and iMac are up to date. I have very few apps on my touch and lots of room left on it to store stuff. Can anyone help? Thanks.

Hi Brenda,
That screen, with the iTunes icon and the USB cable, means the iPod is in recovery mode.
This article: http://support.apple.com/kb/HT1808 provides more information about the mode and how-to use it to restore your iPhone or iPod touch.
Are you using any 3rd-party accessories with the iPod touch?
Does the accessory have the Made for iPod logo?
Try restoring the iPod again, setting it up as a new iPod, and testing it without any 3rd-party accessories.
If the issue persists, the iPod may need hardware repair. Just make a reservation to have a Genius take a look at it or call AppleCare.
http://www.apple.com/retail/geniusbar/
U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
-Jason

Ipad no longer 'registered' with my lap top

Hey guys. I recently had to send my lap top away to get repaired.Almost 4 weeks later i got it back...FORMATTED !!!. Now when i try to sync my ipad it tells me that it is no longer registered with this itunes account, when i try to sync i loose everything thats on it (4 weeks of apps downloads..bout 6 pages).I've tried everything but cant get it to sync with everything thats on it just now. do i have to re sync it loose everything, game saves etc and re download everything???

Did you authorize the computer in iTunes?
To authorize a computer using your Apple ID
Open iTunes
From the Store menu, choose Authorize This Computer. (In earlier versions of iTunes, access this option from the Advanced menu).
When prompted, enter your Apple ID and password, then click Authorize.
You can read the entire support article here.
http://support.apple.com/kb/ht1420

SMS in Yosemite messages not working. "Not registered with iMessage"

Just updated today to Yosemite. Macbook Pro 2013 (current retail model) with upgraded RAM and flash storage. iPhone 6 running 8.0.2 with recent back up to iCloud.
When sending iMessages to my normal iMessage contacts, everything is ok. This update should also allow for continuity with SMS, that they show up as Messages in the same application. I cannot get any messages which are not iMessages to send out. Each time I attempt this, I get the error "User is not registered with iMessage." Which, yes, duh. That's the point. I've sent and received SMS messages on my phone with out error, but still have not been able to initiate or respond on my Mac with Messages. My contact card only has the same phone number which is registered to the same iCloud account for both the phone and the Mac.
I've restarted the phone and logged in and out of iMessage in hopes of a refresh. I'm out of ideas as to how to get them to sync up, or whatever it is they need to do.
Is there a step that I am missing? It should, in theory, just work, but I can't find any messages on this. Any guesses?
Thanks!

Hi,
It seems that some people are experiencing issues with Logging in fully to the iMessages Servers from their Mac.
There is one Error Messages that is seen that is known to be very similar.
This Error can only be fixed by Contacting Support.
What is does prove though is the The Apple ID in use can be rejected on a Device by device basis, i.e. it will work on a iOS device or even another Mac but not on one particular one.
Sometimes deleting the Keychain item for the iMessages Login can help (then Restarting the app)
It is called IDS: yourApple ID- Auth Token
If deleting this does not work try repairing the Keychain.
After that I would contact Apple Support. You may have to speak to a Level 2 person as Level 1 people try to fit everyone into Software or hardware issues and charge for Out of time Apple Care.
Fixing and Apple ID/Account is free.
7:22 pm Tuesday; January 13, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Register with UCS Central - Stuck on Repair Cert Verify Guid

Similar Messages

Maybe you are looking for