Registering a program on the SAP gateway

Hi All
I have to setup an interface to an external application from SAP using ALE and IDocs. The external application needs to register an instance on the SAP gateway server. If this is complete then you only need to setup an RFC connection with a programID (The ID that is used in the gateway instance) and it will allow a connection between SAP and the external application.
The problem I am having is that I dont know how to register the external application on the SAP gateway. Can anyone help me with this problem?
Thank you.

Hi,
the below blogs may help you
Program ID in RFC destination-XI
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
- Satish

Similar Messages

Issue in registering program id to SAP gateway using JCO

Hi All,
In our java application we are registering a program id to SAP gateway so that we can listen the data sent from R/3 systems.
I need some basic information about the gateway registeration. I have following queries :-
1. If I register a program id, till what time this registeration remains in the R/3 system.
2. Is there any way to do the permanent registeration.
3. In our scenario we have clustered java server which is set up on a clustered OS. That means one java server is on one hardware machine and other java server is on another machine. Once we register a program id from one of the java server ,it
gets registered with that particular machine IP address. Now if one of the java server gets down ,other java server should start listening to SAP system. But this is not happening because our other java server is on another machine whose IP address is different and is not registered with SAP system.Is there any way to deal with this situation. One thing we could think of is to register all the machines permanently with SAP system. So that whichever machine gets down communication will not break.All the machines will remain registered in the R/3. But I am not sure how to do that.
Can anyone help me here.
Thanks and Regards,
Reena

1.) The registration remains active until you unregister it, or until the SAP gateway recognizes that the connection has been interrupted somehow. If there are multiple registrations of the same programID, this is valid for each single one. So one could say, that a programID's registration is valid as long as at least one registration is still valid.
2.) There is no such thing. What do you mean with permanent registration?
3.) You already gave the answer by yourself. Just register all RFC servers from all nodes simultaneously. The RFC requests will be dispatched to any of the nodes all the time. If one server node gets down, the connections to this particular server will be interrupted and it won't receive any RFC requests any longer.
And you don't know how to do that? Just start the RFC servers on all server nodes and they will register at the SAP gateway. I don't understand this question.

Program to list all include programs from the Sap program list

My requirement is to display all include programs from the Sap program Table ( D010INC table and TADIR table), From
here i have to get all include programs.Can anyone give the program code for this requirement

well, it's your requirement and not ours, so why not try yourself first?

Register Level programming of the AT-DIO-32HS

I am working with a piece of software that was written using the AT-DIO-32F card. The original programmer did NOT use the National Instruments driver with that card, but rather used a software library that allowed him to access and manipulate the registers directly on that board. The name of the library is called NTPORT (http://www.zealsoft.com/ntport/index.html). He did this because he was not able to meet the timing requirements using the NI driver.
We have to replace the AT-DIO-32F card with the AT-DIO-32HS card, and I would like to know if I can continue to do register level programming with the 32HS card. I have found that I also can not meet my timing requirements using the driver that comes along with the 32HS card.
I checked this web page (http://digital.ni.com/public.nsf/allkb/B08F4125A9325B3F862565CC0073E68F?OpenDocument), and did not find the AT-DIO-32HS listed. Does this mean I can not program its' registers ?
Any feedback would be appreciated !!
Thanks !!

Hi Raminta-
The Measurement Hardware Driver Development Kit (MHDDK) provides examples and register documentation for the 653x devices (which includes the AT-DIO-32HS). The DIO-32F and DIO-32HS devices are quite similar, so it is possible that your existing code will work. The resources on the MHDDK page should help you fill in any differences.
Thanks-
Tom W
National Instruments

Howto call/open a Windows program on the SAP client?

Hi all,
in an ABAP report I want to call a program that is installed on the client machine running the SAP GUI, optionally with a parameter. For example, on the client machine a program called "test" is installed, I want to call it from within my ABAP report with a paramter: "C:\program files\test\test.exe -param".
Any ideas how I can do this?
Thanks in advance for your help!
Kind regards, Matthias

you create a OS command using SM69 and you can use the Function module SXPG_COMMAND_EXECUTE or else
or You can use the method CL_GUI_FRONTEND_SERVICES=>EXECUTE
or else
Function GUI_EXEC.

Sending the email from the sap gateway

hi,
           Any body please help me how to send the email from the sap end. what is the funcion module used for that one what the parameters need to pass for that function module.

Hi, check if below code is helpful
Variables for EMAIL functionality
DATA: maildata   LIKE sodocchgi1.
DATA: mailpack   LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: mailhead   LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: mailbin    LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailtxt    LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailrec    LIKE somlrec90 OCCURS 0 WITH HEADER LINE.
DATA: solisti1   LIKE solisti1 OCCURS 0 WITH HEADER LINE.
PERFORM send_form_via_email.
      FORM SEND_FORM_VIA_EMAIL                                      *
FORM send_form_via_email.
CLEAR:    maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
REFRESH: mailtxt, mailbin, mailpack, mailhead, mailrec.
Creation of the document to be sent File Name
maildata-obj_name = 'TEST'.
Mail Subject
maildata-obj_descr = 'Subject'.
Mail Contents
mailtxt-line = 'Here is your file'.
APPEND mailtxt.
Prepare Packing List
PERFORM prepare_packing_list.
Set recipient - email address here!!!
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
APPEND mailrec.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = maildata
      put_in_outbox              = 'X'
    TABLES
      packing_list               = mailpack
      object_header              = mailhead
      contents_bin               = mailbin
      contents_txt               = mailtxt
      receivers                  = mailrec
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
ENDFORM.                    "send_form_via_email
     Form PREPARE_PACKING_LIST
FORM prepare_packing_list.
CLEAR:    mailpack, mailbin, mailhead.
REFRESH: mailpack, mailbin, mailhead.
DESCRIBE TABLE mailtxt LINES tab_lines.
READ TABLE mailtxt INDEX tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
Creation of the entry for the compressed document
CLEAR mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
APPEND mailpack.
mailhead = 'TEST.TXT'.
APPEND mailhead.
File 1
mailbin = 'This is file 1'.
APPEND mailbin.
DESCRIBE TABLE mailbin LINES tab_lines.
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'TXT'.
mailpack-obj_name = 'TEST1'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
APPEND mailpack.
*File 2
mailbin = 'This is file 2'.
APPEND mailbin.
DATA: start TYPE i.
DATA: end TYPE i.
start = tab_lines + 1.
DESCRIBE TABLE mailbin LINES end.
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = start.
mailpack-body_num = end.
mailpack-doc_type = 'TXT'.
mailpack-obj_name = 'TEST2'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
APPEND mailpack.
ENDFORM.                    "prepare_packing_list

Register level programing of the 6601 counter to connect signals to the rtsi bus

I have need for more than 4 clocks and have several 6601 counter boards. I would like to use an additional board for the extra clock but need to send signals to the this board from the other. The most efficent way seems to be to use the rtsi bus to connect the 2 boards together. I am programing the counter boards at the register level using a kernel module in linux. The register level porgramming manual explains how to connect different signals to the sourse pins of the clocks including the rtsi signals. I have been successful in doing this but can not find info on how to route the output signal of one clock to the input of another using the rtsi bus. Using web search I have seen ways to do this using labview and dqmx calls but nothing for programin at the register level. Thanks for any help on this problem.
Jerrv

Hi Jerry-
Ed's post here has some info that seems related to your question.
Tom W
National Instruments

Adding a BW Workbook to the SAP Gateway

Dear SDNers,
I am trying to assign a BW Workbook ("WB" report type) in the "Reporting Administration > Report settings > Manage reports and their properties" section of the Gateway, but the system doesn't recognize the tehcnical name...
Have you already experienced this issue?
Many thanks
Thibaud

Hi,
adding a value as default value for a variable is only relevant for the selection screen.
If u want to define # in the navigation pane u can do that there and save the workbook.
Then # is saved as filter on workbook lvl, but its changeable by the user.
Hint: In analysis mode disable "initial query view on refresh" in dataprovider settings of the analysis grid.
Regards
Tobias
P.S. Giving points is the way to say thx in SDN!!!
Edited by: Tobias on Jun 6, 2008 7:50 AM

Syntax error in the program in the "SAP LZTEST"

When executing Transaction Code VF01/VF02/VF03, it is not possible to create a billing document. it is showing the error like the above.
"The data object "ZASD_MAINT" does not have a component called "TIME_Z0" "NE".
Can you please help me in this issue ASAP.

Hello Eechaneri,
May some user exit or custom code is involved in here. Please get it checked by you developers. They would be able to help you out using debugging. ABAP dump analysis also wont be very helpful in this case unless you involve your developers here.
Regards.
Ruchit.

Registration of a Server Program in SAP Gateway

Hello Everybody,
Everyday while checking logs using T-Code SM21 I am getting the following error log and its description are as follows:
R49 Communication error, CPIC return code 002, SAP return code 679
R64 > CPI-C function: CMINIT(SAP)
Details
Recording at local and central time........................ 01.02.2008 02:36:28
Task................ 04756 / Background Processor No. 14
User................ HSSP1681
Client.............. 000
Terminal............
Session............. 1
Transaction code....
Program name........ RSLDAGDS
Problem class....... K SAP Web AS Problem
Development class... STSK
Further details for this message type
Module name......... thxxcpic
Line................ 3594
Error text.......... 002679
Caller.............. ThCPICS
Reason/called....... CPIC-Er
Documentation for system log message R4 9 :
A CPIC function has failed. The conversation ID and CPIC function are
specified in the system log entries. Use the conversion ID to find
more detailed information about the error in the system log for the SAP
gateway.
Technical details
File................ 000011
Position............ 0000134100
Entry type.......... m ( Error (Function,Module,Row) )
Message ID.......... R4 9
Variable parts...... 002679 ThCPICSCPIC-Erthxxcpic3594.
I had also referred the notes 353597 and 63930.
I had also Registered the Server Program :RSLDAGDS in SAP Gateway using T-Code: SM59 but while doing test connection it shows the following Error:
Connection error Error opening an RFC connection.
Detail Description of Error:
ERROR program RSLDAGDS not registered
LOCATION SAP-Gateway on host saptrng / sapgw00
DETAIL TP RSLDAGDS not registered
COMPONENT SAP-Gateway
COUNTER 778
MODULE gwr3cpic.c
LINE 1609
RETURN CODE 679
SUBRC 0
RELEASE 640
TIME Fri Feb 01 09:35:19 2008
VERSION 2
Please suggest the solution and steps to solve the above mentioned Error in my Development System.
Thanks and Regards,
Ashish Thakkar.

Hi Vincent,
          I had alreadry referred the Note:353597 and created the RFC connection for program "RSLSAGDS" but while testing the connection it shows the following error:
ERROR                program RSLDAGDS not registered
LOCATION             SAP-Gateway on host saptrng / sapgw00
DETAIL               TP RSLDAGDS not registered
COMPONENT            SAP-Gateway
COUNTER              8105
MODULE               gwr3cpic.c
LINE                 1609
RETURN CODE          679
SUBRC                    0
RELEASE              640
TIME                 Mon Feb 04 02:43:46 2008
VERSION              2
I wanted to know what should I define in Program ID while creating a connection for program "RSLDAGDS" as in my System only registered Program ID is IGS.SBX.
Thanks and Regards,
Ashish Thakkar.

How to find the Values of SAP Gateway Server Host and Gateway Service Valu

Hi All,
I installed SAPR/3 4.7 EE on Windows. For configuring SLD and LDAP i am unable to give the SAP Gateway Server Host and Gateway Service values.
Can any one plz suggest me how to find these values.
Regds
Phanikumar

Hello, SAP Gateway Server Host and Gateway Service are used to set up rfc connectivity, that is the host name and the system number where your sld and ldap is responding, if you have no sld and no ldap , just simply uncheck that options while installing.
Have a nice week end, Luciano.

Deploying SAPUI5 applications on SAP Gateway as the application server

Hi,
We are just trying to ramp up on Fiori architecture and utilizing SAP netweaver gateway in combination with SAPUI5 to build new generation user interfaces.
Most of the demos and tutorials I see involve utilizing the SAP netweaver gateway as the oData services provider with the UI components hosted on a separate web server like Apache. Looking at Fiori apps, it looks like they utilize the SAP gateway as the web server itself, without having the need of a separate web server.
Are there some instructions and guidelines for porting a SAPUI5 UI application (UI components) on to the SAP Netweaver gateway, similar to how Fiori does?
thanks,
Nitin

Hi Neeta,
You would need to consider additional factors to make that decision. Primary of which is what is the landscape being used by your customer. You have to consider things like how the users will access the app? What would be the security and authentication mechanism? Would you need reverse proxies or load balancing? Does the customer already have an existing infrastructure for web based applications which you should plug into?
First off, I will assume you have a NW Gateway system in place for the services that are being used by the SAPUI5 app. If that is the case, then you can certainly deploy the UI app on the same server. The process described in the blog above would end up creating a BSP application, which can then be captured in a transport and moved to QA/Production.
On the other hand, if your customer has already has an existing infrastructure for hosting and serving up Web based applications, you may want to leverage that existing infrastructure instead.
You can get in touch with me if you would like to discuss further.
thanks,
Nitin

How to register a program in satgateway?

Hello colleagues,
I am trying to test a remote function call.
steps to error:
1) sm59--> ACTIONPAD_TCPIP_J2EE
2)Press "Conenction test " button .
Now i got the below error:
Logon     Connection Error
Error Details     Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67
Error Details     ERROR: program BTM_RTMF_NOTIFICATION not registered
Error Details     LOCATION: SAP-Gateway on host vaci<sid>.wdf.sap.corp / sapgw00
Error Details     DETAIL: TP BTM_RTMF_NOTIFICATION not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 20664
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1693
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 711
Error Details     TIME: Mon Dec 13 10:16:21 2010
Error Details     VERSION: 2
In smgw i have checked the registered programs through the goto->logged clients
In the registered programs the above mentioned program is not registered. This is the reason for the error.
Solution i have tried:
Tried to register the current program using the below command
--> ./rfcexec -a BTM_RTMF_NOTIFICATION -g vaci<sid> -x sapgw00
./rfcexec: Command not found.
In the system i have seacrhed throughly as rfcexec file is not existed.
but nearly one year back i have tried this same command and executed it.
Now it is not working.. could you please provide solution to register the program in sapgateway.
Thanks and Regards,
Siva

Hi,
If BTM_RTMF_NOTIFICATION is an RFC server program, you don't have to use rfcexec.exe.
rfcexec.exe is an RFC server standard SAP exemple program. It may be used to start scripts on a distant server but it is usually a bad solution because the registration is lost after each restart of the SAP backend system.
If the RFC Server program is not able to re register automatically in cas of a SAP beckend restart, one possible solution is to install a SAP standalone Gateway on the external server and to register the RFC server program on the standalone gateway.
You, then, define the RFC destination to use the standalone gateway.
Regards,
Olivier

No ehs management server is currently logged on at SAP Gateway

Hi,
I have installed EHS management server and WWI server on a separate server. The RFC between ECC Dev to WWI server is running fine. The ECC Dev server is able to call the registered program on SAPRFC.ini.
But when I run TCD CGSADM notthing is coming up and it throws error as "No ehs management server is currently logged on at the sap gateway".
I have checked and done whatever was required as per the sapnote 839750, 580586, but still CGSADM is not working.
Also in SMGW i can see the EHS server as Remote Gateway.
Kindly let me know how to rectify the Issue.
Thank You!

Hello
I am facing similar issue, could you please let us know if you found any solution.
Thank You.

Register system r3 in the portal transaction rz70

Please helpme.
I have a problem, I need register my system r3 in the portral but I can´t
The follow is the error
Error when opening an RFC connection
ERROR: file communicate with gateway SAP ¿ Gateway SAP started.
In the potal sld I put this parameters
Sldprofilesection all--
GatewayHost (datasupplier): localhost portal
GatewayService (datasupplier): sapgw01 with 01 id instance.
Object Server (Server Settings): Ii put name instance abap.
inthe rz70 i put.
Gateway Host HOSTNAME PORTAL
Gateway service sapgw01
But the error continue.

Hi,
When registering an ABAP based system to SLD, there also needs to be an RFC connection setup on ABAP side to connect to the SAP Gateway service on the J2EE system with SLD.
Hope you have the RFC connection setup fine and working.
Can check below help on setting up ABAP systems in SLD.
Link: [http://help.sap.com/saphelp_nw70/helpdata/en/8a/361fb70681234fb7d3af841ec2383e/frameset.htm]
Thanks,
Swapna Priya.

Registering a program on the SAP gateway

Similar Messages

Maybe you are looking for