Registration of 11.2 database fails against 12.1 CRS

I am not able to register the database with 12cR1 CRS . Gettting the error as follows,
bash-3.2$ /opt/oracle/product/11.2.0/db3/bin/srvctl add database -d 11gr2tstdb -o /opt/oracle/product/11.2.0/db3
PRCR-1006 : Failed to add resource ora.nishtest.db for nishtest
PRCD-1184 : Failed to upgrade configuration of database type to version 11.2.0.3.0
PRCR-1071 : Failed to register or update resource type ora.database.type
CRS-0245: User doesn't have enough privilege to perform the operation

bash-3.2$ /opt/oracle/product/11.2.0/db3/bin/srvctl add database -d 11gr2tstdb -o /opt/oracle/product/11.2.0/db3
PRCR-1006 : Failed to add resource ora.11gr2tstdb .db for 11gr2tstdb
PRCD-1184 : Failed to upgrade configuration of database type to version 11.2.0.3.0
PRCR-1071 : Failed to register or update resource type ora.database.type
CRS-0245: User doesn't have enough privilege to perform the operation
Error:
   CRS-0245: User doesn't have enough privilege to perform the operation
Analyze:
# ./crsctl status type ora.database.type -p | grep DEFAULT_VALUE=owner
DEFAULT_VALUE=owner:root:rwx,pgrp:dba:rwx,other::r--,group:dba:r-x,user:oracle:r-x
Problem:
   USer oracle doesnot have permission to add the oracle resource
Solution
   As a Root user run the following commands
./crsctl modify type ora.database.type -attr "ATTRIBUTE=TYPE_ACL, DEFAULT_VALUE='owner:root:rwx,pgrp:dba:rwx,other::r--,group:dba:r-x,user:oracle:rwx'"
./crsctl modify type ora.service.type -attr "ATTRIBUTE=TYPE_ACL, DEFAULT_VALUE='owner:root:rwx,pgrp:dba:rwx,other::r--,group:dba:r-x,user:oracle:rwx'"
   Then try starting the databases.

Similar Messages

Essbase Product Existence Check Fails against the Shared Services Server

Hello Everyone,
I am a new to Essbase
When I am launching the EAS web console and trying to log in, its giving me an error saying "Could not connect to Administration Server".
I looked in ESSBASE log file its showing an error 1051429 : "Essbase Product Existence Check Fails against the Shared Services Server with Error []"
This error actually started when I copied an Essbase Application from one of my computers to another computer. All I simply did is copied the application folder into "app" folder. I am not sure if migration
is possible just by copying and pasting the application folders. I am not sure if doing this messed up security with shared services. Also under c:\hyperion\essbase folder I see another text file named "SharedServices_Security_Client".
Its log for today is below:
2011-11-03 19:36:15,375 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:36:15,531 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:36:15,531 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:36:15,531 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 19:36:18,531 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:36:45,531 ERROR [main] 20:1092:Failed to initialize EPM System registry. [Root Cause: hyperion.jdbc.base.BaseSQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:36:45,531 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\, com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:36:45,531 INFO [main] CSS system intialization failed. : [44156 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:44:14,765 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:44:14,781 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:44:14,781 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:44:14,781 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 19:44:14,828 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:44:16,265 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:44:16,796 INFO [main] Got hub location from Registry:http://chandan:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2011-11-03 19:44:16,953 INFO [main] Got native directory location from Registry:chandan:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2011-11-03 19:44:16,953 INFO [main] URL constructed out of values in Registry database:ldap://chandan:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2011-11-03 20:02:47,687 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:02:47,859 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:02:47,859 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:02:47,859 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:02:48,328 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:03:08,921 ERROR [main] 20:1092:Failed to initialize EPM System registry. [Root Cause: hyperion.jdbc.base.BaseSQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:03:08,921 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\, com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:03:08,921 INFO [main] CSS system intialization failed. : [63140 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:05:37,390 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:05:49,875 ERROR [main] 20:1092:Failed to initialize EPM System registry. [Root Cause: hyperion.jdbc.base.BaseSQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:05:49,875 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\, com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:05:49,875 INFO [main] CSS system intialization failed. : [12625 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:06:42,890 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:06:45,359 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:06:47,218 INFO [main] Got hub location from Registry:http://chandan:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2011-11-03 20:06:48,250 INFO [main] Got native directory location from Registry:chandan:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2011-11-03 20:06:48,265 INFO [main] URL constructed out of values in Registry database:ldap://chandan:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2011-11-03 20:07:17,359 ERROR [main] 80:6007:Failed to load SAP certificate from keystore at SAP.keystore. Ignore if SAP provider is not configured.[Root Cause: Invalid keystore format ] com.hyperion.css.SAPSecurity.loadSAPCertificate(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:10:13,000 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:10:14,265 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:10:14,671 INFO [main] Got hub location from Registry:http://chandan:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2011-11-03 20:10:14,812 INFO [main] Got native directory location from Registry:chandan:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2011-11-03 20:10:14,812 INFO [main] URL constructed out of values in Registry database:ldap://chandan:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2011-11-03 20:10:15,234 ERROR [main] 80:6007:Failed to load SAP certificate from keystore at SAP.keystore. Ignore if SAP provider is not configured.[Root Cause: Invalid keystore format ] com.hyperion.css.SAPSecurity.loadSAPCertificate(Unknown Source)
I dont know how to resolve this.
Please Help
Thank you

From the log
Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect
The SQL server itself is not running or TCP/IP is disabled. That can be confirmed by runing netstat and see it is listed there.
Then run telnet chandan 1433 and see it can connect
To enable the TCP refer to this link
Re: error establishing socket to host and port: EPM11:1433

CMC initialization of the GroupWise domain database failed (d705)

I am trying to run a newly installed Webaccess agent against a new
domain. I have been following The Caledonia Guide to Moving GroupWise. I
am running SLES 10 SP3 and GW 8.2 HP2. I created the domain, installed
the MTA and I am running that in a GUI to test. Everything looks fine
there. I install the GW Webaccess agents and configure them. Still
everything looks fine. When I run ./gwinter --show @webac80al.waa &, I
get the following error.
"GWINTER: CMC initialization of the GroupWise domain database failed (d705)
GWINTER: CMC is shutting down...
GWINTER: CMC is shut down
GWINTER: Terminating WeAccess Server"
I am running it as root.
Has anyone seen this before?
Thanks,
Dan

On 2/18/2011 5:37 AM, Dan wrote:
> I am trying to run a newly installed Webaccess agent against a new
> domain. I have been following The Caledonia Guide to Moving GroupWise. I
> am running SLES 10 SP3 and GW 8.2 HP2. I created the domain, installed
> the MTA and I am running that in a GUI to test. Everything looks fine
> there. I install the GW Webaccess agents and configure them. Still
> everything looks fine. When I run ./gwinter --show @webac80al.waa &, I
> get the following error.
>
> "GWINTER: CMC initialization of the GroupWise domain database failed (d705)
> GWINTER: CMC is shutting down...
> GWINTER: CMC is shut down
> GWINTER: Terminating WeAccess Server"
>
> I am running it as root.
>
> Has anyone seen this before?
>
> Thanks,
> Dan
Usually IIRC it means gwinter does NOT have access to your domain.
Provide more information - the domain is local to the webaccess, right?
what does webac80a1.waa show?

Error message: "Querying or saving changes to the database failed."

Hi all,
I can sense I'm becoming a regular on this particular forum - the problem of spending 8 hours a day trying to get this software working!
_*The problem*_
When i try and setup a new device, or modify an existing one, I get an error message when i get to the Transcode Settings page. The error message is "Querying or saving changes to the database failed." After this I get a blank screen and can no longer see my settings.
No amount of restarting has fixed this. And I cannot see a way to create a device through the client software and add transcode settings.
Help?
Thanks in advance,
Ben

Ah very good!
Ok - it seems then that this works absolutely fine as a work around. I can create a device and then assign the device to transcode settings through the client adminsitration panel (which is indeed what I meant).
So, there is a work around. Far less pressing now, but I would like to know why I'm getting the error message all the same - I'm now concerned about the integrity of the database...
Thanks Tony!
B

[svn] 3722: Bug: BLZ-260 - Error message for a legacy =3. 0 client poll failing against a =3.1 server is unclear

Revision: 3722
Author: [email protected]
Date: 2008-10-17 14:04:59 -0700 (Fri, 17 Oct 2008)
Log Message:
Bug: BLZ-260 - Error message for a legacy <=3.0 client poll failing against a >=3.1 server is unclear
QA: Yes
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-260
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
blazeds/trunk/modules/core/src/flex/messaging/FlexSession.java
blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.java

your problem:
Missing class: oracle.tip.adapter.jms.JmsManagedConnectionFactory
Dependent class: oracle.tip.adapter.fw.wsdl.WSDLUtils
Loader: oracle.bpel.common:10.1.3
Code-Source: /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar
Configuration: <code-source> in /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml
It happens when server is custom installed, try to reinstall it as full version and problem should disappear otherwise your need another full installation to retrieve and replace orabpel.jar file from (or maybe more)

Connect to database failed,rc=-10709 Connection failed (RTE:Database name)

Hi gurues, I'm facing this issue with an IDES on MaxDB with Windows.
System was up and running until someone tries to make an upgrade of the kernel. Since then we can not start our system. we tried to rollback kernel release to the previous one but it didn't work.
When we start our system from MMC console we can see all process in green but work processes are in RUN state and after a few minutes they goes down with the following error
trc file: "dev_w0", trc level: 1, release: "701"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Mon May 16 23:57:31 2011
B create_con (con_name=R/3)
B Loading DB library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
B Library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' loaded
B Version of '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' is "700.08", patchlevel (0.24)
B New connection 0 created
M sysno      00
M sid        SED
M systemid   562 (PC with Windows NT)
M relno      7010
M patchlevel 0
M patchno    32
M intno      20020600
M make:      multithreaded, Unicode, 64 bit, optimized
M pid        212
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 212) [dpxxdisp.c   1348]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          22784     (1752)
M DpShMCreate: sizeof(tm_adm)          5912704     (29416)
M DpShMCreate: sizeof(wp_ca_adm)          24064     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm)          552080     (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)          0     (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1864)
M DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000B2C0050, size: 6607136)
M DpShMCreate: allocated sys_adm at 000000000B2C0050
M DpShMCreate: allocated wp_adm at 000000000B2C2270
M DpShMCreate: allocated tm_adm_list at 000000000B2C7B70
M DpShMCreate: allocated tm_adm at 000000000B2C7BD0
M DpShMCreate: allocated wp_ca_adm at 000000000B86B450
M DpShMCreate: allocated appc_ca_adm at 000000000B871250
M DpShMCreate: allocated comm_adm at 000000000B873190
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000B8F9E20
M DpShMCreate: allocated gw_adm at 000000000B8F9EA0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000B8F9ED0
M DpShMCreate: allocated wall_adm at 000000000B8F9EE0
M
M Mon May 16 23:57:32 2011
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host sirillium1
M
M Mon May 16 23:57:33 2011
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.024) Default value for max. input variables is 2000 (note 655018)
C    (0.024) Profile parameter to define max. input variables (note 655018)
C    (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C    (0.024) Input parameters for SQL statements increased (note 655018)
C    (0.018) Create index serial for MaxDB 7.6 (note 1267841)
C    (0.018) More trace in case of packed to string conversion error (note 1262799)
C    (0.016) R3trans export aborts with signal 6 (note 1262245)
C    (0.009) IA64 alignment errors (note 1245982)
C    (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0    BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.5    BUILD 015-123-202-938
C SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data   : 1
C SQLDBC supports keepAlive indicator   : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#2 @ 1203] [dbsh    1203 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10563]
M
M Info for wp 0
M
M    pid = 212
M    severity = 0
M    status = 0
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server sirillium1_SED_00 on host sirillium1 (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Mon May 16 23:57:33 2011
M * RELEASE     701
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10783
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 212) [dpnttool.c   334]
We check several entries on this SDN site, and look for a lot of notes on the marketplace, and they always are related to default user in xuser files, but our xuser list output is ok. We have a DEFAULT connection to SAPSID user, a DBM connection to CONTROL user and a USERDBA connection.
XUSER Entry 1
Key         :DEFAULT
Username    :SAPSID
UsernameUCS2:S.A.P.S.E.D. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset     :<unspecified>
XUSER Entry 2
Key         :c
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :INTERNAL
Cachelimit :-1
Timeout     :-1
Isolation   :-1
Charset     :<unspecified>
XUSER Entry 3
Key         :c_J2EE
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset     :<unspecified>
XUSER Entry 4
Key         :w
Username    :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :INTERNAL
Cachelimit :-1
Timeout     :-1
Isolation   :-1
Charset     :<unspecified>
Any idea? we are out of ideas at this moment.
Regards
Edited by: Gustavo Goicochea on May 17, 2011 6:37 PM

Natalia, this system was not resored nor copied, it was up and running before kernel update. We did some of the tests you said and someothers, here are some outputs.
We update kernel to release 142
R3trans -d and -x exit with (all with user SIDADM)
SVERS table does exist and belongs to SAPSID
dbmcli on SID>sql_execute select * from domain.tables where tablename='SVERS'
OK
END
'SAPSID';'SAPSID';'SVERS';'';'TABLE';'TABLE';'20100406';'00054637';'20100406';'00054637';'20100406';'00054638';'NO';(null);20000;(null);x'0000000000004842';'NO';'NO';'YES';'NO';(null)
Why it still says that SVERS table does not exist and SQL error 942?
C Now I'm connected to SAP DB
C 00: server1-SID, since=20110518015619, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C *** ERROR =>   prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS) [
dbsdbsql.cpp 1604]
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS) [dbslsdb.cpp 7253]
C sc_p=000000000CFAECC0,no=0,idc_p=0000000000000000,con=0,act=0,slen=34,smax=256,#vars=0,stmt=0000000002EA0AF0,table=SVERS
C SELECT VERSION INTO ? FROM SVERS ;
B ***LOG BZA=> table SVERS      does not exist on database            [dblink#4 @ 1301] [dblink 1301 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1515]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10824]
M
Users seem to be ok
dbmcli on SID>sql_execute SELECT username, usermode FROM users
OK
END
'CONTROL';'ADMIN'
'SUPERDBA';'SYSDBA'
'SAPSID';'DBA'
'SAPR3';'DBA'
User SAPR3 does not have anything on database
dbmcli on SID>sql_execute select * from domain.tables where owner='SAPR3'
ERR
-24988,ERR_SQL: SQL error
100,Row not found
Any idea?
regards

Error in /tmp/applianceagent/scripts/Database.sh: Start database failed with exit code 2

Hello
I have set up the Demo appliance landscape for the openSAP course "Introduction to SAP Fiori UX", on AWS.
The frontend machine is OK, but the configuration and startup of the server machine has failed for some reason. When logging in with ssh to the server, this message is presented:
The Appliance Agent detected an error and terminated.
When asked, please provide the file /tmp/applianceagent_20141002-145658.tar.bz2.
Note that a restrictive iptables based firewall is still active.
I have attached the file (had to add .txt to the name to circumvent file type restrictions).
I noticed that the appliancedeploy.log ended with these lines:
Start database Execute /usr/sap/hostctrl/exe/sapcontrol -nr 02 -function StartWait 3600 20
02.10.2014 13:56:58
Start
OK
02.10.2014 14:56:58
StartWait
FAIL: Timeout
error in /tmp/applianceagent/scripts/Database.sh: Start database failed with exit code 2
Notice the 1 hour jump in time, and then the timeout error message.
Do any of you have any idea what could be causing this, and how to fix it?
Please let me know if you need any further information.
Best regards,
Bo

Hi Hannes.
Trying to create and activate a new instance (version 5 of the Fiori appliance), I first got this message in the CAL instance overview list:
Instance Operation Failed
Operation Start failed on step Start start VAs with message: Start failed for VM SAP Server due to Amazon Web Services issue : AMAZON : The snapshot 'snap-c779ff64' does not exist.
Then I terminated the instance and tried over again. And this time the deployment worked - I have a running server, which responds to the SAP GUI, and shows the Fiori web page.
Thanks a lot for your quick help.
Best regards,
Bo

Constant failures in setting up scalable wordpress. Update ClearDB database failed.

I've been having Constant failures in setting up scalable wordpress with no luck on finding a fix.
Update ClearDB database failed is the most common issue, with Update deployment being the second issue. I though maybe it had to do with Azure changes over the last few months (beta portal), but have yet to successfully deploy a site.
Any suggestions / fixes would be greatly appreciated.
Also, i've tried utilizing the support link but it seems to hang perpetually (regardless of browser) when checking my subscription.

Hi,
Two points need confirmed:
1.Have you already purse the ClearDB database?
2.What's error did you encounter when you scalable WP site?
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Connection test to database failed: could not connect to server

I restarted one of my HPOV NNMi 9.23 servers this morning and NNMi is no longer loading. I am seeing the following errors in the logs indicated:
/var/opt/OV/log/nnm/public/nmsdbmgr.log
04/06/2015 09:28:05 AM Connection test to database failed: could not connect to server: Connection refused
Is the server running on host "127.0.0.1" and accepting
TCP/IP connections on port 5432?
/var/opt/OV/log/nnm/public/postgres.log
2015-04-06 09:25:55.312 EDT: :8580:0LOG: could not translate host name "localhost", service "5432" to address: Name or service not known
2015-04-06 09:25:55.312 EDT: :8580:0WARNING: could not create listen socket for "localhost"
2015-04-06 09:25:55.312 EDT: :8580:0FATAL: could not create any TCP/IP sockets
I checked /etc/hosts and found the following entry:
#; Local
127.0.0.1 localhost
From the command line I can ping localhost with no issue. Not sure why NNMi is not starting at this point.
This question was solved.
View Solution.

I also attempted to do a reset using nnmresetebdb.ovpl. I recieved the following:
Attempting to reset the embedded database...
Starting nmsdbmgr process for database reset...
nmsdbmgr process did not restart successfully - please try reset again.
When I run ovstart -c I receive the following:
Name PID State Last Message(s)
OVsPMD 29831 RUNNING -
pmd 29832 RUNNING Initialization complete.
nmsdbmgr - NOT_RUNNING - Exit(1)
ovjboss - UNSTARTABLE -
nnmaction - UNSTARTABLE -
ovspmd: Attempt to start HP OpenView services is complete.
I definitely need some help with this please!
Thanks!

Attached database failed for sever "blah". (Microsoft.SqlServer.Smo)

===================================
Attach database failed for Server 'DENR-HP'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600.1+((KJ_RTM).100402-1539+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
Program Location:
at Microsoft.SqlServer.Management.Smo.Server.AttachDatabase(String name, StringCollection files)
at Microsoft.SqlServer.Management.SqlManagerUI.AttachDatabaseData.PrimaryFile.Attach()
at Microsoft.SqlServer.Management.SqlManagerUI.AttachDatabase.SendDataToServer()
===================================
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Program Location:
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(StringCollection sqlCommands, ExecutionTypes executionType)
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCollection queries)
at Microsoft.SqlServer.Management.Smo.Server.AttachDatabaseWorker(String name, StringCollection files, String owner, AttachOptions attachOptions)
at Microsoft.SqlServer.Management.Smo.Server.AttachDatabase(String name, StringCollection files)
===================================
The database 'PlanningDB' cannot be opened because it is version 655. This server supports version 611 and earlier. A downgrade path is not supported.
Could not open new database 'PlanningDB'. CREATE DATABASE is aborted. (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=948&LinkId=20476
Server Name: (local)
Error Number: 948
Severity: 20
State: 1
Line Number: 1
Program Location:
at Microsoft.SqlServer.Management.Common.ConnectionManager.ExecuteTSql(ExecuteTSqlAction action, Object execObject, DataSet fillDataSet, Boolean catchException)
at Microsoft.SqlServer.Management.Common.ConnectionManager.ExecuteTSql(ExecuteTSqlAction action, Object execObject, DataSet fillDataSet, Boolean catchException)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)

Hi,
As Olaf’s post, you cannot restore or attach a database which is created from a higher version of SQL Server to a lower version of SQL Server.
However, there are some ways which can help you to move a database to a lower version of SQL Server. I recommend you to use Generate Scripts Wizard of SQL Server Management Studio (SSMS), you can script all the database objects in SQL Server 2008, then run
the SQL scripts in SQL Server 2005, for more details, you can follow the steps in this blog:
How to migrate a SQL Server database to a lower version. Also you can try to use the Import and Export Wizard to move database from SQL Server 2008 to SQL Server 2005,for more details, please review this article:
How to: Run the SQL Server Import and Export Wizard.
Thanks
Lydia Zhang

(2008 R2) AD RMS Installation Failure: ALTER DATABASE failed because a lock could not be placed on database

First-time install on a SBS 2011 server, name replaced as <SERVER> for this post. I had created a separate IIS site rather than using the Default Web Site and I am guessing this might be a permission issue on the folder...
Installation failed with Event ID 110 and a repeating error that states, "<Error>: Attempt to configure Active Directory Rights Management Server failed. The provisioning process failed to create the Configuration database due to the following
error from Sql Server: System.Data.SqlClient.SqlException: ALTER DATABASE failed because a lock could not be placed on database 'DRMS_Config_adrms_<SERVER>_local_443'. Try again later. ALTER DATABASE statement failed. ALTER DATABASE failed because a
lock could not be placed on database ." Configuration as follows:
<Informational>: This server might need to be restarted after the installation completes.
Active Directory Rights Management Services
Cluster Type
Root cluster
Trust Hierarchy
Production
Configuration Database Server
Windows Internal Database
Service Account
<SERVER>\adrms
Cluster Key Storage
AD RMS centrally managed key storage
Cluster Web Site
Active Directory RMS
Cluster Internal Address
https://adrms.<SERVER>.local:443/
SSL Certificate
Create a self-signed certificate
Licensor Certificate Name
<SERVER>
Register SCP
Register now

Hi Ahmad, I have the same problem, I have a server windows server 2008 R2 standard. While
doing an Enterprise to Standard downgrade, I have removed enterprise edition of SQL Server 2008, rebooted and while installing standard edition, I get the below error saying "You SQL server 2008 installation completed with failures. Some or all identity
references could not be translated"
Bit of background. This server has another express instance of SQL Server 2008. I have
used local system account, network service as well as our general SQL service account, but I get the error towards the end of the installation and it fails saying “Some or all identity references could not be translated.”
I am installing a named instance with the same name as before but fails. I have tried
creating a new test instance that fails too. Any ideas? I have uninstalled SQL enterprise edition from
Add and Remore Programs/Programs and Features. I've also run the Windows Installer CleanUp Utility but no joy.
Cheers

9.2 create Database fails in sql.bsq

I have installed Oracle 9.2.0.1.0. It appears to have installed correctly.
I am attempting to create a new database. The script sql.bsq in %ORACLE_HOME%\rdbms\admin appears to be trying to create a cluster around line 1329. I don't use clusters (per se).
I am rcving an the following error a trace file.
*** SESSION ID:(10.1) 2003-09-08 16:59:56.000
ORA-00604: error occurred at recursive SQL level 1
ORA-01569: data file too small for system dictionary tables
Offending statement at line 1332
create cluster c_cobj# (obj# number)
pctfree 0 pctused 50
/* space for: update cdef$ set condition = 'col IS NOT NULL' at // */
size 300
storage (initial 50K) /* avoid space management during IOR I */
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 1332
ORA-00604: error occurred at recursive SQL level 1
ORA-01569: data file too small for system dictionary tables
Can someone point me to an answer for this?
I have 2 95MB files being created in the system tablespace. and I can provide you either my create database script and/or my init.ora file, if they will assist.
Thnak you

Thank you.
I have changed the create database statement several times to try different possiblities.
I have put maxsize unlimited. That failed.
I have put maxsize 200M (with a second file of maxsize 200M) that failed.
I have added the temp storage syntax. That failed.
All of these failed in sql.bsq and all used the ORA 1569 error about a data file being too small.
WHAT DATA FILE? The system tablespace data file(s) have never been increased (by Oracle) from the original size value I provided (whether that size was 500K, or 95M). So what data file is Oracle complaining about?
In addition, I have seen the following message in the alert_project.log:
========================================
Assigning activation ID 2846189359 (0xa9a5672f)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: D:\DATA\ORACLE\ORADATA\BURKE\LOGS\LOGFILE1.LOG
Current log# 1 seq# 1 mem# 1: D:\ORACLE\ORADATA\BURKE\LOGS\LOGFILE1.LOG
Successful open of redo thread 1.
Tue Sep 09 11:42:39 2003
SMON: enabling cache recovery
Tue Sep 09 11:42:39 2003
create tablespace SYSTEM datafile 'd:\data\Oracle\oradata\burke\system01.dbf' size 500K REUSE
autoextend on next 500K maxsize 200M,
'd:\data\Oracle\oradata\burke\system02.dbf' size 500k REUSE
autoextend on next 500K maxsize 200M
default storage (initial 10K next 10K) EXTENT MANAGEMENT DICTIONARY online
Tue Sep 09 11:42:39 2003
Completed: create tablespace SYSTEM datafile 'd:\data\Oracle
Tue Sep 09 11:42:39 2003
create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Completed: create rollback segment SYSTEM tablespace SYSTEM
Tue Sep 09 11:42:40 2003
Errors in file d:\data\oracle\admin\burke\udump\project_ora_1324.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-01569: data file too small for system dictionary tables
========================================
The line that says
default storage (initial 10K next 10K) EXTENT MANAGEMENT DICTIONARY online
is not in my create database statement. Can it be a portion of my problem?
I don't see it in the 9.2 SQL manual for create database.
I appreciate the assistance that has been provided, but I still need some more.
Thanks you all again.

Primary Mailbox Database fails to replicate after failing over to secondary copy in DAG

We had an issue yesterday on a primary mailbox database server when the drive the log files are located on filled up and took the databases off-line on the primary server bringing them up on the secondary.
After the issue was resolved and enough space was freed up, all but one database failed back. The one that would not come back showed Failed in the copy status. It remained mounted on the secondary server. I attempted several times to 'update' the copy and
it would run for aver 40 minutes and look like it was going okay then it would 'fail' and end up in a 'failed and suspended' state. The error would indicated it could not complete because the it could not find the source server.
The Update job was configured to point to the server holding the secondary copy as the source so should not have a problem.
Any idea on how I can get the primary copy working again? I thought about making the second copy the 1st to activate and removing the primary copy from the DAG and recreating it, but past experience doing that did not resolve the issue.
Thank you,
Nick
Nick Laurino

Find out why database file is missing, I doubt on antivirus and start looking at the antivirus sacanning exclusion to ensure it is properly set...
File-Level Antivirus Scanning on Exchange 2010
Then try to reseed the database copy from a good source, it might be possible that antivirus would be scanning file when it is getting reseeded and causing issue...
How to Reseed a Failed Mailbox Database Copy in Exchange Server 2010
Blog |
Get Your Exchange Powershell Tip of the Day from here

Bea weblogic 6.1 does not oracle Database fail over

Hi We had Concurrency Strategy:excusive . Now we change that to Database for performace
reasons. Since we change that now when we do oracle database fail over weblogic
6.1 does not detect database fail over and it need restart.
how we can resolve this ??

mt wrote:
Hi We had Concurrency Strategy:excusive . Now we change that to Database for performace
reasons. Since we change that now when we do oracle database fail over weblogic
6.1 does not detect database fail over and it need restart.
how we can resolve this ??Are your pools set to test connections at reserve time?
Joe

Analytical Services Application Existence Check Fails against the SSH

Hi guys,
     We have a problem in Essbase 9.3.0.1. Some time, when we try to start the Essbase Server, is not possible to complete the startup sequence with the following error in Essbase.log:
[Fri Jan 23 01:38:54 2009]Local/ESSBASE0///Error(1051417)
Analytical Services Application Existence Check Fails against the Shared Services Server with Error []
     After check the Shared Services log, we receive this message:
     “23 Jan 2009 05:30:47 - org.apache.slide.store.impl.rdbms.StandardRDBMSAdapter - ERROR - SQL error 0 on /1222000912577.1: Connection is closed.
605779961 [ExecuteThread: '4' for queue: 'weblogic.kernel.Default'] ERROR cms.CMSFacade - org.apache.slide.common.ServiceAccessException: Service org.apache.slide.store.impl.rdbms.JDBCStore@1794494 access error : Connection is closed.
605779961 [ExecuteThread: '4' for queue: 'weblogic.kernel.Default'] WARN cms.CMSFacade - GetUsers() - Skipping User
com.hyperion.eie.common.cms.CMSException: error.UnableToGetNodeRevisionDescriptor”
I tried to start Essbase Server many times, but only after restart Shared Services was possible to start Essbase Server with success.
     I checked the connectivity with OpenLdap (through LDAP Browser), Shared Services repository (through SQL*Plus), Shared Services and MSAD Provider and everything is OK.
     Our environment is:
Sun Solaris 9:
Shared Services 9.3.0.1
Analytic Administration Services 9.3.0.1
Planning 9.2.0.3
BI+ 9.2.0.3
IBM AIX 5.3
Analytic Services 9.3.0.1
Oracle 10.2.0.4
WebLogic 8.1.4
External Authentication: MSAD
I found some topics with errors alike, but without a solutions. I am with a Service Request in Oracle Support but they could not find a reason to this yet.
Thanks !

What is the solution to the problem.How did you resolve it.

Registration of 11.2 database fails against 12.1 CRS

Similar Messages

Maybe you are looking for