Registry Key / Setting to decrease the work folders client polling interval from 10 minutes

Hi,
We would like to be able to decrease the interval that the Work Folders client checks for SMB updates on the our Work Folders server. We have reduced the time limit on the server successfully via powershell, but the client can still take around 10 minutes
before it check with the server for updates. We have found a reg key:
Reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WorkFolders /v PollingInterval /t REG_DWORD /d 5
From:
http://www.networksteve.com/?p=7929
But this key does not appear to have any effect. Does it still work? Is there a alternative? We are using Windows 8.1 clients.
Kind Regards,
Matt

Hi,
After apply the registry setting, have you tried to restart the client to make sure that it can take effect? After reboot, check the sync status to see whether it take effects.
or monitor the detailed work folder as mentione in the link below to get more information
http://blogs.technet.com/b/filecab/archive/2013/10/15/monitoring-windows-server-2012-r2-work-folders-deployments.aspx
Yolanda Zhu
TechNet Community Support

Similar Messages

Changing the workflow polling interval from 5 minutes

Trying to reduce the workflow polling internal from 5 minutes to something shorter. When a Change Request is created, the approval email goes to the manager and they reply with [Approved] or [Rejected] in the email. It sits in the workflow mailbox for
5 minutes before getting processed. I am sure its just editing the Management Pack but I can't figure out when setting to change and what to change it to if we wanted to reduce it to say 1 minute.

I THINK you are referring to the polling interval on the Exchange connector. this controls how often the workflow is executed that reads data from the mailbox. This operations is relatively expensive, so 5 minutes (300 seconds) is the default and recommended
minimum. you can adjust this interval from the configuration UI.
the workflow polling interval is how frequently each workflows is checked to see if they should run, and this is 30 or 60 seconds for most workflows. the polling interval is NOT how frequently the workflow executes, but instead HOW FREQUENTLY IT LOOKS TO
SEE IF IT SHOULD RUN. Take a look at http://blogs.technet.com/b/servicemanager/archive/2013/01/14/troubleshooting-workflow-performance-and-delays.aspx
for more details on what this value means.

How to create a custom layout set to display the KM folders...

Could someone please tell me how to create a custom layout set to display the KM folders?
Thanks,
Sudha.

Hi Sudha,
Please check the following blogs whick will guide you step by step.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4123
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3071
http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/c91b5610b65b4aa8204d09384d156b/frameset.htm
If helps reward points
cheers
dev

Work Folders client setup errors: No prompt for AD credentials & Lockscreen policies not applied.

Hi everyone.
I've recently set up a test environment for Work Folders (Server 2012 R2). I'm only testing inside my network so no internet access is required. I have encountered two issues:
When setting up a domain-joined client using a GPO everything works fine, except for the lockscreen/password policy settings. If I enable this on the fileserver the sync fails claiming that the PC
doesn't comply with my organization's security policies. This is very weird since Work Folders is responsible for configuring these policies.
There's no Apply GPO option available in the Control Panel item.
When setting up a non-domain-joined client for Work Folders I'm not prompted for AD credentials. The setup fails with the error:
You 're not set up on the server. However, if I open the workfolders URL in Internet Explorer I do
get prompted for my AD credentials.
Here's some details about the environment:
Server 2012 R2 DC. No other GPO's than the work folder GPO.
DNS alias called workfolders.<domain>.local configured.
Fileserver set up with self-signed certificate (SSC) bound to default website. The certificate is either manually installed on the clients or distributed via the GPO. The certificate is made with server name workfolders.<domain>.local.
Work Folder GPO on client OU:
- Certificate distribution of SSC
- Loopback Policy enabled
- Work Folders enabled with Force automatic setup
Both servers and clients are VMs. Non-domain-joined client logged in as local administrator.
Has anyone else encountered these issues? Can anyone shed some light on how to resolve this?
Thanks in advance!
MicaH

Roberto, I don't have a W3SVC1 folder containing log files, so no dice. I did find out through event logs that the account that's used to authenticate is the fileservers' local administrator account! Then I remembered that my local Administrator
accounts' password on my client is the same as on the fileserver (it's a test environment). So I changed the clients local admin password and it finally worked!
I still have issues with the Device Policies, though. Any thought on that subject?
Edit: The issue with the device policies is caused by my testuser not being a local admin on the client. I had adjusted my powerplan settings so I could keep my RDP session to the client open and without admin rights the work folders policies cannot be applied.
Does anyone know how to set these policies using GPO?

HT201269 hi, my new device was set up in the store that I bought it from. How can I transfer all old text messages over to my new device? I have followed the icloud back up steps on this page. Please help, thank you.

hi, my new device was set up in the store that I bought it from. How can I transfer all old text messages over to my new device? I have followed the icloud back up steps on this page. Please help, thank you.
Its an iPhone 4
Message was edited by: zzziggy85

Here is how
http://support.apple.com/kb/HT2109

HT2513 On Lion, how do I set which account the "event"/meeting request is sent from?

how do I set which account the "event"/meeting request is sent from? I have several accounts and currently iCal is sending all requests from my apple email (personal) account. This is bad!

Christopher Graham wrote:
Can he not just go into each account and set the default for each account the same "sent from" address?
No you can't. If you're in one account, and you create a new message, it defaults to the account you're in. If you create an email outside of the mail app, you can set a default account to send from. Andygoodyear has the correct instructions for that.

FEATURE_DISABLE_INTERNAL_SECURITY_MANAGER Registry Key setting

Hey everyone
I needed to add this registry key to IE11 in order to work around an issue that broke modal dialogs in JavaScript. I found the workaround in this post:
H TEE TEE P ESS COLON BACKSLASH BACKSLACH social DOT technet DOT microsoft DOT com/Forums/en-US/db748198-05f2-48b2-a2f4-33b3f7ed71b7/help-kb3008923-breaks-windowdialogarguments-in-secondary-windows?forum=ieitprocurrentver
(Sorry, the forum won't let me post a link.)
This article blames KB3008923 for the issue, however I checked on my end users' machines and they did not have this update installed. Despite not having this update installed, the workaround resolves their problem.
Unfortunately, there is no information out there about the ramifications of adding this registry key. I am concerned it may open IE11 to some security vulnerabilities. Can someone please explain what this setting does or point me to
a resource that explains this?
Thanks,
Dave

Hi,
f12>Console tab, refresh the page to show suppressed error messages.... navigate to display your modal dialogs...
Post back with the error messages displayed/listed in the Console of the Developer tool.
or
If possible please provide a link to your website or a mashup that reproduces the issue.
Regards.
Rob^_^
you will find the hotfix for 3008923 here -
https://support.microsoft.com/kb/3025390
from your description however it sounds like your issue is unrelated to that regression.

Availability, registry key exists, dword value not working

Trying to deploy some updates based on a version number in a registry
key. Unfortunately the test is failing regardless of what I set it to.
For example, if my registry key is 14 (0x0000000e) and I set the
application requirement for the key and value to exists and to be less
than 16 (0x00000010), it still fails the check. ZDM 7 SP1 IR4 Netware
6.5 SP8.

Shaun Pond wrote:
> Patrick,
>
> Patrick, Patrick, what am I going to do with you? :) My colleagues
> sweat away writing TIDs, and you don't look for them :) Try TID 7003836
>
Shaun,
Having now read that, can I say... wow.. In 2 IR's they haven't fixed
something that they broke which is a significant piece of functionality?
Especially if this is just a snapins issue? The workaround is to use
an unsupported setup Just my 2 cents. I get the ugly feeling that this
will never be fixed and the "official solution" will be to migrate to
ZCM. Maybe you could light a fire under someones rear to move that up
in the fix list...
That does explain it however as I know I had used it in the past and
I couldn't figure out what I was doing wrong.

How can I get the working directory of a project from an Annotation Processor in Java

I am writing an annotation processor in Java and in this annotation processor I want to be able to find a file in the Project hierarchy of the project on which I am using this annotation processor. Through the annotation I can pass in the path of the file I am searching for relative to the project root but i cannot retrieve the project's working directory.
Let's say that the processor is MyCustomProcessor and I am using it on the project MyProject. I want to be able to access(read) a file (a properties file) from the project structure of MyProject from the "process" method of MyCustomProcessor.
I have read this link Eclipse - Annotation processor, get project path but when I use their solution I get a null returned from the StandardJavaFileManager.getLocation(StandardLocation.SOURCE_PATH) call.
Some more details regarding the implementation:
MyAnnotationProcessor:
@SupportedAnnotationTypes(value = {"MyAnnotation" })
@SupportedSourceVersion(RELEASE_6)
public class MyCustomProcessor extends AbstractProcessor {
@Override public boolean process(final Set<? extends TypeElement> annotations, final RoundEnvironment roundEnv) {
for (final Element element : roundEnv.getElementsAnnotatedWith(MyAnnotation.class)) {

More details about the testing and development environment: Eclipse Kepler, JRE 1.7.
If you need more details just ask.

There is an identical post with an answer located at this link.

HT2506 How to set outlook as the default mail client for Preview

When I try to us Preview to email PDFs the Apple Mail client is the default mail client that opens. I use Lion and would like to set Outlook as my default. Does anyone know how to do this? It has been suggested that you click command-P, select PDF and add Outlook there but there are no options to do this. I am stuck and would like some help. I am using outlook:mac2011 version 14.1.4 and Preview 5.5.1
Cheers

I did not find a way to change the target application for the "New Email with Attchment" service for files and folders. However, you can follow this instruction here to create ANOTHER service, that will use Outlook: http://www.officeformachelp.com/2010/11/create-a-service-to-attach-files-to-a-ne w-outlook-for-mac-mail-message/
Hope this helps. Sebastian.

I would like to change the setting so that the whole lap-top screen apart from the bookmarks column is used for the information - at the moment I have only a strap using 2/3 of the screen, and the rest is mozlla background

The previous version of Firefox used the whole screen; this version (Firefox Beta 4.0) uses only about 2/3 of the screen, leavig a space above and below the part-screen that it does use,and filling the rest with a background. I was able to chose which background when I first updated to this version, but I wasn't given the choice, as far as i remember, to have no background and use the whole screen.

How recently did you switch? If it's less than 60 days, then Verizon simply reinstates your previous account. The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices. I'm not sure how it will go - but since you are still being billed for the devices...

Is It Possible To Change The SMS Alert/Reminder Time Intervals From Two Minutes?

I like the reminder so I do not wish to turn it off, but two minutes is kind of annoying. 5 or 10 minutes is more comforting for me. Anyone?

Can you disable it entirely? I don't need to be reminded I received a text, I heard it the first time :S

How can I find the local maximum in each interval from a graph?

I have very less experience in labview and need some helps. I am currently using Labview 2013.
I am analysing a very big data file. I want to find the values of the local maximum (the peak) in every 1000 data points. Is there anyway to do it?
I also want to have a control on when to start finding the local maximum point (after 10000 data points) and when to end it ( at 30000 data points)
The attachment is a very similar graph of what I am analysing.
Thank you very much.
Attachments:
A06-1-11_1.xlsx ‏642 KB

Hi John,
save that Excel spreadsheet as CSV file (form Excel).
The use ReadFromSpreadsheetFile to load the data into LabVIEW. Now you get an array of data and you can do anything with it.
- You might use a loop to pick an ArraySubset of each 1000 datapoints and analyze it.
- You might use numeric controls to provide an input for the user...
Where's your problem? It seems you already know where the goal is...
And try to THINK DATAFLOW! You don't want to analyze data from a graph, you want to analyze spreadsheet data. A graph is just a data sink (in LabVIEW)...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Work Folders on Windows 7 - Error Sync Stopped Can't Encrypt Files

Hello All-
We are getting ready to roll out Work Folders. It is working all fine on Windows 8.1 devices and am not trying to get it to work on Windows 7 SP1 devices. The Work Folders client for Win7 installs fine and I can configure it, however,
immediately after configuring work folders it displays an error stating that "Sync Stopped. Can't Encrypt Files." There is really no other information that I can find on this error.
Any help would be appreciated!!
Thanks

Digging around a bit more, I found some error msgs in Work Folders Event log:
Event ID 2100
Sync failed. Work Folders path: C:\Users\testuser\Work Folders; Error: (0x80c80314) The Work Folders path has to be encrypted. You might have an application holding the Work Folders folder open or the folder might be compressed. Close Windows Explorer and
any open files or apps, and check the folder Advanced properties to ensure that the folder is not compressed.
and
Event ID 9002
Work Folders detected a sync error. Check partnership status, network connectivity, and disk space.
Again, these errors only occur on Windows 7 SP1 Professional | Enterprise devices. Windows 8.1 devices function as desired.

How to read the default value for a Registry Key

I am trying to use webutil 1.0.2 Client_win_api_environment.read_registry to read the client registry key HKEY_CLASSES_ROOT\.xls, but the function is raising no_data_found. I can read the registry key in Regedit. I am logged on as myself as a non-admin NT user.
P.S: The Client_win_api_environment.read_registry can actually read HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\FORMS90_PATH because FORMS90_PATH is a registry ENTRY, whereas .xls in HKEY_CLASSES_ROOT\.xls is a KEY, but I still need the DEFAULT value of the key and it does NOT seem to work with client_win_api_environment.read_registry
My platform: Windows NT 4, Developer 9i 9.0.2.12.2, Oracle database 9.2.0.4.0, Oracle 9iDS
Webutil.log
===========
192.168.0.99:Lewis: 2003-Dec-17 16:36:44.998 WUL[getProperty()] Getting property WUL_ADD_PARAMETER
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.08 WUL[getProperty()] Value of WUL_ADD_PARAMETER=3
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.08 WUL[setProperty()] Setting property WUL_PARAM_PROPERTIES to B|14|33|50|0|2000
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.28 WUL[getProperty()] Getting property WUL_ADD_PARAMETER
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.28 WUL[getProperty()] Value of WUL_ADD_PARAMETER=4
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.38 WUL[setProperty()] Setting property WUL_PARAM_PROPERTIES to B|14|33|50|0|0
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.48 WUL[getProperty()] Getting property WUL_ADD_PARAMETER
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.48 WUL[getProperty()] Value of WUL_ADD_PARAMETER=5
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.58 WUL[setProperty()] Setting property WUL_INVOKE_SPEC to 1|14|33
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.68 WUL[getProperty()] Getting property WUL_INVOKE
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.68 WUL[getProperty()] Value of WUL_INVOKE=-1
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.78 WUL[setProperty()] Setting property WUL_PARAM_PROPERTIES to F|14|3
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.88 WUL[getProperty()] Getting property WUL_PARAM_VALUE
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.88 WUL[getProperty()] Value of WUL_PARAM_VALUE=
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.98 WUL[setProperty()] Setting property WUL_DESTROY_PARAMLIST to 14
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.98 WUL[VBeanCommon.eraseFromObjectCache()] Removed cache reference to Object 14
Lewis Choo Man
CMIC,
Canada.

Hi Manohar,
You have to give Distribution Key "1" in the Plannner Profile as well as if you take a column for Distribution Key seperately in your Planning Layout for Cost Element Planning, in the Excel file, you can give Distribution Key as "1" in the respective column. When you upload the data through Excel, the system will take the DKey as "1" only.
I hope it will solve your problem. Pls revert back for further assistance..
Srikanth Munnaluri

Registry Key / Setting to decrease the work folders client polling interval from 10 minutes

Similar Messages

Maybe you are looking for