Registry Network setting query

Can anyone tell me what the below specifically is for:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000
I note that the last subkey increments by 1.
I understand that “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class” stores configuration data for classes of hardware devices displayed in Device Manager. Each subkey in the Class subkey represents a device class and is named by the
globally unique identifier (GUID) for the class: a 16-byte value generated from the unique identifier on a device, the current date and time, and a sequence number. A GUID is used to identify a particular device or component.
So the next part of the key “{4D36E972-E325-11CE-BFC1-08002BE10318}” is the Network Adapter class that includes NDIS miniport drivers.
The last part of the key “0000” specifies the upper and lower binding interfaces for the component.
Regards, Darren

Hi, djrolfe,
These key is necessary for network adapters in Registry. These subkeys store data that applies only to that device.
You can refer to the link below for more details:
http://technet.microsoft.com/en-us/library/cc780532(v=ws.10).aspx
Roger Lu
TechNet Community Support

Similar Messages

JDBC & setQueryTimeout - or is there another way to set query timeout?

I am trying to set query timeout for TimesTen using jdbc library. But it seems like TimesTen jdbc library does not support setQueryTimeOut. Is there a way to set it without having to set it statically in the DNS?
I tried to set the SqlQueryTimeout in the connection string but it doesn't work either:
     Connection connection = DriverManager.getConnection(
     "jdbc:timesten:client:TTC_SERVER=bleh;TCP_PORT=17013;TTC_Server_DSN=blah;TTC_Timeout=0;SqlQueryTimeout=5;");
Thanks for your help!

Thanks for replying. I don't know have good knowledge on Cache Connect. I will have to read on that first.
It seems like TimesTen does not support jdbc setQueryTimeout. Calling this method on TimesTen jdbc library will return false: supportsQueryTimeout().
I created a test class for testing the SqlQueryTimeout. I set the TTC_Timeout to 400 seconds and SqlQueryTimeOut to 5 seconds. So after 5 seconds it should time out.
The way I test it is by putting a break point before executing the query, do a route add DBServer to an un-connectible gateway to simulate the network delay/connection problem and then continue after I added the route.
After executing the query, instead of timing out after 5 second, it will wait for a few minutes before timing out.
The code for testing the timeout is as follow:
public class TTTest {
     public static void main(String[] args) throws ClassNotFoundException {
     Class.forName("com.timesten.jdbc.TimesTenDriver");
     try {
     Connection connection = DriverManager.getConnection(
     "jdbc:timesten:client:TTC_SERVER=server;TCP_PORT=17013;TTC_Server_DSN=server_dns;"
     + "TTC_Timeout=400;SqlQueryTimeout=5;");
     System.out.println(connection.getClass().getName());
     Statement stmt = connection.createStatement();
     //com.timesten.jdbc.JdbcOdbcStatement stmt = (JdbcOdbcStatement)connection.createStatement();
     System.out.println(stmt.getClass().getName());
     System.out.println("Query started " + new Date());
// Pause here, put a route add and continue
     ResultSet rs = stmt.executeQuery("select count(*) from mse");
     rs.next();
     System.out.println("there are " + rs.getInt(1) + " rows");
     rs.close();
     stmt.close();
     connection.close();
     } catch (Exception x) {
     x.printStackTrace(System.err);
     System.err.println(new Date());
}

I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

Error: there is a problem connection to the GPRS service in your registered home network, error trying to make data connection. this may be casued by a voice call, a wired activesync connection or inncorrect network setting

like 2 weeks ago i called in to att to see how much is the data plan and it would end up costing $30.
so i was like screw that. well they figured that i got a new phone replacing the LG shine. so they asked
for to call this number so they can recieve data which would updated the system that i have a plam treo 750.
ever since this conflict i can't send picture messages. i get that problem. everytime i attempt to send a picture
i recieve this.
- there is a problem connection to the GPRS service in your registered home network.
- then i get a test that says error trying to make data connection. this may be casued by a voice call,
a wired activesync connection or inncorrect network setting.
please someone help me.
btw. hard reset and soft reset did not work for me.
Post relates to: Treo 750 (AT&T)

problem fix, i had to call in. customer serivce. and when i called to ask about the plan. they blocked it. so i had to unblock my internet.
Post relates to: Treo 750 (AT&T)

I've forgotten my Wi-Fi password for a network set-up years ago and am trying to include a new iMac on the same network. How can I do this?

I've forgotten my wi-fi password for a home network set-up years ago on a Powerbook. I'm now trying to add a new iMac to the same network so I can have 2 hooked up. How can I retrieve my password for the network I created or can I set-up a new one? I did try the latter, but it didn't seem to work on the new iMac for some reason. Thanks in advance for any suggestions!

HI, Welcome to the Forums...
The password may be stored in your keychain on the system you set up the original PowerBook.
Run KeyChain access in the utilities filder and see if you have a Airport base station password entry, from this you can reveal the password.
Regards,
Shawn

I cant download apps throgh wifi on my iphone however when i connect to cellular data it starts downloading. then what is wrong over wifi , i tried reset network setting but i didnt help

i cant download apps throgh wifi on my iphone however when i connect to cellular data it starts downloading. then what is wrong over wifi , i tried reset network setting but i didnt help

Definitely sounds like an issue with your Wi-Fi network. Do any other devices on the network have similar issues? Is it an issue only with downloading apps? You can check by trying to load a website in Safari.
I would try turning your Wi-Fi router off for 1 minute, and back on again.
After doing that, disconnect and re-join the Wi-Fi network on your iPhone and try downloading an app again.

How to set Query SQL Statement parameter dynamically in Sender JDBCAdpter

Hi All,
I have one scenario in which we are using JDBC Sender Adapter.
Now in this case,we need to set Query SQL Statement with a SELECT statement based on some fields.
This SQL statement is not constant, it would need to be changed.
Means sometimes receiver will want to execute SQL statement with these fields and sometimes they will want to execute it with different fields.
We can create separate channels for each SQL statement but again that is not an optimum solution.
So ,I am looking out for a way to set these parameters dynamically or set SQL statement at Runtime.
Can you all please help me to get this?

Shweta ,
<i>Sometimes receiver will want to execute SQL statement dynamically</i>....
How you will get the query dynamically? Ok Let me assume, consider they are sending the query through file, then its definitely possible. But u need BPM and also not sender JDBC receiver adapter instead, receiver JDBC adapter.
SQL Query File ->BPM>Synchronous send [Fetch data from DB]--->Response -
>...............
Do u think the above design will suit's ur case!!!!
Best regards,
raj.

I've been having an issue of connecting to wifi. I have restored and set up my phone as a new one and i still can't connect. Also i have restored my network setting also. The wifi button is still grey and i cant switch it on or off.

I've been having an issue of connecting to wifi. I have restored and set up my phone as a new one and i still can't connect. Also i have restored my network setting also. The wifi button is still grey and i cant switch it on or off.

Hi _Pchay,
Accordign to the artcle below, it looks like you have done all the troubleshooting steps and your next step may be to contact Apple Support.
iOS: Wi-Fi settings grayed out or dim
-Griff W.

PLEASE HELP ME, Problems with airport/network set up all of a sudden.

Ok here goes. Saturday Aug. 19 I was on the internet, everythings fine. Then all of a sudden my airport drops/disconnects. I went into assistant, internet connect, preferences and so on. My computer tells me in Network Diagnostics that the airport is green, airport settings is green, network setting is green, isp is green, but internet and server are red. Ive messed around with it to no prevail, in fact I believe I think I have made it worse. Now only the airport is green. I have know idea. My roommate also has an Apple and his wireless/airport is fine, nothings changed. As I have "messed" with it, I have come across a section where it tells me my internet set up/preferences or something has been changed by another application, if that makes any sense. This is not so much a problem as it is a hassel. Now I must sit at the coffee table to get on the internet.
Is there a way to start over or is this a serious problem needing an Apple store tec? Can someone walk me through what I need to do to fix this, as I have no idea what Im doing.
If there is any more information needed... Please ask.

No the password isn't your apple id password.
You encrypted your backup with a password, if you don't remember the password, then i'm sorry you won't be able to use it.

TS1559 My iphone4s had done the new iOS update but the wifi and Bluetooth still unable to turn it on/off , I had try to reset network setting but is not working , plz teach me what I should do , thx

I had done the update agn & agn but the problem is still be there . I ask for repair with KLCC maxis centre (malaysia) , there ask me to pay around RM1000
I done the network setting reset also ....
Someone help me plz

the main discussion regarding this issue: https://discussions.apple.com/thread/4310121

My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

Hi sunnylordz,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying.
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
Cheers,
Mario

When i try to restore my ipod touch 4g itunes keep telling me that to make sure that my network setting is correct,and make sure that i connected to the internet ?

when i try to restore my ipod touch 4g itunes keep telling me that to make sure that my network setting is correct,and make sure that i connected to the internet,wht is that supose to mean i allredy connected to the inter net but i dont know how to make sure that my network sitting is correct help me plz

Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

What is the Smallest Mac Network Set Up

We are a two person office -two imacs on 10.6 and would like to know what the smallest, most efficient network set up between the two machines could be, including back up. Central data access is the issue.
a) We heard there are dedicated external hard drives that can be used by two machines at the same time. If so what are they called and how can you back them up?
b) We thought of buying a mac mimi as a server and use its hd as the communal network hd. Do we have to buy an extra screen to see what the mini is doing and also do we need a router as an interface?
If someone can give us a hint, would be much appreciated
best,
fred
Message was edited by: softlimiter

There are a lot of ways you could tackle this one; which way you go will depend on what your full needs are, such as:
How much shared storage do you anticipate needing?
Do you need backups of that data, as well as backups of the iMacs?
Do you need more controlled shared access to files than simple peer-to-peer file sharing allows?
Do you need any of the services that OS X Server provides?
The new Mini server would certainly be a viable option as a simple file-sharing and backup server. (I would dedicate an external drive on the Mini for use with Time Machine to back up the Mini and the iMacs rather than using one of the internal drives.) OS X Server can be run "headless" via a networked computer with the provided Server Tools. A new router would not be necessary, providing you have a free port on your existing router or switch to connect the Mini to.
Another option would be an NAS device like the Drobo units to house your files. Relatively simple units with little setup. The downside is backups - I believe that most NAS devices run in RAID 1 or SPAN, so there's little fallback if a drive in the NAS unit fails. Still, this would be less expensive an option than a Mini server and extra storage..
Food for thought.
-Douggo

Proper connection between av receiver and iMac (network setting)

What would be the proper network setting, to connect an av receiver (connected to cable router/modem)? Tech support peeps at Harman Kardon say I need to share my "Music Library", for the home network feature to work and allow me to stream music from my iMac (running OS X 10.9.2).

Does your Harman Kardon support airplay? Does it have wifi? You're gonna need to give more info unless someone here happens to have your exact setup. How does your mac connect to the internet?

Network setting is changed to WCDMA Preferred when connected to Wifi

Network setting is not changed at little time, but seems to be changed when Wifi is connected for a long time.
Is there the solution?
Model:C6903
Customization Version;1276-7948_R5C(HK model)

Hi Erisis,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
With the information supplied, I can advise that this is likely related to an application changing the setting. I suggest that you try use the handset in Safemode and see if the issue continues.
1. Turn handset off
2. Turn handset on
3. When you see first splash screen hold down Volume Down key until handset is completely on.
To turn Safemode off simply turn the handset off and back on like normal.
Let us know if the issue continues.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Registry Network setting query

Similar Messages

Maybe you are looking for