Reimport Model after BAPI Changes

Hi,
Understand that a workaround to refresh the cache/metadata is to restart the J2EE server, after some BAPI changes and reimport the model.
Is there any solution without restarting the J2EE server?
Thank you.

Hi Vincent,
The only possible way to refresh the Metadata is to restart the J2EE server.
check this link
Reimport a Model of a Custom Bapi Function
Regards,
shyam.

Similar Messages

Build ERROR after reimport model, too many datatype deleted

Hi all,
now when I reimport model of my DC, I found too many datatype would be deleted after I press Finish. I think with this deletion my dc will never pass the build. All I wonder is why this happen, what kind of operation on back end will cause this kind of deletion.
I know there must be some changes behind java layer, but I dont know why they just delete datatype, I can not continue my work with these models, they are too many, I can not fix them all or delete&recreate them.
Give me some hint?
Best Regards,
William

HI William
There might be some changes done in your Backend [exsisting model]
so it is throwing dump when you are trying to reimport. what you can do is delete the exsisting model and try to create a new model. first take the back up of the project and experiment on the dummy project
Best Regards
Chaitanya.A

Reimport model

Hi,
I was wondering how ABAP WebDynpro handles model changes?
In Java WD, you can do something called "Reimport model", which will then regenerate the context nodes for import and export and the java representing classes of ABAP objects/ddic structures etc.
Do you need to do that in ABAP WebDynpro? Or the developer is expected to change the generated method manually?
Cheers
Michael

Elton,
Vijayakhanna is right: it is necessary to re-start server. After first model usage metadata get cached and stay in cache as long as server is running. So even you have modified model, stale metadata is returned unless you restart server.
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com

Toshiba Satellite p75-A7200 stuck on toshiba logo after bios change

My Toshiba Satellite p75-A7200 is stuck on toshiba logo after bios change.
entered bios fine changes from UEFI to CSM boot and now i cannot enter bios or boot past toshiba logo.
Ive tried F2 tapping and holding while powering up the laptop(tried every Fkey,DEL,ESC, with and without FN key)
cannot re-enter bios.
Also i tried to run the bios update cd created multiple 1.50 1.40 even 1.00, it doesnt seem to read any media.
i tried holding C, FN+C and f and just about every key on the keyboard to get something to work. i had dvd as top of boot priority for a while now so i shouldnt have to try f12 or holding C before boot but i tried . it doesnt seem to read any media
i tried windows 8 install cd, Ubuntu, centos, nothing goes past toshiba logo and no errors, i dont get the non bootable device error so its seems to not be reading the dvd. (dvd does spin and make read noises) im trying to find my usb floppy drive to try a floppy version but it acts like its not reading any media.
I also pulled the HDD and all usb devices to make the dvd the only media available and with the HDD out it spins then toshiba logo then black screen with solid white horizontal curser on top left of screen.(only happens when hdd out)
is there some type of key combination that will force a bios update or a crisis recovery mode for bios.
I also Pulled the battery for 2 solid days(battery,cmos battery, and power supply and held power button for about 10 mins while watching tx to make sure the thing was drained before the 2 day sit with no power at all.
this happened the second i changed from UEFI to CSM boot so its not a motherboard problem or anything like that because all was well before this setting change.
I already pulled the HDD and backed it up to another drive and swapped it to elimiate that.
any ideas on a secret key combo to force a bios read from dvd or usb or anythng.
or another combo that im just missing to enter bios after CSM boot.
UPDATE
to do a crisis recovery on this laptop
1 get a usb stick and format it in fat or fat32
2 download "7zip" and install it if you dont have it.
3 download bios from toshiba website.
4 run the installer for bios but dont choose and option just close it we just want to extract the files to the location normally c:\splnvxxx where xxx is the version number like 150
5 goto the installed locaion "c:\splnv150" or whatever number.
6. find file os2014273a_150 or something similar. it will be an application, it will end in version number _150, and it will also have a disc image file of the same name. but we want the app.
7. right click on it and you should have an option 7zip then extract
once extracted there is a folder now archesxxxxxx_bios_v150_win
8 copy the bios file located in archesxxxxxblahblah/X64/BIOS.fd , BIOS.fd is the bios and just copy that to a BLANK usb thumb drive that was formatted with fat or fat32.
9. put usb into your satellite and unplug the power from it.
10 holding FN + ESC key together plug the power back in and press power button.
11. release keys FN and ESC if all is right it will have the power button and led on from blink abut every 1 second while it searches for the bios. once its done it will reboot and you should be good to go.
if it keeps cycling with the power button then the bios is named wrong or something is not right with the usb. try reformatting it again and make sure that the bios file is the ONLY thing on the drive.

Ok a little research and digging into the bios exe downloaded from toshiba shows this has INSYDE BIOS witch should have a recovery process wich i prepared a usb stick with just the bios.fd on it found some post around toshiba forums with different models using win +B or Fn + F but neither of these worked for me to force bios update
anyone with this model know the key combo to force recovery

Limit PO on approval after any change is going in to Error in process

Hi,
We have a problem where one a LIMIT PO is created and ordered and if we make any chnage in the PO the status is changed to Awaiting Approval and on approval, the status is setting as Error in Process (EIP) instead of Ordered.
Application Monitor show following errors - The data entered is correct and have no issues. Not sure wht change is not updating in backend and showing EIP.
Instance of object type PurchaseOrder c ould not be changed
Purchase order still contains faulty items
In case of account assignment, please enter acc. a ssignment data for item
PurchOrder Transfer failed
This is issue is coming after applying SP 15
Thanks,
Piusha

Hello,
We have recently patched our ERP system to SP 18 and SRM is on SP 15 and we are experiencing a similar issue, although our issue is with using statistical order codes linked to cost centres on normal orders not limit orders which are not transferring to the backend correctly.
I have a high priority OSS call open with SAP and as of yet haven't had a response, I suspect they are looking into a note.
Before finding this issue, we had an issue with General Ledger codes not transferring to the backend from SRM, SAP advised they had changed the BAPI_PO_CREATE1 to bring it into line with ME21N.
In doing so, it resulted in us needing to change our config and apply various notes, some of the notes below may be of use to you:
1464524
1507715
1549597
1487572
It is possible all of these issues are linked to the BAPI change but I am waiting for SAP to get back to me to see if it is.
I also have another issue, again in the monitors I have the error:
PurchOrder : Purchase order still contains faulty items
PurchOrder : Sum of quantities >2< larger than total quantity
PurchOrder : Transfer failed
Have any of you got this issue and able to provide any information? I'm continuing to investigate but I think I may need to raise another OSS message as I can not see anything wrong with the purchase orders.
Thanks in advance
Lisa

BAPI changing Material Masterdata - EAN type unwillingly modified

Hello everybody!
I want to modify material units of measure with BAPI : BAPI_MATERIAL_MAINTAINDATA_RT
I fill
HEADDATA,
CLIENTDATA,
CLIENTDATAX,
PLANTDATA,
PLANTDATAX,
UNITSOFMEASURE ,
UNITSOFMEASUREX
tables.
For some articles, the EAN (EAN11) and EAN category (NUMTP) are unwillingly changed, without dump or message.
Those articles look like this:
Before: 2124781000000 (6 nul positions), internal EAN category Z1.
After BAPi: 2124780000000 (7 nul positions), EAN cat : EA
There are 2 units of measure : ST and CAR (CAR = 20 ST for example)
I don't want the EAN to change. I suppose my selection is uncomplete in the BAPI.
I add that it was working fine before our ECC6 upgrade.
Can anyone please help ?
François Leyssenne

It is fixed at last , The problem was I was setting only
listParams.setValue("MATERIAL", "346"); to fetch standard data ( MATERIALVALUATIONDATA ) .
To fetch MATERIALVALUATIONDATA which consist of Standard Price and Currency we need to set this parameters also.
listParams.setValue("PLANT", "ZRP3");
listParams.setValue("VALUATIONAREA", "ZRP3");
And you will get the complete MATERIALVALUATIONDATA data structure then .
|-|------------------------|------------------------|--------|-----|---|
| STRUCTURE 'BAPIMATDOBEW'
|-|------------------------|------------------------|--------|-----|---|
|P|MOVING_PR |STD_PRICE |PRICE_UN|CURRE|CUR|
|-|------------------------|------------------------|--------|-----|---|
|0| 1 2 3 4 5 6| 7 8 9 0 1 2| 3 4|56789|012|
|-|------------------------|------------------------|--------|-----|---|
|S|00000000000000000000000C|00000000000000000100000C|00001C00|INR |INR|
|-|------------------------|------------------------|--------|-----|---|
{PRICE_UNIT=1, PRICE_CTRL=S, CURRENCY_ISO=INR, STD_PRICE=10.0000, MOVING_PR=0.0000, CURRENCY=INR}

RFC doesnt show up in reimport model

Hi,
We have created a ZRFC and when reimport and add that to the model . after i give the login credentials for the ECC and search for the RFC it doesnt show up in the search. But it still exists in the system. Do I have to do anything like exposing it as service to show up in the list.
Please let me know.
Thanks,
James

Hi,
Yes, RFC should be remote enabled. Also, make sure that your server credentials are pointing to server , where RFC exists and not any other server.
Regards,
Apurva

Reimport Model for JavaBean

Hi All,
Whatever I try, the option 'Reimport Model' in the context menu is disabled for my JavaBean Model.
Get's a bit anoying after having deleted the model, rebuild it, and reworked the context mappings for the gazillionst time.
Anyone any idea?
Thanks,
Jurjen

Hi Jurjen,
We too have to face same problem again and again. But following points may help you:
1. When you add any attribute to your java bean, ensure that it has proper getter and setter method. Then go to model class which is generated based on Java bean class and manually add the attribute in that model class. You can do manual addition by double clicking the specific model class, going to properties and then clicking on New. Make sure that whatever property you are adding must have same name as what you have added as attribute to your java bean.Reflect it in mappings also.
2. If you are deleting some attribute from java bean class, remove it's getter and setter also. Then again in properties of corresponding model class, delete the associated property. Reflect it in mappings also.
3. If you have to do complete re importing of java bean model classes then in most of the cases we found out that mapping from Component Controller to Bean model have to be reconstructed but not from view to Component controller. Only some addition deletion of some attributes have to be done from view to Component Controller.
Regards,
Gopal

Cannot update iTunes after motherboard change.

iTunes was on D drive. After MB change, D drive became E drive. Updates fails since D drive is now the CD player.

Define "update". Do you mean Apple Software Update?
The iTunes application normally installs components in Program Files and Program Files (x86) on 64-bit machines. Those folders are normally inside the system drive, which is typically the same as the boot drive. The iTunes library is normally created at <User's Music>/iTunes. If all content has been stored inside the default media folder of .../iTunes/iTunes Media then the library should be portable and can be operated from any path. Hold down shift as you launch iTunes to get an option to choose or create a library, click choose, and browse to the iTunes Library.itl file inside your iTunes folder. Playlists are all stored inside the .itl file. The library consists of the .itl file, some supporting files in the same folder and the album artwork folder, and all media that has attached to the library.
You can't generally save the playlists independently since iTunes records them with absolute paths which may not work if/when you try to reimport. Moving a potable library around as a unit works. See Make a split library portable for background.
tt2

My ipod works in itunes but does not appear in "my computer" after I changed the properties

My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.

Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support

Admin permanent status gone after password change

Hi everyone.
a couple of days ago i decided to change my password as good safety measure. changed as usual, only getting a message about keychain and a possible need to do the change in it after unlocking. seemed pretty standard to me, don't know if it is. (6 month mac user...)
however, for some strange reason, afterwards the change, even if i am still an admin in the user accounts i have to identify myself with pass every time i need to do some change in admin areas, as changing the apps in the apps folder.
i seem to be working as a standard guest , needing to elevate my status every time i need to something standard as changing my apps or renaming them.
i've tried correcti the permissions in the disk utility and also tried to repair my keychain, without great sucess.
anyone knows how can i get my permanent admin status again? it's a pain to need to type a password every time i want to drag and drop an app!
Filevault is active on my home folder.
thanks for your help
filipe

Macbook-de-Filipe:Applications filipe$ ls -aldeO /Applications/scilab-5.1.1.app
drwxr-xr-x@ 3 filipe wheel - 102 17 Abr 20:42 /Applications/scilab-5.1.1.app
for example this one. an app in Apps folder i wanted to update
i didn't changed app folder permissions before. i believe all this weird behaviour appeared after i changed my password.is there a system log i can see?
i was cheking the app folder permissions and is :
system : read and write
wheel : read
everyone: read
i haven't changed them before but i have found that if i had a admin group with read and write permissions i can have back my standard usage. however i don't know the implications of this and don't like treating the symptom, prefer instead to treat the cause
thanks for your help V.K.

How do you update apps that where purchased using different iTunes accounts? I get a cannot connect to iTunes message and it won't accept the password even after you change it.

Both my iPad and iPhone have the same problem. I have purchased apps with three different accounts. I understand I will need to use the original acct to do the update but every time it asks for the password I put it in and get a message that I cannot connect to iTunes store. I have even had the password reset and it still will not connect on the upgrade. But I can sign in with that account and purchase new apps i am loading a free one now just to make sure. So what is that about? Please do not tell me I have to also use the original password! We have reset them so many times that there is no way to remember the original one used at time of purchase a year and 1/2 ago. Please help. I have also upgraded to the iCloud thinking this would solve the problem but it still exists.

I use only one Apple ID and only one ID. I did have to change the password at one point but I had no issues at all with updating apps after I changed the password.
If you can download new apps with the ID that you changed the password for, I would think that you will be able to update apps associated with that ID as well.
Did you try restarting the iPad after signing out of the one account and then sign in to the other account/accounts?

Crystal Report (RDC) doesn't print correctly, after Printer change ?

There are problems with the page format and the color settings for the new printer !
It should be resolved with ADAPT01104291 FixPack3.8
Description: Crystal reports may not print properly after users change printers by using the SelectPrinter command from the Report Designer Component (RDC). The cause of the problem is that the incorrect DEVMODE structure size is allocated to the print job.
We are using CRXI_R2_SP5_Upgrade: ProductID=11.5.11.1470.2.26.Patch
but we still have the problems !

Hello Don, thank you for your extensive answer. The PCL printer of HP is not the trouble maker. The problem is obviously replicable with any other Printer Driver (Espon/Sharp/Kycocera a. s. o.) I only installed this PCL Printer Driver of course you mentioned it in your example before.
Okay, let's talk about the Devcap-Program and there Information about the paper source of a printer. Even in Visual Basic it's possible to get those Information by Win-API-Call's. Here they are:
PrinterID: , AusgabeName: , TreiberName: , Port: LPT1:, TrackDefault: , PaperSize:
Papier-Schächte:
Automatisch auswählen, Nr: 15
Automatische Druckeraus, Nr: 262
Schacht 1, Nr: 261
Schacht 2, Nr: 260
Schacht 3, Nr: 259
Schacht 4 (2000-Blatt), Nr: 258
Manueller Einzug (Schac, Nr: 257
Papier-Formate:
Letter, Nr: 1
Legal, Nr: 5
Statement, Nr: 6
Executive, Nr: 7
A3, Nr: 8
A4, Nr: 9
A5, Nr: 11
B4 (JIS), Nr: 12
B5 (JIS), Nr: 13
11x17, Nr: 17
Umschlag 10, Nr: 20
Umschlag DL, Nr: 27
Umschlag C5, Nr: 28
Umschlag B5, Nr: 34
Umschlag Monarch, Nr: 37
Jap. Doppelpostkarte gedreht, Nr: 82
12x18, Nr: 131
9x12, Nr: 132
C4, Nr: 133
Maximum 11,7 x 17,7, Nr: 134
and even set those Information for the RDC-Sturcture, so there is a solution for the setting of the paper size.
But there is not solution for the setting of the color nor the further page settings (Printing onesided or bothsided a.s.o.)
I can change the default windows printer settings but that has no effect on the RDC-Print ! So I think, there must be a solution by the Crystal-Report-Design-printing-DLL (craxdrt.dll) !
Greetings V. Hölscher

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or password. If I delete my apps and start over, I may lose the apps that I purchased...

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....

Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well.

After my company changed the e-mail address, I had to change my Apple-ID. How do I update my purchased Apps after the change?

The renamed Apple ID does not update all the Apps but comes up with the old AppleID, but that ID is not there anymore and neither the old or the new password is working
On the FAQ pages I just find a long list of Apps, stores tc. that I have to update, but no explanation on how to do that.
I do not want to buy all the apps again just because I had to change the e-mail address and because of that the AppleID.
It is ok to remove the free ones and load them again, but the paid one?
How is Apple handling such things?

OK, after reading other and similar threads too, I found a solution myself.
Thought to share it.
On my iPhone, after the change was made at the AppleID site, I had to logoff from the old AppleID and then to relogon with the new/changed one. After that I could update all apps again

Reimport Model after BAPI Changes

Similar Messages

Maybe you are looking for