Rejecting a call with 7921

Could I reject an incoming call with a Cisco IP Phone 7921 pressing any button (for example the red one)?
Thanks.

iDivert, would transfer the call to vm-pilot.
/M

Similar Messages

Updated my iphone with iOS7.0.3, still dont have the option to reject the call or reject the call with a message when someone call and the phone is in the lock screen?

Updated my iphone with iOS7.0.3, still dont have the option to reject the call or reject the call with a message when someone call and the phone is in the lock screen? I was of the impression that this issue will be fixed with updates. Please see the screenshot.

Hello Beardsell,
This is when the phone is unlocked mode. My snapshot is when the phone is locked.
Remember when you get a call when the phone is locked and you used to have slide to answer in iOS 6 and if you slide up you would have options to reject, reject with a message and reject with a reminder. We dont have that in iOS 7. iOS 7 *****, I cannot get back to iOS6, apple needs to be user friendly. Screen shot 1 when the phone is locked, screenshot 2 when the phone is unlocked.

Reject a call with automatic sms

After IOS7 upgrade, is not possible, during a call, reject a new call in entrance using the automatic sms.
The rejection of a call in entrance, using automatic sms is possible now only for the first call in entrance.
It is a software bug?

Wait until iOS 6.0 is released .

Accept call with keyboard

On a Q10 I need to answer calls with at least one key not with a touch gesture. How can I do this?

Problem with the gesture? Hmmm... let me think:
1. I have 35 physical keys yet I have to swipe to accept/reject a call;
2. Touch display is sensitive to moisture, sweat, dirt - sometimes - I can't accept/reject a call with wet hands (or gloves). No summer/winter use for me;
3. Key press = action with feedback in one step (you know, that's why I have Q10 instead of Z10), while gesture means several steps: check call, swipe, swipe again, rub you hand with your shirt, swipe again, swear, swipe, exhale, call and explain that the phone was out of reach. Ok, not every time, just, annoyingly, that several times when it matters;
4. Basic functionality of a phone should be to call, answer and reject connections in the easiest, most ergonomically way - this is not the case. It looks like a modem card plugged into a PC and with a full keyboard you still have to use software buttons to make it work.
5. Ok, it is so cool to swipe but, please, preserve the traditional functionality of a keyboard. While I was typing this message I struggled a lot with selecting text for eliminate misspelled words, while a trackpad would have been more appropriate for this.
6. Should I extend this to Speed dial issue?

Can't reject a call from lock screen with pin password

When I set a PIN code for my iPhone with iOS7 "7.0.2" and recieve a call, I don't get an option to reject that call directly!
The only valid options on the lock screen is either to set a reminder to call back the caller or reject with message. Is there any hidden feature behind this? or Apple really intended that?
Attached 2 screen shots for a caller
While screen is locked with PIN password
While screen is unlocked

It has been this way for some time. This is how you would decline a call from the lock screen, and then declining a call from the open screen is how you have it showing.

IPad "misbehaves" when used with a MultiSIM - picks up/rejects phone calls

Hello Cupertino,
iPad 3G misbehaves when used e.g. with a MultiSIM card of T-Mobile Germany.
It is said to pick up phone calls and actively rejects them. Thus the "Main" Mobile Phone (e.g. the iPhone) will ring ONCE then the iPad will pick up and reject the call. (On T-Mobile Network, one cannot disallow phone calls for a specific MultiSIM, all Phones of the same number will ring simultaneously).
This is a really serious and embarassing bug, please fix it with next OS version.
Cheers,
Thomas

No! this is a "bug", because the ipad is connecting via the sim-card in an incorrect way. From day one on Apple always is pressing the fact that the iPad is a "data"-device ONLY and NOT a "phone"-device.
There is no intention of Apple to make the ipad do anything else as "connecting to the internet". That's why there is no textmessage app, no voicemail, no phonestuff on the the ipad. That's perfectly ok! But considering this the iPad misbehaves when connecting to a gprs/umts network because it is connecting showing itself as a PHONE AND DataDevice instead of DATA-ONLY.
THAT IS WRONG, because this automatically triggers the telcom provider to sent voice and messaging connections to this device.
Proof: On a jailbroken iPad it is possible to simply switch the device to the correct CGCLASS="CP" setting. With this setting the iPad only connects as a datadevice (e.g. like a usb-umts-stick) and doesn't answer any incoming non-data-connections.
BUT: I don't want a jailbreak! If want a correct working iPad.
And last but not least: the multi-sim-option (meaning more simcards under the same number) is totaly legitimate and is part of the usagespecs for telecom-networks. It is working perfectly well if (yeah, IF) every device connecting to the network identifies itself correctly with its capabilities.
If a device identifies itself as a phone and it actually isn't, then this device has a serious bug and is not correctly configured to be used in a mixed telcom network. Just because "normaly" everybody uses only one simcard, it is no reason NOT to stick to specs.
This is just sloppy work when porting the iPhone OS to the iPad. Simply forgotten! No big deal, but fix it, because Apple is "killing" a whole generation of german t-mobile users (all iphone contracts older than ~12 months can use their dataplan with free multisimcards from t-mobile on different devices!).
Message was edited by: kinonet

How to reject call with sms on iphone 4

Plz tell me how to activate or deactivate this feature in iphone 4.
i.e. to reject call with an sms !!

When you receive a call you swipe up and there are 3 default messages you can respond with. They all start with "Can't talk right now...".
To modify these messages go to: Settings-->Phone-->Reply with Message Then tap the one you want to change. It will still start with "Cant talk right now" regardless of what you change the rest of the text to.

How to disable reject call with a message? Xperia Z(c6603) KK4.4.2 (.230)

How to disable reject call with a message? please help
Xperia Z(c6603) KK4.4.2 (.230)

I selectd this device because i was counting on the brands traditional stiriving forcsup. Quality.This was a mistake.About 1000 euros for a device that looses quality with every update and consumes my time with frustrating experiences all along.Very poor development i must say.

Deactivate reject call with text

I want to deactivate this feature of reject call with text in IOS 6. As i often touch this while pulling out the phone out of my pocket and the call gets disconnected and an auto SMS is sent to the caller.

Since this requires two separate actions on your part, I really don't understand how simply pulling your phone out of your pocket triggers this. At any rate, there is no way to disable this feature.

In lock screen how to reject the call??

in lock screen how to reject the call??

iPhone, iOS 7.02
What's the reason why the screen can't show the same touch screen buttons in locked as in unlocked mode?
When I lock the phone I expect the phone to be locked with chance only to answer or reject an incoming call.
Often when not beeing able to accept a call is when one is in a situation where you can't answer and the rejection, as well as answering of course, shall be very easy to do.
OK for the dubbelclick on the lock button but how to find that little button when stressed and can't answer?
This was better in IOS6!

Cancel waiting call with SMS problem and advertisement

Hi All,
I've a serious problem and I appreciate if anyone can help me on it. Recently, I've upgraded my new Xperia Z1 to the latest software, but after I did that rejection calls with SMS is stop working and I don't know what to do for that !!
Also, I have another problem as there is a lot of advertisement appears automatically which is so annoying. I need to stop this stupid adv. Can anyone here help me please.
I'm a new user for Sony brand and Android OS generally, I hope if you can help me.
Thanks,

That seems to be an app acting up, repair your phone with SUS or PCC > do NOT install any app for couple of hours > test your phone
Update Service (SUS)
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Ringback tone issue on outbound call with full E.164 number between 2 sites

Hi there.
We have been encounting issue where site A calling site B with full E.164 number users expereiencing no ringback tone on caller while phone is ringing on site B.
In CUCM, Route Pattern is configured to use TEHO for long distance call. For instance, if site A dial site B with full number with area code, call should be sending out via site B VG.
It was working fine until recently, there is no change made on VG nor in CUCM.
I have attached dial-peer config of site B, should i add below subcommand under all dial-peer # pots?
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
//Site B dial-peer config //
dial-peer voice 1 pots
description #### incoming calls ###
translation-profile incoming CoS-E1-CIRCUITS
incoming called-number .T
direct-inward-dial
port 0/0/0:15
dial-peer voice 2 pots
description ### outgoing calls ###
destination-pattern 0.T
port 0/0/0:15
dial-peer voice 3 voip
description ### PSTN call to CCM ###
destination-pattern 15..
voice-class codec 1
session target ipv4:10.x.x.x
dtmf-relay h245-alphanumeric
Thx
Fei

Yes I have expereinced this too..Even when you call an external number and the user rejects the call, you hear a normal ringback tone over sip trunks..I think the issue is that the ITSP sends a 183 session progress or 180 ringing even before knowing what the state of the called device is..
You can send us a debug ccsip messages for a test call and we will be able to know exactly what is going on
Please rate all useful posts
"The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

Hi, this is amit from india. just started using iphone 4s. i am observing that when an incoming call comes, the phone smtimes shows two virtual buttons of red and green color so as to attend or reject the call. but smtimes it just shows green button. why?

Hi, this is amit from india. just started using iphone 4s. i am observing that when an incoming call comes, the phone smtimes shows two virtual buttons of red and green color so as to attend or reject the call. but smtimes it just shows green button with a slider to attend the call and there is no red button to reject the call. is it a bug or some setting?

Because it behaves differently depending on whether the phone is locked (in standby) or unlocked (in use) when the call comes in.

Calls with no caller ID info still coming in...

I have Verizon digital voice. And this after having Vonage for years. Oh, how I sometimes wish I had never changed. Such as when I continually have phone calls ringing in that have "Unavailable" showing up on my TV screen and phone. I have set up my account so that calls with no caller ID available won't even ring. Perhaps someone here, another user or a VZ employee can explain this to me. I NEVER got a call that came in with no caller ID info when I had Vonage.
On another note, can someone else explain how numbers that are unpublished and unlisted, whether they are cell phones, home phones, or business phones, can be bought? For example, I would be really ticked off to find out, after paying for an unlisted and unpublished number, that someone can type my phone number in and buy my name, address, etc.
Thanks.

*77, or Anonymous Call Rejection (ACR), only rejects call that would show on caller ID as "anonymous" or "private". These are calls where the incoming caller ID information is there, but the caller has chosen to block it from appearing on your caller id display. *77 cannot block calls where there is no caller ID information sent, such as "unavailable", "unknown", or "out of area". These calls can only be screened with the optional feature Call Intercept.

Unable to answer calls with 3.0 OS

I posted this problem before with the 2.1 firmware here:
http://discussions.apple.com/thread.jspa?threadID=1722193
It appears to be even worse with 3.0, for me anyway. I just upgraded to 3.0 and out of my first 5 calls with it I had a hard time answering 4 of them. One of them was missed altogether. The slider just refused to slide. What can I say. I was so hopeful this would be fixed. Oh well.
BTW, my "sometimes successful workaround" (change the ringer switch position) didn't seem to help.

I have had this same problem. I had back on version 2, but thought it might be related to 3G phone being jailbroken. New 3GS does the same thing. Appears to happen mostly when the ringer is off. Sometimes the slider will move but everything stops with that, phone will not "pick up".
I also have used the same "sometimes workaround" flipping the ringer switch back and forth.

Rejecting a call with 7921

Similar Messages

Maybe you are looking for