Related to addition of zero

hi
i am facing the problem to add the 0's . the field length is 10. here is scenario's
g = 1. and the length of g is 10.
i want the output like +000000001.
if g = 55. output will be +000000055.
can anyone help me. It's urgent.

Sure.... if the result field is of type c, and you want leading zeros, all you need to do is move the value to a type n, field then back to type c.
data: c(10) type c value '1'.
data: n(10) type n.
n = c.
c = n.
write:/ c.

Similar Messages

A query on removing additionally padded zeroes from the pernr.

Hi ,
How can i remove the padded zeroes from the pernr, Ex pernr is 8 chars and if pernr has 6 chars it has to remove appended 2 zeroes from the left and should only print the 6 chars with no appended zeroes
Thanks

Hi Khaleel,
Use FM <b>CONVERSION_EXIT_ALPHA_OUTPUT</b>
Reward if useful.
Thanks
Aneesh.

Query Related to Addition Of Customer Specific Tab in Material Master

Hi Experts,
we had a requirement from our client to add certain specific fields in Material Master. we added all those fields in a "User Tab" created by copying "Basic Data Tab" & it's attributes in SPRO. After this was done the transaction was running fine but when we want to migrate to another tab say "Basic Data Tab" we are not able to do so as we are still on the same User Tab.
Please help me on this <removed by moderator>.
<removed by moderator>
Thanks & Regards
Priyesh Shah
Edited by: Thomas Zloch on Jun 29, 2011 11:06 PM - urgency reduced, please do not offer ...

Thanks for your reply.
I would like to know am using strategy 52 for this FG, so that i can have option to procure order specific components after sales order arrival, and components which are not specific to the order can be procured before sales order arrival. Where am confused is if am planning with FG1 i.e. am entering PIR for FG1 and am procuring order independent components before sales order arrival and suppose if the sales order arrives for FG2 for which components i have procured before sales order arrival is same but the remaining components which are order specific are different from that of FG1, then how the MRP shall behave. How the requirement for the FG2 shall be met. Kindly throw some light on this scenario.
Expecting a positive and prompt response.
Regards,
J K Tharwani

Additional 2 zeroes appear after flat file upload for New Taiwan Dollar

Hi,
Appreciate if anyone has encountered this issue when loading up flat file for New Taiwan Dollar currency. Example.
Flat File Data
0CHRT_ACCTS - SSG1
0COMP_CODE - TW80
0FISCYEAR - 2007
0FISCPER
0FISCPER3
0VERSION - 1
0VTYPE - 10
0CURTYPE - 10
0GL_ACCOUNT - 100050
ZBDGT_USD -
ZBDGT_LC
0LOC_CURRCY - TWD
ZAUDIT_LC - 815,537
After data is loaded into cube
0CHRT_ACCTS - SSG1
0COMP_CODE - TW80
0FISCYEAR - 2007
0FISCPER
0FISCPER3
0VERSION - 1
0VTYPE - 10
0CURTYPE - 10
0GL_ACCOUNT - 100050
ZBDGT_USD -
ZBDGT_LC
0LOC_CURRCY - TWD
ZAUDIT_LC - 81,553,700
Appreciate any assistance. Points will be rewarded if solution can resolve issue.
Best regards,
Eric Tang

Hi Simon,
Ok, this is the a line from the flat file
0CHRT_ACCTS - SSG1
0COMP_CODE - TW80
0FISCYEAR - 2007
0FISCPER
0FISCPER3
0VERSION - 1
0VTYPE - 10
0CURTYPE - 10
0GL_ACCOUNT - 100050
ZBDGT_USD -
ZBDGT_LC
0LOC_CURRCY - TWD
ZAUDIT_LC - 815,537
and this is what is shown in the listcube
0CHRT_ACCTS - SSG1
0COMP_CODE - TW80
0FISCYEAR - 2007
0FISCPER
0FISCPER3
0VERSION - 1
0VTYPE - 10
0CURTYPE - 10
0GL_ACCOUNT - 100050
ZBDGT_USD -
ZBDGT_LC
0LOC_CURRCY - TWD
ZAUDIT_LC - 81,553,700

AutoSize not working properly in TextField when using non-zero line spacing

When using non-zero line spacing, the autoSize property is not functioning as expected, causing text fields to scroll that shouldn't. Also, when using device fonts, the sizes of the TextFields are wrong in the Flash IDE.
I have a TextField whose height is supposed to be dynamic, depending the width of the TextField. wordWrap is true, the text is left aligned, and the autoSize value is flash.text.TextFieldAutoSize.LEFT.
When the TextField's width is adjusted, the height increases or decreases as expected, but when I scroll the mouse wheel over the TextField, it allows a single line to scroll out of view. This should not be happening. The autoSize property should ensure the TextField is large enough to neither require nor allow scrolling.
Has anyone else encountered this issue or know how to fix it?
Update: Been a problem since at least 2006! > http://blog.nthsense.net/?p=46
http://www.kirupa.com/forum/showthread.php?288955-Disabling-textfield-scrolling   Bug is caused by using a line height ("line spacing" in Flash) larger than zero, for example 1.0pt. It looks like when I reduce the line spacing of the text field to zero, the issue goes away. There doesn't seem to be anything wrong with how autoSize is calculating the required height of the text (i.e. it is exactly textHeight + 4 pixel gutter, and drawing the rectangle (2,2,textWidth,textHeight) aligns visually with the text), so it must have to do with how the TextField is deciding whether it needs to scroll or not, and that separate calculation is being thrown off by the non-zero line spacing. The additional non-zero spacing at the end of the last line could be making the TextField think it needs to scroll, even though it's hight is sufficient at "textHeight + 4". Apparently the problem manifests when using a non-zero leading value as well.
In fact, it has to be related to the leading value exactly, since the following code stops the textfield from scrolling.
//body is TextField
var tlm:TextLineMetrics = body.getLineMetrics(body.numLines - 1);
trace(tlm.leading); //traces "1" here. traces zero when line spacing is zero, and traces larger values with larger line spacing values
body.autoSize = flash.text.TextFieldAutoSize.NONE; //turn off autosize so the height can be set manually
body.height += tlm.leading; //increase height of textfield by leading value of last line to cause scrolling to be turned off.
Honestly, this is pretty unacceptable bug. First of all, scrolling should not be sensitive to trailing line spacing, because autoSize and textHeight do not include it. It need to be consistent, and I think textHeight and autoSize setting height = textHeight + 4 is correct. Vertical scrolling should use textHeight as it's guage for whether scrolling is necessary, but instead, it's obviously involving the leading values of the last line. At the very least, vertical scrolling should simply be disabled when autoSize is turned on and wordWrap is true, because the TextField should be big enough to fit all the text. The workaround of manually adjusting the height is also no good, since turning autoSize back on will immediately change the size back and trigger scrolling again. I also shouldn't have to set line spacing to zero just to use the autoSize feature, since the scrolling calculations are wrong in this way.

No, lol. Luckly, I replace most of my TextFields on the display list with my subclass TextFieldEx. I just call a clone method that accepts a TextField and returns a TextFieldEx with identical properties.
I corrected the problem via modifying the subclass to behave differently when autoSize is not NONE and wordWrap is true. Under those conditions, the maxScrollV and scrollV property values are fixed at 1, and the class listens for its own SCROLL event and sets scrollV to 1 when it occurs. That allows me to leave everything else alone, including text selection, and use whatever line spacing I want.
The modification seems to work fine so far.
For anyone interested in doing something similar, here is a clone method that will copy a TextField.
public static function clone( t:TextField ):TextFieldEx
                              var te:TextFieldEx = create( "", t.width, t.type, t.multiline, t.wordWrap, t.selectable, t.embedFonts, t.defaultTextFormat );
                              te.alpha = t.alpha;
                              te.alwaysShowSelection = t.alwaysShowSelection;
                              te.antiAliasType = t.antiAliasType;
                              te.autoSize = t.autoSize;
                              te.background = t.background;
                              te.backgroundColor = t.backgroundColor;
                              te.blendMode = t.blendMode;
                              //te.blendShader = t.blendShader;
                              te.border = t.border;
                              te.borderColor = t.borderColor;
                              te.cacheAsBitmap = t.cacheAsBitmap;
                              te.condenseWhite = t.condenseWhite;
                              te.displayAsPassword = t.displayAsPassword;
                              //te.embedFonts = t.embedFonts;
                              te.filters = t.filters;
                              te.gridFitType = t.gridFitType;
                              te.height = t.height;
                              te.opaqueBackground = t.opaqueBackground;
                              te.restrict = t.restrict;
                              //te.selectable = t.selectable;
                              te.sharpness = t.sharpness;
                              te.thickness = t.thickness;
                              te.transform = t.transform;
                              //te.type = t.type;
                              te.useRichTextClipboard = t.useRichTextClipboard;
                              //te.wordWrap = t.wordWrap;
                              //Assign text last
                              te.htmlText = t.htmlText;
                              return te;
//And the create method it uses
public static function create( text:String = "", width:Number = NaN, type:String = null, multiline:Boolean = false, wordWrap:Boolean = false, selectable:Boolean = true, embedFonts:Boolean = false, font_or_textformat:*=null, size:Object=null, color:Object=null, bold:Object=null, italic:Object=null, underline:Object=null, url:String=null, target:String=null, align:String=null, leftMargin:Object=null, rightMargin:Object=null, indent:Object=null, leading:Object=null ):TextFieldEx
                              var tf:TextFieldEx = new TextFieldEx();
                              tf.width = isNaN(width) ? 100 : width;
                              tf.defaultTextFormat = (font_or_textformat is TextFormat) ? (font_or_textformat as TextFormat) : new TextFormat( font_or_textformat as String, size, color, bold, italic, underline, url, target, align, leftMargin, rightMargin, indent, leading );
                              tf.embedFonts = embedFonts;
                              tf.multiline = multiline;
                              tf.wordWrap = wordWrap;
                              tf.selectable = selectable;
                              tf.type = type;
                              tf.text = text; //setting text last ensures the text line metrics returns correct values
                              //Initialize the TextField's size to fit the text.
                              if (!multiline)
                                        //When in single-line mode and no specific width is given,
                                        //expand width to entire line.
                                        if (isNaN(width))
                                                  tf.width = tf.textWidth + 4; //match width of text
                              //Height is always automatically adjusted to fit the text by default.
                              //It's better than the arbitrary 100px default height.
                              var minimum_height = tf.getLineMetrics( 0 ).height;
                              var h:Number = tf.textHeight;
                              tf.height = (h < minimum_height) ? (minimum_height + 4) : (h + 4); //match height of text, ensuring height is at least enough to display one line, even if there is no text
                              return tf;

Additive costs

Hi friends,
We have an issue related to Additive Cost. some costs which have been put live in the system since go-live have used additive costs to deliver the fixed ohd into the product cost instead of the purchase order condition type and
when conducting a cost roll up (CK40N), we were finding that we were getting 2 lots of additive cost because we have loaded new additive cost values from 1st may but we think the reason is that the we have loaded additive costs via the upload (CK74) but they are also pulling from the purchase order condition type so we are getting two lots of cost.
So we think the fix is that purchasing must update their condition types and we realised that the additive costs shouldn't have been loaded and we have deleted the additive costs because they never should have been loaded.
So advise me do we need to stop to upload or any other way to stop two times cost values.
Raju

Freight cost is added on to the basic standard cost of materials, which is fine. Basic cost of materials comes from regular cost estimate and the freight from additive. Now when a purchase order is raised, the vendor needs to be given a purchase order only for the basic price and not the freight. The material could be brought by own transport or the vendor charging separately for freight.
That being the assumption, the purchase order is loaded with a accrual type condition type for freight, which shall customized to create an accrual entry upon purchase. This could be meaningful to reduce/avoid the unwanted effect of distorted purchase price variance.

Additional data in Customer master to be mandatory field

Hi SAP Gurus,
I've a requiremnt of setting the additional data fields as mandatory in Customer master "Sales area" data.
I have checked in the standard config were there is no settings related to additional data in the Std configuration
(account group)
Finaly, I found an include program - LV02ZOKV for this requirement to do the changes through ABAP programe.
(to activate field us Mandatory)
May I know is this the correct approach for this requirement or in case if you have better requirement could
you please share with me to avoid the unnecessary impacts.
Thanks in Advance.
Thanks & Regards
Pugal

Hi Thomas,
Thank you!!
I have recently got a programe - SAPLV02Z, I think this will help me out..
Thanks & Regards,
Pugal

Additional tab b

Hi SDNs
Here my client faceing one issue related to additional tab b,the issue is when my client created repair order with service notification the additional data tab B comes without fields means the tab showing empty.
When my client creates repiar order with out reference srvice notification the additional data tab B comes with all fields
So please suggest . where is the problem

Not required any answer

Exel XML Export Totals Adding Five Zeros

Hello,
When we are exporting FBL5N to Excel using the Excel XML format the totals are exporting to Excel with an additional five zeros added to the total lines. The line items are exporting correctly it is only effecting the total lines. Please see the below example. I have tried changing my decimal Notation to US domestic standards (1,234,567.89) and this did not change anything. Is anyone else experiencing this and has anyone found a fix for this? Our business users need this report for audit work.
8,130,894.71 exports as 81308947100000

Hello,
Please check the recommendations of note 1456224. If you're in release
701 with SP5 ( SAP_BASIS ) you should implement SP 06 or at least the
folliwing notes:
1391325, 1393974, 1394178 and 1400534.
The problem is not with FBL5N. It happens because of the ALV functionality used by FBL5N.
REGards,
Renan Correa

Additional compensation

Hi
I have a issue relating to additional compensation.We want to pay extra amount to the employees who are not covered under OT. The amounts depends on the no of extra hours worked and Basic salary. Each grade have different rates of payment.eg G1 grade:Rs.37.50p per hour, G2grade:Rs.25.00ps per etc. How to configure /customize the issue.
Request inputs step wise
Thanks
EKPYadav

Hi
In payroll, we have to use the option like
Time Wage Type Valuation " Constant based on Payscale Type and Paysale Area.
Otherwise write a custom PCR.
Regards
Venu

ABAP/4 Keywords for all SAP R/3 Versions

Hello Experts,
      Is there any DB Table available in Data Dictionary where all these ABAP/4 Keywords available; if yes do please let me know if not available then do please provide me with all ABAP/4 Keywords of all versions of SAP R/3 if possible
points will be awarded if helpful.
Thanks in Advance

Hello Arif,
There no particular table to check all the key words in ABAP.
To check system fields Go for
Se11-- SYST.
TO get the key words go to ABAPDOCU- type ur required key word in the search given in the last section.
The best option would be to debug ABAPDOCU, when you do a click on Keywords
Or Check the Pooled table : TSE05
As you must be knowing ABAPDOCU is in SABAPDOCU Package.....!!
There are a number of tables used; like ABTREE,etc !
Explore and find whether you can get some clue!
Find the keywords here...
Keywords     Description
, [, ], {, }     Syntax conventions, Syntax notation
*, "     Comments
**     Arithm. Operator: Exponentiation (COMPUTE)
+, -, *, /     Arithmetical operators (COMPUTE)
->, =>, ->>, ~, ?=     Operators in ABAP Objects
ABS     Mathematical function: Absolute amount COMPUTE)
ACOS     Mathematical function: Cosine arc (COMPUTE)
ADD     Add
ADD-CORRESPONDING     Field string addition
ADJACENT DUPLICATES     Delete duplicates from internal table (DELETE)
AND     Comparison operator: and
ANY TABLE     Generic table type for internal tables
APPEND     Append line to internaltable
ASIN     Mathematical function: Sine arc (COMPUTE)
ASSIGN     Assign field symbol
AT     Event, control break, field group determination
ATAN     Mathematical function: Tangent arc
AUTHORITY-CHECK     Check authorization
AVG     Aggregate expression: Average (SELECT)
BACK     Positioning in list
BETWEEN     Relational operator: Between
BINARY SEARCH     Binary read of internaltable (READ TABLE)
BIT-NOT     Bit calculation operator: NOT (COMPUTE)
BIT-AND     Bit calculation operator: AND (COMPUTE)
BIT-OR     Bit calculation operator: OR (COMPUTE)
BIT-XOR     Bit calculation operator: AND/OR (COMPUTE)
SET BIT     Set bit of an X field
GET BIT     Read bit of an X field
BLANK LINES     Switch on blank lines in list
BREAK-POINT     Stop processing in debug mode
C     Data type for fixed-length character string
CA     Contains any characters -Relational operator forstring comparison
CALL     Call external component
CASE     Begin case distinction
CATCH     Exception handling (catch runtime errors)
CEIL     Mathematical function: Smallest whole value
CENTERED     Output format: Centered(WRITE)
CHECK     Check condition
CHECKBOX      Display as checkbox
PARAMETERS ... AS CHECKBOX     on the selection screen
WRITE ... AS CHECKBOX     in a list
CLASS     Definition of a class
CLASS-DATA     Static attributes in classes
CLASS-METHODS     Static methods in classes
CLASS-EVENTS     Static events in classes
CLASS-POOL     Introduction for type Kprograms
CLEAR     Initialize data object
CLIENT      Client handling when
DELETE ... CLIENT SPECIFIED     deleting from a database
EXPORT ... TO DATABASE ... CLIENT     Storing a data cluster
IMPORT ... FROM DATABASE ... CLIENT     Reading a data cluster
EXPORT ... TO SHARED BUFFER ... CLIENT     Storing a data cluster
IMPORT ... FROM SHARED BUFFER ... CLIENT     Reading a data cluster
INSERT ... CLIENT SPECIFIED     inserting into a database
MODIFY ... CLIENT SPECIFIED     Insert/Modify in database(s)
SELECT ... CLIENT SPECIFIED     reading from a database
UPDATE ... CLIENT SPECIFIED     updating a database
CLOSE     Close file/cursor
CN     Contains Not Only - Relational operator for character comparison:
CNT     Field groups: Number ofdifferent values
CO     Contains Only - Relational operator for character comparison:
CODE PAGE              Character set
TRANSLATE ... FROM/TOCODE PAGE     Translate character codes
COLLECT     Internal table: Add entries
COLOR     Output format: Color (FORMAT)
COMMENT                  Comment on selection screen
SELECTION-SCREEN COMMENT     Generate comment
COMMIT     Close processing unit
COMMUNICATION     Data exchange
COMPUTE     Perform calculations
CONCATENATE     Concatenate character fields
CONDENSE     Condense character fields
CONSTANTS     Defing constants
CONTEXTS     Communicate contexts
CONTINUE     Exit current loop pass
CONTROLS     Define controls for visualization
CONVERT     Convert fields
COS     Mathematical function: Cosine (COMPUTE)
COSH     Mathematical function: Hyperbola cosine (COMPUTE)
COUNT     Aggregate expression: Count (SELECT)
COUNTRY     Set country ID (SET)
CP     Relational operator forcharacter comparison:
DATABASE                Contains Pattern
CREATE     Generate an object or data object
CS     Contains character - Relational operator forcharacter comparison
CURRENCY     Output format: Correct format for currency (WRITE)
CURSOR                   Cursor
CLOSE                Close database cursor
FETCH NEXT CURSOR     Read lines with a database cursor
GET CURSOR FIELD       Get field name
OPEN CURSOR            Open database cursor
SET CURSOR            Position cursor
CUSTOMER-FUNCTION      Call customer enhancement
DATA     Define data
DATABASE               Data cluster
DELETE FROM DATABASE       Delete from a database table
EXPORT ... TO DATABASE        Store in a databasetable
IMPORT ... FROM DATABASE     Read from a database table
DATASET                 Sequential file
CLOSE DATASET          Close file
DELETE DATASET       Delete file
EXPORT ... TO DATASET        Store data cluster in file
IMPORT ... FROM DATASET      Read data cluster from file
OPEN DATASET    Open file     Open file
READ DATASET        Read from a file
TRANSFER      Output to a file
DECIMALS     Output format: Places after the decimal point - (WRITE)
DEFINE     Define macro
DELETE     Delete from tables or from objects
DEMAND     Request information from a context
DESCRIBE     Determine attributes ofdata objects
DIALOG     Call a dialog module (CALL)
DISTINCT            Duplicates
SELECT DISTINCT          Selection set without duplicates
AVG( DISTINCT ... )        Average without duplicates (SELECT)
COUNT( DISTINCT ... )        Sequential file
MAX( DISTINCT ... )      Maximum without duplicates (SELECT)
MIN( DISTINCT ... )      Minimum without duplicates (SELECT)
SUM( DISTINCT ... )     Sum without duplicates (SELECT)
DIV     Arithmetic operator: Whole number division
DIVIDE     Divide
DIVIDE-CORRESPONDINGField string division     Field string division
DO     Loop
DYNPRO               Screen      Screen
DELETE DYNPRO    Delete     Delete
EXPORT DYNPRO    Export     Export
GENERATE DYNPRO    Generate     Generate
IMPORT DYNPRO    Import      Import
SYNTAX-CHECK FOR DYNPRO   Check     Check
EDITOR-CALL     Call editor
ELSE     Query
ELSEIF     Query
END-OF-DEFINITION     End of a macro definition
END-OF-PAGE     Event: End of page handling in lists
END-OF-SELECTION     Event: After processingof all records in a LDB
ENDAT     End of an event introduced by AT
ENDCASE     End of case distinction
ENDCATCH     End of exception handling
ENDDO     End of a DO loop
ENDEXEC     End of a Native SQL statement
ENDFORM     End of a subroutine
ENDFUNCTION     End of a function module
ENDIF     End of a query
ENDINTERFACE     End of an interface definition
ENDLOOP     End of a LOOP
ENDMODULE     End of a module definition
ENDON     End of a conditional statement
ENDPROVIDE     End of a PROVIDE loop
ENDSELECT     End of a SELECT loop
ENDWHILE     End of a WHILE loop
EQ     Relational operator: Equals
EXEC SQL     Native SQL statement
EXIT     Exit loop or terminate processing
EXP     Mathematical function: Exponential function
EXPONENT     Output format: Exponentdisplay (WRITE)
EXPORT     Export data
EXTENDED CHECK     Switch extended syntax check on/off (SET)
EXTRACT     Generate extract dataset
FETCH     Read line from a database table
FIELD-GROUPS     Define field groups
FIELD-SYMBOLS     Define field symbols
FLOOR     Mathematical function:Largest whole value
FORM     Define subroutine
FORMAT     Output format for lists
FOR UPDATE     Read database table with lock (SELECT)
FRAC     Mathematical function: Fraction (COMPUTE)
FREE     Release resources no longer needed
FUNCTION     Define function module
CALL FUNCTION     Call function module
FUNCTION-POOL     Introduction for type Fprograms
GE     Relational operator: Greater than or equal
GENERATE     Generate a program or screen
GET     Event, read settings
GT     Relational operator: Greater than
HASHED TABLE     Table type for internalhashed tables
HEADER LINE     Define an internal table with header line (DATA)
HELP-ID                Help ID for F1 help
DESCRIBE FIELD ... HELP-ID      Determine help ID
HELP-REQUEST              Self-programmed help (F1)
PARAMETERS ... HELP-REQUEST          for parameters
SELECT-OPTIONS ... HELP-REQUEST      for selection options
HIDE     Store line information
HOTSPOT     Output format: Hotspot,interaction by simple - mouse click (FORMAT)
ICON     Icons in lists
IF     Query
IMPORT     Import data or a screen
IN     Relational operator: Selection criterion
INCLUDE     Include program components
INDEX                    Line index in an internal table
INDEX TABLE
DELETE ... INDEX     Delete line
INSERT ... INDEX     Insert line
MODIFY ... INDEX     Modify line
READ TABLE ... INDEX     Read line
INFOTYPES     Declare HR info type
INITIAL     Relational operator: Initial value
INITIAL SIZE     Define an internal table type (TYPES)
INITIALIZATION     Event: Before display of the selection screen
INPUT     Output format: Ready for input (FORMAT)
INSERT     Insert into tables or objects
INTENSIFIED     Output format: Intensified (FORMAT)
INTERFACE     Definition of an interface
INTERFACES     Class component interface
INTERFACE-POOL     Introduction fortype J programs
INVERSE     Output format: Inverse (FORMAT)
IS                 Relational operator
IS ASSIGNED      Relational operator: Is the field symbol assigned?
IS INITIAL             Relational operator: Initial value
IS REQUESTED          Relational operator: Existence of a formal
parameter
JOIN     Join (SELECT)
LANGUAGE     Set language for text elements (SET)
LE     Relational operator: Less than or equal
LEAVE     Leave processing
LEFT-JUSTIFIED     Output format: Left-justified (WRITE)
LIKE                     Use an existing field as areference
TYPES ... LIKE     Create a type
DATA ... LIKE     Create a field
LINE                      Line in a list
MODIFY LINE     Modify line
READ LINE             Read line
LINE-COUNT     Number of lines per page (NEW-PAGE)
LINE-SIZE     Line size (NEW-PAGE)
LIST-PROCESSING          List processing (LEAVE)
LOAD     Load program componentsin internal table
LOAD-OF-PROGRAM          Execution at load time
LOCAL     Rescue actual parameters of a subroutine
LOCAL COPY     Assign local copy to a field symbol
LOCALE     Set text environment (SET)
   SET LOCALE     Set text environment
   GET LOCALE     Determine text environment
LOG     Mathematical function: Natural logarithm (COMPUTE)
Logical condition
SELECT ... WHERE         when reading database tables
UPDATE ... WHERE         when changing database tables
DELETE ... WHERE         when deleting fromdatabase tables
SELECT ... FROM ... ON       when reading usinga join
LOG10     Mathematical function: Base 10 logarithm (COMPUTE)
LOOP     Loop
LT     Relational operator: Less than
M     Relational operator: Byte contains zeros and ones
MARGIN     List output: Distance from edge (SET)
MATCHCODE            Matchcode handling
PARAMETERS ... MATCHCODE          for parameters
SELECT-OPTIONS ... MATCHCODE      for selection options
MAX     Aggregate expression: Maximum (SELECT)
MEMORY                    ABAP/4 memory
EXPORT ... TO MEMORY      Roll out data to memory
IMPORT ... FROM MEMORY     Restore data from memory
MESSAGE     Output message
MESSAGE-ID     Specify message class (REPORT)
METHOD     Definition of a method
METHODS     Class component method
MIN     Aggregate expression: Minimum (SELECT)
MOD     Arithmetic operator: Remainder after division
     (COMPUTE)
MODIFY     Modify tables or objects
MODULE     Flow logic: Module
MOVE     Assignment
MOVE-CORRESPONDING      Component-by-component assignment
MULTIPLY     Multiply
MULTIPLY-CORRESPONDING     Field string multiplication
NA     Relational operator forcharacter comparison:
     Contains not any characters
NE     Relational operator: Not equal
NEW-LINE     List processing: New line
NEW-PAGE     List processing: New page
NODES     Interface work area forlogical databases
NO-GAP     Output format: Leave nogaps (WRITE)
NO-HEADING     Display no column headers (NEW-PAGE)
NO-SCROLLING     Do not scroll line (NEW-LINE)
NO-SIGN     Output format: No preceding signs (WRITE)
NO-TITLE     Do not display standardpage header (NEW-PAGE)
NO-ZERO     Output format: No leading zeros (WRITE)
NON-UNIQUE               Defines an
TYPES     internal table type
DATA                   internal table object
NP     Relational operator forcharacter comparison:
     Does not contain pattern
NS     Relational operator forcharacter comparison:
     Does not contain character
O     Relational operator: Byte positions occupied by1
OBJECT                External object
CREATE OBJECT     Generate
FREE OBJECT      Release
OCCURS      Defines an
TYPES     internal table type
DATA                   internal table object
ON CHANGE     Control break
OPEN     Open file/cursor
OR     Relational operator: OR
ORDER BY     Sort table rows (SELECT)
OVERLAY     Overlay character fields
PACK     Conversion
PARAMETER                Parameter in global SAP memory
GET     Read parameter
SET     Set parameter
PARAMETERS     Define report parameters
PERFORM     Execute subroutine
PF-STATUS     Set GUI status
POSITION     List processing: Defineoutput position
PRINT     Print formatting (NEW-PAGE)
PRINT-CONTROL     Define print format
PRIVATE     Class area not visible from outside
PROGRAM     Introduction for type Mand S programs
LEAVE PROGRAM     Leave program
PROPERTY                 Object property
GET PROPERTY     Get property
SET PROPERTY     Set property
PROVIDE     Internal tables: Interval-related processing
PUT     Trigger event
RADIOBUTTON     Radio button (PARAMETERS)
RAISE     Raise exceptions and events
RAISING     Raise error message in function module
RANGES     Define internal table for selection criterion
READ     Read tables or objects
RECEIVE     Receive results (RFC)
REFRESH     Delete internal table
REFRESH CONTROL     Initialize control
REJECT     Do not process current database line further
REPLACE     Replace characters
REPORT     Introduction for type 1programs
DELETE REPORT         Delete program
EDITOR-CALL FOR REPORT        Call ABAP program editor
INSERT REPORT        Insert program in library
READ REPORT        Read program
RESERVE     List processing: Conditional new page
RESET     Output format: Reset all formats (FORMAT)
RIGHT-JUSTIFIED     Output format: Right justified (WRITE)
ROLLBACK     Roll back database changes
ROUND     Output format: Scaled (WRITE)
RTTI     Runtime type identification
RUN TIME ANALYZER     Activate/Deactivate runtime analysis (SET)
SCAN     Analyze ABAP/4 source code
SCREEN            Screen
CALL SCREEN     Call screen
SET SCREEN     Set next screen
LEAVE SCREEN     Leave screen
LEAVE TO SCREEN     Branch to a screen
LOOP AT SCREEN     Loop through screen fields
MODIFY SCREEN     Modify screen fields
SCROLL     List processing: Scroll
SCROLL-BOUNDARY          List processing: Fix lead columns (SET)
SEARCH     Find character
SELECT     Read database table
SELECT-OPTIONS           Define selection criterion
SELECTION-SCREEN     Design selection screen
AT SELECTION-SCREENEvent:     After editing ofselection screen
SHARED BUFFER           Cross-transaction application buffer
DELETE FROM SHARED BUFFER         delete from application buffer
EXPORT ... TO SHARED BUFFER      Store data in application buffer
IMPORT ... FROM SHARED BUFFER     Read data from application buffer
SELECTION-TABLE     Selection table (SUBMIT)
SET     Set different processing parameters
SHIFT     Move character
SIGN     Mathematical function: Sign (COMPUTE)
SIN     Mathematical function: Sine (COMPUTE)
SINGLE     Select single record (SELECT)
SINH     Mathematical function: Hyperbola sine (COMPUTE)
SKIP     List processing: Outputblank line
SORT     Sort internal table or extract dataset
SORTED TABLE     Table type for internaltables that are always kept
SPLIT     Split character fields
SQRT     Mathematical function: Square root (COMPUTE)
STANDARD TABLE     Table type for standardinternal tables
START-OF-SELECTION     Event: Before first access to LDB
STATICS     Define static data
STOP     Stop data selection (LDB)
STRING     Data type for variable-length character sequence
STRLEN     Character function: Current length (COMPUTE)
STRUCTURE         Data structure
INCLUDE STRUCTURE     Use structure
SUBMIT     Program call
SUBTRACT     Subtract
SUBTRACT-CORRESPONDING     Field string subtraction
SUM     Calculate control total
SELECT ... SUM     Aggregate expression: Total
SUPPLY     Supply context key fields
SUPPRESS DIALOG     Suppress dialog
SYMBOL     Output as symbol (WRITE)
SYNTAX-CHECK     Syntax check for programs and screens
SYNTAX-TRACE     Syntax check log
SYSTEM-CALL     Call to various system services
SYSTEM-EXCEPTIONS       Catch runtime errors (CATCH)
TABLE LINE               Unstructured lines in internal tables
TABLE_LINE               Unstructured lines in internal tables
TABLES     Declare database table
TABLE                    Set or array operations for database tables
DELETE ... FROM TABLE     Delete block of lines
INSERT ... FROM TABLE     Insert block of lines
MODIFY ... FROM TABLE     Insert/update block of lines
UPDATE ... FROM TABLE     Update block of lines
SELECT ... INTO TABLE     Copy block of lines to internal table
TAN     Mathematical function: Tangent (COMPUTE)
TANH     Mathematical function: Hyperbola tangent (COMPUTE)
TEXT      Locale-specific
CONVERT TEXT     Set format
SORT itab AS TEXT     Sort an internal table
SORT AS TEXT     Sort an extract dataset
TEXTPOOL                 Text elements
DELETE TEXTPOOL     Delete
INSERT TEXTPOOL     Insert
READ TEXTPOOL     Read
TIME                     Time measurement
GET RUN TIME     Get runtime
GET TIME     Get time
SET RUN TIME ANALYZER     Switch runtime analysison/off
TIME STAMP               Time stamp
GET TIME STAMP     Get time stamp
CONVERT TIME STAMP     Convert time stamps to date/time
WRITE f TIME ZONE     Output of time stamps to lists
TITLEBAR     Set screen title (SET)
TOP-OF-PAGE     Event: Top of page handling in lists
TRANSACTION              SAP transaction
CALL TRANSACTION     Call
LEAVE TO TRANSACTION     Leave to
TRANSFER     Output to file
TRANSLATE     Character conversion incharacter fields
TRANSPORTING      Selective field transport
MODIFY ... TRANSPORTING     Modify lines of an internal table
READ   ... TRANSPORTING     Read lines of an internal table
LOOP   ... TRANSPORTING     Loop through an internal table
TRUNC     Mathematical function: Whole number part (COMPUTE)
TYPE                     Define a type
TYPES ... TYPE     Define a type
DATA ... TYPE     Define a field
TYPE-POOL     Introduction for type Tprograms
TYPE-POOLS     Include type group
TYPES     Define types
ULINE     List processing: Underscore
UNDER     Output format: One under the other (WRITE)
UNIQUE           Define an
TYPES     internal table type
DATA                   internal table object
UNIT     Output format: Unit (WRITE)
UNPACK     Conversion
UPDATE     Update database table
USER-COMMAND     List processing: Execute command immediately (SET)
USING                    Use parameter or format
USING                  Parameter of a subroutine
USING EDIT MASK     Output format: Use template (WRITE)
VALUE-REQUEST            Self-programmed value help(F4)
PARAMETERS ... VALUE-REQUEST          for parameters
SELECT-OPTIONS ... VALUE-REQUEST      for selection options
WHEN     Case distinction
SELECT ... WHERE      when reading from databasetables
UPDATE ... WHERE      when changing database tables
DELETE ... WHERE      when deleting database tables
LOOP AT ... WHERE     when looping at internal tables
DELETE ... WHERE       when deleting from internal tables
WHILE     Loop
WINDOW     List processing: Outputin window
WITH-TITLE     Output standard page header (NEW-PAGE)
WORK                     Processing unit
COMMIT WORK     Close unit
ROLLBACK WORK     Close unit, but undo changes
WRITE     List processing: Output
WRITE TO     Correct type output in a variable
X     Data type for fixed-length byte sequence
XSTRING     Data type for variable-length byte sequence
Z     Relational bit operator: Bit positions occupiedby
Regards
Sasidhar Reddy Matli.

Pricing Copy control

Hi can anyone explain me working of pricing copy control ?
Especially significance of condition control H and F in pricing copy control
Thank you

Dear Nikhil
While carry out billing, you can determine the basis for billing based on the data you maintain in "Billing Quantity" of Copy Control.
A: Relevant for delivery-related billing documents
Outbound delivery is the basis for billing. The billing document status is only updated in the outbound delivery.
B: Relevant for order-related billing documents
The sales document is the basis for billing. The billing status is defined by the required quantity.
In the standard system the item categories REN (returns) and BVN (cash sales) are set up in this way.
C: Relevant for order-related billing documents
The sales document is the basis for billing. The billing status is defined by the target quantity.
In the standard system the item categories G2N (credit memo) and L2N (debit memo) are set up in this way.
D: Relevant for pro forma
To create a pro forma invoice, the billing relevance indicator must be blank. In addition, indicator D for cross-company code business processing should be used as follows:
In the case of free-of-charge outbound deliveries, an internal allocation should be made to the company code for the delivery.
The indicator D allows you to make free-of-charge outbound deliveries.
F: Relevant for order-related billing documents - Status according to the invoice receipt quantity
Relevant for order-related billing on the basis of the invoice receipt quantity (third party business transaction). The system only puts the order into the billing due list, if in Purchasing the invoice has been received from the vendor and processed. After every invoice receipt, a customer invoice is created in addition to the quantity given in the incoming invoice. The order applies until the next invoice comes in from the vendor.
In the standard system, the item category TAS (third party business transaction) is set up in this way.
Alternatively this procedure can refer to the quantity of goods received.
You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing by carrying out copying control for billing at item level in the billing quantity field.
G: Relevant for order-related billing of the delivery quantity
The order is relevant for billing, but the cumulated quantity already delivered. This means that you can bill a number of partial deliveries in one transaction.
H: Relevant for delivery-related billing documents - no zero quantities
You can use this to prevent items with zero amount being included in the billing document.
I: Relevant for order-related billing documents - billing plan
Billing is carried out using the billing plan and its status. The status of the order item is understood to be the total status of the billing plan billing statistics.
In the standard system, the item categories WVN (Service), MVN (rent) and TAO (milestone billing) are set up in this way.
J: Relevant for cross EC country deliveries.
thanks
G. Lakshmipathi

UK Payroll :Pension issue

Hi Experts,
This is related to Additional Voluntary contributions.When an employee is on whole month unpaid leave and there is an entry in InfoType 71,Additional Voluntary Contributions,Flat rate,this is calculated and shown on the payslip although the emp doesnt have sufficient amount (as he is on unapid leave whole month).
We tried putting the wage type in the arrears table(V_T51P6)So that it will not deduct that amount for the month he is on unpaid leave but still its deducting.
Any help on this would be appreciated with higher points?
Thanks in Advance,
Dharani

Hello
Please refer to the SPRO node of the IMG,where you need to maintain the entries for the pension scheme implementation.
Payroll>payroll great britain>Pension Schemes.
Here you need to maintain all required customising for the pension schemes.
Band numbers are used in the calculation of Percentage and Mixed-rate Pension Scheme contributions
Pension Band Level.
The band levels divide the pensionable pay into bands. The band levels can be set at the figures of your own choice.
The band levels are used in the case of Percentage Pension Schemes to calculate the percentage contribution amounts from each band.
With a Mixed-Rate Pension Scheme either a flat-rate or a percentage contribution will be calculated from each band of the employee's salary.
Regards

Withholding tax Amount not being displayed in the Invoice while posting a Parked Document

Hi,
I have created a parked document for the Vendor who has the Witholding tax code w9 - 15% . I created Parked Document using FBV1 and then tried posting the same using FBV0.Somehow I am not getting the Withholding tax Amount in the FI Document created. However the W/Tax Base Amount and the W/ Base LC are being displayed correctly.
Say if the Line item Amount is 1,000$ then both the amounts mentioned above in the Additional tab "Withholding tax Data" are being displayed as 1,000 usd but the W/Tax Amount is 0,00 USD.
2. Also We have the PI and the Interface is written to post the Parked document while the xml file. There is a Method Execute_Asynchronous which has two BDCs one for FBV2 ( Change Parked Document ) followed by the Post Parked Document FBV0. Hence When I try to post the Parked Document using the SPROXY Interface which has two BDCs Viz FBV2 & FBV0 I still get the Invoice with the Same Amounts and at times with additional 2 zeros added to it in the Additionsal Tax Data Screen.
I am not sure what is the reason for this. Can anybody help me sort out this Issue.
Can there be any Config issues. Please let me know what all config Settings we need to do to sort out this Issue.
Also let me know why the 2 Zeros are getting added to the Base Amount e.g if the Vendor Line item is 12,000 USD it shows as 12,00000.00 in the Withholding tax Data Tab in the Invoice.
Regards,
Deepak.

Dear Praveen,
please check into IMG if You defined the WT type You are using for Your Comapny code:
IMG --> Assign Withholding Tax Types to Company Codes
I hope this helps.
Mauri

Satellite C650 - Lemonish?

I have a Toshiba Satellite C650 that I got as a Christmas gift in December. Everything worked fine with it until one day at the end of April. I used the computer in the morning, closed it, went to an appointment for about an hour. When I came home and opened it up again it was on a black screen with a blue box asking for a HDD/SDD Password, I tried every password I have ever used and nothing worked. I called Toshiba Tech Support and the woman told me it is a hardware issue, that the hard drive needed to be replaced and it is covered under the warranty.
I asked her if she was sure, because she had said the hard drive set up the password on it's own because it had been damaged. She said she was 100% sure that the hard drive can set up a password to protect itself if it breaks.
I sent in my laptop overnight to the Louisville address, via UPS go figure, UPS are the people who actually fix the laptops. So I paid them $100 to overnight it to themselves... That's a different story.
So a short while after I got the Unit received email from Toshiba, I got another email saying that because there is a HDD password, my repair is not covered under warranty. Now remember, that is the whole reason I sent it in to be fixed. But now they want me to pay $175.99 to get it fixed. I called and spoke to the Customer Relations department, they were ZERO help. The woman told me that there is NO way that the hard drive can set up a password on its own. That I MUST of set up the password and forgot and that because there is a password it is not covered. I asked to speak to a supervisor, and she actually said to me that "it is illegal for someone to come to my desk and use my phone." She REFUSED to let me speak to a supervisor and then when I told her I was going to complain to the BBB she said I was going to get her fired because she told me she was located in Utah and then hung up on me. I called back and spoke to someone else who told me that BIOS is a NEW system and that when the computer is first booted up that it prompts you to set up an HDD password, and if you don't set up the password then it wont start up. I told him that I have never had to do that with any of my computers that I have owned nor did it ask me to do that with this laptop. But he insisted that BIOS was new and it is a software issue so therefore it is not covered. Then I asked him why the computer would suddenly out of the blue ask me for a HDD password, he said because of a hard ware issue. So it is a hardware issue, yet it is not covered because Toshiba does not want to cover there mistakes with someones valid warranty.
So this is my question, has anyone else had an issue like this? I know BIOS is not new, but does anyone know why the laptop would of just suddenly asked for a HDD password, do you know if you must set up a HDD password when you forst boot the computer? Anyone had such a bad experiance with Toshiba customer relations?
Oh BTW, I paid just to get my laptop back that was 6 days ago, I called today and my repair is still on quote hold because no one told the repair depot that I paid. So now I have to wait another 10 business days for them to even fix it. I will never buy Toshiba again, not after being lied to and cheated out of $175.99.

Sorry to hear about all that trouble! Can you send me a PM with your name, case number, contact information, and laptop information (model number, model-part number, serial number if you have them)? I'd like to try to help. You can click my name to see my profile and then click the link on the right to send me a PM.
- Peter

Related to addition of zero

Similar Messages

Maybe you are looking for