Related to ms-access
hi,
i have a button in a vi, called retrieve.
so whenever I click that particular button, list box is getting opened and in that list box i was able to retrieve values from the ms-access table. so whenever i click one value from that list box, that particular value should appear in a vi where retrieve button is there. how can i do this?
below is my attached vi.
please check the code in the attahced vi.
InAdvance Thanks
Regards
Soundarya
Attachments:
list.vi 118 KB
systemslno.vi 17 KB
Hi Soundarya,
wait for a "mouse-click" or "value change" event of your listbox, then read it's value.
Send this value to the main loop by using a global (beware of race conditions), FGV, notifier, or queue...
Btw. this is not at all related to ms-access... How should others find this thread when searching for similar problems?
And why don't you stick with your original thread(s)?
Message Edited by GerdW on 07-29-2009 09:29 AM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Similar Messages
-
Error in Account related information sections Access denied.(SBL-DAT-00553)
Hi,
I have 2 users, 1 from Spain and the other from Italy.
The spanish user is the owner of an account and adds the user from italy to the account team section with full access to the account.
The italian user is able to view the account. However the italian user is not able to view any of the custom objects in the related information sections below the account information.
The error is as follows:
Access denied.(SBL-DAT-00553)
Both users have the same role. However, if he/she is not the owner of the account but only a 'Team' member, he's able to view the account but not the CO's below the account. I've checked the access profiles and roles and it all seems fine. Oracle support confirmed this as well as both users were able to search and view the CO records without any issues. It's just that it hits the error if it's in the related information section.
I was just wondering if I'm missing any settings for customer team.
Currently, I'm not even sure if Customer team functionality was built for use with custom objects in related information sections.
Any help would be greatly appreciated!Hi, What i meant is, if you are using C04 - C015 objects, then ensure under related sections of Accounts in "Full" access profile, you set it as "View" or "Read-Only" instead of "No Access". "No Access" is what being set by OnDemand by default even though the access profile is named as "Full"
-- Venky CRMIT -
Error # 3021 - Invalid Relation. --- MS Access to Oracle APEX
Hello everybody.
I have 3 years working with Oracle APEX and now I have the need to migrate an Access database to Oracle and APEX.
I have:
- MS Access 2003 database
- Oracle SQL Developer 3.0.04.34
- Oracle 10g Database
I will try to provide all the relevant information.
I used the Access Exporter for Access 2003 tool from Oracle SQL Developer to creat both .xml (for SQL Dev) file and .sql file (for APEX) but the process show me an error mesassge that said: "Error # 3021 - Invalid Relation. No current record".
I read in OTN forum that it was because the migration tool can not access the system tables and that I need to modify permisions to allow "Read Data". I did this process and I was able to create .xml file, however if I chose Application Express to create .sql file or the option to create both files the same error shows.
I have been reading in this forum but didn't find a way to solve it.
Does any body knows how to solve this issue?
Any help is appreciated.
Thanks in advance for your help.Hello,
I can't reproduce your issue.
Have you double-checked that the tables MSysAccessObjects, MSysACEs, MSysObjects, MSysQueries and MSysRelationships are visible and that the Admin user has at least Read Design and Read Data permission on those tables?
If that is the case, and the problem still happens, and you are able to give a copy of your .mdb file to Oracle, then I suggest to open a Service Request with Oracle Support so that the issue can be investigated.
Regards
Wolfgang -
Can you use Object Relational SQL to access XML content ?
Is there a possibility to use the generated object types and collection types to conveniently access the xml data?
Technically there is nothing to prevent you from using the object types generared when an XML Schema is registered to access and manipulate the contents of the instance documents that conform to the Schema. This would be done using the notation x.xmldata.attribute In this case x would be the object table, xmldata is the name of the instance of the SQL object type associated with the table in question.
However we do not encourage or recommend this approach. Currently XML DB provides the application developer with DML / DDL independence. This holds true as long as you use XPATH expressions to express your DML operations. Using XPATH expressions to access the content of an XML document maintains an abstraction between the DML (XPATH) and the underlying Object Relational Storage Structure derived from the information in the corresponding XML Schema. Whereever possible, when you express a query using an XPATH expression, under the covers we attempt to re-write the query into Object Relational SQL, based on the meta data contained in the Schema, as access v
If you use the object notation to access the content of the document you break this abstraction. Your application now needs to be aware of the physical (object relational) storage model being used to manage the instance documents.
One of the key features of XML DB is that it allow a developer to use Schema Annotations to alter the storage model used to manage the instance documents. The most common example of this is using annotations to control the way in which collections are managed. Depending on the annotation in the schema you can store collections as a VARRAY, as a NestedTable or as a separate XMLType table. Dependong on the technique chosed the objects that are generated during the XML Schema registration process will change.
If you use the XPATH expressions to accesss the content of your documents, and you decided to change the annotations in your schema so as to revise the way your documents are stored, XML DB will ensure your code should continue to work unchanged, regardless of which objects are generated during Schema registration. On the other hand, if you use the object notation to access the content of the documents, and then change the annotation you will have to change your code.
I hope this clarifies the situation.. -
I use Filevault now. But still is it safe ? Before it was only a sign in password. Answers appreciated .
Welcome to the Apple Support Communities
What FileVault does in Lion and Mountain Lion is encrypt the whole hard drive, so if you don't type your user password when you start the Mac with FileVault, it's near impossible to access to the data because the hard drive can't be accessed.
In Lion and Mountain Lion, FileVault encrypts all the hard disk, so your files are safer than with FileVault in Mac OS X Snow Leopard. The thief will probably be unable to access to the files -
Need help related to EBS access..
Hi,
We have installed EBS R12.1.1(11g Db).We have completed some of the setups and now have to provide access to the end users for UAT(User Acceptance Testing).But, the problem is we have around 40 users who will be accessing the EBS at any givent point of time, and out of 40 users, aroung 25 users will be accesing EBS through VPN, as our client has offices spread out in diffrent parts of the city and country.Our client Facility wants to know what is the optimal bandwidth they should go in for, so that access through VPN does not become too slow for the end users.Is there any benchmark/statistical document which I can forward to my clients so that they can get a fair idea about the optimal bandwidth??
Thanks and Regards,
RupdiptHi,
Please see this link.
Comparing Bandwidth Requirements between Release 11i and 12
http://blogs.oracle.com/stevenChan/2007/06/comparing_bandwidth_requiremen.html
I believe Oracle support cannot help here even if you log a SR -- See (Note: 423160.1 - What Network Bandwidth Is Recommended for Oracle E-Business Suite 11i?) or details.
Regards,
Hussein -
Weblogic 7.0 Porting related guest user access
Hi Guys,
Steps in my workflow :
Servlet makes a call to Session Bean which has transcations managed by container.
Session bean executes SQL Queries Session Bean invokes methods on Entity Bean
in another Weblogic Instance to get value object.
Session Bean after updating the database as well after interacting with another
Weblogic
Instance returns a Java Object to Servlet.
All the beans are container managed transaction.
Session Bean (Transaction Managed by Container)
Entity Bean (Container Managed Bean)
In weblogic 6.1 SP2 everything works well.
While porting the application to weblogic 7.0 SP1 ,
I get the following errors in Server 1 (Session Bean)
*****************************************************************[2002/04/22 11:14:07:406]
[DEBUG] [com.hns.iag.dbsp.servlets.DSPServlet] Remote exception while deleting
java.rmi.RemoteException: Exception while commiting Tx : 3:efdbedc9111bd8d6; nested
exception is: javax.transaction.SystemException: Timeout during commit processing
Start server side stack trace: java.rmi.RemoteException: Exception while commiting
Tx : 3:efdbedc9111bd8d6; nes ted exception is: javax.transaction.SystemException:
Timeout during commit processing javax.transaction.SystemException: Timeout during
commit processing at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(Se
rverTransactionImpl.java:265) at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTran
sactionImpl.java:208) at weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:2
78) at com.hns.iag.dbsp.ejb.user.DBSPUserManagerBean_ymjd1a_EOImpl.deleteDBS PUser(DBSPUserManagerBean_ymjd1a_EOImpl.java:812)
at com.hns.iag.dbsp.ejb.user.DBSPUserManagerBean_ymjd1a_EOImpl_WLSkel.in voke(Unknown
Source) at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:15
9) at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR ef.java:262)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR ef.java:229)
at com.hns.iag.dbsp.ejb.user.DBSPUserManagerBean_ymjd1a_EOImpl_WLStub.de leteDBSPUser(Unknown
Source) at com.hns.iag.dbsp.servlets.DSPServlet.doDeleteUser(DSPServlet.java:114
9) at com.hns.iag.dbsp.servlets.DSPServlet.service(DSPServlet.java:131) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run (ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm pl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm pl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio n.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic eManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe rvletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm pl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
End server side stack trace
The Error in the another Server 2 (Entity Bean)
<Apr 21, 2002 9:20:26 PM IST> <Error> <JTA> <110200>
<User [guest] is not authorized to invoke startCommit on a transaction branch.>
<Apr 21, 2002 9:20:56 PM IST>
<Error> <JTA> <110200> <User [guest] is not author ized to invoke startCommit
on a transaction branch.>
<Apr 21, 2002 9:20:58 PM IST> <Error> <JTA> <110201> <User [guest] is not author
ized to invoke startRollback on a transaction branch.> <Apr 21, 2002 9:21:07 PM
IST>
<Error> <JTA> <110201> <User [guest] is not author ized to invoke startRollback
on a transaction branch.>
Though the error says startRollback on a transaction branch all the operations
are commited. Only this error is thrown as RemoteException to Server 1.
If I catch the Remote Exception and do nothing.I am getting the desired result.
My Question is why should I be getting a Remote Exception from the other weblogic
instance.
The Remote Exception seems to be a JTA Exception on other weblogic instance.
I am using Oracle Thin Driver for Oracle 8.1.7 with TXDatasource.
Is this an error w.r.t guest user ?
What is the likely fix ?
Thanks, KumarHi Guys,
Steps in my workflow :
Servlet makes a call to Session Bean which has transcations managed by container.
Session bean executes SQL Queries Session Bean invokes methods on Entity Bean
in another Weblogic Instance to get value object.
Session Bean after updating the database as well after interacting with another
Weblogic
Instance returns a Java Object to Servlet.
All the beans are container managed transaction.
Session Bean (Transaction Managed by Container)
Entity Bean (Container Managed Bean)
In weblogic 6.1 SP2 everything works well.
While porting the application to weblogic 7.0 SP1 ,
I get the following errors in Server 1 (Session Bean)
*****************************************************************[2002/04/22 11:14:07:406]
[DEBUG] [com.hns.iag.dbsp.servlets.DSPServlet] Remote exception while deleting
java.rmi.RemoteException: Exception while commiting Tx : 3:efdbedc9111bd8d6; nested
exception is: javax.transaction.SystemException: Timeout during commit processing
Start server side stack trace: java.rmi.RemoteException: Exception while commiting
Tx : 3:efdbedc9111bd8d6; nes ted exception is: javax.transaction.SystemException:
Timeout during commit processing javax.transaction.SystemException: Timeout during
commit processing at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(Se
rverTransactionImpl.java:265) at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTran
sactionImpl.java:208) at weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:2
78) at com.hns.iag.dbsp.ejb.user.DBSPUserManagerBean_ymjd1a_EOImpl.deleteDBS PUser(DBSPUserManagerBean_ymjd1a_EOImpl.java:812)
at com.hns.iag.dbsp.ejb.user.DBSPUserManagerBean_ymjd1a_EOImpl_WLSkel.in voke(Unknown
Source) at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:15
9) at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR ef.java:262)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR ef.java:229)
at com.hns.iag.dbsp.ejb.user.DBSPUserManagerBean_ymjd1a_EOImpl_WLStub.de leteDBSPUser(Unknown
Source) at com.hns.iag.dbsp.servlets.DSPServlet.doDeleteUser(DSPServlet.java:114
9) at com.hns.iag.dbsp.servlets.DSPServlet.service(DSPServlet.java:131) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run (ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm pl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm pl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio n.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic eManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe rvletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm pl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
End server side stack trace
The Error in the another Server 2 (Entity Bean)
<Apr 21, 2002 9:20:26 PM IST> <Error> <JTA> <110200>
<User [guest] is not authorized to invoke startCommit on a transaction branch.>
<Apr 21, 2002 9:20:56 PM IST>
<Error> <JTA> <110200> <User [guest] is not author ized to invoke startCommit
on a transaction branch.>
<Apr 21, 2002 9:20:58 PM IST> <Error> <JTA> <110201> <User [guest] is not author
ized to invoke startRollback on a transaction branch.> <Apr 21, 2002 9:21:07 PM
IST>
<Error> <JTA> <110201> <User [guest] is not author ized to invoke startRollback
on a transaction branch.>
Though the error says startRollback on a transaction branch all the operations
are commited. Only this error is thrown as RemoteException to Server 1.
If I catch the Remote Exception and do nothing.I am getting the desired result.
My Question is why should I be getting a Remote Exception from the other weblogic
instance.
The Remote Exception seems to be a JTA Exception on other weblogic instance.
I am using Oracle Thin Driver for Oracle 8.1.7 with TXDatasource.
Is this an error w.r.t guest user ?
What is the likely fix ?
Thanks, Kumar -
I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528) 0x5C08 Excel Services
Excel Calculation Services 2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context. at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528) 0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528) 0x5C08 Excel Services
Excel Web Access 6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context. at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local() --- End of inner exception stack trace --- at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings() at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList() at Microsoft.Office...
2.the event in event viewer is:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2014/10/10 9:49:43
Event ID: 4625
Task Category: Logon
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ***.net
Description:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: ***
Account Domain: ***
Failure Information:
Failure Reason: An Error occured during Logon.
Status: 0xc000006d
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port: 63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
<EventID>4625</EventID>
<Version>0</Version>
<Level>0</Level>
<Task>12544</Task>
<Opcode>0</Opcode>
<Keywords>0x8010000000000000</Keywords>
<TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
<EventRecordID>37602685</EventRecordID>
<Correlation />
<Execution ProcessID="532" ThreadID="26096" />
<Channel>Security</Channel>
<Computer>***.net</Computer>
<Security />
</System>
<EventData>
<Data Name="SubjectUserSid">S-1-0-0</Data>
<Data Name="SubjectUserName">-</Data>
<Data Name="SubjectDomainName">-</Data>
<Data Name="SubjectLogonId">0x0</Data>
<Data Name="TargetUserSid">S-1-0-0</Data>
<Data Name="TargetUserName">***</Data>
<Data Name="TargetDomainName">***</Data>
<Data Name="Status">0xc000006d</Data>
<Data Name="FailureReason">%%2304</Data>
<Data Name="SubStatus">0x0</Data>
<Data Name="LogonType">3</Data>
<Data Name="LogonProcessName">
</Data>
<Data Name="AuthenticationPackageName">NTLM</Data>
<Data Name="WorkstationName">***</Data>
<Data Name="TransmittedServices">-</Data>
<Data Name="LmPackageName">-</Data>
<Data Name="KeyLength">0</Data>
<Data Name="ProcessId">0x0</Data>
<Data Name="ProcessName">-</Data>
<Data Name="IpAddress">***</Data>
<Data Name="IpPort">63664</Data>
</EventData>
</Event>Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support -
Access to Outlook Anywhere does not work
Good evening,
I recently installed an Exchange Server 2013 CAS / MB.
Until now, the server presented a few errors (mainly in the
event log) that does not seem to significantly influence functionality.
This week I published the server on the Internet and verified various malfunctions
related to the access from outside.
In particular from outside:
1 - OWA does not work with Windows integrated authentication, it works with the Forms based authentication;
2 - Outlook Anywhere does not work from internet.
I've done a lot of research and testing without success.
With regard to the first issue (which is not a priority but can relate to second one)
add that in Firefox I get a first authentication request. If
I enter credentials it ask again for identical authentication (repeatly), if I cancel it shows a second one that instead allows me access (are slightly different).
I assume that the first is the integrated Windows application and the second is basic authentication.
Internet Explorer shows me only the first authentication request and if I cancel shows blank page.
The problem is
priority 2:
Outlook connects without problems on LAN network, the Internet
seems to download the correct information
(autodiscover), but then does not connect
to the server (connection to Microsoft Exchange is unavailable).
If you manually edit the settings,
auto-configuration server returns as
a [email protected]. If I change
manually the server (and proxy settings
http), the result does not change.
- Setting information -
The server is installed
in the LAN network and is exposed on the Internet through
a firewall (Pat on port 443, et al. not 80)
on a public address.
The public and private DNS have been configured with a
host record (A) and two
CNAME (webmail and autodiscover).
The internal Outlook clients connect
with autodiscover and HTTPS /
NTLM / SSL (Outlook connectivity
status).
IMAP, SMTP, POP, ActiveSync function.
Exchange remote connectivity analizer retrieves Autodiscover information but doesn't pass test for RPC/HTTP access (it discard accesson
port 443 and try port 80, SPF isn't configured).
The navigation to the url
https://proxyexternalURL/rpc/rpcproxy.dll has the same behaviour like problem 1.
Test-OutlookConnectivity returns unmanaged error ('WARNING: An unexpected error has occurred and a Watson dump is being generated: Failed to find the probe result for invoke now request id -- and probe workdefinition id --').
Errors in eventviewer: 5011 - WAS (one time), 139 - MSExchange OWA (some not ripetitive), 3028 - MSExchangeApplicationLogic (every 6 hours), 106 - MSExchange common (many during working hour), 65535 - application (some at nighttime 00.00 - 03.00 a.m.), 1006
- MSExchangeDiagnostic (every 30 min), 6002 - MSExchange Mid-Tier Storage (about every 5 minutes), 5 - MSExcahnge Workload Management (one time).
Ask for further information.
- Cmdlet and Autodiscover output -
Get-OutlookAnywhere | fl name,*auth*,*ssl*,*host*
Name : Rpc (Default Web site)
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}
SSLOffloading : True
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : True
ExternalHostname : webmail.name_domain.test
InternalHostname : webmail.name_domain.test
Get-OutlookProvider | ft -autosize
Name Server CertPrincipalName TTL
EXCH msstd:webmail.name_domain.test 1
EXPR msstd:webmail.name_domain.test 1
WEB
1
Get-AutodiscoverVirtualDirectory | fl name,*auth*,*url*
Name : Autodiscover (Default Web site)
InternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
ExternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
LiveIdNegotiateAuthentication : False
WSSecu.testyAuthentication : True
LiveIdBasicAuthentication : False
BasicAuthentication : True
DigestAuthentication : False
WindowsAuthentication : False
OAuthAuthentication : True
AdfsAuthentication : False
InternalUrl :
ExternalUrl :
Get-MapiVirtualDirectory | fl name,*auth*,*url*
Name : mapi (Default Web site)
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}
InternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
ExternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
InternalUrl : https://webmail.name_domain.test/mapi
ExternalUrl : https://webmail.name_domain.test/mapi
Autodiscover.xml
<?xml version="1.0" encoding="utf-8"?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
<User>
<DisplayName>user</DisplayName>
<LegacyDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=e4c0c18c8f214afbb5152bb08823179d-user</LegacyDN>
<AutoDiscoverSMTPAddress>user@name_domain.test</AutoDiscoverSMTPAddress>
<DeploymentId>d60c71c9-3740-404c-a38c-aa24e6105432</DeploymentId>
</User>
<Account>
<AccountType>email</AccountType>
<Action>settings</Action>
<MicrosoftOnline>False</MicrosoftOnline>
<Protocol>
<Type>EXCH</Type>
<Server>72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</Server>
<ServerDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</ServerDN>
<ServerVersion>73C082C8</ServerVersion>
<MdbDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test/cn=Microsoft Private MDB</MdbDN>
<PublicFolderServer>webmail.name_domain.test</PublicFolderServer>
<AD>DC2.name_domain.test</AD>
<ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
<EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
<EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
<EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
<EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
<OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
<UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
<ServerExclusiveConnect>off</ServerExclusiveConnect>
<CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
</Protocol>
<Protocol>
<Type>EXPR</Type>
<Server>webmail.name_domain.test</Server>
<SSL>On</SSL>
<AuthPackage>Basic</AuthPackage>
<ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
<EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
<EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
<EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
<EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
<OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
<UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
<ServerExclusiveConnect>on</ServerExclusiveConnect>
<CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
<EwsPartnerUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsPartnerUrl>
<GroupingInformation>LAN</GroupingInformation>
</Protocol>
<Protocol>
<Type>WEB</Type>
<Internal>
<OWAUrl AuthenticationMethod="Basic, Fba">https://webmail.name_domain.test/</OWAUrl>
<Protocol>
<Type>EXCH</Type>
<ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
</Protocol>
</Internal>
<External>
<OWAUrl AuthenticationMethod="Basic">https://webmail.name_domain.test/</OWAUrl>
<Protocol>
<Type>EXPR</Type>
<ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
</Protocol>
</External>
</Protocol>
<Protocol>
<Type>EXHTTP</Type>
<Server>webmail.name_domain.test</Server>
<SSL>On</SSL>
<AuthPackage>Ntlm</AuthPackage>
<ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
<EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
<EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
<EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
<EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
<OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
<UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
<ServerExclusiveConnect>On</ServerExclusiveConnect>
<CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
</Protocol>
<Protocol>
<Type>EXHTTP</Type>
<Server>webmail.name_domain.test</Server>
<SSL>On</SSL>
<AuthPackage>Basic</AuthPackage>
<ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
<EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
<EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
<EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
<EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
<OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
<UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
<ServerExclusiveConnect>On</ServerExclusiveConnect>
<CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
</Protocol>
</Account>
</Response>
</Autodiscover>
Get-OwaVirtualDirectory | fl name,*auth*,*url*
Name : owa (Default Web Site)
ClientAuthCleanupLevel : High
InternalAuthenticationMethods : {Basic, Fba}
BasicAuthentication : True
WindowsAuthentication : False
DigestAuthentication : False
FormsAuthentication : True
LiveIdAuthentication : False
AdfsAuthentication : False
OAuthAuthentication : False
ExternalAuthenticationMethods : {Basic}
Url : {}
SetPhotoURL :
Exchange2003Url :
FailbackUrl :
InternalUrl : https://webmail.name_domain.test/
ExternalUrl : https://webmail.name_domain.test/Follow the results of the test
Outlook Anywhere (RPC over HTTP).
Has been used an account for which
outlook anywhere works. The account
for which the outlook anywhere does not work is
an administrative account and therefore
can not be used in the test.
Autodiscovery returns the
same result for both mailbox.
I'm testing RPC/HTTP connectivity.
Testing RPC over HTTP has not been exceeded.
Test steps
Microsoft connectivity Analyzer is attempting to test the Autodiscover service for user_test@domain_name.test.
Test the Autodiscover service has not been exceeded.
Test steps
I'm trying to contact the Autodiscover service with each method available.
I was not able to contact the Autodiscover service with no method.
Test steps
I'm trying to test the possible URL for the Autodiscover service https://domain_name.test/AutoDiscover/AutoDiscover.xml
The test of this potential URL for the Autodiscover service has not been exceeded.
Test steps
I'm trying to resolve the host name domain_name. DNS test.
I was able to resolve the host name.
IP addresses are returned: xxx.yyy.zzz.www
I'm testing the TCP port 443 on the host domain_name. tests to check that is open and listening.
The door has been opened properly.
I'm testing the validity of your SSL certificate.
The SSL certificate has not exceeded one or more validation controls.
Test steps
Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server domain_name. test on port 443.
Microsoft connectivity Analyzer got the remote SSL certificate.
Remote certificate subject: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test issuer: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name,
L = city, S = state, C = test.
I am validating the certificate name.
I could not validate the certificate name.
More info about this issue and how to resove it
The host name domain_name. testing does not match any name found on the certificate and server = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test.
I'm trying to test the possible URL for the Autodiscover service https://autodiscover.domain_name.test/AutoDiscover/AutoDiscover.xml
The test of this potential URL for the Autodiscover service has not been exceeded.
Test steps
I'm trying to resolve the host name autodiscover. domain_name. DNS test.
I was able to resolve the host name.
IP addresses are returned: xxx.yyy.zzz.kkk
I'm testing the TCP port 443 on the host autodiscover. domain_name. tests to check that is open and listening.
The door has been opened properly.
I'm testing the validity of your SSL certificate.
The SSL certificate has not exceeded one or more validation controls.
Test steps
Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server autodiscover. domain_name. test on port 443.
Microsoft connectivity Analyzer got the remote SSL certificate.
Other details
Remote certificate subject: CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test issuer: CN = domain_name-DC1-CA, DC = domain_name, DC = test.
I am validating the certificate name.
I validated the certificate name.
Other details
I found the host name autodiscover. domain_name. test in the voice of the alternative name of the certificate object.
Elapsed time: 1 ms.
I am validating the reliability of certificates.
I was not able to validate the reliability of the certificate.
Test steps
Microsoft connectivity Analyzer is attempting to generate certificate chains to a certificate CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test.
I failed to build a certificate chain for the certificate.
Other details
Failed to generate the certificate chain.
May be missing the required intermediate certificates.
I'm trying to contact the Autodiscover service using the HTTP redirect method.
I was not able to contact the Autodiscover service using the HTTP redirect method.
Test steps
I'm trying to resolve the host name autodiscover. domain_name. DNS test.
I was able to resolve the host name.
IP addresses are returned: xxx.yyy.zzz.kkk
I'm testing the TCP port 80 on the host autodiscover. domain_name. tests to check that is open and listening.
The specified port is blocked, is not listening or doesn't produce the expected response.
More info about this issue and how to resove it
I encountered a network error while communicating with the remote host.
I'm trying to
find the
SRV DNS record _audiscover._tcp.domain_name.test.
I failed to find
the SRV record of the
Autodiscover service
in DNS.
Some clarifications:
1 - xxx.yyy.zzz.www and xxx.yyy.zzz.kkk
are two static public addresses
of which only the latter exposes Exchange services;
2 - The certificate
*. Domain_name.test is not related
to Exchange services;
3 -I imported the certificate
of the issuing CA on the standalone test PC to validate the certificate.
3- The port 80 is not open and are not published SRV records.
Best regards. -
Server does not support setting more than 5 shared access policy identifiers on a single container
Hi,
I upload a video file to a new Asset. I then attempt to create a streaming URL by creating an Access Policy and then a Locator, which I use to generate the URL used for streaming.This works great. Until the 6th time you execute
that code against the same Asset. Then you receive this error:
"Server does not support setting more than 5 shared access policy identifiers on a single container."
So, that's fine. I don't need to create a new AccessPolicy everytime, I can reuse the one I've created previously, build a Locator using that same policy. However, even then, I get the error about 5 shared access policies on a single container.
Is this the Lmitation of media service? or am I missing something?
Following is the code I used for this:
if (AssetId != "")
inputAsset = (from a in _context.Assets
where a.Id == AssetId
select a).FirstOrDefault();
policy= (from a in _context.AccessPolicies where a.Name==inputAsset.Name select a).FirstOrDefault();
var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
assetFile.Upload(singleFilePath);
locator.Delete();
MediaElement media = new MediaElement();
media.AssetId = inputAsset.Id;
media.Title = Path.GetFileName(singleFilePath);
var result = Save(media, singleFilePath);
return inputAsset;
else
inputAsset = _context.Assets.Create(User.Identity.Name, AssetCreationOptions.None);
policy = _context.AccessPolicies.Create(
inputAsset.Name,
TimeSpan.FromDays(30),
AccessPermissions.Write | AccessPermissions.List
| AccessPermissions.Read | AccessPermissions.Delete);
var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
assetFile.Upload(singleFilePath);
locator.Delete();
policy.Delete();
MediaElement media = new MediaElement();
media.AssetId = inputAsset.Id;
media.Title = Path.GetFileName(singleFilePath);
var result = Save(media, singleFilePath);
return inputAsset;Hi,
I found some information related to
Stored Access Policy , Shared Access Signatures please check if it helps.
Regards,
Shirisha Paderu. -
Parental Controls - Internet Access Stopped!
My wife has a white MacBook running Leopard 10.5.8. It has worked fine for two years. Nothing was changed. She could not change anythign due to being logged into a managed account.
It could always access the internet over our home (or any available) WiFi perfectly. All of a sudden, yesterday afternoon, her managed account with "Parental Controls" enabled cannot access any internet. Safari mentions that it cannot access the server. When checking the network setting all seems fine, it can access the WiFi router.
The administrator account can access the internet over WiFi just fine.
I created another account called Test. In standard mode it can access the internet over WiFi just fine, but when i turn on "Parental Controls" Safari, or any other internet related program cannot access the internet. This includes the software update in the Finder.
What's going on? i have found similar issues on the Apple Support Communities going back unanswered to 2007!Beach Dude,
I have the same problem, and have had on virtually every operating system since Parental Controls was introduced.
I have multiple kids with individual accounts. THe perplexing thing is that if I enable parental controls on my daughter's account, it works fine. I can set time limits, etc... and it works! But if I so much as turn on parental controls in my youngest son's account, every web browser is unable to connect to the internet at all from his account.
BUGGY software. And apple knows it is buggy, but it isn't core system stuff so they ignore the problem. I even tried setting up a new account for him and moving his old files over and resetting permissions. Still the same problem.
I've searched high and low for a solution and found none. I have found a limited number of users with the same complaint...and absolute silence from apple....
There is nothing on these boards that has worked, and I've tried several different solutions. Most responses are the useless kind, "change the setting in parental controls" kind of sophomoric advice from people who just assume what the problem is instead of reading our description of it.
Anyway, I haven't found a good alternate software solution for limiting the time and hours for children's accounts; but I did find an excellent tool for managing internet content access. It is called opendns and it is free and it works! Do a google search for "opennds" if your primary concern is managing access to web content. If you come up with a good solution for fixing parental controls so that it doesn't just cut off web access, please let me know here - or if you find an alternate software solution that allows an administrator to set time limits for standard accounts, I would like to know that too.
Regards -
Add records in table ACCESS from labview by ActiveX
I try to add records in table of database ACCESS by an ActiveX from labview but my programme doesn't work ...
What is the problem ?
I have attached my VI
Thanks in advance
hasna
Attachments:
base1.vi 35 KBOn Thu, 11 Jul 2002 08:13:48 -0700 (PDT), Lab Viewer
wrote:
>I saw your previous posts related to ActiveX/Access. I once had the
>same kind of problems. It's not an easy task (without a toolkit)
>because you have to learn the "interface" provided by Access/DAO in
>order to manage what you are trying to do.
>In my case, the best solution it was to follow the Visual Basic for
>Applications examples included in MS Access. Even though you don't
>know VB, don't be afraid. Important is to figure out from that example
>what methods/properties you need to use, the proper order to call them
>and eventually some parameters. You are dealing with the same
>methods/properties in LabVIEW, the difference is that you have them in
>a graphical format instead of text
.You can find these examples by
>going to MS Access help > Index and type DAO objects and then choose
>one to start with (Database, recordset, field =85).
>
>Hope this helps
The examples on NI's website were originally written using the DAO
model, but the latest one was written using the ADO model.
However, I am unable to find either example LLBs on their website
anymore. Maybe they're trying to push their SQL Toolkit.
Along with the VBA help in MS Access, I *highly* recommend the book
ADO Programming for Dummies. Wonderful book. Helped me understand the
VBA help. :-)
Again, if anyone is intersted in VIs using ActiveX that works. He/she
is welcome to email me.
Linda -
Unable to access Mojikumi settings set by InDesign using jsx DOM
Hello all,
I am using Japanese InDesign version 7.5 on windows 7. I've set paragraph indent through mojikumi settings and trying to acces it through jsx object model. The following is what I did:
I have created a new Mojikumi set based on default LINE_END_ALL_ONE_HALF_EM_ENUM. All I have changed in new set is "Paragraph Mojikumi Indent" from none to 1 char. I want to access this setting from java script using its object model. I've tried the method paragraphObject.mojikumi.overrideMojikumiAkiList which seems to be the related method to access the customized settings. The output of the function I'm getting is a big array:
2,23,false,1,1,1,0,false,3,23,false,1,1,1,0,false,4,23,false,1,1,1,0,false,5,23,false,1,1, 1,0,false,6,23,false,1,1,1,0,false,21,23,false,1,1,1,0,false,7,23,false,1,1,1,0,false,8,23 ,false,1,1,1,0,false,9,23,false,1,1,1,0,false,10,23,false,1,1,1,0,false,11,23,false
,1,1,1,0,false,12,23,false,1,1,1,0,false,24,23,false,1,1,1,0,false,25,23,false,1,1,1,0,fal se,18,23,false,1,1,1,0,false,33,23,false,1,1,1,0,false,28,23,false,1,1,1,0,false,29,23,fal se,1,1,1,0,false,30,23,false,1,1,1,0,false,31,23,false,1,1,1,0,false,32,23,false,1,1,1,0
,false,1,23,false,1,1,1,0,false,26,23,false,1,1,1,0,false,27,23,false,1,1,1,0,false
Of these values, how can I deterministically find the one that corresponds to paragraph mojikumi indent? Also the size of array seems to be changing as we add or change override values for diefferent mojikumi sets. So its definitely not based on array index.
API description says:
overrideMojikumiAkiList
Array of
akiDoesNotFloat:Boolean
compressionPriority:Short Integer
desired:Real
maximum:Real
minimum:Real
Ordered array containing targetMojikumiClass:Short Integer
sideIsAfterTarget:Boolean
sideMojikumiClass:Short Integer
r/w
The mojikumi overrides for aki. Can return: Ordered array containing targetMojikumiClass:Short Integer, sideMojikumiClass:Short Integer, sideIsAfterTarget:Boolean, minimum:Real, desired:Real, maximum:Real, compressionPriority:Short Integer, akiDoesNotFloat:Boolean.
Any pointers to help links or any insights on how to decode the above array deterministically for all mojikumi sets will be of great help to me.
Thanks,
SrikanthHi
here is link when..
I get Diff custom setting and default setting
http://www.milligramme.cc/wp/archives/537
and get applied mojikumi sets in most front document
http://www.milligramme.cc/wp/archives/3368
I hope you will find it helpful
thanks
mg. -
ASR 1002 PPPoE/A Virtual-Access subinterface problem
Hi Guys,
i try to configure a BRAS solution for PPPoE/A termination.
When try to connect a client i receive the following error:
*May 3 00:51:25.043: %LINK-3-UPDOWN: Interface Virtual-Access4, changed state to up
*May 3 00:51:25.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access4, changed state to up
*May 3 00:51:25.093: %FMANRP_ESS-4-FULLVAI: Session creation failed due to Full Virtual-Access Interfaces not being supported. Check that all applied Virtual-Template and RADIUS features support Virtual-Access sub-interfaces. swidb= 0x40A8D2CC, ifnum= 29
*May 3 00:51:25.098: %LINK-3-UPDOWN: Interface Virtual-Access4, changed state to down
The problem is related to Virtual-Access subinterface, usually, on standard IOS, i work on full mode
In the Cisco DOC i found this:
"If the subinterface is not configured, the following error message is displayed when creating a session with one of the RADIUS attributes:
*Mar 13 22:04:03.358: %FMANRP_ESS-4-FULLVAI: Session creation failed due to Full
Virtual-Access Interfaces not being supported. Check that all applied Virtual-Template and
RADIUS features support Virtual-Access sub-interfaces. swidb= 0x7FA35A42F218, ifnum= 30
To enhance the scalability of per-user configurations, in many cases, different Cisco AV-pairs are available to place the subscriber interface in a Virtual Routing and Forwarding (VRF) instance or to apply a policy map to the session. For example, use the ip:vrf-id and ip:ip-unnumbered VSAs to reconfigure a user's VRF. For information about enhancing scalability see, "Enhancing the Scalability of Per-User Configurations" section."
Ok i try to pass in radreply the following attribute :
test Cisco-AVPair += ip:vrf-id=RACC_ULL
test Cisco-AVPair += ip:ip-unnumbered=Loopback 199
Nothing don't work same error ....
If remove a "ip-unnumbered" attribute the Virtual-Access coming up but no ip address is assigned
Any ideas ?
Many thx
show ver
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.1(3)S2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Mon 12-Dec-11 15:15 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2011 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
ASR-01-BS uptime is 6 days, 18 hours, 6 minutes
Uptime for this control processor is 6 days, 18 hours, 8 minutes
System returned to ROM by reload at 22:08:16 UTC Sat Mar 31 2012
System image file is "bootflash:asr1000rp1-adventerprisek9.03.04.02.S.151-3.S2.bin"
Last reload reason: PowerOn
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco ASR1002 (2RU) processor with 1700062K/6147K bytes of memory.
4 Gigabit Ethernet interfaces
1 ATM interface
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7757823K bytes of eUSB flash at bootflash:.
Configuration register is 0x2102
show run
aaa new-model
aaa group server radius AAA_RACC_ULL
server-private xx.xx.xx.xx auth-port 1812 acct-port 1813 key xxxxxxx
server-private xx.xx.xx.xx auth-port 1812 acct-port 1813 key xxxxxxx
ip vrf forwarding RACC_ULL
aaa authentication login local_auth local
aaa authentication ppp default group AAA_RACC_ULL
aaa authorization network default group AAA_RACC_ULL
aaa accounting send stop-record authentication failure
aaa accounting update newinfo periodic 60
aaa accounting network default start-stop group AAA_RACC_ULL
aaa accounting connection default start-stop group AAA_RACC_ULL
aaa accounting resource default start-stop group AAA_RACC_ULL
aaa session-id common
aaa policy interface-config allow-subinterface
ip vrf RACC_ULL
description *** VRF Raccolta TEST ***
rd 1:1
vpdn enable
no virtual-template snmp
bba-group pppoe xDSL_PPPoE_ADSL
virtual-template 199
vendor-tag circuit-id service
sessions auto cleanup
interface Loopback199
description *** GW RACCOLTA IP ADSL ***
ip vrf forwarding RACC_ULL
ip address 10.0.0.1 255.255.255.255
interface GigabitEthernet0/0/0
description *** ***
no ip address
no ip proxy-arp
load-interval 30
negotiation auto
interface GigabitEthernet0/0/3.20
description *** DOWNLINK TO DSLAM VLAN ADSL ***
encapsulation dot1Q 20
ip vrf forwarding RACC_ULL
no ip proxy-arp
pppoe enable group xDSL_PPPoE_ADSL
interface Virtual-Template199
description *** PPPoE AUTH ADSL ***
mtu 1488
ip unnumbered Loopback199
peer default ip address pool DYNAMIC_ADSL
ppp authentication chap pap callin
ip local pool DYNAMIC_ADSL 192.168.20.2 192.168.20.254
ip forward-protocol nd
no ip http server
no ip http secure-server
ip route vrf RACC_ULL 0.0.0.0 0.0.0.0 192.168.254.1
ip radius source-interface GigabitEthernet0/0/0.999 vrf RACC_ULL
radius-server vsa send accounting
radius-server vsa send authenticationHi Manuel,
thanks for your answer.
Below the other attribute send from radius to ASR
Framed-MTU := 1488
MS-Primary-DNS-Server := 62.97.32.21
MS-Secondary-DNS-Server := 62.97.33.21
Framed-Protocol := PPP
Service-Type := Framed-User
Framed-Compression := Van-Jacobsen-TCP-IP
If possible i prefer to work using only virtual-template mode without per-user VRF.
I try con configure VT using ip vrf forwarding RACC_ULL and ip unnumbered ( in the same VRF domain ) without success. -
Accessing realm returns "Forbidden" error
We host other people's Web sites. Each customer has access to their Web folder via AFP. Within their folder, we want to have a password-protected folder that has their Web log files. Coming from WebSTAR, we know about realms, so we set one up via Server Admin. The customer has browse/author permission, and our group has the same. Problem is, I keep getting a Forbidden error when I try to access the protected folder. The way Apple documents realms, it sounds like they're intertwined with WebDAV, so I enabled WebDAV, but still no go. The following is in the site's conf file:
<Directory "path-to-protected-folder">
<Limit GET HEAD OPTIONS CONNECT POST PROPFIND PUT DELETE PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
Require user customer-user-name
Require group our-group-name
</Limit>
AuthName "realm-name"
AuthType Basic
</Directory>
It looks good to me, as far as I understand it. Can anyone point me in the right direction to getting past "Forbidden"? Thanks.
Mac Mini Mac OS X (10.4.4)Try Camelot's suggestion, and if that doesn't do it,
take a look at error_log (/var/log/httpd/error_log)
and see what it says, and post the relevant
messages.
The appleauthmodule is active. The error log had one line related to my access attempt:
[Mon Feb 20 12:30:22 2006] [error] [client 66.241.88.36] "Directory index forbidden by rule: /Library/WebServer/Documents/Sites/chas/stats/"
I seem to remember getting this error while evaluating OS X Server a while back, and it was a file or folder permissions problem. In the path name in the error log line above, folders Sites, chas and stats all have read and write permissions for group webadmin (which contains our staff users and user Web), and no permissions for Everyone. The latter is to keep Web customers from being able to access each other's folders. With a browser, accessing Web pages works fine, but trying to access the stats folder gives the immediate Forbidden error. Do you see anything in these permissions that seems suspicious?
Also, in Terminal, run:
apachectl configtest
apachectl reported OK syntax for all config files. Thanks for your help.
Maybe you are looking for
-
Executing a stored procedure using a button within a region
Hello APEX Users: I have the task of creating a link within an apex region to execute a stored procedure from another schema using two arguments. What is the best method of executing a procedure in apex using a link or button? Thanks. Ben
-
All of a sudden my IPhone (3G, I think) "turned off" and won't power back up. I know it's not the battery, but I have it plugged in anyway. Any suggestions?
-
How do i get films onto my ipod touch?
how do i get films onto my ipod touch
-
[solved]Every mirror is giving me different errors (I know I'm online)
I can ping google, and have confirmed that I am online. BTW I am using x86_64 and I just installed it. I am trying to run pacman -Syu but keep getting errors from nethat.com that I am "not logged in" Every other server i have tried says 'core.db.tar.
-
Fw Pen Tool Bugged - Can't Create Points w/ a click
So I don't use Fireworks much, but am trying to start. Am I wrong in thinking that just CLICKING somewhere on the canvas with the Pen Tool should add a point? Because it's not happening for me. The only way it adds a point is if I click and drag - wh