Relating to Creation of Number of Company Codes.

Hi Experts,
My Client is a Trader and he has 5 different Company Codes. Which are as follows.
1) This Company imports Goods and Sales Locally.-It"s a properitoship
2) This Company Exports Goods - Its a Properitoship.
3) This Company is a shop which sells goods- Its a Partnership Firm.
4) This Company is a shop which sells goods- Its a Partnership Firm.
5) This Company has Group of Shops which sells goods- Its a Partnership Firm.
In the 5th Company Case each shop can be treated as Cost Centre and Profit Centre so that the Reports can be get individually Profit-Centre wise and Consolidated.
Any Other Alternative Solution Please advice.
The Customer from the Third Company can even buy from Fourth or Fifth Company also, and makes the payment from whichever company he purchases. The Customer will be alloted points on all Company purchases irrespectively from which can be reedemed.
Whether the Third, Fourth and Fifth Company can be treated as Single Company Code and each shops can be treated as Profit Centres then How about the Capital to be treated because each firm will have different Capital Amount and Assets and Liabilities.
Any other Alternative solution please advice.
Best Regards
Javeed Ahamed.M

hi,
   I had clearly explained the client requirement in the thread that as per the legal requirement the five company codes have to be seperately filed . Each partnership firms should be filed seperately because the partners are different. If combine the company codes 3,4 and 5 as a single company code and maintain the company codes as profit centers then i can get the report for each profit center. How will the capital , Liabilities and assets be maintained in the profit centers because each firm will have  different capital. The accounts will be combined for the three companies whether it is correct as per legal requirement.
If i maintain different company code for each company code then i will have to maintain the customer from company code 3 should be present in 4 and 5 and vice versa. The customer will make the payment from which company code he purchases. But the points on purchase will be maintained and after reaching certain point he can reedeem the consoildate point  from any company if this is the scneario pls advise me how the company code structure to be maintained.

Similar Messages

  • FROM WHICH TABLE I CAN FIND  GL ACCOUNT NUMBER AND COMPANY CODE OF A PARTI

    FROM WHICH TABLE I CAN FIND  GL ACCOUNT NUMBER AND COMPANY CODE OF A PARTICULAR CUSTOMER?..I AM TRYING TO POST AN IDOC ..SO DATA HAS TO BE PROPER.JUST TELL THE SOLUTION

    Hi rendeep,
    1. LFB1
       this is the required table.
    2. field is AKONT
    3. The account number can be different
       for different companies.,
       hence it depnds upon combination of
       LIFNR
       BUKRS
    regards,
    amit m.

  • Is Personnel Number cross company code?

    Hi,
    Have a very fundermental question. Is Personnel number cross company codes? For example, if there are 2 company codes (A and B) in one SAP box and there is an employee in company code A who has the personnel number 900001. Can another employee in company code B has the same peronnel number 900001?
    Thanks,
    Ting

    Hi,
    It is not. You may not have two persons with same Personnel number, no matter if they are in differents Company Codes. There is just one Personnel number and it must be assigned to only one employee.
    Regards,
    Edoardo

  • BP Number for Company Codes

    Hi experts
    i'd like to know how is possible to find BP Number for Company Code. I know the table hrp1001 but into this table i cannot insert the Company Name, and i need to do that.
    Is there a FM?
    I can see BP number for company code into PPOMA_BBP (company name + company code + bp number) but i'd like to know if there are other ways
    regards
    andrea
    Edited by: andrea brescia on Dec 13, 2010 1:28 PM

    Hi. Tables HRT5500 and HRP5500 hold the company code to org unit link.
    HRP1000 should then give you the name of the org unit.
    Regards,
    Dave.

  • Set up Trip Number by Company Code, not Personnel Area

    Hi Gurus,
    I'm implementing Travel Management Module and I am totally new.
    There are more than 400 Personnel Areas in the system so I'm just wondering whether it is possible to set up trip number rage by Company Code rather than Personnel Areas.
    Anyone encounter this, and how did you get around?
    I've heard that user exit MP56TFEX can be used, but how? - (Please note that I'm totally new to user-exit)
    Thank you in advance
    Cheers
    David

    Hi
    Go through this link if you are new TV,hope you will get a idea.
    http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
    J09: Travel Management
    cya
    udayakumar

  • Creation of 2 new company codes in continuation with existing compny code.

    Hi
    Our company has got 2 locations but we are using only one company code for both the locations from the last 4 years.
    Now due to expansion of business we have extended our business to one more location. So.now are planning to use 3 company codes.
    Now I want to know the following things:-
    1. What are the things that are to be done before creating these two additional company codes?
    2. What will be the impact of  these new company codes on the existing company codes?
    3. How the present reports can be used for the new company codes?
    4. How the GL balances will be uploaded for the new compny codes?
    5. How the master data will be created for the new company codes?
    6. What will be the impact of the new company codes on other modules like MM, SD and HR which are already in use?
    Please guide me on the above issue co months of experience.
    considering the fact that I am a fresher in SAP FI and I have
    only 8 months of experience.
    Regards
    Vikram sairam

    Hi Vikcy,
    Company Code is legal Entity and core component in FI.
    Now u r planning create new company codes, just check below:
    01. Chart of Accounts:
         - You may use existing chart of account for new com. code
    02. Controlling Area:
          -  Check the feasibility of cross company code controlling or not. If you maintain one:one relation in existing controlling area, u need to create new one.
    03. SD:  Core component is Sale Organization.  U need to assign them to ur Company Codes. So check accordingly.
    03. MM/ PP:  Plants and Purchasing Organization need to assign to Company Codes.
    Hope it will give you idea on a whole to plan, how u need plan to go ahead.
    Regards,
    Venkat

  • F110-Executing the Payment program for a number of company codes

    We are executing the payment program (transaction F110) for a number of different company codes. On the PARAMETERS tab, we have to type in the company codes every time we do a payment run.  Is there some way to store the parameters tab in a variant so that we can just go get the variant each day instead of typing in the company codes??

    Hi Bonnie,
    in Parameters tab, on the top u have a button (copy parameters (F9)) press that key and give your previous Identification/date, then it will automatically, copies the Company code, Payment Method, Next run date, and Customer and vendors. just change the next rundate. and save
    form next time onwords when u select copy parameters the, it will automatically praposes previously used identifier. that means, pressing F9 then enter will finish ur work.
    Satish
    Assign points if useful.

  • Document number in company code and fiscal year has already been

    Hello,
    While doing a PGI of a delivery in VL02N transaction, I am receiving a dump with the above message in the subject.
    Short text of error message:
    Document number 6200 4900000020 2010 was already assigned
    Long text of error message:
    Diagnosis
         Document number 4900000020 in company code 6200 and fiscal year
         2010 has already been assigned.
    System Response
         Termination of processing.
    Procedure
         Check document number range 49 in company code 6200 and fiscal year
         2010 and correct the number range status if necessary.
    I am not sure of the way the number range clearing in SM56. I need to know the object and subobject for the delivery number for the same.
    Does anybody knows about it ?

    What would be the object and subobject for a delivery number entered in VL02N transaction ?
    There are many objects present in VL02N transaction but I am not able to figure out the real one which is needed.
    Please help me with the same.

  • Customer / Vendor number range company Code

    Hi All,
    I have Created two Account Groups each for customer and vendor masters.
    Domestic and International. We have 5 Comapany Codes. I want to Use the same Account Groups in all the company Code.
    If i Create a vendor for domestic in company Code 1, It creates a Vendor with number 1001.
    next I create a vendor for domestic in comapny Code 2, system assing 1002 as vendor number. but i want to use the start with number 1001 for company code 2 and also for company Codes.
    Is it possible to acheive this with having only two account groups and assigning number based on company code.
    Regards
    Karthik

    Dear Karthik,
    Create customer and vendor account group company wise.
    For eg Raw material vendor - xxx1 co code, Raw material vendor - xxx2 co code
    This exercise will increase the no of vendor and customer groups. Just check the feasibilty of managing the same.
    Regards,
    Kiran

  • GR Number range company code wise

    Hi,
    Can we do the enhancement/ user Exit / Badi for yearly GR Number range with repect to company code wise ?
    If yes then please provide the details how we can move further.
    Regards
    Rahul

    Hello,
    Company code specific number range for Material documents not possible because, The number assignment for material documents and physical inventory documents depends on the transaction/event type which is also allocated to each transaction in Inventory Management. The transaction/event types are divided into groups of number ranges. A number range interval has to be defined for each group.
    You cannot change the transaction/event types. However, you can change
    the number range intervals or you can allocate transaction/event types to
    new groups.
    Inshort, All company code will be using the same transaction event key so it will not be possible to have different number range for material docuement based on company code.
    Regards
    Mahesh Naik
    Edit by: Mahesh Naik 19.01.2011 2.08PM

  • Creation of currency for company code

    Dear Experts ,
                                    Kindly let me know the steps of how to create currency & make it available to assign it to company code.
    Also Please let me know what needs to created first . Company code or controlling are ?
    Regards
    Keerthan Kumar

    Hi Keerthan,
    Please google before post a query on forums. Its a very basic question andhave many threads and SAP notes on this.
    Did you ever try creating company code? Because, currency is already predefined by SAP and can be selected directly while creating com. code.
    Also, creating of company code and cont, area depends upon the business requirement. Create Com code under the path:
    Enterprise structure >Define > Financial Accounting >Edit, Copy, Delete, Check Com code.
    Also, Con Area path is: Enterprise structure >Define > Controlling Area
    BR, Srinivas Salpala

  • What table I could find the Tax Identification Number for Company Code...

    Hi experts,
    I'm debugging a program, the problem is it displays the wrong TIN #. I looked at T001z which I thought I could use but it ain't working. I need to get the TIN # for Company Code and for Customer.
    Points for helpful  ideas... Thanks!

    Hi Maui,
    KNB1 contains the following key fields:
    KUNNR - Customer code
    BUKRS - Company Code
    So, you will be able to get the information from a Customer in a specific Company Code.
    I hope it helps you.
    Regards,
    Daniel.

  • Remittance challan creation problem in Cross company code scenario.

    I made to Advance  payment to Cross comany code while posting time we deduct the TDS amount. at the time remiottance challan creation  i got bellow error.please help to me
    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.
    Edited by: TEEGALA SATISH on Jun 15, 2010 5:43 PM

    Hi ...Actually i am getting same problem in challan creation.. Did you get any solution? ...

  • Steps Invloved in Company Code Creation

    I need to create a new company code in the existing landscape of SAP. Please tell me all the steps involved while creation of a new company code in the existing landscape . I mean I need to know all the high level steps involved. e.g.
    create new company code
    Identify the Z tables where this new company code will impact
    Identify KDS for new company for which we are creating this new company code
    Design Workflow
    The same way I need a detailed activity list for the above project ( i.e. Creation of new company code in the existing SAP landscape )
    Moderator message: not related to ABAP development, also SDN is not your free consulting service, please investigate yourself.
    locked by: Thomas Zloch on Sep 2, 2010 3:18 PM

    Edit, Copy, Delete, Check Company Code(T001)
    Company is created by FI Consultant.
    The company code is an organizational unit used in accounting. It is used to structure the business organization from a financial accounting perspective.
    IMG -> Enterprise Structure -> Definition -> Financial Accounting -> Define, copy, delete, check Company Code
    Regards,
    Jaiprakash.P.T

  • How to find out the company code given the customer number

    I am new to SAP please help me out? How do you find out the answer.

    Hi,
    Goto T.Code SE11/Se16/SE16n.
    Key in the table name as KNB1.
    Enter your customer number.
    Execute.
    You will get your company code here.
    Another way is Goto XD02/XD03.
    Enter your customer number.On company code press F4.Enter the customer number and press Enter.A list of company code in which your customer presents will appear.
    Regards,
    Krishna.

Maybe you are looking for

  • .Mov shows only black screen

    Hey Guys and Gals, Installed Mavericks yesterday and so far very happy. I am a freelance cinematographer/editor and prior to the upgrade I had some footage from a client that was in .MOV format, codec I can't remember but now the system doesn't play

  • Logitech F310 Gamepad only works with Display Manager [SOLVED]

    So I bought a couple Logitech F310 gamepads, for, well, gaming, and I had a hell of a time trying to get my games to respond to them. I run XMonad, and boot it directly via xinit. On a whim, I tried activating gdm and logging into a gnome session, an

  • Adding Network Manager tray for connecting Wireless Network (solved)

    I just installed GDM, gnome, gnome-extra packages but I do not see the network applet in the top right corner. I also installed 'network-manager-applet' but I still do not see it. Currently I have been using wifi-menu everytime and it works fine that

  • Unable to create multiple transport target groups in SLD

    We have multiple R/3 QA systems but just 1 XI QA system and we need to test interfaces with all R/3 QA client at the same time. My XI development team has asked to explore whether its possible to create multiple target systems. Currenlty R3_dev has R

  • How to Erase Safari Traces Completely?

    Hello. As the title says, I wish to erase all Safari traces(history, cookies etc.)completely so that no-one can recover it. I have got a good file shredder, and just in case I will do a 7-pass overwrite on free space. But I'm not sure what files or i