Relationship import | Import manager

Hi ,
I am trying to import relationships through import manager in the material repository . What I do is , there are some existing relationships that I created in the data manager . I export them first [ data manager > relationships > export to a file ] to a file and then make changes to the existing file . I use the same file to import relationships but this time with the import manager . I have the following column names in my ".TXT" file ...
1) material numbe <name of the relationship defined in the console>
2) material number <>
3) quantity
I can successfully map the fields and then when I choose the import action it gives me the following error ...
Import failed. Field not found.
Import action: NoneSource record no: 8
there is no record in my file actually at number 8 . I removed the last "Enter" from the file and then imported it but with same results . I exported the existing relationships to an excel file and then tried to import it through the import manager but with the same result .
To verify if there is a problem with the file I use the same file to import the relationships through data manager [relationships > import from file > name of the relationship defined in the console ] and I am able to successfully import it .
What do you guys think is the problem ??
Regards
Deepak Singh

Hi Deepak,
I had performed the following steps and it worked perfectly fine.
Just go through them once and check that you have did the same.
1. Export Relationship using Data Manager -> Relationships -> Export to File.[There is only Display Field i.e. Material]
2. Imported the same text file with Type="Delimited Text" and Delimiter="\t"
3. Select the Relationship table from the Destination drop down list.
4. Map the Parent Material with the Material[Parent] and Child with Material[Child].Also Quantity with the qualifier Quantity.
5. Execute the import.
Note : Please dont make any changes to the Text file and try importing.
Regards,
Jitesh Talreja
Edited by: Jitesh Talreja on Apr 10, 2008 7:25 AM

Similar Messages

Import and Management of Video Files by Date Still Broken

It really is very disappointing that after 3 versions, and 110 bug fixes, basic things like importing or managing a video file by date is still completely broken.
Even more troubling, is that for someone who uses LR3 this is a very obvious problem, and should be very easy to fix.
When you import a file on a wide range of cameras the date that is used for the video file as far as LR3 is concerned is the date you are importing it, not the date it was taken. This makes any management of the file, especially when managed next to pictures, very difficult.
The problem, as far as I can tell, is that in Windows, a file has both a 'Date Created' and a 'Date Modified'. 'Date Created' is whenever the file was created on the PC. If you bought a new computer and transferred a bunch of files over on 30/12/2010, all of your files will have a 'Date Created' that is 30/12/2010 regardless of when the photos or videos were taken. Or if you take a video on September 1st and import it onto your computer September 15th, it will have a 'Date Created' of September 15th.
'Date Modified' however lists the date that the file was last changed. For video files, that most likely was the date the video was shot.
Every program I have ever used for video files has always organized them by Date Modified (when organizing them by date). For example, its the default in Windows 7 Explorer when showing video files, all the video files listed by the date you have taken them. Date Created really doesnt have any useful information.
Its inexplicable to me why LR3 uses Date Created instead of Date Modified. It is a glaring error, that should be easily fixed. Microsoft can manage to do it right, as a byproduct in its OS, Im not sure why an imaging company in a $400 piece of specialist software cannot.
And just in case this is overlooked as a minor problem, it certainly is not. It happens to the following cameras:
D90 (first camera to shoot video)
D3s (thought by many to be the best low light camera)
D7000 (likely to be Nikon's most important DSLR)
D3100 (likely to be Nikon's most purchased DSLR)
Canon S95 (one of 2 most popular P+S for DSLR owners)
Fuji 31fd (Ill never forget you!)
And those are just the cameras I have on my desk, Im sure it happens to many others.
Also, when importing these files by date, LR3 will import them into a folder 1 date later then the date that LR3 is using for the file. So, just to be clear, you could take a video on May 1st, import it into LR3 on May 2nd and LR3 would say it was taken May 2nd, and it would be placed in the folder for May 3rd.
Im really not sure why something so basic has not been addressed in so long, and it makes any sort of managment of video files by date in LR3 useless.
Very disappointing.

I agree that the wrong file system date is being used. But I scanned all my Lightroom files (manually) tagged with 'video'. When the file contains suitable metadata with a capture time that is used. When that's missing, the (wrong) file system date is used.
Interestingly I even found one camera where the dates were originally right (in 2009), then disappeared for a while (probably due to a firmware upgrade!) and then came back again. Summary of what I found:
Very old (Philips) webcam / format AVI / no metadata visible / wrong date
Canon Powershot A80 / format AVI / metadata visible / right date
Nokia N73 cellphone / format MP4 / no metadata / wrong date
Canon EOS 5D Mark II around 2009 / format MOV / metadata visible / right date
Canon EOS 5D Mark II around 2010 / format MOV / no metadata / wrong date
Canon EOS 5D Mark II around 2011 / format MOV / metadata visible / right date
So my conclusion is that the camera makers are making a bit of a mess when they introduced video. Nikon introduced its video a year or so later than Canon. I don't know if "no metadata" means that there is none, or that Adobe just doesn't like the format. But given the pattern of the firmware updates with Canon, it looks like Canon and Adobe ultimately agreed on the format. But in any case Lightroom (I am using 3.4.1) has a bug w.r.t. its fallback scenario of reading file system dates.
In my case, the dates changed when I copied all my data from one disk (old NAS) to a new one (new NAS). It is disconcerting that you get the copying date despite comparison tools declaring the files to be identical (Beyond Compare 3 also keeps an eye on date differences).
Hope this helps, Peter

Document for Import Batch Manager

I am using MDM 5.5 SP6.
Can someone provide me the concepts for MDM Import Batch Manager.
Also provide me the document for MDM Import Batch Manager

Hi Laksmi,
As far as I know, the Import Batch Mechanism has been taken away from MDM SP05 onwards. You can perform the Automatic Importing and Syndication using the MDIS and the MDSS respectively.
You can find the complete process of Automated Import and Syndication in the 2 links mentioned below:
1) Master Data Management Import Server and Master Data Management Syndication Server - Webinar Powerpoint
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8973bcaf-0801-0010-b7a7-f6af6b1df00e
2) MDM Syndication - This gives you the MDSS config required in the .ini file
/people/harrison.holland5/blog/2006/11/27/mdm-syndication
The 1st link will give you step by step info about Automatic Import and Syndication process.
Hope this helps.
Thanks and Regards
Nitin jain

Help importing JEE Management Pack

I'm unable to import JEE Management Pack (JEE Application Performance Monitoring Library) to my SCOM 2012 R2.
When I try to import "Microsoft.JEE.APM.Library.mpb" I get an error:
I need it to monitor my Tomcat Apache instances.

Before your import "Microsoft.JEE.APM.Library.mpb", your should import MicrosoftJEE.Library which you can download from
https://www.microsoft.com/en-us/download/details.aspx?id=29270
Roger

Cant import javax.management

Hi,
i whant to query some monitor/system information and need to connect to the jmx adapter.
If i try to import javax.management.MBeanServer; or anything i need, DS can´t resolve this.
My first step was to set a reference in my application-j2ee-engine.xml and register the jmx libary.
The file look like this
But nothing has changed
Any idea someone?
best regards

Also see my post at http://forum.java.sun.com/thread.jsp?forum=54&thread=182034 "Where do java imports come from?"

Has anyone gotten the error message after statement of error from Adobe: Mismatched begin and rollbackUserAction calls? (Import::import action to. generate page bitmap for CONTACT US)

Help! Full error statement:
Adobe Muse CC has encountered an error and will now exit. Please report the last few actions you took leading up to this error to the Adobe Muse CC team.
Mismatched begin and rollbackUserAction calls? (Import::import action to. generate page bitmap for CONTACT US)

Please send us the .muse file and the MuseLog.txt file from your Documents folder to [email protected] Include a link to this thread for context. If the file is larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (If you use a service, please include your return e-mail address in the body of the message, since not all services include it in the sharing invite they send.) Thanks.

Mac book pro (2008)will not start up,command-v gives (error) Import:Importer start failed for 89(kr:268435459)invalid destination port)

will not start up.
tried Command-v
message reads
(error) Import:Importer start failed for 89 (kr:268435459)invalid destination port)

First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Strange syslog entries in 10.5.1: mds[/PID/]: (Error) Import: importer fail

Hi all: (first post here
I do get really worrying error messages in my syslog after installing Leopard:
01.01.08 19:44:00 mds[35] (Error) Import: importer:0x87b200 Importer start failed for -2 (kr:268435459 (ipc/send) invalid destination port)
01.01.08 19:44:00 com.apple.launchd[1] (0x10d4e0.mdworker[6295]) getpwuid("4294967294") failed
01.01.08 19:44:00 com.apple.launchd[1] (0x10d4e0.mdworker[6295]) Exited with exit code: 1
01.01.08 19:44:00 com.apple.launchd[1] (0x10d4e0.mdworker) Failed to check-in!
This keeps repeating every 5 seconds - and I really have no clue what that huge UID for mdworker means - or how to change and what to change to make this go away...
Any help or insights really appreciated! TIA!
Best,
Frank DG1SBG

If that didn't work, type this command in the Terminal.app (/Applications/Utilities/), hit the return key, enter your admin password, and hit the return key:
*sudo mdutil -aE*
That will erase each local metadata store for all mounted volumes and rebuild them.
If that doesn't fix things and you want to report this to Apple, send a bug report (or enhancement request) via its Bug Reporter system. Join the Apple Developer Connection (ADC)—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report/enhancement request. You'll get a get a Bug ID number; thus, starting a dialog directly with engineering.

Crashing mdworker[9141]: (Error) Import: Importer force killed!

Xserver - Dual 2.3 GHz PowerPC G5 - Running 10.5.6
Machine keeps on crashing every three or four hours - regardless of whether there is one client connection or 30.
Machine hangs and has to be restarted manually.
Console reports (about every minute):
+"mdworker[9141]: (Error) Import: Importer force killed!"+
Was crashing on the same basis with 10.5.5 and 10.5.4 - but was restarting itself and causing only a minor disruption.
Anyone experiencing same thing - found a resolution ? ?

Have a look at the system.log in the Console, which should give more information as to what mdworker is working on that causes it to crash.
I suspect that you may have some corrupt files in your (non-server, user) files/data
that is causing a problem.
For example, I have seen files that were migrated off (an older machine that had had the data migrated off) an older Mac that at some point was left running with a bad PRAM batter and a wildly incorrect date - something preceding the advent of computers as we know them (Desktop computers, etc.) - cause Spotlight to crash when attempting to index said files.

Import Substitute and Related Item relationship via Import Manager

Hi! I have been able to import parent/child relationship (captured in an Excel spreadsheet) via the Import Manager. I have tested with BOM and Sales Packages and it worked fine.
However, I now also want to be able to import relationship such as substitutes and related items and found out that this feature is not available in Import Manager. I cannot do this via matching in Data Manager as there is a similarity in the part number used. However, I guess it may be possible if I introduce a new field to somehow link them together.
Has anyone tried to do a mass load of relationships like these before? If so, would appreciate if you can share your experience in this.
Cheers!
SF

Have to import via Data Manager using a text file. It is important to note that there should be no blanks after the last header field and data line.

What's the best way to import and manage iPhone video?

I don't really want to use iPhoto for importing video - it doesn't seem like it's built with that in mind even though it's the default option for importing both photos and videos. It doesn't have very good (if any) options for filtering just videos or just photos, either when viewing or importing. And I don't want to have videos all jumbled in with photos in my iPhoto library.
I also don't really want to use iMovie every time I want to import videos. I know it's designed for video, but it's far more of an editing app than a management app and I don't want to be editing all my videos or loading up iMovie just to browse them.
I considered Clipstart but it commits a cardinal sin when it renames all my videos in the Finder to a sequential numbering that begins at 01.mov for each new day, creating hundreds and thousands of identically titled movies in the video library, albeit in their own folders, but chaos if you want to search in Spotlight or anything.
So I'm left with Image Capture, which gives me complete control of what I import and where it goes. The problem is that it too doesn't offer a filter for seeing just the videos or just the photos on my iPhone. My photos are all being imported automatically by Photostream so I only want to grab the videos. If I set 'view by width' it seperates out the videos because they have no width tag, but then they aren't displayed by date order so I can't easily find the new videos I've not imported before.
So... what do you do?

That's exactly the sort of crafty workaround I like. I didn't know they were all tagged, but that would definitely work. I'd still love a dedicated app that did it really well, or more love given to that side of things in iPhoto. iMovie is too hefty for just managing them.
Is iPhoto properly built to handle management of iPhone video, by the way? I didn't want to use it because it didn't seem like it was, and also because I sync my iPhoto library with Dropbox and video would more than treble the size of the library so I manage it from the Finder mostly, importing clips to iMovie if I do want to edit something (rarely).

I can not get my IE 8 favorites over to Firefox (ver.25.0.1) bookmarks even after exporting IE fav. to html file and then in Bookmarks importing thru Manager!!

using XP professional, have hundreds of Favorites in IE 8. I can not get them over into Firefox either directly from the Bookmarks Manager (show all bookmarks/import and backup/Import data from another browser OR by exporting the Favorites in IE 8 to a html file (did) and then coming back over to Firefox Bookmarks and using the Bookmarks/show all bookmarks/import and backup/import bookmarks from html file. I find the file, double click it open BUT nothing happens in the Bookmarks Library???
It is not a case on some come over - nothing happens??

Did you try a search in the Bookmarks Manager (Library) for some know bookmarks?
Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
You can check for problems with the places.sqlite database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file

Imported sealed Management Pack and its not showing up in Data Warehouse Job MPSyncJob

Hello,
When i try to Import a sealed Management Pack (with defined new Dimensions for Data Warehouse) it works fine, and it shows up under Management Packs under the Administration Pane. But its not showing up in the Data Warehouse Job "MPSyncJob".
No errors in the Eventlog on the DW Management Server and cant see any errors in failed Data Warehouse Jobs either.
I imported the MP three Days ago and still nothing.
Now what?
/Maekee

I have a smaller SCSM Lab that i can import this MP in and the classes are created in the DW. Now is the question why its not working in my PreProd env and why i dont get any errors in the Event Log? Anyone that can Point me in the right direction for
this?
/Maekee

Camera will not show for import in managed account

In my administrator and one managed account, when I connect my kodak digital camera it displays for import. In another managed account despite enabling access to image capture, selecting iphoto for import in image capture and fixing permissions, neither image capture or iphoto show the kodak camera for import. I also tried removing the preference files from that user's library for iphoto and image capture. Help!

Hi ckauf49!
Thanks for the post.
The camera may not show an image on the LCD screen if the camera is not set for live view shooting. However, it will always display the menu on the screen if you press the MENU button. If it does not, then the camera will need to be serviced. To start this process, you'll need to complete a Repair Request on our website.
This didn't answer your question? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Runtime error when trying to use "Discover" button to import externally managed dimensions in developer studio.

Hi all,
I get the following error when using "Discover" to import dimensions in endeca develoepr studio
This application has requested the Runtime to terminate it in an unusual way.
Has anyone else encountered this issue?

Hi,
Another way to "find" the URL for the oamconsole, that I use if I'm not familiar with the configuration I'm working on is to first log into the Adminserver WL Console, then go to "Deployments".
Then, find "oamconsole" in the Deployments listed (on the right).
Click on that, then on the next page, look for the "Testing" tab. Click on the "Testing" tab, which which show the /oamconsole app.
Click on the "+" to expand the tree, and you should see a bunch of different URLs on the right, e.g., if you have OAM console deployed to managed servers, etc., there'll be different URLs for those, etc., and you can just click on the links to open up OAM Console in your browser.
Jim

Relationship import | Import manager

Similar Messages

Maybe you are looking for