Release of Operation

hi
After operation release and production order is tired to save, The system creates a short dump and status is not get updated. The short dump shows the error in program line which the system is not able to find data in JEST_UPD However the table contain proper data.
such type of problem is found for a certain production order only. This problem is particular  production order are having PREL and PCNF status (header status)
Can any one explain/give check list for cause of error
Thanks
Suresh

Hi
thanks, i will check for consistence as per said note .here below given information is about the short dump. If u can interpet, pls give the explaination
ABAP runtime errors    ROLLBACK_IN_POSTING          
       Occurred on     27.06.2008 at 12:21:04
Invalid ROLLBACK WORK in an update function module.                           
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLBSVU " in                 
"STATUS_UPDATE".                                                              
The main program was "RSM13000 ".                                                                               
The termination occurred in line 141                                          
of the source code of program "LBSVUU01 " (when calling the editor 1410).     
The program "SAPLBSVU " was started in the update system.  
Source code extract
001110       IF sy-subrc NE 0.                                                  
001120         SORT jest_ins BY mandt objnr stat.                               
001130         LOOP AT jest_ins.                                                
001140           SELECT SINGLE FOR UPDATE *                                     
001150                  FROM jest CLIENT SPECIFIED                              
001160                  WHERE mandt = jest_ins-mandt                            
001170                  AND   objnr = jest_ins-objnr                            
001180                  AND   stat  = jest_ins-stat.                            
001190           IF sy-subrc -chgnr = '999'.                                    
001390       endloop.                                                           
001400       UPDATE jest CLIENT SPECIFIED                                       
                  FROM TABLE jest_upd.                                   
001420     ENDIF.                                                               
001430   * Verbuchung Änderungsbelege                                           
001440     DESCRIBE TABLE jcdo_tab LINES sy-tabix.                              
001450     IF sy-tabix > 0.                                                     
001460       INSERT jcdo CLIENT SPECIFIED                                       
001470                   FROM TABLE jcdo_tab.                                   
001480     ENDIF.                                                               
001490     DESCRIBE TABLE jcds_tab LINES sy-tabix.                              
001500     IF sy-tabix > 0.                                                     
001510       INSERT jcds CLIENT SPECIFIED                                       
001520                   FROM TABLE jcds_tab                                    
001530                   ACCEPTING DUPLICATE KEYS.                              
001540       IF sy-subrc NE 0.                                                  
001550         SORT jcds_tab BY mandt objnr stat chgnr.                         
001560         LOOP AT jcds_tab.                                                
001570           SELECT SINGLE FOR UPDATE *                                     
001580                  FROM jcds CLIENT SPECIFIED                              
001590                  WHERE mandt = jcds_tab-mandt                            
001600                  AND   objnr = jcds_tab-objnr

Similar Messages

  • Operations released at operation level

    Hi..
    In my production order, I am releasing the operations at the operation level. I want a list of released operations based on the work center and dates input. In my order there may be 2 or 3 operations on the same work center. I checked the COOIS report. COOIS report is giving all the operation list even though I released only one operation in the order. I am selecting workcenter name, dates and status as REL. Please let me know, what could be the problem. If there is any other way of finding this... please let me know.
    Regards,
    Surya.

    Surya,
    It is simple follow what ever you have done.... in addition to that you need to create a layout.
    Once you execute the transaction COOIS with List = "Operations", Profile = "Worlist per workcenter"(Or Std as you require), for now leave the layout field blank and at operation level status you give "REL" execute.
    This just excludes all orders with CRTD status, but it will include the orders which has PREL, for this we shall create a small layout to filter to show all operations with status "REL".
    Now hit the layout settings Icon ---the third from the right just above the order list, there you select change layout. Now "Change Layout" popup screen appears, select the "Filter" tab and pull the field "System Status" to the Filter critera side, it will popup the system status field...here you type "REL" and save the layout. Now you would have noticed that system has removed all operations with status "CRTD" from the list.
    Now when running COOIS transction next time in the intial screen itself you need to select the newly created layout, so that you get an output of only "REL" status orders.
    Hope this helps....please close this thread,
    Regards,
    Prasobh

  • Single work order to release 2 operation from Task list 1 month and 6 month

    Hello,
    We have a maintenance plan for an equipment. It has a task list with 2 operation: Operation 0010 is 1 month interval and Operation 0020 is 6 month intervals.
    Currently when the preventive maintenance plan is release, 2 work order are created for every 6 months.
    Is it possible to combine the One month interval and 6 month interval task to a single Work Order?
    Thanks.

    For 1 month freq, orders will be created every month. In 6th month, order will be created with one month & 6th month operation together.
    If you want to suppress one month operation while order is getting created with 6th month operation, mention higher hierarchy for 6 month freq in strategy. This means, mention hierarchy 1 for 1 month freq & 2 for 6 months freq. While both the operations are due, operation with higher hierarchy only will be taken over to the order.
    I guess, this what you expect. Please confirm.

  • User exit for Service order release ( needed operation details as import )

    Hi All,
       I need a user-exit while service order release( tcode : IW31 ) activity . I find some of the exits, but none of those not having "Operation" details , all are having only header details. Please suggest if any user-exit is available for this or BADI . I tried with badi "ALM_ME_001_ORDER" , its not triggering at all while creation of service order.
       Is there any way we can get from operation data from buffer, please suggest me the same.
    Thanks in advance,
    Pavan.

    Hi Thomas,
       Thanks for reply. I saw the function exit which you mentioned , but it didn't have the operation details in import.
    Regards,
    Pavan

  • Favicon does not show up on Google chrome and firefox with new muse release. Opera showing favicon ok.

    Favicon does not show up on Google chrome and firefox with new muse release when exporting HTML or publishing with FTP. Opera showing favicon ok. Previews Muse release was working fine.
    this website was created with one update back BK Foto
    this one page was updated with latest updated Muse and after publishing with FTP through Muse favicon does not show up Paslaugų Era | Foto Video Paslaugos

    Export your HTML and then Just edit index.html with any text editor look for sentence <link rel="...................................>
    Then delete all this sentence and copy this one
    <link href="//PATH/favicon.ico" rel="shortcut icon" type="image/x-icon">
    PATH = Where you have your favicon.ico
    I usually copy the favicon.ico in the folder images so the sentence will be like this
    <link href="//mydomain.com/images/favicon.ico" rel="shortcut icon" type="image/x-icon">
    i hope it helps you
    Sorry about my english, my spanish is much better
    Juan Pedro Avila

  • Relese of PP operation - Triggered twice? (AFVC_PM-RELEASED)

    Hi
    When we release an operation of an PP-order the Event AFVC_PM-RELEASED is triggered twice.
    This is a problem for us since we have a linked interface when the status is set to RELEASED.
    We only want the status to be changed once - otherwise we get two calls to our interface wich causes error.
    Do you know why that EVENT pop up twice?
    Best reg
    Henrik

    Check the linkage table. Did you link this event twice? If you have a subtype, check if the event is linked for the super- and sub-type.

  • Single Operation release reverse.

    Dear Friends,
    I am going for individual operations wise release. In this case if I want to reverse a single operation...how can I do it manually. I want to reverse the release of operation before confirmation. Please let me know...how this is possible?
    Regards.

    Hi Kodand,
    I donot think to direct option to reverse the released Operation.
    if u use "Read PP master data" option in Prod order Header screen, Released (REL)  staus reset as Created (CRTD) for Order level & for all operations.
    Note:All Opeartions staus are  reset as CRTD not for single one. 
    Regards
    Pradeep

  • Release of Production Order at operation level

    Dear Experts,
    Production order to be released at operation level automatically one by one, after confirmation of operation.
    Let us suppose
    Op 10 ...... 10 Confirmed
    Op 20 ...... 10 Confirmed
    then in the Op 30 ..... 4 Qunatity to be released automatically once Operation 20 is confirmaed.
    Please give your valuble inputs
    regards
    Ram Kumar

    Dear Experts,
    Production order to be released at operation level automatically one by one, after confirmation of operation.
    Let us suppose
    Op 10 ...... 10 Confirmed
    Op 20 ...... 10 Confirmed
    then in the Op 30 ..... 4 Quantity to be released automatically once Operation 20 is confirmed.
    How to create trigger point for this?
    Can anybody give clear idea, what all the fields I need to maintain ?
    regards
    Ram Kumar

  • Production order release based on operation

    Hi friends
    How to release production order based on operations ?
    pl help me

    Hi
    The real time scenario is to select release operation wise is:
    If you are expecting any change in the subsequent operations after starting of production  say first opration, you will opt for this .
    I do not find any advantage if you release all operations at a time in mass processing. It is as goods as releasing at header level.
    Normally in such cases one can opt for  trigger points in which system will release successive oprations automatically when preceding operation is confirmed.
    If you want manually release the operations you can select the operation which you want release & press release button in operation overview screen.
    Hope it is clear now.
    Regards
    YMREDDY

  • Want to Create batch in process order at a time of Operation release.

    HI,
    We are going to release operation one by one for process order. There are 4 operations in my process order. I want to create batch in process order header when i release first operation.
    Is there  way i can set the Production Scheduler Profile  to PREL to create batch at header level.
    Thanks in advance!

    Thanks for the Information,
    to my understanding, all the Operation controls are in Operation control key.
    There is No Batch creation functionlaity assiciated with Operation control key.
    Look for a user exit to create the Batch with the PREL of the Header or REL of the 1st operation.
    Regards
    Ratan

  • What Function/Features you want to have in next Sun Studio release?

    Hello,
    My name is Ngoc Nguyen, from Sun Studio product team. We just shipped Sun Studio 12 ML release (for C, C++, Fortran compiler) past few weeks. We start working on the next release. This is the right time for the community to tell us what feature you want to change or add into next release.
    HOW?
    Please use the following instruction. It seems long at start, but both you and Sun will get benefit from it on the long run. i.e: By this way, All of your suggestion/request will be logged into our worldwide database system and is assigned an Request for Enhancement (*RFE*) ID. Later You can view the progress of your suggestion/request by using this RFE ID.
    - Go to http://bugreport.sun.com/bugreport/
    Check the box at the bottom of the page
    Click on "Start a new Report"
    - Select the following
    Type = Request for Enhancement
    Product/Category = C/C++/Fortran Compilers and Tools - Misc
    Subcategory = C/C++/Fortran Compilers and Tools - Misc
    Release = Other
    Operating System = <your choice>
    - Click on "Continue"
    - On the next screen, you only need to fill out the required fields indicated by *.
    - The "Synopsis" field should be start with "VOC" word. VOC stands for "Voice of Customer". i.e: "VOC: I want to increase performance on xxxxx component".
    - The "Justification" field is important too. general statement like "It is important for us" may not look attractive.
    - After all, click on "Submit"
    This input collection process will last 10 days and will be ended on Wed Oct/31st.
    Looking forward to hear from you.
    Best Regards,
    Ngoc Nguyen
    IMPORTANT: Please don't post your suggestion/request on this forum thread because nobody will help you to log your suggestion into Sun System. Please use the method I outlined above.

    Hello,
    My name is Ngoc Nguyen, from Sun Studio product team. We just shipped Sun Studio 12 ML release (for C, C++, Fortran compiler) past few weeks. We start working on the next release. This is the right time for the community to tell us what feature you want to change or add into next release.
    HOW?
    Please use the following instruction. It seems long at start, but both you and Sun will get benefit from it on the long run. i.e: By this way, All of your suggestion/request will be logged into our worldwide database system and is assigned an Request for Enhancement (*RFE*) ID. Later You can view the progress of your suggestion/request by using this RFE ID.
    - Go to http://bugreport.sun.com/bugreport/
    Check the box at the bottom of the page
    Click on "Start a new Report"
    - Select the following
    Type = Request for Enhancement
    Product/Category = C/C++/Fortran Compilers and Tools - Misc
    Subcategory = C/C++/Fortran Compilers and Tools - Misc
    Release = Other
    Operating System = <your choice>
    - Click on "Continue"
    - On the next screen, you only need to fill out the required fields indicated by *.
    - The "Synopsis" field should be start with "VOC" word. VOC stands for "Voice of Customer". i.e: "VOC: I want to increase performance on xxxxx component".
    - The "Justification" field is important too. general statement like "It is important for us" may not look attractive.
    - After all, click on "Submit"
    This input collection process will last 10 days and will be ended on Wed Oct/31st.
    Looking forward to hear from you.
    Best Regards,
    Ngoc Nguyen
    IMPORTANT: Please don't post your suggestion/request on this forum thread because nobody will help you to log your suggestion into Sun System. Please use the method I outlined above.

  • How to change status of operation (Production order)

    Hi all,
    I would like to know if there is a way to change the status of an operation for an operation order.
    I found a BAPI for changing the status of the production, a function module to get the status of an operation but nothing standard for changing the status of an operation.
    The solution is using a call transaction?
    Thanks for your help!
    David

    Dear,
    It is not clear what you want to do. Usually the operation system status is driven by the way you release the operation or at headre level. On the other hand you can influence the user status as per your logic. Please let us know you are looking for which status?
    Raj

  • Dw.sap processes do not release memory on Suse SL9

    Hello,
    We have an ecc6 Ehp4 system running on ;
    One Central instance ; Hp-ux ia64
    6 Linux Dialog Instances ; Linux SUSE SLES9/X86_64 64BIT
    More than 30 Gb of physical memory have been assigned to each Linux application servers, but
    we are facing memory bottlenecks. after analysys, it turns out that some sap processes dw.sap
    do not release the memory.
    At the sap level, the DIA or BTC process is not running anymore.
    At the OS level the corresponding dw.sap process still uses big chunk of memory
    p01adm   10674  2.9 45.4% 20081372 14955448 ?   S    Oct03  77:58  |   \_ dw.sapP01_D01 pf=/sapmnt/P01/profile/P01_D01_aor3p01a1
    p01adm   20839  6.4 48.5% 20091644 15992276 ?   S    Oct04 121:43  |   \_ dw.sapP01_D01 pf=/sapmnt/P01/profile/P01_D01_aor3p01a1
    p01adm   25379  5.8 47.6% 20085096 15670868 ?   S    Oct04 106:47  |   \_ dw.sapP01_D01 pf=/sapmnt/P01/profile/P01_D01_aor3p01a1
    p01adm   29367  6.1 44.7% 20086804 14735952 ?   S    Oct04 110:44  |   \_ dw.sapP01_D01 pf=/sapmnt/P01/profile/P01_D01_aor3p01a1
    p01adm    1326  3.8 41.6% 20078600 13703268 ?   S    Oct04  66:53  |   \_ dw.sapP01_D01 pf=/sapmnt/P01/profile/P01_D01_aor3p01a1
    p01adm   21643  6.3 42.3% 20087888 13951496 ?   S    Oct04  98:53  |   \_ dw.sapP01_D01
    I had a look at SAP note 706071, but it doesn't corespond to our issue, anyone has any idea ?
    thank you
    Regards
    Raoul

    > * 6 Linux Dialog Instances ; Linux SUSE SLES9/X86_64 64BIT
    You're aware that SLES 9 is out of support since August 2011?
    Note 936887 - End of maintenance for Linux distributions
    > More than 30 Gb of physical memory have been assigned to each Linux application servers, but
    > we are facing memory bottlenecks. after analysys, it turns out that some sap processes dw.sap
    > do not release the memory.
    A SAP system uses shared memory, it's allocated on system start and not released until the system is stopped.
    If you run out of memory I would suggest that you check your memory configuration.
    > At the sap level, the DIA or BTC process is not running anymore.
    > At the OS level the corresponding dw.sap process still uses big chunk of memory
    They are attached to the shared memory segment, this is not exlusive memory.
    > I had a look at SAP note 706071, but it doesn't corespond to our issue, anyone has any idea ?
    Usually it's not a problem if the memory keeps being allocated if the system is properly configured. Shared memory disclaiming is available on Linux but it's not supported on your operating system.
    Note 724140 - Extended memory, release for operating system
    I would suggest that you first check your memory parameters, execute on an application server as user <sid>adm:
    sappfpar pf=/sapmnt/<SID>/profile/<instance_profile> check
    and post the output.
    Markus

  • Blue screen of death with windows seven

    Ok to begin, I understand that Im using a release candidate operating system but I would appreciate any help.
    When I'm watching a slow I get a blue screen of death. With the fallowing error details:
    Problem signature:
      Problem Event Name: BlueScreen
      OS Version: 6.1.7100.2.0.0.256.1
      Locale ID: 1033
    Additional information about the problem:
      BCCode: 124
      BCP1: 00000000
      BCP2: 8556301C
      BCP3: B6602000
      BCP4: 05000135
      OS Version: 6_1_7100
      Service Pack: 0_0
    I did not have this trouble when I was using windows Vista.
    My pc specs are:
    9600 Phenom BE
    9600 Nvidia GT
    Gigabyte motherboard
    Please let me know if you can help.

    princezuda wrote:
    I read the info you wrote and it said version 6.1.7400 if it is windows 7 shouldn't it be version 7?
    Windows 7 really is version 6.1 (Vista was 6.0).
    Same as Windows XP was version 5.1 (Windows 2000 was 5.0).

Maybe you are looking for

  • Function as Attribute in SQL raising error

    I have a problem I have a stored procedure 'test_p' and a function 'test_sub'. The Stored Procedure 'test_p' calls function 'test_sub' from a SQL. What I'd like to have is the error from the function to be raised to the 'parent' stored procedure. Wha

  • Translations in production system.

    Dear experts, We're currently reviewing all modified objects in an upgrade project to ECC 6.0 and we are seing that there are lots of objects directly translated in the production system. If we reset to original this objects in the development system

  • Why is mail crashing so often?

    Mail on Lion is crashing almost every day usually when I am writing an email, often when editing or cutting and pasting text into an email. Restart gets most of the email back, but still frustrating

  • Is it possible to start incompleteness check for VBBK manually

    Hi, I have following problem. We have to change the values of the fields VBAK_LANDTX and VBAK-STCEG_L depending on other data of VBAK,VBAP,VBKD automatically. We do this in the USER-EXIT USEREXIT_MOVE_FIELD_TO_VBAK. That works fine. The User is not a

  • How to Retrieve data from Variant Table

    Can anyone help me by telling how to retrieve data from variant table which was created by user. I am able to see data of variant table only thru cu60 transaction but not se11. I s there any function module to do this?