Release Strategies not works - When multiple material group in a single P.O

Hai,
This related to Release Strategies in SAP- IS -Retail.
The Material group was one of the character in the Rel Strgy.
1) If i create a P.O for the item which is related to " X" material group , Rel Strgy been set to P.O
2) If i create a P.O for the item which is related to " Y" material group , Rel Strgy been set to P.O
If I combine material group "X' & "y" in a same Purchase order , then RELEASE STRATGY NOT BEEN SET TO P.O .
How to make this as possible in SAP -IS-Retail - Version 6.0
Thanks,
PS

Hi,
Generally it is not advisable to use item level characteristics for overall release . Please refer the sap note 493900
Cost Center values (CEBAN-KOSTL) and Vendor values (CEBAN-LIFNR) in the release strategy characteristics should be entered with leading zeros.
This is true for the other structures as well (CEKKO and CESSR). See note 52225.
For OVERALL RELEASE (purchase order and purchase requisition) the item fields such as Plant and Material Group will be aggregated to header level.
For example you use Plant as one of your characteristics. If all items do not belong to the same plant then the relase strategy will not be found unless you have maintained a blank value as one of your allowed values for the characteristic Plant. If all items belong to the same plant then that plant is aggregated to the header; if one or more is different then a blank is aggregated to the header. See note 47089.
you have to maintain blank value in CT04 for material group and the same thing must be maintained for all strategies.
The release procedure for purchasing documents is carried out on header level. For this, the following values are aggregated from the items on header level:
item value
plant
material group
Example WERK:
The plant is only aggregated on header level if all items contain the same plant. If only one alternative plant exists, ' ' is aggregated on header level.
A release strategy is then searched for with this value.
Of course, a corresponding strategy is only found if the value ' ' was maintained for the characteristic 'Value' as an object value.
The same functionality applies to the plant

Similar Messages

Release strategy not working - no multiple releases

Hi All,
Thanks for your help.
I have resolved that issue.
Now I am facing another problem.I am having release strategy with release codes R1,R2,R3,R4.
For certain amount say 1-99 I need only R1 approval.
and 100-199 the Po should go to R2 approval only and for 200-299 it should go to R3 level approver.But for amount >300 PO need both R3 and R4 approval.The PO should go for R4 Release after R3 Release.
R1,R2,R3 levels are working fine as the PO goes only at one level.But for R4 it not working.
The users are selected based on the roles assigned.
I am using a Ztable to get the roles where release code,group and roles are populate.
For each Release code are assigned Say for R1 it is ZR1 and R2 it is ZR2 etc...for each level the users selected based on roles say for R1 ---users will have roles ZR1.
But at R4 level I need to select the users for both ZR3 and ZR4.
When I am triggering the WF using Purchase order as Po number and Release code as R4 it is not selecting R3 roles.
I am using the user exit for the user determination based on roles.
Can anyone please help me on how to resolve this.
Thanks and Regards
Raju
<MODERATOR NOTE: Original post in [this thread|Release strategy not working; moved to new question>
Edited by: Mike Pokraka on Jun 20, 2008 10:47 AM

Hi Sujoy!
Thanks for the resolution.
My question is: Currently, plant is set as one of the characteristic in the release strategy. Hence, this problem!!
Now, we need to remove this "plant" and maybe consider including Company code or Purchase organization as the characteristic.
1. Pl tell me how to implement this?
Regards..

Exchange Impersonation not working when applied to group or OU

I am trying to set up Exchange Impersonation so a specific account can impersonate a group of users. I have successfully set it up and tested to impersonate a single user but it will not work when I apply it to either a distribution group or OU, even though
Exchange accepts my commands. The commands I'm using are;
New-ManagementScope -Name ScopeName -RecipientRestrictionFilter { Displayname -eq "All Group Staff"}
New-ManagementRoleAssignment -ScopeName AssignmentName -Role ApplicationImpersonation -User [email protected] -CustomRecipientWriteScope "ScopeName"
When I try the above for a single user instead of group it works fine. I am using EWSEditor to test. The error I get on the group is;
The account does not have permission to impersonate the requested user.
Type: Microsoft.Exchange.WebServices.Data.ServiceResponseException
Source: Microsoft.Exchange.WebServices
ErrorCode: ErrorImpersonateUserDenied
ErrorMessage: The account does not have permission to impersonate the requested user.
Should I be using a different filter or parameter to get this working for a group of users? Please note I don't want to apply this to all users in the organization.

Hi,
Thanks for your response. It's great to hear the good news. What's more, if you have issue with Exchange impersonation, welcome to our Exchange Server Development forum, forum which is staffed by more experts specializing in this kind of problems. Your understanding
will be appreciated.
For your convenience:
https://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrdevelopment
Hope this can be helpful to you.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Amy Wang
TechNet Community Support

ActiveX not working when multiple uploads is selected

When using the multiple uploads function on SharePoint 2010 some of my clients get a red cross over the activeX control and some do not. All clients receive a GPO that adds the URL to trusted sites and all browser versions are IE9 x86. I've even installed
the latest version of flash activeX but that made no difference. One thing I have noticed is that some clients get the red cross and then get a pop-up asking if they want to allow the activex content. When they click allow the control then works. I don't understand
why some clients work fine, some get prompted then work and then there are some that just do not work nor do they get prompted! Thanks
PS. I have just discovered that MS Office is not installed don any of the problem PC's! Apparently there is a DLL that is needed to upload this way. Problem is I do not want to install office on all of these PC's.

Hi JazzyN,
According to your description, my understanding is that you want tot use Upload Multiple document feature without installiing Office in SharePoint 2010.
The feature is based on an ActiveX Control called STSUpld.UploadCtl, a dynamic-link library (DLL) that is installed on the client computer in the %ProgramFiles%\Microsoft Office\Office14\ directory during Microsoft Office 2010 Setup. Without this control
, the feature will be not available for SharePoint 2010.
I am not sure whether the AnctiveX Control could be added into IE without Office 2010/2013 installing, you can have a try. And you can create a new thread on IE forum, more experts will assist you with this issue.
As a workaround, you can install SharePoint 2010 Deisgner on the client machine, then you can also use the ‘Upload Multiple documents’ feature in SharePoint 2010.
More information:
http://social.technet.microsoft.com/wiki/contents/articles/11234.sharepoint-2010-how-to-enable-uploading-multiple-documents-functionality.aspx
http://blog.netnerds.net/2012/02/sharepoint-2010-obtaining-stsupld-dll-without-installing-microsoft-office/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Scanner not working when multiple users log in

Hi experts,
Our client is using Teklogix scanner in Warehouse. I have developed a Z transaction for scanners which come by default on scanner.
Everything was woking fine but now as more users start using it we are facing a strange problem.
If users try to scan barcode on two scanner at the same time they get a message LOCK-H which means communcation between teklogix server and SAP broken.
please let me know how to solve this.
Is this a problem with some configuration in SAP ?
Thanks in advance
Madhu

Hi,
Two minutes not sufficient to trigger an alert. Atleast need 15 mins to trigger the alert.
Thanks & Regards,
Nagarajan

Why does Flash not work with multiple user-accounts on a single PC?

Running XP-Professional (MediaCenter), SP3 and using IE 8, NIS 2010 (disabled during the installation of FP), 3 different user accounts on a single PC
As user A (admin) installed FP ver. 10.0.45.2, and it works fine under the admin account, however, when logging-on as user B. FP is not recognized (?) and user B is asked to intall FP agian, however, the installation fails.
After removing the FP installation (as being user A) and then install FP as user B (who has also admin rights) , FP works fine for user B, however for user A, FP is not installed/recoginzed (?), and user A is being asked to install FP, however that installation the fails, and so on and so on , . . . . .
Any suggestion to resolve this irritating behaviour?

Hi busy, there is a thread that discusses this very issue with links, that includes screenshots which you may find helpful.
http://forums.adobe.com/thread/584941?tstart=0
Regards,
eidnolb

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

Partner function not working when creating PO with ref to PReq

Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
however it works when i create the PO directly ( without the PR ref )
I am using the same material & Plant for both manual PO & PR to PO.
Any idea what could be wrong .
I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
Thanks
Dkmurthy

Hi,
I have also an issue that seems similar to one you are discussing.
When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N
Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
Any input is wellcome.

My volume is not working when on the ringer what do I do

My iPhone volume is not working when I have the volume set on. It will work with the headphones but other then that nothing. What's going on with it?

supposedly from what I have read it is a software issue. I actually am also having this problem it worked after I performed a full reset, but now it has started again tomorrow I am going to the apple store to find out what I can do as I bought my 4s right before the 5 was released.

[Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

When selecting a menu item I used to click the left mouse button and hold it down, move the pointer to the desired menu item and release the mouse button. Everything works fine in the mine menu, but there's a problem when adding new adjustment layer from the layer panel: when I release the button nothing happens, I have to press the button again. In previous PS version it worked fine. How can I fix this?

I don't think that is user fixable, meaning you'll have to wait till adobe fixes it with an update.
Photoshop cc 2014
windows does not work
mac does work
Did you already post over here:
[Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS

Any idea why is Bridge latest version not working when trying to open it in Photoshop CC 2014 ? (French version) ? When trying, Creative Cloud app will open to ask if I want to download newest version, which I did numerous times now.
Thank you
Guy Deschenes
Shawinigan (QC) Canada

Hi Eric,
Here's how a similar problem was resolved between PS and BR.
The issue was confirmed by ChunXiaYang at Adobe staff and solution put in the forum discussion on June 19 (no. 13). Here's a copy:
I have confirmed that this is a known issue before release. And the workaround is to uninstall and reinstall PS 2014. Then Bridge can be launched by selecting 'Browse in Bridge' in PS2014.
Please try the installation, and let me know whether it works. Thanks!
It woks just fine since I unistalled and reinstalled PS 2014.
Guy
Le 2014-07-17 à 1:13 PM, ericboerner a écrit :
I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS
created by ericboerner in Bridge General Discussion - View the full discussion
I did this with a fresh install of the entire CC package. As soon as the CC packages updated, CC Bridge broke. Unistalled CC PS, reinstalled again, CC Bridge works, but CC PS updates itself again, and breaks CC Bridge.
You know... The whole move to CC has been a massive cluster... I've struggled with the CC packages for my entire subscription year, and now I'm 1.5 month away from needing to throw down another $720 for no reason what-so-ever, just so we can Beta test your really screwed up subscription services.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6559164#6559164
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

SP2013: OK button not working when editing Settings on List app

Hi, all! Currently running Sharepoint 2013 under Server 2008 R2. My client is Win7 Pro/64-bit running lastest Firefox, Chrome & IE11. I am currently a Domain Admin for our corp domain.
Long story short, I've created a test List app. When I attempt to add a column to the layout of the custom list app, nothing happens when I click the OK button to save the app. No access spinning, no errors on-screen (also none visible when I view
the source of the SP page or header), no nothing. The highlight of the button changes as expected, but nothing else. The Cancel button will Cancel as expected, but OK does nothing whatsoever.
My current permissions include member of Domain Admins, Site Owners (Full Control), and Visitors (Read). A Check Permissions on myself yield the following:
Full Control | Given through the "~site~ Owners" group.
Read | Given through the "~site~ Visitors" group.
Edit | Given through the "~site~ Members" group.
(Note: "~site~" is replacing the actual SP2013 site name above)
I'm thinking it has something to do with effective permissions. I just added myself to the Owners group this morning with no effect. I've also tried both Compatibility mode on and off in IE, and Firefox and Chrome don't work, either. Suggestions
are most welcome as I'm at the point where I'm not sure if IE11 is causing a problem or if it's actually an effective permissions problem that's preventing me from saving any column changes to the List app above.
Thanks, guys!
Steve

Hi Steve,
From your description, my understanding is that OK button does not work when you create a new column.
Please check if you get any JS error after you click OK button by pressing F12 to OP developer tool.
Besides, please try to create a new column with steps below:
1.
Click LIST tab in the Ribbon.
2.
Click Create Column in Mange Views section.
3.
Create your column in the dialog.
4.
Click OK button.
In addition, please confirm these points below:
1.
Test your issue in another list.
2.
Test your issue with another computer.
3.
Test your issue with another account.
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Output Tray 2 does not work when we print a smartforms document immediately

Dear printer specialists,
we've the following issue:
We are printing the same smartforms document in different plants. One plant decided to get the print output into output tray 2 of the printer (lower tray), so we've copied the standard device type into a z-device type and made the SPAD set-up with a preselection for the tray 2 (lower tray). The new device type has been assigned to the output device. Now we made a test and released the print-output for an immediate printing. The output was printed as before in tray 1 (upper tray). When we restart the output from the spool (SP01), the output will be printed in tray 2. Why does this not work, when we print immediately ? Does anyone know how to solve this problem ? (We don't want to change the smartforms document.)
Thany you for every information to solve this problem.
Kind regards, Wolfgang

HI,
Check if there is a different tra setting in the smartform itself.
/nsmartforms -> <Form> -> Pages and Windows -> FIRST, NEXT, TERMCOND -> field Resource Name
Regards,
Aidan

Form is not working of multiple form check boxs, source posted. HELP.

Form is not working of multiple form check boxs, source posted. HELP.
I'm trying to have golive form be able to check one, two or all of the options in Graphics field.
As is it will only post results from the last checked box.
Here's the page
http://www.perfection-press.com/Pages/ContactForm.html
Here's where source in golive has scanning,design,filesupplied.
[code removed to fix forum topic display]

Since the checkboxes all have the same name, the values are over-writing each other when being passed to the PHP script. The best way to fix that is to add a pair of empty square [] brackets after the checkbox names, so make the names "graphics[]" instead of "graphics". That tells PHP that the values are being passed as a list (an array) instead of a single value. As long as your processing script knows what to do from there (and it does), should solve the problem.
By the way, I noticed that two of the checkboxes were named "graphics" and the other was "graphic" (singular). You'll want to fix that too so they're all the same.

Dynamic drill link is not working when i substitute some parameters in Plus

Hi Gurus,
Dynamic drill link is not working when i substitute some parameters in Discoverer plus(Tools--->Manage Links--->Edit links--->Parameters options), when i substitute some parameters it working when i click on drill value the link is popping up to go another worksheet.For some parameters link is not popping up. Could you please give any ideas.
Thanks & Regards
Vikram

Hi Vikram
Oh gosh, me and my big mouth!
Patch 5381032 has two references to issues with links. You might want to discuss your scenario with Oracle and ask them if this patch would resolve your issue.
Another solution would be to upgrade to 10.1.2.2 (available as a patch on MetaLink) which has most of the fixes from all of the patches applied. Again I would advise you speak with Oracle Support as they are the only one who can actually confirm whether this particular issue was fixed in this release.
Are you by any chance seeing zero numbers display as 00 and are you seeing any graying out of icons? If so, then patch 5345595 (sometimes referred to as 5345528) fixes this and is a good patch to apply if you haven't already done so.
All of these patches require a password which can only be obtained from Oracle by raising a service request to Support and stating the issues that you have.
Hope this helps
Regards
Michael

Release Strategies not works - When multiple material group in a single P.O

Similar Messages

Maybe you are looking for