Release strategy: problems after changing the price

HI Experts,
I have the follwing problem.
I´ve setup the release strategy for Purchase reqs.
The strategy includes 3 approval levels.
release indicator with changeability 4 and a value of 0,1% for the first two approval levels.
I´m able to release it, but if I release the first two appoval levels and change the Preq the release strategy goes back to the first level. Fine.
But the problem is now that I´m able to release the first level but if I try to release the second one I get a error message.
I guess the problem is the changeability - but how can I solve this issue?
The system have the cancel all approvals if someone changes the price.
Any ideas?
Thanks
Alex

HI RJ,
the exact message is "Release prerequisite not fulfilled".
The system should act in the following way:
Approval levels:
1. Supervisor
2. Manager
3. General Manager
1 and 2 is approved.
Then the requisitioner changes the price.
Release will be changeled (Releases already effected will be cancelled).
OK that work, now the release process starts with level 1.
1. Approved --> OK
2- try to approve and get the message "Release prerequisite not fulfilled".
1 and 2 have the same release indicator with 4 and 0,1%.
Thanks
Alex

Similar Messages

PR release strategy reset after change in quantity/inclusion of line item

If a user adds a line item or increases the quantity of an existing line item to a fully released purcahse requisition, then the system does not render the PR for reapproval. Is there any way to configure SAP such that the release strategy resets if any of the above changes are made in a fully approved PR?

Hi,
the release strategy will ONLY be reset if one of the fields that are contained in your classification are changed.
For example
If you strategy is determined by Plant and value, if the plant or value doesn't change then the release strategy will not be affected.
So if you change qty and do not change value then the release strategy will not be reset. This is a basic limitation of the design.
But if you ARE changing one of the characteristic values of your strategy and you are saying that the release strategy is not being reset, then something else is wrong.
Steve B

HP 255 given problem after changing the cooling fan.

Please help, this is urgent. I changed my HP 255 cooling fan after it stopped working. when i finished replacing it with new one, i coupled back my computer and put it on. it came up with a message that the selected boot image is invalid, after series of troubleshooting by going online, i was able to eradicate the message. But am always stuck at a message that said recovery, your pc needs to be repaired. an unexpected error has occured. error code:0xc0000185. i tried repairing the operating system but there was no success. i was able to the a system recovery using HP recovery manager, the recovery was successful, but when i reboot pc after completion of recovery, it still returned me back to the message that my pc needs to be repaired. I cant even boot from the cd because i feel like downgrading it to Windows 7. Please help me, the computer is urgently need to complete my project work.
thanks

Hi - firstly, did you use any sort of ESD protection whilst working on the machine? This should be a priority due to the sensitivity of the devices on the motherboard.
Before suspecting the worst, I would make some basic checks on the hard drive. Firstly, double check it has been firmly pushed back on to the connector (I know, you have probably done this already!)
Restart your computer - when it goes through the repair process, it will offer you advanced tools - click on this.
Select Command Line (CMD) - this will give you a black window with white text. Type the following then hit the enter key -
chkdsk /r
This will take what seems like forever but let it do its thing - hopefully you just have some damaged sectors, this will find and "repair" them (actually moves the data to a better part of the disc and marks the bad sectors so they don't get used in future). Sometimes this is enough to get things working again. When it has finished, you might want to check the system files, if not, simply restart the machine but if you do, type the following into the command line -
sfc /scannow
Again this will take some time but it will find most problems with system files and replace them, however it isn't infallible.
Let me know how it goes....

After creation of PO system should not allow to change the price in PO

Hi There,
In my scenario once PO is created then after send to vendor PO print document,Users are changing the price in PO.so system should not allow to change the price in PO once PO got saved.
So please advice.

Hi,
you could set in customizing for field selection keys the net price
to display for ME22N so that changes can not be made
(transaction OLME -> purchase order -> Define Screen Layout at Document Level).
Please check that you have set all the relevant field selection
groups to display: AKTV, ME22, ME22N... (read and apply note 30316)
Other workaround is try to do by yourself with the badi
ME_PROCESS_PO_CUST and send your own error message.
Regards,
Edit

SBO2007A can no longer change the Price after Discount on marketing docs

In SBO2005A (subjecting to Document Settings), you could change the Price after Discount. Thisis no longer available in SBO2007A (unless you upgrade from SBO2005A with the appropiate settings.
I have not found a customer who thinks this is good idea.
Good to reinstate the functionality.
Regards
Jeff

Hi,
The field "Price after discount" can become editable if you unmark the checkbox "Calculate the row Total using the Unit Price" (Document Settings->General Tab). As default this checkbox is disabled for new installations.
Also, please check the following link as well :
Re: Net price calculation
Regards,
Jitin
SAP Business One Forum Team

You cannot change the price of an item AFTER I check out!

I ordered an XMEN: Days of Future Past box set with a robot head last night for $17.99 plus tax for store pickup online. The total came out to be a bit over $20. When I checked my email today, I was charged $29.99 for the item, and tax based on the new sale price. This is an increase of more than 50%!
It is not legal to change the price of an item AFTER a price is agreed and someone has paid. I would like someone to fix this, as this is a big deal for your customers.
I would like to know what Best Buy can do about this issue? I live in Minneapolis, and would like to believe that our local businesses aren't cheating their customers, especially those in their hometown.

Greetings Kylearin,
I can imagine why you'd be concerned! I'd be surprised too if a price I saw during checkout was not reflected in my order confirmation page.
I've had the chance to review your account and it appears that your order for X-Men: Days of Future Past was submitted on 11/26/2014, shortly after midnight. Since this particular movie was a Deal of the Day item on 11/25 -- and since your order was not received while the lower sale price was in effect -- the price reflected on your order is correct. It's unfortunate if this does not meet your expectations, but remember that you may always cancel your order if you'd like by signing into your account on BestBuy.com.
BestBuy.com > Help Center > Cancel Your Order
http://bbyurl.us/ModifyingOrders
Thanks for your understanding, as well as for taking the time to post.
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Problem in 10gR2 enterprise manager after changing the servers hostname

Hello,
I installed 10g R2 Standard Edition on a Suse Linux Server Enterprise 10.
I have the following problem :
I changed the host name from “a” to “b”.
I made the required changes in listener.ora and tns_names.ora.
I also rebuilded the enterprise manager by starting dbca and click on “Configure database options” etc etc.
After that the WEB enterprise manager seemed to work fine.
I logged on the http://localhost:1180/em as sys/password/sysdba.
Then I clicked on maintenance > Backup setting the PROBLEM OCCURS !!!
I get again the web login page but in the connect string I get the old hostname.domain:1521:SID.
And naturally I cannot login because that hostname.domain:1521:SID does not exist.
Somebody knows how can I correct that?
Thanks a lot
Andreas

Hi,
You should recreate em repository go through below link hope this helps
http://dbataj.blogspot.com/2007/01/oc4j-configuration-issue.html
regards
Taj

Can i change the price after publishing?

We always found pricing of our printed books to be a tricky matter. Find the sweet spot, and you maximize profits.
With printed books, we could test market in limited locations before going national. With ibooks, it's straight to the whole world.
I think ibooks should cost much less than printed counterparts... but how much less? I'd welcome a conversation on the topic.
Meanwhile, we're in a learning curve, and I wonder if I can change the price if we decide we're way off target.
JS

Using iTunes Connect, locate your book in Manage Your Books and click Edit Rights & Pricing.
Note you may risk current ranking being reset if you change the price, so...
As for specific pricing as a topic....not sure if forum rules allow for that, sorry.

Release Strategy for New & Change PO's - Using characteristic CEKKO-REVNO

Hi All,
I have the following requirement/scenario
1. If PO is created manually no reference to PR, then the PO needs to be approved through a release strategy.
2. If the PO has been created automatically either from a req or through SRM (for,eg) then the PO needs to be approved only if this PO has been changed. So this would need to go through a second release strategy.
To distinguish between the two, we are using Version number field CEKKO-REVNO in the communication structure CEKKO to be a characteristic in the release strategy.
This is what I hoped for would work after doing the necessary config,
For create PO's, in my classification I have CEKKO-REVNO as >=0. So any PO whose version number is >=0, will trigger relase strategy S1 (for e,g).
For change PO's in my classification I have CEKKO-REVNO > 0 And whenever you change PO, it will generate versions 1,2,3 and so on, and hence the release strategy will trigger.
The problem
Whenever I use CEKKO-REVNO as one of my characteristics, the release strategy is not triggered at all no matter what the conditions are on the PO. When i removed the REVNO from my classification, release strategy is getting triggered as per plan. I have also activated version management and done all the necessary config. I would like to know why release strategy is not getting triggered when REVNO field is used from communication structure CEKKO. Have any of you experienced this issue before??
Is their any other identifier I can use to address the requirement above? Let me know.
Thanks
Ashvin

Thanks Charlie for your response.
The conditions in the PO is not equal.
On one occasion when I create the PO, I have given the classification as REVNO >=0 with a document type ZB for create (S1). So when I create the PO manually, the version starts with 0, so condition should satisfy here
On the other when I change the PO (with/without reference to PR), I have given the classification as REVNO as > 0 with document type ZC (S2), so when the PO is created initially it will not satisfy strategy S1 as doc type is different for S1. When I change the PO created with ref to req, S2 should take into effect because when i change the version will change to 1 and S2 should trigger because REVNO is > 0 and doc type matches.
So I dont know where the release strategy matches in both S1 & S2 for the system to not propose the release startegy.
Let me know your thoughts.
Thanks for your feedback.

No effect after changing the message mapping

Hi everybody,
i'm using PI 7.1. After changing the attributes in my message mapping i can no see any effect in my result.
Should it be a cache problem? Where can i delete the caches?
regards,
Sid

Hi,
I guess there can be two things.
before going to the tcode sxi_cache...
Please go to the IR, Click Environment, Cache Notification and then select author as your id.
Now see if any are in red status. if so click on the change and click Repeat Cache Notification.
Now press refresh.
I guess this will resolve your problem

Problem after change logon module

Hi,
i'm using EP 6.0 SP13
I want to change my logon page.
the branding_image & branding_text i was changed.
ther are so many forums available regard to logon page.
now i just want to change the copy right tag & remove saplogo from the logon page.
both are referenced in umLogonBotArea.txt
i'm done all step according to help.
now problem was after changing the logon module when i run portal it's give a dump instead of logon screen
when i revert back the original logon screen appear.
so how can i solved this?
regards,
kaushal

Hi Kaushal,
Have you tried the option of going to Direct Editing and changing the logo.
For this goto System Administration-System Configuration-UM Configuration-Direct Editing.
Check the following properties.
#Defines the logon image
(Type: String, Default: '/logon/layout/branding-image.jpg')
ume.logon.branding_image=/logon/layout/branding-image.jpg
#Defines the second logon image (e.g. containing text)
(Type: String, Default: '/logon/layout/branding-text.gif')
ume.logon.branding_text=/logon/layout/branding-text.gif

Give path of your desired image in ume.logon.branding_image and restart the server
Regards
Rajeev.
Do award points for helpful answers in SDN

Poor Printing quality after changing the catridges

After changing the complete set of catridge print quality is very bad and only prining in Magenta & Grey color.
regards,

Please read this post then provide some details. What printer model? What operating system? Are there any error messages on the printer or computer screen?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Problem after activating the ECC 6.0 DIMP

I am getting the serious problem after doing the activation of this ECC 6.0 DIMP by installing some package.
What the problem is that the tables which are having the table class W are giving the problems.
Suppose whenever you are reterving data from this type of tables it is taking so much of time and finally a runtime error is coming showing TIME OUT.
Might be after installing that package we have to regenerate the tables. and how to do that i don;t know.
So all the tables which are having the table class W ,E and S are giving the problems.
For eg table DD02l this is the table for table fields and when i am making some changes in this table by using access key and after that if i have to make activate
it , it is going for short dump and similar cases are there for the tables of the condition type.
Please give me your helpful answers to solve this issue.
Thanks

Hi
From the command prompt following command i am executing
c:\dump\oracle\NT\IA64>sapserver.cmd
After executing the command Screen1 appears
Screen1
**********************************************************************************
Specify the drive letter of the local disk where
you want to install the oracle software
Local Disk Drive [C:]:D:
SID (consists of 3 alphanumeric characters,
starting with a letter (a...z)):D11
***********************************************************************************
After giving the parameter as shown in Screen1 the Screen2 will be popup and it stay for 2min and then close automatically and screen1 will come to normal prompt
Screen2
***********************************************************************************
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from C:\DOCUME1\ADMINI1\LOCALS~1\Temp\Orainstall2007-11-30_08-20-49PM. Please wait ...
*************************************************************************************
I cant found what is actual problem why OUI is not starting
Thanks and Regards,
Vishal Kalekar

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

That is priceless!!! Thanks! I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement. Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
My error msg is a little different from those previously stated, but close: 0xc18a0201. Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100. I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
Oh heavens, I've had the c6280 a whopping 2 1/2 years! I'm sure they want us poor slobs to have to buy a new one every year & a day! To say nothing of the exorbitant prices for ink. And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!! Yeah, & what's with that not being able to print in BLACK if a color runs out????
Anyway I really loved your essay! It's a classic! And says it all! I hate that we have to be 'slaves' to the electronic 'wonders'!!!

Interface getting failed after changing the Business system to that service

Hello All,
Our Env... is XI 3.0 and this is related to produciton env.
Based on our client requirment to change the business system from client 871 to 100 for one of the R3 system which is reciever type(rfc).
After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in the system.
The steps which I have followed to change the Business system.
1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
Then i saved the changes and after that i have activated that interface.
After that when i logged into CC monitoring and viewed that service channels and see the following errors:
Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
Awaiting for your reply.
Best Regards
Rakesh Reddy

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

Release strategy: problems after changing the price

Similar Messages

Maybe you are looking for