Release transfer in Integration Bulder: design

What role or authorizations are required to access Release transfer function in design maintenance of Integration Builder?
Thanks

Hi
Check this
Release transfer
How to use Release Transfer function?
Functionality of Release transfer?
Re: Question On Release Transfer - Urgent.

Similar Messages

PI 7.0 - Design - Release Transfer Question

Hi,
i created a new SWCV to extend a consisting integration scenario design. I'd like to copy the existing objects from the "old" SWCV 2.00 into the "new" SWCV 2.01. I'd like to use the function "Release Transfer", so that i have to change the consisting objects only in one place. I also want avoid to copy-paste all objects and namespaces.
Is this possible? If yes, how can i do this? Are there any howTo's or blogs.
If i just use the wizard, in the end i got always the same error:
Object Interface Mapping IM_History_ALG2IF | http://mynamespace/mapping cannot be imported into software component version SC_JDA , 2.01 of jda.com because it's namespace is not permitted there Define the relevant namespaces in the target version before executing the release transfer
Thanks in advance
Michael

Hi
By using release transfer function, you can transfer design objects within an Integration Repository to other software component versions as follows:
1) From a current software component version to the subsequent version, once development in the current version is finished
2) From a software component version to an older version of the same software component, for example to make a correction available in an older version.
3) From a software component version to a version of another software component. For example, this may be necessary because you may want to stop objects of software components that are based on each other from being available in the sub-software component, and only make them available in the superior software component.
Pls check the following links for details
http://help.sap.com/saphelp_nw04/helpdata/en/e8/e8573ba5f13048be50532fc3fcea9c/content.htm
Regards
Abhijit

Can not release change list in Integration Builder: Design

I got the following error any time i try to release a change list in the integration builder: Design.
#18 13:51:21 AWT-EventQueue-0 ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.ib.gui.operations.rb_commands.MESSAGE_TRANSPORTERROR
com.sap.aii.utilxi.swing.framework.FrameworkException: Errors occurred when transporting the change list
at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:203)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Root cause:
java.lang.AbstractMethodError: com.sap.aii.ib.sbeans.transport.TransportServiceRemote_Stub.releaseForeignChangelist(Lcom/sap/aii/ib/core/clmgmt/ChangeListData;Lcom/sap/aii/ib/bom/gen/XiTypeId;Lcom/sap/aii/ib/core/transport/api/options/ExportOptions;)Lcom/sap/aii/utilxi/misc/api/ICheckResult;
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
at $Proxy6.releaseForeignChangelist(Unknown Source)
at com.sap.aii.ib.client.transport.gen.TransportServiceDelegate.releaseForeignChangelist(TransportServiceDelegate.java:218)
at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:189)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)

See these threads, may be these help you:
Re: Logon to Integration builder & repository hangs
How to use TCPGateway
Search for AWT Enqueue error:
http://backups.lbl.gov/backups/documentation/SysAdmin/4.5/NetBackup_Release_Notes.pdf
BR,
Alok

"Integration Builder: Design" only works well on server

Both TCD: SXMB_IFR and "http://host:port/rep/start/index.jsp" work well on both clients and server.
We know, when we want to visit the "Integration Builder:
Design" in "http://host:port/rep/start/index.jsp",
a logon screen displays.
The problem is i can logon to the Integration Builder with user 'XISUPER' in server,but error message 'Authorizaion error;unknown user name or incorrect password' displays in client with the same user and pwd.
Is any other configuration needed?
BTW: "com.sap.aii.ib.core.sso.enabled" in exchangeprofile;
The host file in the client had been modified successfully.

Hi,
Can you just find out from your BASIS Team if they have followed the following steps while creating the user.
This is a detailed step by step procedure for creating a user:
- On your SAP Web AS host, create the user below with at least the following parameters (transaction SU01).
User : XISUPER
Last name (Tab: Address) : <your_name>, for example XI Super
Password / User Type (Tab: Logon Data) : <init_password> / Dialog

Role (Tab: Role) :
AP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_ADMINISTRATOR SAP_XI_ADMINISTRATOR
SAP_XI_CONFIGURATOR SAP_XI_CONTENT_ORGANIZER
SAP_XI_DEVELOPER SAP_XI_MONITOR
The SAP_XI* roles are composite roles
- Save, and exit SU01
- You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
- You must restart the J2EE engine to transfer the user creation to the J2EE
Also go through this link for more details,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
If its been done exactly in the same manner as explained and if you are still finding the problem do let us know so that we can try finding where exactly the problem is.
Regards,
Abhy

Release Transfer from SAP Basis 7.00

Hi, I am trying to release Integration Process from SAP Basis 7.00 (name space http://sap.com/xi/XI/System/Patterns to one of the SWCV I have been working on. The Release Transfer is not working complaining about name space does not exist in my SWCV, whereas I have created the http://sap.com/xi/XI/System/Patterns.
Is there way to do this...?
Thanks

>>http://sap.com/xi/XI/System/Patterns.
You can not use http://sap.com....... in your custom namespace.This is reserved for SAP Standard namespaces.
Please change that to http://yourCompanyName.com....... and then do a release transfer.
Thanks
Aamir
Edited by: Aamir Suhail on Jul 6, 2009 9:58 AM

Release Transfer - S/W Component Version - Conflict

Hello Alll,
I did a release transfer of a particular Namespace from S/W Component Version u2013 1.0 to 2.0. By transfer I didnu2019t get any error message, but after the transfer, I found some of the message types still shows the older S/W component version i.e. 1.0.
This happens only in u201CProcess Integration Scenariou201D that too partly. Other components of the name space displays right version i.e. 2.0. If anyone overcame such a situation, please let me know the procedure to avoid such a conflict.
Best Regards,
Satishkumar, Dhamodharam.

Satish,
Either you or someone else might have changed the process integration scenario manually in 2.0 version that is causing conflict.
You can check the history and object versions to make sure who did it and what has been done during this manual change.
If the manual change done is not necessary then go to conflict tab, click on the object and select the latest 2.0 version object (displayed object button) and save it
To avoid this happening from next time, do not make changes to 2.0.... watever changes are required, do it in 1.0 and do a release transfer
Venkat.

Objects locked after crash in Integration Repository (Design)

Hi there,
Unfortunately the integration repository (Design) crashed during an import of some IDOCS from a R3 system.
Now when I try to login again into the Integration Repository and do any changes in the software component, I get a warning telling me that the object Im trying to edit is currently beig edited by my own account.
How can I remove this object lock so I can continue working with this object? is there any admin tool from where I can release the locked objects or something like that?
Thanks Rob.

Hi Rob
I presume you use XI 2.0.
Execute transaction sm12 to release the locks.
Regards
Venu

How to run Integration Repository Designer

Hello,
I have installed NetWeaver 2004S SR2 ABAP+Java, Windows 2003 32-bit with MS SQL Server 2005. Did not install anything beyond that.
The goal for me is to create the connectivity between our own application and SAP NW with use of PI module.
Now, I'm trying to follow step-by-step guide "Step-By-Step Approach for Implementing XI" Scenarios(SAP on DB2 for Linux, UNIX, and Windows) and at certain point they ask to open the Integration Repository Designer, which I cannot find on my system.
Questions:
1. Do I need to install anything beyond already installed components to get access to PI/XI design and runtime tools?
2. If not, how can I run this Integration Repository Designer?
Thanks,
Maxim.

After running the transaction mentioned, I just get the Windows Explorer popped up with the folder "C:\Documents and Settings\Sap\SapWorkDir"
Those are the files in this folder:
SAP_Cache_Sap\
SAPHistorySAP.mdb
SAPHistorySAP.ldb
sapfewdll_01_0007_00_692_1716.err.trc
errorlog.gui
No errors or any other messages in the SAP System window. Any suggestions?
Maybe I'm not good at terminology, but saying "...while installing XI/PI..." did you mean I need to install that separately from the installation I ran from the SAP Solution Manager disc, providing NW Kernel 7.0 as a part of that installation?
Thanks,
Maxim.

How to handle Release transfer for Configuration objects in PI 7.1?

Hello Experts,
In my current project we are working on Release1 production bug fixing (JDBC to IDoc interface) and parallely on release2 enhancement (field addition, mapping changes) for the same object.
I have used release transfer to copy IR objects (mapping, etc) from SWCV 1.0 to SWCV 2.0 and started making Rel2 mapping changes in SWCV 2.0 IR objects. But, am not able to create the ID objects (receiver determination, interface determination, etc) for Rel2 SWCV objects. Even though I select interface from SWCV 2.0, it says object already exists.
Please suggest.
Thanks,
Raks.

Hi,
AFAIK ,SWC is not a part of the Key in identifying the receiver determination in the PI 7.1 also....
which means that no need to create the ID objects again...as said for the changes (sender channel and inbound interface structure...) only change will be in the ESR interface structure.. which will be used by the ID...provided the same namespace is used for the changed message type also....
Hope this clears you
Rajesh

I have to transfer volume licensing CS6 design and web premium, but I don't know what is the right module. I've found many, all different...thanks

I have to transfer volume licensing CS6 design and web premium (between 2 End Users) but I don't know what is the right module. I found some, in Adobe's website, but all different...
One module for transferor
One module for recipient
One module for both parts
I filled the forms, I signed them , I called the assistance for case number and they've sent me another module:
one module for both of parts, without field for to insert serial number...
What have I do? Which module must I use? I'm becoming histeric!
Thanks to all for help
Letizia

Volume Licensing
http://helpx.adobe.com/x-productkb/policy-pricing/volume-licensing-site.html

Problem with release-transfer

Hi,
I have created a new softwarecomponent version and I've tried I release-transfer.
It worked fine but in the old softwarecomponent version there where "imported objects" (IDocs) and these IDocs are not in the new softwarecomponent version.
Does anybody know how to get these Idocs into new softwarecomponent version?
Thanks.
Regards
Stefan

Hi.
In your new softwarecomponent, you need to click the tap:
Import of RFC and IDoc Interfaces from SAP system permitted.
Its located under the software component itself!
You need to fill out System, Client, Message Server and Group.
Regards Peter

Hi! I just purchased a new computer and would like to transfer my Adobe5.5 Design Standard products from my old computer to the new one, but am unsure how.

Hi! I just purchased a new computer and would like to transfer my Adobe5.5 Design Standard products from my old computer to the new one, but am unsure how. When I called Tech Support, they suggested forum because this is such an old product. Is it best if I just purchase the new product? Do I have to do anything else?
Thanks for ANY help!

as long as you have your serial number, you can install on your new computer.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Release transfer

Hi guys,
I understand that release transfer is used to move objects from one SWC version to another .
I am having a new SWCV SRM server 7.0 ( PI content ) and a older swcv POscenarios ( having custom mappings using objects in SRM server 3.0 )
In my case i am using release transfer to copy object from a new software component version to an older version of the same software component, for example to make a correction available in an older version.
However I am concerned about the custom mappings in the SWCV POscenarios because if the structure of message type changes the mapping will go away.
Is there any way to do this such that the mapping does not get affected.

What Michal said is the easiest way, but if you Basis team wants more details then just do this....
To find out exactly with Role you're missing just use transaction su53. It will display User Authorization info. You'll see where it says "You are not authorized to...." Someone from you Basis team should be able to find out which Role has the missing object. Then they would just add you to the Role. This is assuming you have access to su53.
- Emmett

Error in release transfer

Hi,
When i do a release transfer i get a Error message "Object Message Mapping MM_aa | http://bb cannot be imported into software component version TARGET, 1.0 of target because it's namespace is not permitted there Define the relevant namespaces in the target version before executing the release transfer"
I tried having the same Namespaces in both the SWCVs but dint work (It threw a warning ofcurse that the namespace is same)...
Any clues??

hey pavan bhai
release transfer should work by steps what have you followed only requirement is to have create the similar namespace in the target software component first and then do the release transfer.
one thing jsut try unchecking the target SWCV (original objects option at down it should work then)
how is life there?
reards
Nisar

Force Integration Builder (Design and Configuration) language to be English

Hi Experts!
Does anyone know how to force the Integration Builder (Design and Configuration) language to be English? Since SSO is configured the logon screen do not appear and users can not choose the language they want. The problem is that the default language is German instead of English.
Thanks in advance.
Roger Allué i Vall

Hi,
I've changed these parameters in the ExchangeProfile:
com.sap.aii.directory.serviceuser.language
com.sap.aii.integrationserver.serviceuser.language
com.sap.aii.ib.client.login.languages
com.sap.aii.ib.client.content.languages
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.rwb.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.docu.languages
com.sap.aii.repository.serviceuser.language
Now all they have the value EN. I also restarted the applications (Server --> Services --> Deploy) :
sap.com/com.sap.aii.af.app
sap.com/com.sap.aii.af.cpa.app
However, nothing changed. Maybe I have to restart all the J2EE Engine?
Thanks in advance.
Roger Allué i Vall

Release transfer in Integration Bulder: design

Similar Messages

Maybe you are looking for