Relicate Datasources from ECC to BW

Hi,
I ran into a issue while using newest version of BW system. In old version, i did not have to choose such as image below when i relicated my datasources.
When dialog box appeared, i have chose as above, but, i could not create infoPackage for my infoCube.
Please help with this issue.
Regards,
Hoang

Hi,
In r/3 go to the RSA3 and give the ur data source name and execute it it shows how many records are there then in b/ when u r extracting the monitar tab u can see how many records are extracted.if u want detailed level that object /bic/pxxxx (xxx= object name) will give the attiribute table /bic/txxx will give the text table and likethat /bic/fxxxx(xxxxx= cube name) for transaction data for cube loading.
Thanks & Regards
sathish

Similar Messages

Steps to enhance a datasource from SAP CRM

Dear Forum,
Could you please provide me with some document to enhance a datasource from SAP CRM. Is it any different from enhancement of datasource from ECC datasources,
Thanks and regards,

Hi,
please look this:
Business Intelligence How-to Guides for SAP NetWeaver 2004 [original link is broken]
or here: How-to Guides for SAP NetWeaver Business Warehouse 7.0 [original link is broken]
Creating a datasource for generic extraction
regards
CSM Reddy

Transporting DataSources in (ECC) problem

Hi SCN,
Just wanted to ask if these are only the two important nodes when collecting and transporting an enhanced datasource?
I am currently transporting datasources from ECC DEV to ECC QAS. When reviewing my datasources in QAS, append structures were not transported.
- What I did here was to transport datasources from RSA6. I though it would carry all the changes made in the datasource but it was just the active datasources.
So I collected the datasources again in a new TR; collecting the requests only in one TR (as per discussions in SCN). First is re-activating the append structure; putting it in a new TR, then collecting the active datasource.
I am just having doubts if I am missing a step since the (Go To -> Object Directory Entry) is not letting me make a new transport inside the extract structure (double clicking the datasource; double clicking the extract structure; then object directory entry), thus, I am not able to collect the standard extract structure table (or is this because the datasource I am transporting is a standard one?).
Thanks in advance for any assistance you can provide.
Thanks.

I always thought that I need to collect it in one TR (Active datasource, Extract Structure and Table Structures). But, it was okay to have the append structure in another TR.
What I did was to transport the DataSource then followed by the append structure's TR. It's all good now.

Unable to extract the data from ECC 6.0 to PSA

Hello,
I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
When i try to load Full Load into PSA , I'm getting following error message
Error Message: "DataSource 2LIS_11_VAHDR must be activated"
Actually the data source already active , I look at the datasource using T-code LBWE it is active.
In BI on datasource(2LIS_11_VAHDR) when i right click selected "Manage" system is giving throughing below error message
"Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
If anybody faced this error message please advise what i'm doing wrong?
Advance thanks

ECC 6.0 side
Delete the setup tables
Fill the data into setup tables
Schedule the job
I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
BI7.0(Service Pack 15)
Replicate the datasource in Production in Backgroud
Migrate Datasource 3.5 to 7.0 in Development
I did't migrate 3.5 to 7.0 in Production it's not allowing
When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
Thanks

Problem loading material master (IS Mill) data from ECC to BI

Hi Gurus,
We have a problem loading Material master data from ECC to BI 7.0 SP 18.
The scenario is :
The ECC is with IS Mill... due to which the Material field MATNR is of length 40 instead of standard 18 characters.
That is data element MATNR has 18 chars and its output length is 40 chars.
When is table MARA browsed using SE16, the material with more than 18 chars.... shows only first 18 characters and are ended with !.
OMSL setting shows length as 40.
When the extractor checker runs 0MATERIAL_TEXT or 0MATERIAL_ATTR it gives correct output ..... which is more than 18 characters... not ended with !
Till here no problem.
On BI side, after replication of the datasource, i checked data element MATNR ... but it has length as 18 chars and output length as 18 chars.
OMSL setting cannot be set more than 18.
Infopackage has pulled data till PSA successfully. I checked the PSA data .... here to the material with more than 18 chars is ended with !.
When the data is further pushed to 0MATERIAL infoobject, it throws following error for all materials irrespetive of its length (example below):
0MATERIAL : Data record 768 ('SIT_PL_B01L_10_01!E '): Version 'SIT_PL_B01L_10_01! ' is not valid
0MATERIAL : Data record 165 ('RLIRS52 E '): Version 'RLIRS52 ' is not valid
Diagnosis
Data record 768 & with the key 'SIT_PL_B01L_10_01!E &' is invalid in value 'SIT_PL_B01L_10_01! &' of the attribute/characteristic 0MATERIAL.
System Response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
I did search for SAP note related to this... but could not find any.
There is one SAP note (Note 960868) which mentions about this, but the correction was then shipped with BI SP 9.... we are running on SP 18.
Requesting you all experts for help.
Best Regards,
Deepak

Hi,
follow bellow steps:
1. you need to activate the Datasouce in BI side.
Goto RSA1> Datasource> Select Datasource> Double click> Check fileds and Activate.
2. Replicate the Datasource into BI side.
3. Check the RFC connections by useing SM59.
Regards.

Pulling of Exchange Rate data from ECC to BI

Hi All,
we are having an requirement to pull TCURR Table Exchange Rate data from ECC to BI.
If anybody worked on this scenario could you please share valuable inputs regarding this.
I gone through this SDN forum link: Re: Automated Exchange Rate Loading in BPC NW ( please share some more details regarding this )
Regards
Amit

Hi All,
I hope this will help you to pull Exchange rate data from ECC Table : TCURR to SAP BI System.
ECC Steps : Creation of generic datasource
1) Create generic Transaction Data source Using TCode : RSO2 with name ZTCURR and then press create Button.
2) Input Applic. Component: FI-GL and give description.
3) Input View/Table: TCURR and Press save Button.
4) This will take you to extract structure of data source ZTCURR. In this structure select respective field from the selection field option (In future we will use it in BI info package) and then press save button.
5) Use Tcode: RSA3 to check the data by giving custom data source ZTCURR name.
Note:In this case we are extracting full data from TCURR table. If your project demands you can use delta specific field.
SAP BI 7 Steps
1) Go to BI system, TCode: RSA1--> Source System-> Replicate metadata, then you can see generic data source "ZTCURR" in your BI data source tree.
2) Maintain Info cube Structure same like table : TCURR,
ECC Field      ECC DATA TYPE                               BI Field     BI Data Type
KURST     CHAR                          -
>                 ZKURST     CHAR (Length 4)
FCURR     CUKY                          -
>          ZFCURR     CHAR (Length 5)
TCURR     CUKY                          -
>          ZTCURR     CHAR (Length 5)
GDATU     CHAR                          -
>          ZGDAT      CHAR (Length 8)
UKURS     DEC                             -
>          ZUKURS     NUMBER ( Key Figure )
FFACT     DEC                             -
>          ZFFACT     NUMBER ( Key Figure )
TFACT     DEC                             -
>          ZTFACT     NUMBER ( Key Figure )
=========================================================================================
3) Conversion of default format "YYYY/MM/DD" to "YYYYMMDD".
In Transformation: "GDATU" is number format, not date format, so we need to write start routine in transformation.
With the Help of below code you can convert default format
"YYYY/MM/DD" to "YYYYMMDD".
DATA: DATE      TYPE CHAR10,
          L_INDEX   TYPE SY-INDEX.
LOOP AT SOURCE_PACKAGE ASSIGNING <SOURCE_FIELDS>.
    L_INDEX = SY-TABIX.
    CALL FUNCTION 'CONVERSION_EXIT_INVDT_OUTPUT'
      EXPORTING
        INPUT = <SOURCE_FIELDS>-GDATU
      IMPORTING
        OUTPUT = DATE.
    CONCATENATE DATE+6(4)
                DATE+3(2)
                DATE+0(2)
    INTO <SOURCE_FIELDS>-GDATU.
    MODIFY SOURCE_PACKAGE FROM <SOURCE_FIELDS> INDEX L_INDEX TRANSPORTING GDATU.
ENDLOOP.
Note : Customize above ABAP code according to your client requirement.
==============================================================================================
4) Calculation of Month End Rate----> Means last working day of month
Please refer below solution ( sent on 3rd June 2011 ) to calculate Month Rate
Go to BI transformation and write formula in ZGDAT field. In this case add GDATU as source field of rule and write below formula.
*Last working day of month Formula *    :             LAST_WORKINGDAY_MONTH( GDATU, '' )
Last working day is calculated based on the data maintained in the ECC TCODE : SCAL ( SAP Calendar )
==============================================================================================
5) CALMONTH calculation: conversion of YYYYDDMM format   to YYYYMM format.
This below given ABAP code helps you to convert GADTU: YYYYDDMM format   to CALMONTH : YYYYMM format.
In BI transformation write field routine in CALMONTH field to display date in this YYYYMM format.
DATA : L_GDATU TYPE tys_SC_1-GDATU.
CLEAR L_GDATU.
CONCATENATE SOURCE_FIELDS-GDATU0(4) SOURCE_FIELDS-GDATU4(2)
            INTO L_GDATU.
RESULT = L_GDATU.
Regards
Amit
Edited by: amit_sap_n on Jul 20, 2011 1:54 PM

Data Loading into Infocube from ECC.

Hi,
Can someone help me with the list of steps to be followed for loading data into infocube using Data trasnformation process. Steps to be perfomed in the system.
Also please share any links on various methods of loading data into infocube from ECC.
Thanks!

The steps would be *** foloows:-
1) Create the info-objects.
2) Create the infocube. If you a Planning area and the cube is a replica of the PA you can use /SAPAPO/TS_PAREA_TO_ICUBE to create the infocube.
3) You create a source system as a file system.
4) You create the datasource with the relevant fields.
5) You create a transformation for the cube using the datasource you created in step 4.
6) Last step would be to create DTP. When you create the DTP, on the first screen, check the checkbox for "Do not load data from PSA". This will give you additional fields to enter the file path. When this DTP is created and generated, goto the last tab of the DTP to execute.
This will help you to directly pull the data from the file and load it into the cube.
You can also create a Process chain to automate this process.
Hope this helps.
Let me know in case of any more information.

How to debug extraction a datasource in ecc starting execution in bw ?

HI gurus,
how to debug extraction a datasource in ecc starting execution in bw ?
Thanks.

Hi,
In your issue i thick data source trace in BW is not possible but RFC is the main criteria here if it is correct data will comes to the bw automatically when ever info package triggers.
If you need to check the data source data in trace mode and it is not coming properly, then we need to check from RSA3 by executing with debug mode check box option.
Still need any clarification let me know.
Thanks & Regards,
Srinu.Rapolu

0PM_CATIND & 0PM_PLANIND where is text datasource in ecc,0PM_OPER install

dear friend,
I have 0PM_CATIND - Maint.Orders Category Indicator and 0PM_PLANIND - Maint.Orders Planning Indicator in BI, where to find its text datasource in ECC, i havent found in ECC rsa5, is such text datasource required to create?
2) I have 0PM_OPER - Operation Number for PM is new master Infoobject in PM where Maintanance order is compound,
I have install it but it installed only with infoobject not any attribute or trasferrule or updaterule, Is it required to do manually mapped with any datasource? or required to copy its attribute from other master infoobject attribute?
if anybody have workerd already on this Info object.
Thanks
Dushyant.

could you explain how help.sap was of help? and also, what is the name of the extracter is RSA5 that you linked them to?
thanks for you help. i am having the same issue.

How to fetch the data from Ecc to BI ?

Hi everybody.
Can anyone briefly explain with the screen shots > How to fetch the datasource from RSA5 tcode in ECC to BI? How you replicate there? how the INFO PACKAGE , TRANSFORMATIONS, DTP , DSO, INFO CUBE was created? where we see the catalogs for this data.......THANKS IN ADVANCE

Hi.
You can follow the below steps to fetch the data from ECC to BI System.
1>Connection should be there between ECC and BW System.
2>Go to Tcode-RSA5 in ECC system and find your data source and then activate it.
3> Go to Tcode-RSA6 in ECC system to check whether your DS is available..if it is there then its been activated.
4>Go to Extract Checker tcode RSA3 and test the data and make sure data is correct.
5>login to BW Side..go to tcode RSA1-->Choose your source system. ECC -> double click on it and you will move to Data source>Select your Application component ex, SD,FI ...>Right click and replicate the Datasouce> Now on refresh you can see the datasource in BI System.
6>Install the related the Infoprovider .. cube or dso ..Connect the datasouurce and create Transformation.
7> Now create infopackage and run it in ful & init mode then do the delta for the new records.
Please refer the below link for more details on extraction.
http://www.trinay.com/SAP%20BW%20Extraction.pdf
Hope this helps.
Br.
Alok

Problem to initialize delta queue of datasource from CRM 7.0.

Hi all,
I've some problem to initialize delta queue of datasource from CRM 7.0. After initialize the Init in BW, the delta queue was created but after the user changed data, this changed didn't populated into delta queue.
I tried the steps below but without any success. Anybody know how can I correct this issue?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate
the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate
these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
4.a)If required activate the datasource
Go to transaction BWA5 > select the required datasource and
activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
5. In BW system
Go to transaction RSA1 > modeling > infosources > select the
infosource > right mouse click on the selected
infosource > choose option replicate datasource
Activate the infosource.
6. Go to the scheduler for the infosource > select delta in the
update >choose the option PSA only (in the Processing tab)

Hi Peter,
Thank you for your answer.
But we need to find out what the reason for this import error is.
Our customer will not be very pleased to see that all IDocs from CRM system cannot be found in the IDOC folder.
IDX2 import of metadata is no issue.
We were successful for standard and customer Idocs here.
Additional information:
We are already importing Idocs from a SAP ECC 6.0 system into PI in another SWCV
successfully. So this is a CRM system specific issue in our environment.
Regards
Dirk
Edited by: Meinhard Dirk on Aug 27, 2010 10:30 AM

Modifying Hierarchy Node name in Query or during download from ECC

We have some hierarchies that we download from ECC into BI and use them in query to display as report for Income statement or Balance Sheet statements. The issue we want to resolve is when we download the hierarchy from ECC into the intermediate download process tags hierarchy name as prefix for the node name. So for example if the hierarchy in ECC is as below
ABC (name)
1000 (node name)
2000 (node name)
When its downloaded in BW it looks as below
ABC
ABC1000
ABC2000
We want to see hierarchy in BW same as ECC. I tried removing the prefix in the query with no success.
Since the table RSTHIERNODE has the prefixed also as node name so that's how it will be displayed.
I thought I will modify the download process (datasource) to remove the prefix but the delivered user exit EXIT_SAPLRSAP_004 get executed prior to select of the data.
Has anyone got any other suggestions?
Thanks for your time.
Edited by: SK on Oct 28, 2008 2:19 PM

Ravi,
Just checking. Did you create a authorization variable and added it in the query for that characteristic?
Gova

Reagarding Master Data loading from ECC

Hi i want to activate Master Data for Customer and Material from ECC ,Can any one give me the clear steps ,and also i want to know what is the source for these Material And Customer in ECC.

Hi
The datasources are 0CUSTOMER_ATTR and 0MATERIAL_ATTR you can find these in RSA6 if activated under SAP-R/3->LO->LO-IO.
Assign these to 0CUSTOMER and 0MATERIAL infoobjects in BW for a direct update or you can use the following infosources for flexible update
0CUSTOMER_ATTR
0MATERIAL_ATTR
Also use texts datasources 0CUSTOMER_TEXT & 0MATERIAL_TEXT
If the above mentioned datasources are not activated (NOT VISIBLE IN RSA6), use RSA5 transaction code to activate them.
Hope you are familiar with BW and good luck
Regards

Hierchy from ecc system

hi
i want bring hierchy from ecc
0FUND_0111_HIER
, i activated at rsa5? now i replicated? now my question is at info package . hierchy selection 3 hierchys are there?
so for each hierchy, i need to create 1 info package?
please let me know

Hi,
Explain the steps to load master data hierarchies from R/3 system.
A summary of the steps are as follows:
1) Goto Hierachy tab in infobject on to which your loading Hierachy data.
2) Select With Hierarchies.
3) Select Hierarchy Properties ( Time Dependent or not time depen..etc..)
4) Click on External Chars in Hierarchies, in that select the characterstics on which this Hierarchy is depending.
5) Then Create Infosource, assign Datasource.
6) Create Infopackage, to load Hierarchies.
7) Hierarchy section tab in Infoapackage select load Hierarchy and refersh the Available Hierarchies from OLTP, If it is Time dependent select time interval in update tab.
8) Then start the load.
If you want to load from Flat file, some what different way to do it.
It is normally done by the following:
Transferring the master datasources in RSA5 to RSA6 and then replicating the DS into BW and assignment of DS to Infosource and cretaion of Infopackage and load it into the master tables.
Generally, the control parameters for data transfer from a source system are maintained in extractor customizing. In extractor customizing, you can access the corresponding source system in the source system tree of the SAP BW Administrator Workbench by using the context menu.
To display or change the settings for data transfer at source system level, choose Business Information Warehouse --> General Settings --> Maintaining Control Parameters for Data Transfer.
Note: The values for the data transfer are not hard limitations. It depends on the DataSource if these limits can be followed.
In the SAP BW Scheduler, you can determine the control parameters for data transfer for individual DataSources. You can determine the size of the data packet, the number of parallel processes for data transfer and the frequency with which the status IDocs are sent, for every possible update method for a DataSource.
To do so, choose Scheduler --> DataSource --> Default Settings for Data transfer.
In this way you can, for example, update transaction data in larger data packets in the PSA. If you want to update master data in dialog mode, smaller packets ensure faster processing.
Some of the links :
Tab Page: Hierarchy Selection (SAP Librry - Process Management)
http://help.sap.com/saphelp_nw04/helpdata/n/09/0a8b 3ba19dfe47e10000000a11402f/frameset.htm
Time-Dependent Hierarchies (SAP Library- BI Platform)
http://help.sap.com/saphelp_nw04/helpdata/n/80/1a67 02e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/Helpdata/EN/0e/fd4e3c97f6bb3ee10000000a114084/content.htm
http://books.google.co.in/books?id=3wBjrMDWescC&pg=PA64&lpg=PA64&dq=SAPBWhierachies&source=bl&ots=RIpR0lnCcr&sig=_2hFNkuhcklrL7dKEWy3HLxMP6k&hl=en&sa=X&oi=book_result&resnum=5&ct=result#PPA64,M1
Page no: 64 - 67
Hope it helps you
Thanks
Hema

Export datasource from Cube - PSA shows no data

Hi All,
I need to create an export Datasource from cube.
I right clicked on the cube-> Additional functions-> Export DS and the DS was created.
But when I check the PSA, I see no requests.
But in case of a DSO, we can see all the requests in DSO as requests in the corresponding export Datasource PSA as well.
What am I missing out in case of a cube. Why is there no data in the PSA?
Please advice.
Thanks,
Shyam

Hi,
But when you make the cube as data source for APO target, PSA won't be exist. PSA is only at first level, it holds source data , i.e ECC Data.
after making export data source, you make connections/transfer rules whatver related APD terms, make it and try to load and see the data is coming right formate or not.
Thanks

Relicate Datasources from ECC to BW

Similar Messages

Maybe you are looking for