Reloading iWeb Domain from Backup Domain - Not working

My iMac hardrive crashed and died. We re-installed a new drive. We reloaded the old website back into the Applications Support folder for iWeb. But, every time we re-boot the iWeb keeps starting up with a new page. We then double click on the original icon and every thing is fine until we reboot again and again iWeb keeps defaulting to a new page and when we reload the original website all the newly added changes are no longer there and we have to start all over again.
Is there a fix to this?
JKai

Yes, it is the original iWeb site we built from within iWeb. Here is another problem that is occurring. When you open the website from Safari the new changes are there. But when you reboot the computer the iWeb site reverts back to the older version where the changes we just made is no longer there.. but in Safari the NEW changes are there. Somehow the iWeb site we are working on keeps reverting back.
I will make the changes again but this time I will be sure to copy the iWeb site from the "Applications Support" folder and replace it with the version iWeb keeps reverting to - to see if that will work.
I will post my results some time today when I have time. Thank you and hope stay in touch to help me with the results.

Similar Messages

  • Play a song from itunes? it will show the art work then skip three or four songs and start playing! How can I get it to play the songs I touch? This is a new phone but has been restored from backup. Not even all my icloud music is showing

    play a song from itunes? it will show the art work then skip three or four songs and start playing! How can I get it to play the songs I touch? This is a new phone but has been restored from backup. Not even all my icloud music is showing

    Hi amorg1876,
    If your iPhone is skipping over certain songs, you may want to check out this article:
    Troubleshooting songs that skip
    http://support.apple.com/kb/TS3217
    Cheers!
    - Ari

  • PSE8 Backup/Synchronization not working for more than a month

    1. Reconnecting files shows that a file is not connected; however, no file is listed. How do I find missing file's properties.
    2. Backup/synchronization preferences works fine.
    3. I can select one or more or the whole catalog.
    4. The twirly icons show next to the album(s) for a second or show but then the synced icon remains in album/albums.
    5. I click OK and after the hour glass shows a while, it finishes.
    6. I click on icon and see that sychronization is on.
    7. If I check (unsynced items, synced items, or items marked for sync) it shows nothing and says that none of those choices matches.
    8. I have repaired and reindexed countless times (never has there been a "repair" problem.
    9. I click on optimize and that works.
    10. After that I notice "generating thumb nails" and the twirly thing moving. I've let it generate thumbnails for more than 24 hours and it's still going.
    I have spent countles hours during day and night, and I can't get it to work.
    I noticed that someone wrote that he had a similar problem that began with his using the IPAD. And I started using the IPAD also, but I couldn't sync my files with photoshop.com before that.
    Customer service and Help provides me with no answers. What should I do?

    Hi clairenanak:
    Sorry to hear about the troubles.
    On your #1, you may have disconnected files of media types that are not visible. To ensure that all media types are visible, go to View > Media Types, and check any items that are not currently checked. Then try the Reconnect.
    As far as backup/sync not working, disconnected files can stop sync from working.
    After resolving the disconnected files issue, let us know if sync is not working. We may need to look at the sync log to determine why.
    As for the Organizer constantly generating thumbnails, this could indicated that you have many files, for example 10,000, in your catalog.
    If you have many files in your catalog, then you may need to just wait for the process to finish.
    It may also indicate a problem with the thumbnail cache that can't be repaired by the Optimize command.
    You can manually reset this file by doing the following:
    Determine the name of your Elements Organizer catalog.
    The name of the catalog appears in the lower-left of the Organizer.
        Alternatively, you can open the Organizer and then click File >  Catalog. The name of the catalog will show in the list at the bottom  with " [current]" after it.
    Close the Elements Organizer.
    Navigate in Windows Explorer to the folder that contains your catalog. Here are the default locations:
       Windows 7 or Vista: C:\ProgramData\Adobe\Elements Organizer\Catalogs\<CATALOG NAME>  
    Click Start, type "%ProgramData%" (including the quotation marks) into the Start Search, and then press Enter.
    Open each folder in the above structure until you have opened the catalog folder.
       Windows XP: C:\Documents and Settings\All Users\Application Data\Adobe\Elements Organizer\Catalogs\<CATALOG NAME>  
    Choose Start > Run, type "%AllUsersProfile%\Application Data" (including the quotation marks) in the Open text box, then press Enter or click OK.
    Open each folder in the above structure until you have opened the catalog folder.
       NOTE: Replace <CATALOG NAME> with the name of the catalog that you determined in Step 1 above.
    There should be a file called thumb.5.cache, which is the thumbnail cache. Delete this file.
    The next time you open the Elements Organizer, the thumbnail cache will begin to rebuild. This may take some time, depending on the number of files you have in the catalog.
    HTH

  • Exchange 2010 "event id 403/401 The physical consistency check" Backups does not work...Critical!!

    Hi,
    At this moment our backups does not work. We have two error on the event viewer;
    Exchange 2010 sp3 version 14.03.0158.001
    We have only one server Exchange 2010 with two databases for users...
    Event id 401;
    Instance 1: The physical consistency check has completed, but one or more errors were detected. The consistency check has terminated with error code of -106 (0xffffff96).
    Event id 403;
    Instance 1: The physical consistency check successfully validated 629126 out of 1110272 pages of database '\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy33\exchangedb\global\global.edb'. Because some database pages were either not validated or failed validation,
    the consistency check has been considered unsuccessful.

    Hi Javier,
    From your error description, I recommend you do the following steps for troubleshooting:
    1. Please run CHKDSK and restart server.
    2. Run a Database level Mailbox repair request.
    What's more, here are some useful threads for your reference.
    Create a Mailbox Repair Request
    http://technet.microsoft.com/en-us/library/ff625221(v=exchg.141).aspx
    Database Backup Failing with Event ID 2007, 9782, 401, 403, 254
    http://social.technet.microsoft.com/Forums/en-US/4c8eccbf-435a-43ef-b3f6-0de5096413ee/database-backup-failing-with-event-id-2007-9782-401-403-254?forum=exchangesvravailabilityandisasterrecoverylegacy
    Hope it helps.
    If you need further assistance, please feel free to let me know.
    Best regards,
    Amy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Consuming PI Webservice from Webdynpro Java Not working

    Hello SAP,
    Environment: CE 7.2.
    Resolution expected immediately, Helpful answer is highly appreciated.
    Is the namespace should not exceed 60char for PI Webservice, for executing the webservice from Webdynpro Java.
    I tried with all the options in executing the PI Service from Webdynpro Java, None of the options worked. I am facing the below error while I was calling the PI Webservice.
    I don't see any problem from Webdynpro Java, what ever the procedure I have followed is the standard procedure.
    Fortunately when I execute the service from Webservice Navigator, it is working as expected. The same webservice when I consume it from Webdynpro Java it is not working
    Options tried so far:
    1) Published the Services to Service Registry and there by consuming the PI Service from Service Registry - Not worked
    2) Tweaked the URL with few options - Not worked (Tweaking the URL, ex: portType, Binding)
    3) Changing the Business Systems in PI and there after calling the service - Not worked
    4) Initializing the code, instead of creating Service Controller and calling the PI Service - Not worked.
    5) Created a Provider System and tried to call the PI Webservice from Provider System - Not Worked
    For all the Options, I am facing the same error which is provided in the screenshot.
    Below procedure which I have followed for calling the PI Webservice:
    1) Created Adaptive Webservice Model
    2) Provided PI Webservice URL (It prompts for PI System UserId and Password)
    3) Selected Option - No Service Group Configuration
    4) Provided Logical Destination
    6) Completed creation of Model
    7) Added the model as a UsedModel
    8) Right Click on Comp Contr. and selected Apply Template and Created a ServiceController for the model (Entire mapping to comp contr, Initializing the nodes is taken care by Service Contr.)
    9) Created an Template Action button and there by calling execute method which is auto rendered from CompContr..
    10) Build the project.
    11) Activated the code and Run the Application.
    12) Getting the below error which is showed in the message.
    ERROR MESSAGE:
    Exception on execution of web service on destination 'GetPIHRPeopleData' for operation 'SI_CreateHRPeopleData_OS' in interface 'SI_CreatePeopleCompany_OS'

    Hi Sankar,
    If the webservice is working fine in the Wsnavigator then there is some problem with importing the webservice in webdynpro for Java. Please check the required parameter for creating the Adaptive Webservice Model. After adding in the used model and compoent controller binding, you need to write code for to execute the webservice model.
    Please check the code for initialization and execution for the webservice and then test it.
    Best Regards,
    Arun Jaiswal

  • Select * from tab is not working in oracle 10g

    select * from tab is not working in oracle 10g. But at the same time,
    select * from <<table>> is working.
    Please advise me.

    This works for me in 10.2.0.2
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    SQL> select * from tab;
    TNAME                          TABTYPE            CLUSTERID
    LOAN_DETAIL                    TABLE
    PLAN_TABLE                     TABLE
    ...

  • When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

    When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

    If you see a red light in the audio output port, then the internal switch is stuck.  Insert the earphone plug a few times and see if you can trip the switch.  If that fails, insert a cocktail stirrer and the like and jiggle it around inside.  If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
    Ciao.

  • Icloud backup does not work after installing ios7

    I installed ios7 and now my icloud backup does not work. When I connect to iTunes i can back up my phone on my computer, but when I change the option to icloud it gives me an error message. Please help

    Please, provide some details. May be some configuration is reseted, password? What error do You see?

  • Can i pick and choose what to restore from backup or not

    if i restore a backup from itunes on to my ipod will i lose the stuff thats on the ipod now thats NOT in the back up!!! can i pick and choose what to restore from backup or not?

    but will it erase the stuff thats on the ipod now thats not on the backup????

  • TS3992 iCloud backup is not working iPhone 4S

    Hi,
    My iCloud backup is not working on my iPhone 4S. I was took backup on november 2012 after that I did not connected with wifi and i did not take any back. Now I try to take a backup using wifi it is not working can any help me to fi this issue.
    Thanks & Regards
    Sal

    Any one having a problem with iCloud BackUp ?
    Here is the solution..(works with iPhone, iPod, iPad)
    1) Please export all your contacts by signing on iCloud.com
    1.1) Go to https://www.icloud.com/ and sign in with your Apple ID
    1.2) Go to contacts and click on the settings icon on the bottom left of the page which is also called as the Show   Actions menu. And then click on Export vCard.
    1.3) Your file is saved on desktop or any location that you choose to save at.
    2) On your device, go to the settings menu - General - Reset - Erase All Content and Settings
    3) Allow the device to restore and turn into a new device.
    4) Sign in with iCloud account on your device and turn on backup after you restore all the data you need on your device.
    Try Backing it once you have completed all the above steps. iCloud backup works !!

  • Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

    I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

    if there's a problem with the number of installations, you'll see a message about an excess activation problem.
    if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
    otherwise, attach a screenshot of the error message or quote it.

  • Get-MailboxSentItemsConfiguration Set-MailboxSentItemsConfiguration From Only (still) not working

    Hello,
    I would like to ask a question, hopeing it is resolved in some way and i missed it.
    I have installed SP3 Rollup 4 on our Exchange 2010 server.
    This added 2 new Powershell commands
    Get-MailboxSentItemsConfiguration
    Set-MailboxSentItemsConfiguration
    This can be used to manipulate where mail is stored in the send items.
    Sender - e-mails sent using SendAs or Send-on-Behalf-of permissions are saved only in the Sent Items folder of the Sender (UserA);
    SenderAndFrom – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of the Sender and the mailbox on which the permissions are assigned (in our example, both UserA and UserB);
    From – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of only the mailbox on which the permissions are assigned (in our example, UserB)
    What we really want it to use the From only way.
    We use a shared team mailbox and use that as primary, as a second mailbox users get a trusted non shared mailbox. Mail sent from the trusted mailbox should only be in the send items from the actual sender, not both.
    2 sites report that the From field is reserved for Future Use, or bugged and does not work is intened.
    Here is is stated on 1 July 2013
    http://technet.microsoft.com/en-us/library/jj884078(v=exchg.141).aspx
    From Reserved for future use. To save the messages sent as this mailbox in the Sent Items folder of this mailbox, use SenderAndFrom value.
    That was on 26 March 2013
    http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2010/OutlookOWA/sent-items-behavior-shared-mailboxes-update.html
    NOTE 1: the From value does not work as expected... It basically performs the same action as the SenderAndFromvalue, meaning it saves the e-mail in both mailboxes. This is still the case in Rollup 5 v2.
    We are on 3 March 2014 now, is this still bugged, did i miss something, or is there an ETA when this will be fixed ?
    Looking foward to any replies.
    Kind regards,
    Jeroen van Velzen

    I am using a shared mailbox (with a disabled account) where I get sent items and also deleted items placed in the right folders.
    I think it’s just a matter of how you configure Outlook. It works well for me in both Outlook 2010 and Outlook 2013, cached mode and also online mode. You can add a shared mailbox to your Outlook profile in at least two ways where one of them doesn’t work
    but the other does.
    If you add the shared mailbox via the File tab/Account settings/New/ and just enter the e-mail address of the shared mailbox in the Auto Account Setup page. No name, no password, just the e-mail address and click Next and voila “Your e-mail account is successfully
    configured”. After restarting Outlook you will find the shared mailbox below your own in the left pane.
    If you click the inbox ones in the shared mailbox and then open a new mail you will see the shared mailbox display name in the From field. After sending the mail you will see the mail in the Sent Items folder of the shared mailbox. If you delete a mail in
    the shared mailbox you will see it in Deleted items folder of the shared mailbox.
    The prerequisits for this is that you have “full access” and “send as” rights of the shared mailbox.
    This was accomplished without using the Set-MailboxSentItemsConfiguration command.
    We are running Exchange 2010 SP3 RU4.

  • My iPhone has been badly damaged and I cannot get the screen to work. I want to do a backup to transfer to my new phone but the backup will not work because the phone is locked. Can I input my lock code to the phone via the computer to allow a backup?

    My iPhone has been badly damaged and I cannot get the screen to work. I want to do a backup to transfer to my new phone but the backup will not work because the phone is locked. Can I input my lock code to the phone via the computer to allow a backup?

    Sorry, no.

  • Domain Controller System State backup script *not working*

    Hello I am trying to get an automated backup for my domain controller to a network share using a script and windows task scheduler - our domain controller is windows server 2008r2
    this is the code for the script i have written as seen below, however when i run the scrip it does create the folder on the network share but fails to initiate the system state backup power shell returns this error when i run the script.
    any suggestions on what i can do to resolve this issue? i am also rather new to powershell so there many be a much easier way of going about it.
    many thanks
    Gordon
    wbadmin 1.0 - Backup command-line tool
    (C) Copyright 2004 Microsoft Corp.
    ERROR - One of the parameters or options specified is invalid: [quiet].
    See the syntax below.
    Syntax: WBADMIN START SYSTEMSTATEBACKUP
    -backupTarget:<VolumeName>
    [-quiet]
    Description: Creates a system state backup of the local computer and stores
    it on the location specified.
    To use this command, you must be a member of the Backup Operators group
    or Administrators group.
    Parameters:
    -backupTarget Specifies the location where you want to store the backup.
    The storage location requires a drive letter or a GUID-based
    volume of the format: \\?\Volume{GUID}.
    -quiet Runs the command with no prompts to the user.
    Example:
    WBADMIN START SYSTEMSTATEBACKUP -backupTarget:f:
    #adds windows server backup powershell snapin
    Add-Pssnapin windows.serverbackup
    #gets date
    $date = Get-Date -Format dd.MM.yyyy
    #declares backup location and adds date
    $backdir = ("\\backupserver\bpdbackups\DC\$date")
    #makes backup directory on network share
    mkdir $backdir | out-null
    #runs system statebackup
    wbadmin start systemstatebackup -backupTarget:$backdir -[quiet]
    #sends and email at the nd of the process
    $smtp = "192.168.xxx.xxx"
    $from = "Domain Controller <[email protected]>"
    $to = "Network Admin <[email protected]>"
    $body = "The backup operation has been successfully done! Date: $date"
    $subject = "Backup on $date"
    #Send an Email to User
    send-MailMessage -SmtpServer $smtp -From $from -To $to -Subject $subject -Body $body - BodyAsHtml
    write-host "Backup Successful"

    wbadmin start systemstatebackup -backupTarget:$backdir -[quiet]"[quiet]"? I guess you should remove the bracketswbadmin start systemstatebackup -backupTarget:$backdir -quiet

  • Web Viewer embedded (custom domain) and button url not work!!! (Urgent!!!)

    Many sorry for this question - we have a Web Viewer embedded (custom domain) that have all url (button with open in browser) that not work!
    On tablet (Apple + Android) the button work great but on web viewer they do not work!
    Any ideas to solve?
    I see it: Where to place add externalLinksOpen : 'window' to FrameService?
    web viewer URL links

    Any ideas to solve?

Maybe you are looking for