Relocating VM Storage - Business Continuity

I have a pair of 7410s and I am replicating a project containing the VBox iSCSI LUNs. In the event of failure I wish to switch over to the 7410 containing the replicated project.
Is there provision within VDI 3 to do this? I'm willing to script where required.
Alternatively is there a better solution using 7410s and VDI 3
Thanks

How about using an active passive cluster? This should work out of the box.
-Dirk

Similar Messages

Can w use rsync for Business Continuity for Oracle Applications Release12 ?

Hi ,
One of our customer has implemented Oracle EBS R12 (12.0.6) on HP-UX (IA).
Database Tier on a Two Node Oracle Database 10g R2 RAC
Application Tier on Two Node using Shared APPL_TOP with Load Balancer.
They want to implement DR site using Oracle Data Guard (RAC to Non-RAC).
I was referring to Note: 452056.1 +( Business Continuity for Oracle Applications Release 12 on Database Release 10gR2 - Single Instance and RAC )+.
In this note its mentioned that:
If you wish to synchronize your concurrent manager log and out files between production and standby, you need to create folders matching to the APPLCSF environment variables for each others......................... For example, set up an rsync job similar to the below example in cron, to run every few minutes.
Can we use rsync for Production systems without any issues? Customer is concerned about using freeware on their Production systems.
Rgds,
Thiru.

Thiru,
Can we use rsync for Production systems without any issues? Customer is concerned about using freeware on their Production systems.You can use it with no issues. Or, you could use any other copy tool to copy those files.
Thanks,
Hussein

Business continuity 11i and dataguard

Hi,
Is there a white paper/best practice for business continuity on 11i with single 10g instance and Dataguard solution? i've tried looking and cannot find and thing.
thanks
M.

Hi,
Please refer to:
Note: 403347.1 - MAA Roadmap for the E-Business Suite
Note: 464167.1 - Is Logical Standby Feature Supported For Oracle Applications Release 11i
Comparing Oracle Data Guard vs. Active Data Guard for EBS Environments
http://blogs.oracle.com/stevenChan/2008/10/comparing_oracle_data_guard_vs_active_data_guard_f.html
Regards,
Hussein

Business Continuity Plan

Hello all,
I'd like to know if the CAPA (corrective and preventice action) functionnality in PC3.0 can adress the Business Continuity Plan need for Bank industry for example?
Best regards

Hello sir Yes i have something about that It amy be very useful to u.<a href="http://www.newtonit.co.uk">business continuity plan</a>

Business continuity during planned SAP upgrades

What techniques are SAP customers employing to accommodate SAP upgrades and at the same time ensure 24/7/365 business continuity?
Thanks for sharing your experiences.
Fred

Hi Fred,
have you checked out the nZDM capabilities offered by SUM (details see here)? Additionally, you can find a good summary in this solution brief, where all other possibilities are summarized.
Hope this helps.
Bernhard

Business Continuity Process

Hi All,
I am in the process of defining Business Continuity Process, Organizations now span globally and have customers to support 24 X 7 X 365. With this level of automation, any breakdown in organizational information flow can cause a disruption in business continuity having a catastrophic effect on the organizationu2019s ability to support their customers.
Give some ideas or flowchart explanations how we can support SAP procument cycle when SAP system is down.
Please let me know if you need more explanation on this.
Regards,
Rohith

Hi;
Please follow below link:
http://download.oracle.com/docs/cd/E11882_01/install.112/e16783/toc.htm
Regard
Helios

Business continuity plans

Business continuation is very important to achieve the goals of the organization in thelong run. If the organiztion cannot continue in the future, it cannot achieve its targets or goals and eventually, it will come to an end creating huge loss and diverting fromthe objectives with which it was first established.
Business continuity plan template helps us with this problem. It gives us the ideas as to how we can continue our business to the long run. We can log in to https://bccatalyst.com/templates for more on this.

Hey,
it is depend on the WAS version (6.20, 6.40, 7.00 and etc),
here is some information:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/89cb626b-0901-0010-d2b7-f5dcff4e74c8
and:
https://service.sap.com/ha

Business Continuity of Databases....

I would welcome some Oracle DBA assistance to scope a piece of audit work for tender around business continuity of an oracle database/environment (managed and supported by a 3rd party provider). We have had several “security” audits/assessments of this oracle database, and its environment, i.e. the infrastructure on which the database is installed/operated, and the front end web application. But I just think that’s only half the coverage requiredwhen it comes down to risk, there’s still operational issues namely we call this “business continuity” practices and controls.
Can anyone help provide a scope of the things to include in a business continuity type audit of an Oracle Database/DBA provider? Even if its just top level bullet points that I can research further it will help. If you have ever done one before - do you have a scope of the work, if you have ever had such an assessment/audit done of your own busienss continuity practices for oracle environments you manage and support, what was included in the review?

It doesn't make a lot of sense to talk about business continuity at a database level - it needs to be addressed at a service level. Database failure is only one of many things that could affect the availability of the service.
But in general you need to think about the following
- What constitutes loss of service? I.e what is the trigger point for invoking your business continuity plans? You may have several levels of this, Full outage, loss of functionality, loss of access based on geographic area/user group/access channel, each with different plans
- Who makes the decision to invoke the plan/bits of the plan i.e escalation routes?
- Coming up with a plan for the various scenarios, Not just technical (That is often the easy bit) - things like
- Communication - how do you let the team invoking the plan, and the users know? Bear in mind the problem may be with networks etc. Does everyone have access to the plan, even if computer systems are down?
- Training
- Physical considerations. Do you need a new server room? Somewhere to work?
- Financial. What will the financial impact be? Can you get funds to pay for staff, kit, accomodation etc if necessary?
- Testing. The plans need to be tested. Can be a hard sell to management to really take your systems out, but it's often the only way. And this time you know you can easily turn things back on!
- Afterwards. Do you need to do any processing after the event? For example for one of my systems in the case of losing an area node, the plan is to revert to paper recording, and contact other offices for any urgent lookups etc. This requires backfilling the data onto the system once it is back available. You need to plan the amount of resource necessary for this.
You can come up with hundreds of different scenarios if you get carried away. You will never be able to plan for them all, so pick the most likely. It should be a continuously evolving process anyway. For example we had to add policies around bird flu (Both for a genuine pandemic, and more likely scenario that offices are shut down) a year or 2 ago.
Carl

Business Continuity features available in ASA-5585-x

Hi,
in Data Center environment using only one ASA-5585-x, what kind of business continuity features, a single 5585-x offers or can be configured to keep the business running, in case the firewall got failed.
Thanks
Mike

Hi,
I am not sure if I understood the question completely.
I am not really sure how any configuration on the device can help you if the actual device fails completely.
With regards to the hardware I think only the high end model with SSP-60 comes by default with 2 PSUs while others come with 1 PSUs though you can install a second PSU to the units and in this way provide some redundancy in the event of power failure though that naturally depends on other factors than the ASA alone.
To my understanding it is also possible to set up the single ASA 5585-X unit with dual SSPs. I have not had to set up such an environment so I am not sure how it exactly works. I am not sure how they handle together. I can't seem to find the document I was once reading about this. But I would imagine that this could provide redudancy to the firewall setup.
Then there is also Clustering ASAs (not same as Failover pair) units but again this naturally requires additional hardware and is something I have not setup up myself.
Then there is naturally configuring 2 identical ASA 5585-X units in Failover pair (Active/Standby or Active/Active) to provide redudancy in case of hardware failure.
We have some less critical environments set up with single ASA5585-X units and we naturally dont guarantee the same availability for those services as with setup where we have 2x ASA5585-X units in Failover. We do have replacement units for these and can naturally get replacements otherwise also.
- Jouni

DMS: Relocation of storage category/documents to another content server

Our DMS content server was implemented with a 3-tier environment (dev-test-production). There are several SAP instances storing documents to a shared storage category in the global DMS server.
I found recently that one of the production instances on 4.6C was inadvertently configured to store documents on the DMS development server in this same storage category name.
I have found programs to relocate documents from one storage category to another, which could be used if I configured a new storage category pointing to the production content server. However, for business reasons the name of the storage category should not be changed.
Note 445057 and document "Operational Guide - SAP Content Server" provide information on relocation of documents using programs RSCMSEX (export) and RSCSMIM (import). I would like to use these reports to export the documents stored incorrectly on the development server, change the configuration of the content server to the production server address, and import the documents back into the existing storage category.
The documentation does not state whether RSCMSIM will add the imported documents to existing content or will delete all other documents. I would like to insure that I will not lose existing documents in the production server.
I would appreciate advice or feedback from anyone familiar with these programs or relocating documents in DMS.
Thank you,
Kathie

Hi Aby,
if setting up a profile does not help, another proposal would be to use the BADI DOCUMENT_STORAGE01 with method BEFORE_LIST_STORAGECAT. Because here you will be able to influence which storage categories are displayed at "Check in to Kpro and Selecting the storage category". If only one category is handed back by the BADI method the pop-up should be avoided and the selected category should be choosen.
Maybe this could be a solution.
Best regards,
Christoph

Skype Business - continued disk i/o error

I am in china and totally reliant on Skype Business plan. Continue to get disk i/o error even after removing the appropriate user file, per the posted suggestion. What else can I check??? Help!!
Solved!
Go to Solution.

You can try to reset skype settings
http://community.skype.com/t5/Windows/Skype-auto-logs-off/m-p/938210/highlight/true#M69026
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

My Skype Number is busy continuously

I am trying to call up the skype number from my mobile number however it is coming busy continously.
Please help.
Thanks,
[Removed for privacy] Team
Post transferred to create its own new thread (topic);
Subject/title edited accordingly.

Hi, IAL, and welcome to the Community,
Hopefully, you are not signed on to Skype on the mobile device at the same time you are testing your Skype Number. If you are, that could be the problem. Try calling the Skype Number from a fixed line, instead. Otherwise, you will need to please contact Skype customer service directly to sort this as we here in the Community do not have the resources to diagnose and resolve.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Storage business document in SRM 7

Hi,
We have done setup of archive link (SAP Web Application Server-Application Server-Basis Services-ArchiveLink-Basic Customizing)
During creation of shopping cart in portal we attach some document e.g.word document (.docx), after ordering shopping cart when we display
shopping cart in BBP_PD we can not see same in attachement list.
When we attach document (Store business document)in BBP_PD we can display same in attachement link (Archive link).
Now attached document is going on SRM server, we want to store this in business document (Archive link)
Can you please give your feedback.
Thanks
Sudhir

Hi,
This note seems to be for adding a custom table , I have to add custom fields in the supplier business partner screen.
Do you have any idea how this should be done?
Thanks & Regards
Prabhu

Email storage is continually full

I'm going to try this one more time so i don't do something (throw/break/etc) with my iphone5 that i will regret ......
i posted a similar question in november 2014 but thought i would approach it in a slightly different way
my iphone5 has 16g of memory
my os 8.1.1 is taking up a good bit of hard drive space & can't upgrade to 8.1.2
i don't want to throw a curveball into this mix but is it possibly related to
when i went to the os8? i did not have this issue prior but I'm not sure it's the culprit.
my email is showing 5g of usage.
ive deleted every email on my phone & my server
ive deleted every photo & video on my phone
ive deleted most of my apps & all those of high usage.
in the "email usage" this literally showed
a .2 usage change...... (from 5.0 to 4.8)
i've done everything i know to do and additionally
what i have read on this site to do.
my wife has her iphone5c on a different email address
but we goes through the same commercial server.
my email address is our iTunes account.
ive deleted her photos, videos & emails as a step.
i do use dropbox but don't see how this would effect this situation.
to say this is frustrating may be the greatest understatement on the planet.
some suggestions say to go to a fresh reset/default approach to correct this
and that this was suggested by apple tech support. I'm having a hard time with that approach.
im not saying i will not do it as a last resort but surely there is another answer.
any assistance would be greatly appreciated.
tommy
<E-mail Edited by Host>

i deleted my email account and then reinstalled and it fixed my email storage problem
thank you

Why do i get a message that says my Icloud account does not have enough storage to continue my quest when i have 5G left?

Need help

how long (in days) since you have applied to the itunesconnect?
Have you got the confirmation email from them? if not - you still have to wait. If wait time >2 weeks then I would suggest emailing ([email protected]) or calling them.
they say you should get the confirmation or denial email in a week or a bit more.

Relocating VM Storage - Business Continuity

Similar Messages

Maybe you are looking for