Remediation View shows no data found

Hi Guys,
Am getting blank output for user risk analysis output type Remediation view, where are when you select the output type as Technical view I get data.
Let me know anyone has the fix for the same. The system is currently on 10.1 SP 5
Thanks
Mani

Hi Ilya,
Please update service catalog GRAC_GW_VIOLSUMM_REM_SRV alias name with LOCAL and try to run the risk analysis with remediation view.
Execution Path:
SPRO-->SAP Netweaver-->Gateway -->OData Channel -->Administration --> General Settings -->Activate and Maintain Services.
Thanks
Mani

Similar Messages

10.1 AC Remediation View Says No Data Found while Business View Shows Plenty

We are upgrading to AC 10.1 from 10.0. We configured gateway connection and I am using Chrome browser. Not sure why user risk analysis in remediation view comes back "No Data Found" while in business view there are plenty of risks. Any ideas? -Thanks so much.

Hi Joerg
Below note can fix your issue.
http://service.sap.com/sap/support/notes/2035538
Thanks
Mani

Financial Tax Register Report shows No Data Found

Hi All,
We are upgrading from 11.5.10 to 12.1.3, ofter upgrading to 12.1.3 when i running the Financial Tax Register Report it is showing No Data Found.
Please reply me ASAP.
Regards,
Raju.

Hi,
For your references i posted the log file of financial tax register report.
E-Business Tax: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RXZXPFTR module: Financial Tax Register
Current system time is 15-FEB-2013 09:38:25
Publishing concurrent program ZX : RXZXPTEX.
Request 487766 submitted.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Current system time is 15-FEB-2013 09:38:25
Request restarted at :15-FEB-2013 09:38:27
Publishing concurrent program ZX : RXZXPTEX.
Publishing request ID 487766.
Its a BIDI char set
Its not a BIDI language
FA_RX_SUBMIT_PURGE (PURGE API PROGRAM NAME =ZX_EXTRACT_PKG.PURGE) (ROWS PURGED =0)
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
36093
------------- 1) PRINT   -------------
Printing output file.
Request ID : 487765
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 15-FEB-2013 09:38:28
---------------------------------------------------------------------------

Upgrade to 4.0 shows no data found on tabular forms

Hi,
After upgrading from 3.x to 4.0, an application that had many tabular forms is now showing "no data found" in their regions. A few pages work, while many others do not.
Strangely enough, if I take the same sql in the source box and create a new page from scratch, the new tabular form shows the data properly. So it seems to be an issue with the upgrade. In one case it is a very simple "select col1, col2 etc from sample_table" type of syntax. Nothing complex there.
I wanted to see if others have experienced this.
In looking through the install log, I can not find any errors. The validation step also shows all objects compiled clean.
Thanks!
Erik

Hey David. Good to know I am not the only one.
Just to update some workarounds I have tried.
1) Taking an export from the 3.x application and importing it into 4.0 does not fix the issue (so maybe not a pure upgrade issue?).
2) Copying a page in 4.0 that has the issue and making a new page does not fix the issue.
3) Making a change to the tabular form sql in the source box and applying does not fix the issue.
Still the only workaround is to create a new page with same source sql and setup all the report field properties again.
Thanks,
Erik

Report Viewer shows incorrect data when viewing pages from last to first

Post Author: Fmorales
CA Forum: .NET
Hello.
I've made a huge report with Crystal Reports for Visual Studio 2005, and sometimes the Report Viewer show data with errors.
If I see all pages of my report in order, 1 first, then 2nd, 3, 4... until the last one.... The report is always correct.
If I see all pages in reverse order, 1 first (shown by default), then last one, then last one-1.... until 2nd.. All years show incorrect, except first one...
In an outer section, for every year, there is a final row which shows summarize calculated data. The error consists in that every value of the row is 0.
It seems that Crystal Report calculates while showing, that's good.. but... Why does it ignore the data before when I see directly the last page?? It forces me to see all pages one by one in ascendant order to ensure data is correct.. I must fix that error.
The way I calculate data in the problematic summarize row is a bit complicated, but I'll try... Let's focus in one only column (the other ones are similar). The summarize value is a formula which simply show a global value :
WhilePrintingRecords;
CurrencyVar margenActual;
which is being increasing or decreasing along the group:
WhilePrintingRecords;
CurrencyVar actual:=actual+CurrentFieldValue;
if {PresupPeriodifMesesAux_DS.TIPO} = 'PAGOS' then CurrencyVar margenActual:=margenActual-CurrentFieldValueelse CurrencyVar margenActual:=margenActual+CurrentFieldValue;
DefaultAttribute
It is placed in the backgrond property of a CrossTab cell in a hidden pre-section... Well.. I know it's a bit complicated, but I have to do that way because it was the only trick I found to make a summarize file before printing data summarized (that's why the line "CurrencyVar actual:=actual+CurrentFieldValue;" appeared in formula). So I also wanted to use this formula to acummulate "margenActual".
In the inner section I reset the actual value (this value always go fine):
WhilePrintingRecords;
CurrencyVar actual:=0;
Before end of year I reset the margenActual value:
WhilePrintingRecords;
CurrencyVar margenActual:=0;
I've tried multiple combinations (using WhileReadingRecords instead WhilePrintingRecords) but data is incorrect or I cannot get rid of visualization page's problem....
Any idea?
Thanks a lot

quote:
Originally posted by:
ntsiii
If you were previously using <mxXML> you WERE using
e4x.
So remove that tag, create an instance variable of the same
name, typed as xml, and in your result handler, do as VarioPegged
suggests, though I would cast/convert to xml first:
companies = XML(event.result);
trace(companies.toXMLString()); to look at your xml
var xlCompanies:XMLList = xmlCompanies..company; //all such
expressions return XMLList, never XML
trace(xmlCompanies.length()); //
Tracy
Ok so the ID of the mxXML was being interpreted as an E4X
variable at compile time?
I tried changing the name of the ID of the HTTPService call
from "marketData" to "MDATA" and assigning the variable marketData
to the result of the HTTPService query, which if I understand you
correctly should basically make everything work as it was before,
but it seems to be a problem.
when I try to run it puts an exclamation point on this line
<toolbox:TreeMap id="treeMap" width="1200" height="800"
dataProvider="{marketData}"
labelField="@cname" weightField="@amount"
colorFunction="{itemToColor}"
toolTipFunction="{itemToToolTip}"/>
That code refers to a SWC file. Apparently it wants
marketData to be a data provider. If I change the dataProvider
reference above to "MDATA" (the ID of the HTTPService) the App
compiles, but I get two errors at runtime:
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
ReferenceError: Error #1081: Property @age1 not found on
mx.rpc.http.mxml.HTTPService and there is no default value.
What should I change this reference to? It won't compile if I
use the variable I made for the e4x results and it is reading
gibberish if I have it read directly from the
HTTPService....?

Report shows "No data found" when validation fails

Hi folks,
I'm new to the OTN and have a short question regarding validations/report pagination.
We are using Apex 4.0.2.00.07.
I have a page containing a report with three columns.
First column is a checkbox (f30), the second one a date picker and the third one is a value field (f34).
I'm trying to build a validation for the value field (should only allow numeric values, but is varchar2) and used a validation with "Function Returning Boolean".
The PL/SQL code is:
DECLARE
vrow BINARY_INTEGER;
v_number FLOAT:=0;
BEGIN
FOR i IN 1 .. APEX_APPLICATION.g_f30.COUNT
LOOP
BEGIN
vrow := APEX_APPLICATION.g_f30 (i);
v_number := to_number(APEX_APPLICATION.g_f34(vrow));
RETURN TRUE;
EXCEPTION
WHEN OTHERS THEN
RETURN FALSE;
END;
END LOOP;
END;
The validation works fine, but every time I enter a non numeric value and the validation fails (error message is displayed correctly as notification) I get a "report error: ORA-01403: no data found" in the pagination area of the report.
Tried to disable pagination completely, but the error still displays when the validation fails.
Any help would be appreciated.
Thanks in advance and regards
Sandro

Content of the checkboxes is ok, debugging showed
1:7
2:8
(records 7 and 8 where ticked)
Debugging console also shows:
     0.10900     0.00000     Processing point: Before Box Body
     0.10900     0.00000     Region: Shareclassinformation
     0.10900     0.00000     Item: P59_IS
     0.10900     0.00000     Item: P59_NA
     0.10900     0.00000     Item: P59_CO
     0.10900     0.00000     Region: Attribute Selection
     0.10900     0.00000     Item: P59_LO
     0.10900     0.00000     Item: P59_ID
     0.10900     0.00000     Item: P59_IDAH
     0.10900     0.00000     Item: P59_IDAT
     0.10900     0.00000     Item: P59_SHO
     0.10900     0.00000     Item: P59_UTD
     0.10900     0.00000     Item: P59_X NA
     0.12500     0.00000     Region: Attributes
     0.12500     0.23400     Item: P59_NOT
     0.12500     0.00000     show report
     0.12500     0.00000     determine column headings
     0.12500     0.00000     parse query as: DB
     0.35900     0.14100     binding: ":P59_LOV_AT"="P59_LOV_AT" value="64"
     0.35900     0.00000     binding: ":P59_IDT"="P59_IDT" value="51"
     0.50000     0.01500     print column headings
     0.50000     0.00000     rows loop: 20 row(s)
     *0.51500     0.01600     report error: ORA-01403: no data found*
     0.51500     0.00000     Computation point: After Box Body
...

Print link on report shows 'no data found' when LOV has not been used

Hi all,
I have a simple standard report that queries data based on the value in a Select List. This Select List allows users to pick a year for the report. The LOV has a default of TO_CHAR(SYSDATE,'YYYY').
If I open the page using the associated Tab everything wotks OK. However, if I open the page via a button on my home page, the prink links fails:
The page opens OK, the select list defaults OK and the report shows the correct data. However, if I click on the 'Download as CSV' or 'Print' links I get 'no data found'.
If I update the LOV to 2010 everything works. If I set it back to 2009 evenrything works. I just cant get it to work when I open the page.
I have tried adding computations to get this to work, but this does not seem to help.
Any ideas?
Thanks,
Martin

Hi,
It would depend on what has been added, if anything, to the redirect. The redirect should just function as though you had typed in a URL into the address bar and pressed Enter. The page doesn't get submitted, so any data entered onto the page itself is, unless it is already in session, lost. A button, however, should submit the page and Apex will store all values in the session. So, if the value you need for the LOV is from the previous page, then this is the preferred method - but, note, that the redirect can also store values provided the page item name and the value is included in the redirect's URL string
Andy

Date Picker query showing "No Data Found", works in SQLPlus

I have created 2 Date Picker items - P2_START_DATE and P2_END_DATE. I have set the format of these to 'DD-MON-YYYY'.
This is the query I have to select the data based on the values from the date pickers:
select sample_date,reading from meter_data where sample_date between to_date(:P2_START_DATE,'DD-MON-YYYY') and to_date(:P2_END_DATE,'DD-MON-YYYY') order by sample_date;
The P2_START_DATE is '20-JAN-2011', the P3_END_DATE is '21-JAN-2011'.
The query returns "No Data Found" when run in APEX, but when I run this in SQLPlus on the host I get data:
select sample_date,reading from meter_data where sample_date between to_date('20-JAN-2011','DD-MON-YYYY') and to_date('21-JAN-2011','DD-MON-YYYY') order by sample_date
20-JAN-2011 .39
20-JAN-2011 .14
20-JAN-2011 .14
20-JAN-2011 .18
21-JAN-2011 .13
Can someone explain what I'm doing wrong? I have tried a few different formats, with no luck.
TIA

Hi Jeff,
My Requirement is also looks like same, but am not able figure it out the reason why am getting no data found message in my chart(report).
Requirement:
I have a page, where two date picker(html5) items let say P30_FROM_DATE, P30_TO_DATE are there, apart from this i have one button as well,
when the user select the from and to date from the date picker, and as soon as click on the button (SHOW), need to display the 2D Stacked Bar Char.
so to achieve this, i have created a blank page, under region i have created a chart (2D Stacked Bar Chart), under items--> i have created two date picker items and one button.
my query is
SELECT NULL LINK,
       FLOW_STATUS_CODE LABEL,
       COUNT(ORDER_NUMBER) VALUE
FROM
       OE_ORDER_HEADERS_ALL
WHERE
       CREATION_DATE
       BETWEEN TO_DATE(:P30_FROM_DATE,'DD-MON-YYYY') AND TO_DATE(:P30_TO_DATE,'DD-MON-YYYY')
GROUP BY FLOW_STATUS_CODE;
Issue:
Once i select the From and To Date, when am click on Show button, am not able to see as desired chart, instead am getting no data found message in the chart location.
Can you please tell me how to do this.
i would like to know that, how do i capture those two date item values in my query, and how do i initiate my report when am pressing button.
please revert back to my below mail.
Regards
Santhosh Kumar. K
[email protected]

Calendar year view showing wrong date

My Calendar shows the correct date in the dock, and also in Day, Week and Month view but when I click on Year view it highlights yesterday's date as Today!
Has anyone else had this problem and, if so, have they found a remedy?
Many thanks.

I have noticed a good number of such issues with I-Cal over the last several months. Many, far more serious than this date issue. The new beta version of I-Cal is right around the corner and if it works as it usually does (latest Safari update released yesterday fixed the crash issues), the next update should repair these issues. I hope this helps.

MSS Time Approval - Detailed approval view shows time data for different PN

Hi Experts,
We're using the standard MSS time approval without workflow and here're 2 issues we have:
There're multiple time records for multiple employees in MSS for approval.
1. When manager tried to select all the records for one employee and click the "Approve" button in the collective approval screen, then all the records will be approved including records of other employees.
2. When manager click the hours of one record for a certain employee to go to the detailed/individual view, other employee's time data will be displayed in the detailed view window.
Please help!
Thanks,
Hongling

Hello Kamalbabu,
after Migration of our ess applications from WebDynpro JAVA to Web Dynpro ABAP we have a problem that sounds similar to the one you descriped above.
In POWL the button 'details' (detail view) for leave request approval seem to have no function.
Because your post is a few years old, I guess you solved the problem and hope you can share your solution with us.
You will find more information about our specifc problem in this threat: http://scn.sap.com/message/15482063
Thank you.

No data found in csv output

I have a classic (non-interactive) report that shows some strange behaviour.
It's a simple page with a report region.
On the report attributes page under 'report export' the value for 'Enable CSV output' is set to 'Yes' and 'Link label' has a meaningful discription.
In the development database it works as expected:
When I run the page the data is displayed and when I click the link for csv output I can either save or open the file. In both cases I find the data I expect in the csv file.
In production, however, when I run the page the data is displayed, but when I click the link for csv output the resulting csv file just shows "No Data Found"
I can imagine the report not returning any data, but in that case I shouldn't see any data on screen either.
And it's extra weird that in development it all works fine.
Anybody that can offer any help?
Thanks in advance.

Hi Eric
I would never dream of telling anyone not to argue with me :D I've been wrong before and will be again, no doubt!
For the DIV problem, I was more concerned with < appearing in the output rather than the SQL statement itself - generally problems such as this happen when something on the page is incorrectly formed. When you get a chance, in FireFox, install the Web Developer add-on. When this is installed, on the right-hand end of its toolbar, you will see three buttons - the last two tell you about css and javascript errors. For HTML errors, if you have a text editor that has syntax highlighting, do a View Source on the loaded page, take a copy of the source and paste it in to a new document in the text editor. Save this with an HTML file extension. This should colour-highlight everything. It should become obvious what is wrong as you tend to end up with way too much in the same colour. Finally, on the loaded page, right-click on the DIV text and select Inspect Element - this switches you to a heirarchical view of the HTML on the page in the FireBug pane. Follow the tree up from the DIV and have a look at the structue - at some point, something will look wrong.
Andy

No data found in MSS Reports.

Hi All,
I've configured the MSS business package in my EP.I've done all the required configuration to get it work.But in all my MSS reports it is showing "NO DATA FOUND".Even the employee search is showing the same message whereas in ESS the employee search and other views are showing proper data.
Can anyone suggest what could be the issue?
Your efforts would be rewarded.
Regards.

hi,
MSS now use Launchpad for reporting which u need to configure from the backend system.
You need to customise the Launchpad reportfrom the backend uding t-code FPB_LP_MSS_REP_CUST. this t-code will initialise ure Launchpad report. Check that table FPB_LP6_SNI is no
longer empty, and has the required entry. Then run the transaction to
convert.
Manually add the line to table FPB_LP6_SNI. The values are role = 'MSS', instance = 'REP', and sni_used = ' ' (blank). Then run the transaction to convert.
Also try to run run program #PWPC_CONV_MDT_TO_LPA# with type #RPT0#.
If you want only MDT report's...i.e only HR report..you can include Reporting iView from SAP provided content folder...this is standard iView which will display Manager Desktop.
Thnaks and Regards,
Jigar OZa

No data found - after paging

Hi all,
I have a report based on two hidden fields, which are all the time filled with the correct values.
After the first submit, the report shows up correctly.
As soon as I click on "next" to see i.e. the next 15 records the report
shows "no data found" message.
As soon as I reload the page (by clicking F5 key in IE) the report shows the correct next 15 records.
I did not reset any values in branches or sth...
Can anyone help?
Thx and regards.
KMC

Hi,
Try setting the Maximum number of rows returned in the layout and pagination section of the report and see if that helps.
Good luck,
Suma.

Listview Report: how to hide "no data found" message

Good evening everybody,
I use the "jquery mobile theme 50" and the "listview report" of it. The report always shows "no data found"-entry if the source query doesn't return any row.
Is there a way to suppress this entry in Apex? I can hide "no data found"-entry in html using CSS, but I don't want to have it in the html at all.
Has someone an idea?
Thanks a lot!
Jewgenij

Thank you very much for the answer!
Unfortunately it works only for desktop themes but doesn't for jquery mobile Theme 50 :-)
The help text for the listview's (jquery mobile Theme 50) property "No Data Found Message" is
Defines the text message that displays when the query does not return any rows. If no value is specified the text of the system message APEX.REGION.NO_DATA_FOUND_MESSAGE is used.
BR
JeMo

Display 'No Data Found' when there is inv data but still there is xml data

Hi,
I am converting an rdf to BI publisher. The issue is when there is no detail (inv) but still there is still xml data , due to which the report is getting printed with the skeleton template and blank details(inv).
I need to avoid printing the report out if there is not inv detail even though there is xml data. or atleast show 'NO DATA FOUND' msg. and print the report output only when there is inv data.
Any help is greatly appreciated.
sample XLM generated when there is inv data:
- <ARXCBI>
- <LIST_G_SETUP>
- <G_SETUP>
<COMPANY_NAME>GL SOB</COMPANY_NAME>
<FUNCTIONAL_CURRENCY>USD</FUNCTIONAL_CURRENCY>
<COA_ID>23456</COA_ID>
<SET_OF_BOOKS_ID>1</SET_OF_BOOKS_ID>
<LIST_G_SITES />
<REPORT_NAME>Billing Invoice</REPORT_NAME>
<SUB_TITLE />
</G_SETUP>
</LIST_G_SETUP>
<RP_COMPANY_NAME>GL SOB</RP_COMPANY_NAME>
<RP_REPORT_NAME>Billing Invoices</RP_REPORT_NAME>
<RP_DATA_FOUND />
<RP_SUB_TITLE />
<R_DEFAULT_COUNTRY>US</R_DEFAULT_COUNTRY>
<R_DEFAULT_COUNTRY_DESC>United States</R_DEFAULT_COUNTRY_DESC>
<T_REPORT_TOTAL />
<RP_COUNTER />
<INV>Invoice</INV>
<CM>Credit Memo</CM>
<ADJ>Adjustment</ADJ>
<XREV>Reverse Cross Site Credit Memo</XREV>
<XAPP>Apply Cross Site Credit Memo</XAPP>
</ARXCBI>
Thanks!

Hi Srini,
Now I am running into another problem. When there is no detail data it displays 'No data found' as expected in the report output. But is there any way to restrict the print option (avoid wasting the paper) to just display 'No data found' in the output but not to print the output only in this case.
I really appreciate any help!

Remediation View shows no data found

Similar Messages

Maybe you are looking for