Remittance challan in withholding tax

Dear All,
   When i am creating Remittance challan system is throwing error " Number group not maintained for company code XXXX section IEQXXXX  and business place 194C". can any one tell me what is this error...
Regards,
Suresh Patipati.

Hiii..
Create number Group follow the path..IMG-FA-****-Withholding Tax-Extended Withholding Tax-Posting-India-Remittance Challan-Maintain Number Groups.Give your Company code Section code,w/h key & Number Group Than assign number ranges to number groups & after that maintain number Ranges for number groups.
I think this will solve your problem Please let me know if problem stills exists.
Rgds,
D RANA

Similar Messages

  • Create remittance challan in withhlod tax

    Hello friends...
    while create remittance challan using T code J1NCHLN  i got error Number group not maintained for CO code xxx section IEQ xxx and business place xxxx.
    thanks

    Hi,
    Kindly maintain the entries in the table  J_1IEWTNUMGR_1 and the issue
    will be resolved.
    br, Guido

  • Withholding Taxes - NON CREATION OF REMITTANCE CHALLAN

    Hi,
    TDS remittance challan is not getting created. The following error is thrown:-
    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.
    I have applied the following SAP NOTES 1358294, 962858, and 370163
    I am stuck with this issue for the past few days.
    Can someone guide me on this forum?  This is very critical.
    Regards,
    V Rajeshwari

    Chintan,
    I have taken care of all the inputs.  Any other things to be looked into?
    Regards,
    V Rajeshwari

  • Extended Withholding Tax Remittance challan

    Hi,
    I am unable to generate remittance challan for ext WHT. Can anyone tell me the steps for configuring the same.
    I would also like to know the process flow of remittance challan and then bank challan and the reflection of the same in reports. I would like to know what are the steps to be followed soon after deduction of tds from vendor invoice in FB60.
    Thanks in adv.
    null

    HI,
    1.     Payment to Income Tax Authorities
    1)     TCODE: J1INCHLN
    2)     COMPANY CODE: 3100
    3)     FISCAL YEAR 2007
    4)     BUSINESS PLACE/SECTION CODE: ENTER YOUR LOCATION         CODE EG:3100
    5)     POSTING DATE: FROM & TO DATE FOR EG FOR MONTH OF APRIL WRITE DOWN 010403 TO 30042007
    6)     SECTION : 194C FOR CONTRACTORS AND 194J FOR PROFESSIONALS
    7)     RECIEPIENT TYPE:  PUT CO   TO    OT
    8)     DOCUMENT DATE: ENTER DATE
    9)     BANK ACCOUNT : BANK A/C
    10)     CLICK ON THE CLOCK
    11)     CLICK ON DOCUMENT NUMBER.
    12)     ENTER
    13)     SEE THE TOTAL TDS AMOUNT LIABILITY
    14)     CLICK ON GREEN ARROW     
    15)     DOUBLE CLICK ON RS. 1
    16)     CHANGE THE AMOUNT RS. 1 TO TDS LIABILITY AMOUNT.
    17)     TEXT: ANY INFORMATION.
    18)     SIMULATE>SAVE.
    NOTE DOWN DOCUMENT NO. AND CHALLAN NO.
    STEP2 BANK CHALLAN UPDATION
    THIS STEP IS TO BE DONE AFTER PAYMENT HAS BEEN MADE TO THE AUTHORITIES AND THEY HAVE GIVEN A CHALLAN NUMBER. IF NO NUMBER HAS BEEN GIVEN PLEASE USE A SEQUENTIAL NUMBER.
    1)     TCODE: J1INBANK
    2)     COMPANY CODE : 3100
    3)     FISCAL YEAR :2007
    4)     CHALLAN CLEARING NUMBER: SELECT  THE NUMBER OF DOCUMENT THAT WAS GENRATED PREVIOUSLY GENERATED THROUGH T.CODE J1INCHLN
    5)     BANK CHALLAN NUMBER: IF SOME NUMBER HAS BEEN GIVEN BY THE BANK FINE ELSE PUT ENTER YOUR LOCATION CODE EG: 3100/2007/01
    6)     BANK CHALLAN DATE: PUT THE DATE ON WHICH IT WAS DEPOSITED IN THE BANK
    7)     BANK KEY: ENTER YOUR HOUSE BANK OF  WITHDRAWAL ACCOUNT XX123
    8)     CLICK ON THE CLOCK
    9)     MESSAGE COMES BANK CHALLAN UPDATED.
    STEP 3 PRINTING WITHOLDING TAX CERTIFICATE
    1)     TCODE: J1INCERT
    2)     COMPANY CODE : 3100
    3)     FISCAL YEAR :2007
    4)     BUSINESS PLACE(ZSECCO): ENTER YOUR LOCATION CODE EG: 3100
    5)     SECTION : 194C FOR CONTRACTORS AND 194J FOR PROFESSIONALS
    6)     POSTING DATE: DATES FOR WHICH CERTIFCATE HAS TO BE ISSUED FOR EG 010403 TO 300403 FOR MONTH OF APRIL
    7)     BANK CHALLAN DATE: PUT THE SAME DATE AS BANK CHALLAN DATE I.E ON WHICH YOU HAD MADE THE TDS PAYMENT.
    8)     VENDOR: ENTER VENDOR CODE WHOM YOU WANT TO PRINT THE CERTIFICATE
    9)     CERTIFCATE DATE: DATE OF ISSUANCE OF CERTIFICATE
    10)     SIGNATORY:PERSON SIGNING THE DOCUMENT
    11)     DESIGNATION: DESIGNATION OF PERSON SIGNING THE DOCUMENT
    12)     PLACE OF PRINTING: PUNJAB OR AHEMDABAD SO
    13)     CLICK ON THE CLOCK
    14)     CLICK ON PRINT IMMEDIATELY
    15)     CLICK ON PRINT ICON.

  • In Withholding Tax, Amount is not appearing in Remittance Challan

    Hi,
    I have done WHT configuration in Implementation project, This is my 1st Project and I am new in SAP, I am facing following 2 Problems
    1) Remittance Challan is getting prepared.but amount is not showing in the remittance challan, all the process till Certificate is happening smoothly. Please advice, where my settings went wrong or If I missed something in the configuration?
    2) Please also guide or tell me the steps for configuring E-TDS filing.
    Again requesting to kindly provide the solution.
    Thanks
    Regards
    Sunil

    Your Qn. No.1 is answered in the following thread.
    Re: WHT Error while J1INCHLN ?

  • Error while doing Remittance Challans (Withholding Tax)

    Hi all,
    I am working on ECC 6.0
    while i am doing Remittance Challans wiht T.Cpd: J1INCHLN the following error is comming:
    " Number group not maintained for CO code 1102 section IEQ1102 and business place 194C"
    can any one please give solutin to solve this
    Thakning you

    you need to maintain the detials in tabel J_1IEWTNUMGR_1.
    Use SM30 and give this table and say maintain values.
    reward if useful
    sarma

  • Tax Remittance Challan Creation

    Hi,
    while creating the remittance challan the error is coming as follows
    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.
    but when going through the particular table the data is properly displaying.

    HI, Dutta,
    For Error 8i702 reasons are below.
    1. park and posted the docment . then remove the V from with_item table Satus field.
    2. In document Bp/SC is there or not for tax lines ?
    3. check Miro - Inv reduction functionality is use ?
    Please give me your contact no ?
    Reg
    Madhu M

  • Creating vendor challan(withholding tax)

    Hi sap Guru,
    When i am creating vendor challan this is error came .NUMBER KEY NOT FOUND ,How to solve this issues ,kindly give me a solution ,
    Thanks in Advance
    Girish

    Hi,
    Please check the following settings.
    Financial Accounting (New) > Financial Accounting Basic Settings (New) > withholding Tax > Extended Withholding Tax > Posting > India > Remittance Challans
    Also check,
    logistic- gerneral > tax on goods movement > India > Tools > Number Range
    Regards,
    Jigar

  • Withholding Tax challan

    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I 702
    Diagnosis
    The corresponding withholding tax line &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.
    I am getting following please help
    sd/-
    Sreenivas.P

    Hi
    The problem for not updating the challan is an error in the program. kindly lodge an OSS Message.
    Our Company also faced the same problem & the temporary solution given was to change the assignment field of TDS Line Item to "0002" & update the challan.
    Try this out & Hope this solves your problem
    Regards
    Veena kunthe

  • Withholding tax - Remittance Chalan

    Hi,
    i had configured withholding tax and posted it was cal good but when i am going for Remittance Chalan with T.Cod "J1INCHLN - Create Remittance Chillan " i am having following error:
    "Section Code IEQKLBP could not be determined in Customizing" in this "KLBP" is my business place.
    in the above screen it is taking section code but not business place.
    can any one give me solution .
    thanking you
    mahesh

    Hi,
    Follow below steps...
    1. Use transaction SM30 and enter view J_1IINDCUS, click on maintain.
    2. New Entry, enter your company code and select month April First Month.....save the settings and try..
    Regards,
    Chintan Joshi

  • Withholding Tax for multiple company codes-Bank Challan issue

    Hi
    I am held up with one issue.
    I have four company codes and Extended withholding tax is activated for all the company codes.  I have assigned the same number group and number range status for all the company codes.
    Now when I try to update Bank challan for a TDS clearing document, the system says bank challan has already updated.  But the challan is not updated yet.  When we see the document, the challan number and date is coming as blank only.
    Is it due to assigning the same number ranges across company codes ?
    Your views are highly welcome.
    Regardz

    No answer ?

  • Surcharge tax code not appear in Remittance Challan(J1INCHLN)

    Hi,
    Surcharge W/tax code is not being displayed in Remittance Challan(J1INCHLN). While we go to J1INCHLN for Creation of Remittance Challan - Post Outgoing Payment :Header Data(F-07) adjusting with 1 based on Document Number it shows all four values of Base, Surcharge, Education Cess and Higher Edu Cess. After adjusting Total TDS value value and SAVE the document, screen appears Create Remittance Challans. Here it shows Bsse, Education Cess and Higher Edu Cess values with corresponding tax codes except surcharge tax codes and values. As a result Total TDS value which was deducted in J1INCHLN (F-07) screen is not being matched with TDS amount which shows in the screen after saving the record. Why this Surcharge tax code and corresponding value is not being appeard after configuration in J1INSUR ?
    Regards,
    Anindita

    Hi,
    1.If you have separate tax codes for Surcharges, J_1IEWT_SURC table
    should be maintained, by setting the check box checked, for the company
    code. Those tax codes should be available in the J_1IEWTSURC table (use
    SM30 to maintain these values)
    2.  If you are using separate tax codes for Education cess, those tax
    codes should be maintained in the J_1IEWTECESS table and 'X' should be
    maintained for the company code in J_1IEWT_ECFLAG table.
    3. Make sure that in the table for surcharge you have only the tax types
    relevant for surcharge AND DOES NOT CONTAIN TAX TYPES RELEVANT TO
    BASIC TAX AND CESS AND
    Make sure that in the table for ECESS you have only the tax types
    relevant for ECESS AND DOES NOT CONTAIN TAX TYPES RELEVANT TO
    BASIC TAX AND SURCHARGE
    Warm Regards,
    Sadashivan

  • Error While Creating Remittance Challan

    Dear All
    I have made down payment to a Vendor of Rs. 10,000 .TDS @11.33 was deducted on the Down Payment. Then he raised an invoice of Rs. 100,000. Again TDS was deducted on the Rs. 90,000 balance amount.
    Now when I am  Cretaing  Remittance Challan for him I am getting the following error.''
    No unpaid tax lines exist for the given selection criteria.Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.
    Thanks and Regards
    Kanwaljit

    The following may be the one of the cause please check all.
    1. Check section code & Bussuniss place at document level in BSEG. if the section code is not updated at document level u can not update the section code and bussiness place for Direct FI invoices from J1INPP as it is meant only for MM invoices. u has to reverse the invoice and repost it. or else develop a BDC/program/query which can update the section code.
    2. Check the repient type at vendor master, and also check wheather the recipent type was changed after posting document it ussullay occurs. the possible solution is again the same reverse the document and repost it.
    Check these two things first and let me know it the problem still persists.
    Thanks & Regards
    Krishna Chaitanya

  • Withholding tax -number could not be determined for numbering group ID0017

    While positing the FB60 transaction with withholding tax for country Indonesia, the below error is coming:
    A number could not be determined for numbering group ID0017
    Message no. 7Q630
    "The system could not determine a certificate number for the numbering
    group.
    Withholding tax types exist that are relevant to numbering. The system
    cannot determine a certificate number because the Customizing settings
    are incomplete.
    Sysem Response
    Payment cannot be made.
    Procedure
    Check the number ranges in the numbering group."
    Already seen the wothholding tax number range and it is coorec. Please advise how to resolve.

    Dear,
    Please check whether you have assigned the number range to the number group in the below setting
    Spro
    Financial Account Global Setting> Withholding Tax>  Extended Withholding Tax> Posting> India> Remittance Challan>     Assign Number Range to Number Groups

  • Error in Creating Remittance Challan -TDS

    Hi,
    I have Created PO and Invoice of the same of Rs 52,500/- out which Rs 1,176/- is Withholding Tax (TDS) payable. So when I go to J1INCHLN Tcode to create Remittance Challan fill the relavant details and execute it ask me Choose Selection Creation, those are Document number , Reference, Payment Order. So I select the document number and click ok. After that it shows me error saying, "There are no open Items managed in account 13113940."
    Where as  in  T-Code FAGLL03 its shows me in open Items.
    Can some one guide me why is it so happening. Or is there something missing.
    Also how TDS cretificates is done and TDS payment is done
    Points will be awarded.
    Regards,
    Arvind

    Hi,
    Check you GL account in FS00 > Control Data, whether Open item managed check box is checked.. if not tick it and do the transactions once again.
    After bank challan you have to do challan updation by using T Code J1INBANK.  After that you can run the TDS certificates by using T Code J1INCERT.
    Hope it helps
    Saravanan.A
    Assign Points if it is useful.

Maybe you are looking for