Remote alert notification when s2s tunnel tears down
Does anyone have any insight on how to set up an alert notification (say email) natively whenever a s2s tunnel comes down. Currently experiencing some infrequent s2s issues on an ASA5510 - IOS 8.0(3)
You create a class for that level and then have it emailed to you.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a2e04.shtml
Similar Messages
-
Email Alert/Notification when client status changes?
Hi,
Does ARD allow for email alerts or notification when a client goes offline or in sleep mode?
Also, does ARD monitor the ON/OFF status of a screen attached to a remote computer?
Thanks,
LMB1980Something like Dejal Simon might work for you. I don't know of any way for a Mac to detect whether the monitor is turned off or not, though.
-
In 12c OEM where can I set the notification when the Agent is down.
Hello Experts,
In 10g OEM environment , while creating the notification rule , we have a tab "availablity" which has the option to choose for the Agent target availability.
But while creating a rule in the 12c , I didn't find that kind of option. So, how can I enable my self to alerted for the agent nonavailability.
Thanks,
Naveen kumarEM12c has an entirely different set up for notifications. You would configure this under the Setup menu by selecting Incidents, followed by Incident Rules.
Within Incident Rules you should see a couple default Oracle-provided incident rulesets. I created an additional ruleset (priority 3, after the default rulesets) that contains various rules, each rule matching a type of incident for which I want to receive notification.
Specifically for the "agent down" situation, my rule is set up as:
Target Type is Agent
Status in (Closed; New)
Category is Availability
Then you specify actions to occur when the rule gets triggered -- I've specified the action to email my EM administrator login, which is configured with my email address. -
Alert error when master database is down
When the master database is down (server maintenance, offline back up) a lot of error messages appear in the alert.log of the slave database. Is possible to disable registration of error ORA 12012 and related when master database is closed ??
No, errors reported by the SNP processes, like most background processes, are always recorded in the alert.log
-- Anita
Oracle Support Services
null -
No Internet access when easy vpn tunnel is down.
Hi.
I have an error. i have a 819 router. with a Easy vpn tunnel.
And i am using the Identical Addressing feature, where i nat vlan1 over loopback0
I also have a vlan2 where i dont use identical addressing.
I have the Easy vpn tunnel configured on loopback0 and vlan2
from Vlan1 i nat to looopback0 with
ip nat inside source static Network 192.168.250.0 192.168.5.0 /24
and i nat outside with
ip nat inside source list INET interface GigabitEhternet0 Overload
ip access-list extended INET
permit ip 192.168.5.0 0.0.0.255 any
When tunnel is up, there is internet from vlan1, vlan2 and loopback0
But when the tunnel is Down, i can only get internet from Vlan2 and loopback0
The route for the tunnel is 0.0.0.0, i need all data to go to the vpn when its up. and to the internet when its Down.
Any ideas?
Thanks.That is correct.
Config.
controller Cellular 0
no cdp run
track 1 ip sla 1 reachability
default-state up
ip tcp synwait-time 10
ip ftp source-interface Vlan1
ip ssh rsa keypair-name Router.yourdomain.com
crypto ipsec client ezvpn VPN-Cel
connect auto
group VPN key -key-
mode network-extension
peer 12.12.12.12
virtual-interface 1
username RouterCel password Password
xauth userid mode local
crypto ipsec client ezvpn VPN-Eth
connect auto
group PANTst key -key-
backup VPN-Cel track 1
mode network-extension
peer 12.12.12.12
virtual-interface 1
username Router password Password
xauth userid mode local
interface Loopback0
ip address 192.168.6.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip virtual-reassembly in
crypto ipsec client ezvpn VPN-Cel inside
crypto ipsec client ezvpn VPN-Eth inside
interface Cellular0
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat outside
ip inspect CCP_LOW out
ip virtual-reassembly in
ip verify unicast reverse-path
encapsulation slip
load-interval 30
dialer in-band
dialer idle-timeout 0
dialer string hspa-R7
dialer-group 1
no peer default ip address
async mode interactive
crypto ipsec client ezvpn VPN-Cel
interface FastEthernet0
no ip address
interface FastEthernet1
switchport access vlan 2
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface GigabitEthernet0
ip dhcp client route track 1
ip address dhcp
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat outside
ip inspect CCP_LOW out
ip virtual-reassembly in
duplex auto
speed auto
crypto ipsec client ezvpn VPN-Eth
interface Serial0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
shutdown
clock rate 2000000
interface Virtual-Template1 type tunnel
no ip address
ip nat outside
ip virtual-reassembly in
tunnel mode ipsec ipv4
interface Vlan1
ip address 192.168.250.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
no autostate
interface Vlan2
ip address 192.168.16.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
no autostate
crypto ipsec client ezvpn VPN-Cel inside
crypto ipsec client ezvpn VPN-Eth inside
interface Dialer2
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip local policy route-map myRoutes
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list INTERNET interface GigabitEthernet0 overload
ip nat inside source static network 192.168.250.0 192.168.6.0 /24
ip route 0.0.0.0 0.0.0.0 Cellular0 254
ip route 8.8.4.4 255.255.255.255 Cellular0
ip access-list extended INTERNET
permit ip 192.168.6.0 0.0.0.255 any
permit ip 192.168.16.0 0.0.0.255 any
ip sla auto discovery
ip sla 1
icmp-echo 8.8.8.8 source-interface GigabitEthernet0
ip sla schedule 1 life forever start-time now
dialer-list 1 protocol ip list 1
dialer-list 2 protocol ip permit
route-map myRoutes permit 10
match ip address 101
set ip next-hop dynamic dhcp
access-list 1 permit any
access-list 23 permit 12.12.12.12
access-list 23 permit 192.168.0.0 0.0.255.255
access-list 101 permit icmp any host 8.8.8.8 echo
control-plane -
L2TP script to initiate a router reload when tunnel goes down - working
Hi,
Just thought I would post a working EEM script on doing a router reload when the L2TP tunnel goes down....
I am using a 3825 router to initiate a site-to-site tunnel with a 3rd party vpn service - StrongVPN. On the odd occasion when the tunnel goes down, the l2tp tunnel state goes to "no session left" and the virtual-ppp1 interface - which is tied to the l2tp vpn - goes down. Unfortunately, because I have no control on the far end router, the only way to bring it back up is thru a router reload....
Here you go:
event manager applet L2TP-DOWN
event syslog pattern "%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-PPP1, changed state to down"
action 1.0 syslog msg "The L2TP VPN is down"
action 1.1 cli command "enable"
action 1.2 cli command "reload in 10" pattern "confirm"
action 1.3 cli command ""
action 1.4 syslog msg "EEM scheduled reload in 10 minutes"
event manager applet L2TP-UP
event syslog pattern "%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-PPP1, changed state to up"
action 1.0 syslog msg "The L2TP VPN is up"
action 1.1 cli command "enable"
action 1.2 cli command "reload cancel"
JasonHi Arie,
So, here is the script I am using....
When the L2TP tunnel goes to "no sessions left", the virtual-ppp1 interface goes down. That's the typical message I get when it goes down. So, when I reboot the router, the script shows the message that the virtual-ppp1 interface is up when the L2TP tunnel comes up. I checked the debugs and that is the behaviour when the tunnel goes up / down...
Here you go:
event manager applet L2TP-DOWN
event syslog pattern "%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-PPP1, changed state to down"
action 1.0 syslog msg "The L2TP VPN is down"
action 1.1 cli command "enable"
action 1.2 cli command "reload in 10" pattern "confirm"
action 1.3 cli command ""
action 1.4 syslog msg "EEM scheduled reload in 10 minutes"
event manager applet L2TP-UP
event syslog pattern "%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-PPP1, changed state to up"
action 1.0 syslog msg "The L2TP VPN is up"
action 1.1 cli command "enable"
action 1.2 cli command "reload cancel"
Thanks. -
Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
My phone no longer chimes when I have a new text message. Or, alternatively, it will chime when I unlock it, even if I received the message hours ago, but won't alert me when I actually receive the message for the first time. My software is updated, and all my notification sounds and alerts are on. Often it registers that there's a text message (there will be a red circle above the app), but the notification never pops up. If I do immediately get an alert, it doesn't complete the chime and my phone flashes but immediately shuts off. Is there some way that I can fix this?
Sorry to know that..
After backing-up your data try a Factory Restore. also check whether the phone Firmware upto date ? You may check using the Nokia Suite .. If not you may update that or if already with the latest Firmware re-install the Firmware and try again .. -
Will I get an alert/notification on my iphone when i first log into icloud control panel on my PC
You can only create the account on a Mac or an IOS device. Then you can use it on your PC.
-
Health Service Heartbeat Failure Alert for Generated when one Management Server Down,
Hi,
I have Two Management Server, every one manage about 100 server, when one Management Server goes down unexpected, I receive 100 Alert for 100 Server Health Service Heartbeat Failure.
My Question, why when the Management Server down, it send that all Managed agent Health Service Heartbeat Failure?
Is there a way to change this?SCOM 2012 agent will autofailover when primary server is down. You can check the failover management server by using the following powershell cmdlet:
#Verify Failover for Agents reporting to MS1
$Agents = Get-SCOMAgent | where {$_.PrimaryManagementServerName -eq 'MS1.DOMAIN.COM'}
$Agents | sort | foreach {
Write-Host "";
"Agent :: " + $_.Name;
"--Primary MS :: " + ($_.GetPrimaryManagementServer()).ComputerName;
$failoverServers = $_.getFailoverManagementServers();
foreach ($managementServer in $failoverServers) {
"--Failover MS :: " + ($managementServer.ComputerName);
Write-Host "";
http://www.systemcentercentral.com/how-does-the-failover-process-work-in-opsmgr-2012-scom-sysctr/ -
Office 365 Outlook Alert Box Notification when an email arrive
Hi,
I use office 365 Professional and i search if i can have a notification like a window to alert me because an email is coming in Outlook 365.
I searched if a plugin for Chrome, Mozilla or Explorer exist to do that but i found nothing to help me.
Thanks in advance if you have an answer.
MarcHi Marc,
As per your description, seems you are referring to the browser version of Outlook for Office 365, not the desktop version of Outlook, correct?
If this is the case, as far as I know, you can display the mail notification by clicking the gear icon, then click options>settings>message options, tick the option of "Display a notification when a new email message arrives".
Please note this is the forum to discuss questions and feedback for Microsoft Office client. Better to post your question in the dedicated forum of
Office 365 community, where you can get more experienced responses:
http://community.office365.com/en-us/f/158.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Alert notification for down light weight access point?
Hello! Is there a way to get a notification when a lightweight access point goes down? I recently introduced WiSM in my wireless LAN and keeping track of the access point status is a challenge.
Thanks in advance!Good to know, I have that and just didn't see a need to install it yet since I have only two controllers. I thought still manageable. Anyway, if it will give me the notification then I will put in production ASAP.
Thank you so much for all the reponses. :) -
Thunderbird does not show a blocked remote content notification bar when content is blocked to allow remote content. The allow remote content box is not enabled in the privacy settings.
Is it always like that? or just from one source?
How are you viewing emails ?
(view / Message Body As) should be ''original html '' -
My Iphone 5s will restart when i was pull down notification.Please tell me how to fix?
My iphone 5s (ios 7.1) will Restart when i was pull down notification.please tell me how to fix
Have you tried to reset the iPhone? ( See: reset your device.)
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo. -
My iPod Touch 4th Gen was running very slow, so after reading a blog, I doings clicked my home button and pressed the red button to stop some apps from running. It made my iPod work relatively faster, but my iMessages didn't seem to be working in the same way as they used to. It no longer alerts me when I have a message, even though I haven't touched my notification settings and my messages are always being automatically deleted. It doesn't even show the number or messages in a red circle anymore, I just have to check my messages by clicking into iMessage instead...
This is really annoying me and I can't save old messages anymore or reply quickly to any! Please help!Perform a Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Maybe you are looking for
-
How do I create an apple ID for my Kid without a Credit Card?
How do I create an Apple ID for my Kid?
-
One moment I was using Firefox the same as I always have. The only difference was that I changed the preferences to erase history when quitting Firefox. When trying to open the program again, it is immediately unresponsive. I attempted opening it in
-
I have a VI where I'm performing various arithmetic calculations to an extended variable of 24 characters. Somehow, however, when I attempt to add a number like 256 to 100,000,000,000,000,000,000,000, it loses it. I've done a little messing around, a
-
Ipad speakers/sound and syncing issues
So my ipad 2 started acting up, first with the sound then with syncing. The sound would not work when I played songs, video or anything else. When I attempted to adjust the volume with the buttons on the side of the ipad the icon on the screen was
-
How to create encrypted HTTP Live Streaming Videos?
Does Compressor4 have any features (or scripts that can be run post-compression) to create encrypted HTTP Live Streaming Videos? It works great for creating UNencrypted ones, but I need to make some encrypted ones also.