Remote control of Mac via Flash iOS app

Hi all
I am a very trial-and-error Flash coder but have managed to create a (I think) pretty serviceable VJ system - see http://www.smashedupsoiree.com/magic-wall/
There are two Flash movies that run concurrently on the same Mac. One is the video content itself which is displayed by a projector; the other is the Controller movie which runs on the mac laptop screen. The two movies communicate by LocalConnection. I have had some success using VNC apps on an ipad which grabs the screen from the Mac and therefore enables this Controller movie to be effectively operated as a touch screen, portable interface. However there are latency issues with VNC - not what you need for a live performance tool!
I am considering instead developing the controller as a packaged-for-ios app to reduce the latency issues. If I do so, does anyone know how it will be able to control the flash movie running on the mac on the same network? (In the vein of these kinds of apps: http://mashable.com/2010/02/28/iphone-remote-control-apps/ )? I have read that Local Connections do not work in Packaged-for-iOS apps. Would I instead use Apple APIs? How is this done via Flash Actionscript? I would want to either control the Mac-based movie like a LocalConnection or even simulating keypresses would be fine, that I can then detect with the Mac Flash movie.
As I mentioned before, I'm no professional coder so the whole matter is a bit blurry to me! Any pointers would be much appreciated...
Gerred

teamviewer is a pretty big player also works across the Internet

Similar Messages

Airplay does not recognise my Pioneer vsx-1122-k on my iPad, I can control my receiver via the pioneer app on my iPad so it is just airplay not a connetivity issue. My Panasonic Stereo is recognised on Airplay.

Since upgrading to the latest IOS, Airplay does not recognise my Pioneer vsx-1122-k on my iPad, I can control my receiver via the pioneer app on my iPad so it is just airplay not a connectivity issue. My Panasonic Stereo is recognised on Airplay.

Hi
I don't know if you're still having this issue but there is a way round it as I'm having the same troubles.
I've just spoken to Apple about it and found out:
– If you have a Mac made before Mid-2011, it doesn't have a piece of hardware needed to take advantage of the 'Airplay mirroring'
– So you can update to a later version 10.6.8+ but this won't help at all
The way round it:
– Download 'Airfoil' and install this
– You can then play music from any defined source (Spotify, Quicktime etc) through your Airplay connected speakers
So sadly, for those have a Mac from before Mid-2011 there's isn't an option that's as easy as Option-click on the sound icon to switch to Airplay speakers.
Hope that helps, I can now get on with the rest of my day now after sorting this out.
Adam

Flash iOS App Languages on iTunes

After publishing my Flash iOS App to iTunes I see huge array of languages, even though my game is only in English. In my descriptor, I only provided an English name and description.
Languages: English, Chinese, Czech, Dutch, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Swedish, Turkish
Is there a way to remove these or add other languages that are not on this list?
I understand its not possible via iTunesConnect its something inside the binary file.

I am working on window 7 - if rename the binary file to ZIP and open it, removing the XX.lproj folders - would that do the trick?
I see the "_CodeSignature/CodeResources" file is also related to the XX.lproj folders
Should i just not tuch it and wait for the fix?
Thanks for your advice.

Remote control iPhone 4 via Windows Laptop/Desktop

Hello,
I was wodnering if there was a way to remotely control my iPhone via my Windows Laptop? My speaker system is across the room which is hooked up to my iPhone, so everytime I want to change to a specific song or skip a song, I would have to get up and manually change it.
I have seen apps in the store that allow you use the iPhone control another apple device, or use your iPhone as the remote. However in this case, I want to use my computer as the remote.
Anyone have any ideas or tips? Thanks in advance.

Gave it a look, tried all the troubleshooting. My IP addresses are the same, so now I really don't understand. I'm just super confused. If it hadn't ever worked, I would just write it off as my university network being too strict... but now that it has worked once and really... nothing changed... I am just very confused.

Remotely Controlling A Mac From A PC

How can someone remotely control a Mac from a PC?
What would need to be set to allow a PC access?

If you have enabled remote access (ssh) and you have configure your router to allow incoming ssh connections to your mac then you could access your mac via a terminal something like Putty on your pc and turn on screen sharing via the terminal.
10.5: Start screen sharing remotely in Terminal
You could install vine server on your mac, and again that could be lauched via an ssh connection.

Remote Control another Mac?

I've tried to read up on this but couldn't quite grasp how to set it up properly, if anyone could offer any help?
I would like to use a Mac to control another Mac via the internet - i.e. by remote means.
The purpose is to demonstrate how to do something to another person, for instance, by moving the mouse on their screen to load iTunes or something similar - to show how to do simple procedures.

There are several, VNC client/servers like Chicken of the VNC, Timbuktu and logmein.com
http://cotvnc.sourceforge.net
http://www.netopia.com/software/products/tb2/
http://logmein.com

How to add a photo to a pdf form via the iOS app

How do I add a photo to a pdf form via the iOS app? I need to fill out a form for work using field observations and photos. I can easily fill out the text portions of the form but I'm unable to add the photos from my phone. Is this possible?

Does the form have a provision to insert images (e.g. a Browse button)?
[topic moved to iOS subforum]

HT1941 how do i remote control my mac mini from my macbook air

I want to control my iTunes library from my mac air. How do I setup the remote control to accomplish this?

1. Use the Remote App on iDevices. There are third-party apps also available.
2. Use Screen Sharing on the MBAir.
3. More elaborate solutions using the IR Remote and IR Blasters are also possible.
4. AirParrot and Beamer may also provide some capabilities.
5. AirPlay requires ATV and a Mac.

Remote control a Mac server from Windows machines

I'm running a Mavericks Server that I'd like to get off my desk and put in the data center. However, my primary laptop is a Windows 8.1 laptop that I use to support other things. I'd still like the ability to remote into the Mac Server from my Windows laptop. I know that I can VNC into the server, but it's my understanding that if I have Remote Management turned on, I can't have Screen Sharing (and thus, VNC) turned on. So it seems like my options are to run another VNC server on a different port or use LogMeIn Ignition. But I'm not sure what other people are using so I'd like your help. Thoughts? Suggestions?
TIA

As you have found via the answer provided by Morgan R, it is possible to configure Remote Management to allow standard VNC clients to connect just like it is possible with Screen Sharing.
Note: Remote Management does everything Screen Sharing does plug other things. So anything you can do via Screen Sharing you can do via Remote Management.
However there is a client available for Windows that does support the extended login information used by Remote Management/Screen Sharing, this is 'Remotix' by Nulana.
See http://www.nulana.com/remotix-windows/
I have tried it and it does work. I did however find one serious bug which I have reported to them but I don't know if they have fixed it yet.
Over the years I have found many in fact nearly all software that involves linking Mac and Windows where one controls the other in either direction has suffered an inexcusable bug whereby if you are not using US keyboards at both ends then several keys will not be mapped properly and you can even end up with some keys not usable at all. The most infamous combination is the @ and " keys being swapped.
All these programs appear to have been written by Americans who are members of the 'flat earth' society and obviously believe that if you leave the shores of the USA you will fall of the edge of the world. I presume they also are avid fans of the Discworld series of books.
Offenders include Virtual PC, Microsoft Remote Desktop Client 1.0 (for Mac), Timbkutu Pro, Remotix and I am sure many others.
Note: Microsoft did at least fix theirs several years later with Remote Desktop Client 2.0 (for Mac).
The one noteable exception is VNC. VNC was originally developed at AT&T Laboratories in Cambridge, England. (Not New England.)
See http://www.cl.cam.ac.uk/research/dtg/attarchive/vnc/ I am sure if it had been developed in Cambridge, Massachusetts it would have suffered the same problem. Since Screen Sharing on Macs is based on VNC it has never suffered this problem even when controlling a PC via VNC. I am therefore even more shocked that Nulana managed to make this mistake.
To our dear American friends in the colonies, you might want to read http://uk.ask.com/question/who-discovered-that-the-earth-was-round

How to remotely control my Mac at home?

I'm at work on a Mac Pro.
I want to control my iMac at home.
Both of the Macs are running OS Lion (10.7.5).
I just bought Apple Remote Desktop software.
How do I connect & control my Mac at home?
Thanks,
Wayne

You need something different since Remote Desktop only works on the same network. You were not clear.
You need one of these:
Set up and use Back to My Mac - Apple Support
Commercial products like
TeamViewer, free for non-commercial use
LogMeIn
GoToMyPC

How do I submit a Flash iOS App from Windows?

Hi,
How do I upload an iOS app to the appstore on Windows? I can't get a mac at this moment, so this would be very useful.
Thanks

there is a service that charges 20$ per upload. apple links to it somewhere in his appledeveloper pages.

ATV-3. Very slow to download tv shows from iTunes via wi-fi and ATV-3 remote controls partners Mac book pro.....

Hi, received ATV-3 today. Plugged in and all seems to work. Went to wath. 30 minute tv show from my iTunes library via wi- fi bu told 48 minutes till ready. Wi fi works well and quick with any other applications.... Strong signal.
Also the ATV3 is controlling my partners MacBook pro. Her home haring is off nd it is not visible in Bluetooth menu. What's going on?

Hi, received ATV-3 today. Plugged in and all seems to work. Went to watch 30 minute tv show from my iTunes library via wi- fi but told 48 minutes till ready. Wi fi works well and quick with any other applications.... Strong signal.
Also the ATV3 is controlling my partners MacBook pro. Her home sharing is off and it is not visible in Bluetooth menu. What's going on?
Spell check now done;)

Error 500 from Microsoft Remote Desktop for Mac and for iOS but not for Windows

I am running Windows Server Standard 2012 as a basic File server and Remote Access Server. I am able to log into to Server remotely using Windows Remote Desktop Client on Windows 7 and 8 machines without problems
When I try to log in using outside the local network using MRD version 8.0.24308 using OS X 10.9.1 or using iOS 7.0.4, I get the following error:
" The gateway failed to connect with the message: 500 Internal Server Error"
I can also log in remotely WITHIN the local network on a Mac or iOS device, it works without getting an error
Any Ideas?

My IT person has tried all these and I still get a 500 error when I log in from Microsoft Remote Desktop 8.5.
Here is part of the MRD log dump (not clear where to send the log since MRD doesn't provide an address when you dump the log into email):
[2014-Mar-27 19:48:56] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-27 19:48:56] RDP (0): lo0 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-27 19:48:56] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-27 19:48:56] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:48:56] RDP (0): gif0 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): stf0 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): en0 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): en1 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:48:56] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.89 netmask=255.255.255.0
[2014-Mar-27 19:48:56] RDP (0): fw0 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): p2p0 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): utun0 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::e1eb:119:5ad9:da9%utun0
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:48:56] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:e1eb:119:5ad9:da9
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:48:56] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-27 19:48:56] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Mar-27 19:48:56] RDP (0): client version: 8.0.24428
[2014-Mar-27 19:48:56] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-27 19:48:56] RDP (0): Resolved '10.1.10.11' to '10.1.10.11' using NameResolveMethod_DNS(1)
[2014-Mar-27 19:49:04] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-27 19:49:04] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Mar-27 19:49:04] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-27 19:49:04] RDP (0): lo0 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-27 19:49:04] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-27 19:49:04] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:49:04] RDP (0): gif0 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): stf0 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): en0 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): en1 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:49:04] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.89 netmask=255.255.255.0
[2014-Mar-27 19:49:04] RDP (0): fw0 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): p2p0 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): utun0 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::e1eb:119:5ad9:da9%utun0
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:49:04] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:e1eb:119:5ad9:da9
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:49:04] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-27 19:49:04] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Mar-27 19:49:04] RDP (0): client version: 8.0.24428
[2014-Mar-27 19:49:05] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-27 19:49:05] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
[2014-Mar-27 19:49:05] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
[2014-Mar-27 19:49:07] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message:
500 Internal Server Error
[2014-Mar-27 19:49:07] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message:
500 Internal Server Error
[2014-Mar-27 19:49:07] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Mar-27 19:49:07] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-27 19:49:07] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Mar-27 19:49:15] RDP (0): *** Application terminated ***
[2014-Mar-29 12:03:43] RDP (0): Final rdp configuration used: gatewayhostname:s:javpeds.com
screen mode id:i:2
use multimon:i:0
session bpp:i:24
full address:s:10.1.10.11
audiomode:i:2
username:s:javpeds\ptraquair
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:'SF Cartoonist Hand';font-size:18px;line-height:normal;" />bookmarktype:i:3
use redirection server name:i:0
[2014-Mar-29 12:03:43] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-29 12:03:43] RDP (0): lo0 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-29 12:03:43] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-29 12:03:43] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:43] RDP (0): gif0 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): stf0 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): en0 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): en1 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:43] RDP (0): en1 af=2 (AF_INET)  addr=192.168.1.29 netmask=255.255.255.0
[2014-Mar-29 12:03:43] RDP (0): fw0 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): p2p0 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): utun0 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::c852:1a8d:126a:a88a%utun0
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:43] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:c852:1a8d:126a:a88a
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:43] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-29 12:03:43] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Mar-29 12:03:43] RDP (0): client version: 8.0.24428
[2014-Mar-29 12:03:44] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-29 12:03:44] RDP (0): Resolved '10.1.10.11' to '10.1.10.11' using NameResolveMethod_DNS(1)
[2014-Mar-29 12:03:52] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-29 12:03:52] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Mar-29 12:03:52] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-29 12:03:52] RDP (0): lo0 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-29 12:03:52] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-29 12:03:52] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:52] RDP (0): gif0 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): stf0 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): en0 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): en1 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:52] RDP (0): en1 af=2 (AF_INET)  addr=192.168.1.29 netmask=255.255.255.0
[2014-Mar-29 12:03:52] RDP (0): fw0 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): p2p0 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): utun0 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::c852:1a8d:126a:a88a%utun0
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:52] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:c852:1a8d:126a:a88a
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:52] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-29 12:03:52] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Mar-29 12:03:52] RDP (0): client version: 8.0.24428
[2014-Mar-29 12:03:52] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-29 12:03:52] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
[2014-Mar-29 12:03:52] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
[2014-Mar-29 12:03:53] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message:
500 Internal Server Error
[2014-Mar-29 12:03:53] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message:
500 Internal Server Error
[2014-Mar-29 12:03:53] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Mar-29 12:03:53] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-29 12:03:53] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Mar-29 12:04:24] RDP (0): *** Application terminated ***
[2014-Mar-29 12:53:47] RDP (0): Final rdp configuration used: gatewayhostname:s:javpeds.com
screen mode id:i:2
use multimon:i:0
session bpp:i:24
full address:s:10.1.10.11
audiomode:i:2
username:s:javpeds\ptraquair
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:'SF Cartoonist Hand';font-size:18px;line-height:normal;" />bookmarktype:i:3
use redirection server name:i:0
[2014-Mar-29 12:53:47] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-29 12:53:47] RDP (0): lo0 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-29 12:53:47] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-29 12:53:47] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:47] RDP (0): gif0 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): stf0 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): en0 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): en1 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:47] RDP (0): en1 af=2 (AF_INET)  addr=10.59.1.176 netmask=255.255.255.0
[2014-Mar-29 12:53:47] RDP (0): fw0 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): p2p0 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): utun0 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::e590:f4:e6f3:79ee%utun0
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:47] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:e590:f4:e6f3:79ee
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:47] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-29 12:53:47] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Mar-29 12:53:47] RDP (0): client version: 8.0.24428
[2014-Mar-29 12:53:47] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-29 12:53:47] RDP (0): Resolved '10.1.10.11' to '10.1.10.11' using NameResolveMethod_DNS(1)
[2014-Mar-29 12:53:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-29 12:53:55] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Mar-29 12:53:55] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-29 12:53:55] RDP (0): lo0 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-29 12:53:55] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-29 12:53:55] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:55] RDP (0): gif0 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): stf0 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): en0 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): en1 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:55] RDP (0): en1 af=2 (AF_INET)  addr=10.59.1.176 netmask=255.255.255.0
[2014-Mar-29 12:53:55] RDP (0): fw0 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): p2p0 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): utun0 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::e590:f4:e6f3:79ee%utun0
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:55] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:e590:f4:e6f3:79ee
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:55] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-29 12:53:55] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Mar-29 12:53:55] RDP (0): client version: 8.0.24428
[2014-Mar-29 12:53:55] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-29 12:53:55] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
[2014-Mar-29 12:53:55] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
[2014-Mar-29 12:53:56] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message:
500 Internal Server Error
[2014-Mar-29 12:53:56] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message:
500 Internal Server Error
[2014-Mar-29 12:53:56] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Mar-29 12:53:56] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-29 12:53:56] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Mar-29 12:54:05] RDP (0): *** Application terminated ***

Does the iPhone Remote control a Mac mini in the same way as ATV?

My ATV1 has packed in.
Rather than having my MBP switched on just to listen to music through a new ATV to my hifi I am thinking of using a Mac Mini in the same way as ATV1.
Does the iPhone Remote work with the Mini the same way as it does with the ATV or do you need to use a mouse and switch on the screen?

If intending to use the Mini s a home theater system,
you may want to consider getting Rowmote or Rowmote Pro
app for the iPhone and the companion app for the Mac.
Not only will you get Apple Remote functionality, but
you will also get trackpad and keyboard functionality
as well. This will make it even easier to navigate the
Mini on the TV.

Flash iOS app to client's licence?

I have created an app in Flash CC/AIR and previewed it to the client using my own Apple Developers licence. How can I configure and supply the .ipa file so he can then distribute it to his sales team using his company's Enterprise licence?

Apple have two types of programs:
1) Enterprise - it's allows to distribute your app only directly (without uploading to AppStore). Just give IPA to the clients.
2) Developer - allows to distribute only via AppStore.
Booth allow use AdHoc for testing purpose only.
In case 2. - you must request provisioning profile and certifictes exactly for AppStore market distribution. Not development and etc. Than generate as usual your IPA with "AppStore market" compiling option.
For example here it's Final Release http://devgirl.org/wp-content/uploads/2011/06/Screen-shot-2011-06-15-at-12.09.32-PM.png radiobutton.
After you recive final IPA you need (or your client must do this) upload IPA from MacOS using Application Loader to own Developer account for moderator review and wait.
In case 1 - do the same as in case 2 but don't use Application Loader. Just give IPA to your client.
P.S. Also target your iPA with new Adobe Air that was release day ago http://www.adobe.com/devnet/air/air-sdk-download.html so you will be sure it's will not have any ios7 issues.

Remote control of Mac via Flash iOS app

Similar Messages

Maybe you are looking for