Remote debugging - can't debug subVIs [LV 8, Win XP]

I've successfully built one app and debugged it at a remote location. I'm trying to do the same with a different app and it won't let me debug anything but the main VI. With my first app I could open subVIs on my develpoment PC and they would be connected to the remote executable. When I open subVIs with my second app they don't get connected to the remote app (they show "My computer" in the lower left and they're not running). Has anybody run into this?
George

I'm guessing both my problems are related to a developer install of 4.2. Apparently there is no way to get it back on the current OS without manually installing it. I am doing that now and predict everything will be fine afterward.
I'm sure somehow this is technically my fault but I am surprised that iTunes would report that an ancient version of the OS is the most up-to-date version.
Thanks everyone!
M.

Similar Messages

How can I enable remote debug in weblogic to use with Rational RSA IDE?

How can I enable the remote debugging technique so that I can work with my IDE.
I use RSA by IBM as the IDE
What should be the changes in the setdomainenv or startweblogic?
I use 10.3
Please help.. ur help is appreciable...

Hi,
I did not make any console adjustments for debugging on my WebLogic 10.3.2.0 - however I am running in development mode on an "adminServer" (an option during the install)
In the console there is a debug setup page - that seems to have no effect for me (I can always debug) - so either it is a combination of development mode and/or the startWeblogic script from the Eclipse plugin.
However, these debug settings are likely for debugging into the server - you only want to debug your own app code right?
On the console page goto
http://localhost:7001/console/console.portal?_nfpb=true&_pageLabel=ServerDebugPage
servers | AdminServer | configuration-debug | expand weblogic
I see...
"Use this page to define debug settings for this server.
Debug settings for this Server
EnableDisableClear Showing 1 to 2 of 2 Previous Next
Debug Scopes and Attributes State
default Disabled
weblogic Disabled
EnableDisableClear Showing 1 to 2 of 2 Previous Next
Try expanding the whole tree and selecting the root to enable everything.
You will see the following
10-Dec-2009 11:53:46 o'clock AM EST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute DebugAbbreviation on weblogic.management.configuration.ServerDebugMBeanImpl@47a32e1b([base_domain]/Servers[AdminServer]/ServerDebug[AdminServer]) has been changed. This may require redeploying or rebooting configured entities>
<10-Dec-2009 11:53:46 o'clock AM EST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server AdminServer. This server must be rebooted in order to consume this change.>
<10-Dec-2009 11:53:46 o'clock AM EST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=ServerDebugPage.>
When I debug WebLogic 10.3.2.0 from Eclipse 3.5 EE - I see the following in my server startup log which includes the "-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453" you mentioned.
Starting WLS with line:
c:\opt\wls10320\JROCKI~1.5-3\bin\java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\opt\wls10320\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=C:\opt\wls10320\WLSERV~1.3 -Dwls.home=C:\opt\wls10320\WLSERV~1.3\server -Dweblogic.home=C:\opt\wls10320\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=c:\opt\wls10320\patch_wls1032\profiles\default\sysext_manifest_classpath weblogic.Server
Listening for transport dt_socket at address: 8453
The server process listening on debug portl 8453 ooks like this
Oracle WebLogic Server 11gR1 PatchSet 1 at localhost [Oracle WebLogic Launch Configuration]
     BEA JRockit(R)[localhost:8453]
          Thread [Main Thread] (Running)
          Daemon Thread [Timer-0] (Running)
          Daemon Thread [Timer-1] (Running)
          Daemon Thread [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] (Running)
          Daemon Thread [weblogic.time.TimeEventGenerator] (Running)
          Daemon Thread [JMAPI event thread] (Running)
          Daemon Thread [weblogic.timers.TimerThread] (Running)
          Daemon Thread [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] (Running)
          Daemon Thread [Thread-7] (Running)
          Daemon Thread [ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'] (Running)
          Daemon Thread [ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'] (Running)
I hit a breakpoint and see
Daemon Thread [[ACTIVE] ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] (Suspended (breakpoint at line 56 in ApplicationService))
     ApplicationService_5ptwty_Impl(ApplicationService).insertObjects(List<Cell>) line: 56
     NativeMethodAccessorImpl.invoke0(Method, Object, Object[]) line: not available [native method]
     NativeMethodAccessorImpl.invoke(Object, Object[]) line: 39
     DelegatingMethodAccessorImpl.invoke(Object, Object[]) line: 25
     Method.invoke(Object, Object...) line: 597
     AopUtils.invokeJoinpointUsingReflection(Object, Method, Object[]) line: 310
     ReflectiveMethodInvocation.invokeJoinpoint() line: 182
     ReflectiveMethodInvocation.proceed() line: 149
     DelegatingIntroductionInterceptor.doProceed(MethodInvocation) line: 131
     DelegatingIntroductionInterceptor.invoke(MethodInvocation) line: 119
     ReflectiveMethodInvocation.proceed() line: 171
     MethodInvocationVisitorImpl.visit() line: 37
     EnvironmentInterceptorCallbackImpl.callback(MethodInvocationVisitor) line: 55
     EnvironmentInterceptor.invoke(MethodInvocation) line: 50
     ReflectiveMethodInvocation.proceed() line: 171
     ExposeInvocationInterceptor.invoke(MethodInvocation) line: 89
     ReflectiveMethodInvocation.proceed() line: 171
     DelegatingIntroductionInterceptor.doProceed(MethodInvocation) line: 131
     DelegatingIntroductionInterceptor.invoke(MethodInvocation) line: 119
     ReflectiveMethodInvocation.proceed() line: 171
     JdkDynamicAopProxy.invoke(Object, Method, Object[]) line: 204
     $Proxy68.insertObjects(List) line: not available
     ApplicationService_5ptwty_ApplicationServiceLocalImpl.insertObjects(List<Cell>) line: 306
     FrontController.generateGlider(PrintWriter) line: 240
thank you
/michael
http://www.eclipselink.org

Can'n attach to JVM using remote debug

Hello!
I have some problem. I have create a JVM in C++ program usin JNI. Parameters (reat from conf file):
-Xdebug
-Xnoagent
-Djava.compiler=NONE
-Xrunjdwp:transport=dt_socket,server=y,address=5007,suspend=n
-Djava.class.path=jar_1;jar_2;...;jar_n
JVM is created successfullly. Then I try attach to JVM from IDEA by remote debug with parameters:
-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5007
After this I have get the next error: "Unable to open debugger port: java.net.SocketException Connection reset". And my program is shut down. I can't solve this problem. Maybe anybody have some ideas. Thanks.

Try to debug the next java cod:
public class TestClass {
public static void FileCrt(String str)
DataOutputStream OutStream;
String sOut;
sOut = new String(str);
try
OutStream = new DataOutputStream( new BufferedOutputStream(new FileOutputStream("c:\\output.txt")));
OutStream.writeBytes(sOut);
OutStream.close();
catch (IOException e)
e.printStackTrace();
public static void main(String[] args)
FileCrt("Test");
I have created the test.jar and run it by the command:
java -cp test.jar -Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,address=8787,suspend=y testpackage.TestClass
Then I try to connect to JVM by remote debuger (-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=8787) and get exception "Unable to open debugger port java.net.ConnectException". What's the problem?

Remote debug instructions. can't find Toolbox, hence no settings, hence no enable remote, FF34.0.5

FF34.0.5
https://developer.mozilla.org/en-US/docs/Tools/Remote_Debugging/Firefox_for_Android
instructions lead me to no "Toolbox". Can't find.
Developer toolbar has "Tools" but no "Settings therein.
Tools>Edit Tools &/or Options>options not appropriate.

Thanx - I will try that wheeze, it may work on FF Portable 34.
in desperation I installed Firefox Developer edition because I was using Firefox Portable (34.0.5) as my main development engine on sticks & fast external HDDs..
Hmmmmmmm
Let us just say that the Developer Edition can't give me working breakpoints (within functions) on my 600 line JavaScript, locally. When connected to the internet and running similar pages on the web I get erratic breaks where no breakpoints exist. Maybe it can't handle the other 500 code lines ( a lexicon) and it has exceeded some limit that was not there before. eg http://stroudvoices.co.uk/c/
The original problem was to do remote debugging on an Android phone. That failed completely. Worse - I can't run my pages on Chrome/Android now because FF/Android was defaulted and after removing that default Chrome is no longer offered.
Looks like I have to abandon all updates on Portable Firefox as a precaution. That at least behaves as a debugging environ. Or make IE &/or Chrome as my preferred SDK. I am not looking forward to future "improvements".

Can i run remote memory profiling and remote debugging at the same time .

can i run remote memory profiling and remote debugging at the same time .
i am using jdev9.0.5 and oc4j9.0.4 standalone server.
how to write the batch file to run both at the same time

Thanks for your help!
Another question. How do you turn off the ATT wireless transmitter? Also, there are more computers connected to the 2Wire network. I will have to set up a wireless pc to work with the Base Station after disconnecting the ATT transmitter. Easy answers for both, I hope?

Can i run remote profiling and remote debugging at the same time

can i run remote profiling and remote debugging at the same time .
i am using jdev9.0.5 and oc4j9.0.4 standalone server.

i think i am wrong

Can't remote debug appliaction with jdeveloper10.1.3 deployed in JBoss 4.2

can't remote debug appliaction with jdeveloper10.1.3 deployed in JBoss 4.2.2
when i try to debugg with old version like jboss-4.0.3SP1 it is workking good
but when i'm try to debugg with jboss-4.2.2.GA and add project newly libaray jboss client jars of this version i got error
Exception in thread "main" java.lang.NoClassDefFoundError: in
and the debugger stoped in URLClassLoader and throw NoClassDefFoundError exception, i think the reason is the client jars
which jars should i add to project libarary to success remotely debugg application in jboss 4.2.2 GA ?

Remote debugging with JBoss 4.2 is the same as for 4.0.
http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3?topic=rem_p_servlet_general_html

Linux remote debug - can't load jdwp helper lib

Running RedHat 7.1 and jetty web server with jdk 1.3.1_09(?) (and ultimately trying to do a remote
debug from a Windows Eclipse machine).
Running jetty with cmd line args:
-Xmx256m -Xnoagent -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000 -Djava.compiler=NONE
linux says:
unable to configure JVMDI events
unable to initialize JVM helper library jdwp
loadJVMHelperLib failed
could not create the Java virtual machine
The linux jdk has /bin/libjdwp.so and /bin/libjdwp_g.so

silly me: I forgot the -Xdebug option. Now it works. Never mind.

Remote debugging an executable with dynamically loaded subpanel VIs

All,
A colleague of mine is attempting to perform remote debugging of an executable he has inherited. It includes subpanels that show dynamically loaded VIs. When connecting with the remote debugger, the main executable shows fine, but the dynamically loaded VIs are not showing their front panels. They appear ok on the remote PC where the executable is running, but they don't appear on his laptop from where he is running the debugger.
I don't have access to LabVIEW currently, and he cannot get this to work, so I thought I'd ask the community this generic question:
"Is it possible to remotely debug a LabVIEW executable with subpanels that show dynamically loaded subVIs?"
Technically he can see and probe the block diagram of the main executable, but the subpanels are blank where the dynamcally loaded subVI front panel should show, making it impossible to interact with the program.
Thoric (CLA, CLED, CTD and LabVIEW Champion)

Thanks Josh. Does this issue have a CAR number I can tag?
Thoric (CLA, CLED, CTD and LabVIEW Champion)

How to enable remote debugging for a session other than the current one

Hi all,
I am trying to figure out how to enable remote debugging for a session other than the one I am currently using.
More specifically, we have an application that is making database calls to Oracle 11gR2. Something is causing an exception during this invocation. My system is currently not set up to recompile said application, so I can't just add the debug call to the code and recompile. Therefore I would like to be able to log into the database (as sys, if necessary) and invoke dbms_debug_jdwp.connect_tcp on the desired session.
The docs indicate that I should be able to do so:
dbms_debug_jdwp.connect_tcp(
host IN VARCHAR2,
port IN VARCHAR2,
session_id IN PLS_INTEGER := NULL,
session_serial IN PLS_INTEGER := NULL,
debug_role IN VARCHAR2 := NULL,
debug_role_pwd IN VARCHAR2 := NULL,
option_flags IN PLS_INTEGER := 0,
extensions_cmd_set IN PLS_INTEGER := 128);
But when I try (even as sys), I get the following:
exec dbms_debug_jdwp.connect_tcp('1.2.3.4',5678,<session id>,<session serial>);ORA-00022: invalid session ID; access denied
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
00022. 00000 - "invalid session ID; access denied"
*Cause: Either the session specified does not exist or the caller
does not have the privilege to access it.
*Action: Specify a valid session ID that you have privilege to access,
that is either you own it or you have the CHANGE_USER privilege.
I've tried granting the 'BECOME USER' privilege for the relevant users, but that didn't help. I read something about having to set some kind of ACL as of 11gR1, but the reference documentation was very confusing.
Would someone be able to point me in the right direction? Is this even possible, or did I misread the documentation?

Interesting deduction, that would be very useful indeed. I hate recompiling just to add the debug call, and it can't be done in our production environment. But it seems unlikely to me it would be implemented this way.
I would cross-post this in the SQL AND PL/SQL forum though, as this is really a database issue, not with the SQL Developer tool. Do add the links to the other posts in each.
Regards,
K.

(PC and Surface 8.1)bad pool header error: remote debugging using ARM device

Tools used:
Microsoft Visual Studio Professional 2013
Remote Debugger Monitor (Surface RT 8.1)
I have successfully activated the developer license as administrator.
I have attempted to run the test app on remote device but my pc crashes before or when reaching certification.
So far, I have attempted to run an app software for the ARM device; however, ever since I have upgraded the surface to 8.1, I constantly get the bad pool header crash, even after successfully connecting the pc to rt device.
is there any way I can resolve the issue so I can successfully to remote debugging?
any help is appreciated.

Hi,
Considering that the issue should be related to Windows RT 8.1, and Since we have limited testing environment, I suggest you submit a new case on Windows RT forum as they will be more professional on your issue:
This is the Windows RT 8.1 forum link.
http://answers.microsoft.com/en-us/windows/forum/windowsrt8_1?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1392101458999
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Kelvin hsu
TechNet Community Support

Cannot remote debug from JDev 10.1.3 on AS 10.1.2 running hotspot

Hi,
I've set up an embedded OC4J instance in an application server as described in the help topic, "Remote Debugging in OC4J" (with a few changes, such as the fact that I added startup options using the OC4J instance Admin page of EM, rather than at the command line (since the instance is embedded in a full AS). I followed the directions specifically for HotSpot, because that's the JVM the instance was set up to use, and I can't change it (I know OJVM enables lots more features, but that's the situation I'm in).
I've also configured my project for remote debugging, ensuring the host name and port matches, and trying both "Attach to JDPA" and "Attach to OJVM" (these being the only two options, except for starting a listener, which I don't think will help with a web application).
When I try to debug, though, I get:
Debugger unable to connect to remote process.
Should I be doing something differently?
Thanks much,
Avrom

I had the delete key quit working after accidentally pressing a key sequent that included the delete key. I don't know what keys were involved, but the delete key from that point on did nothing.
I am running JDeveloper 10.1.3.0.4 on Window XP.
To resolve the problem, I set the keyboard Accelerators back to 'Default' in JDeveloper.
I selected... Tools->Preferences->Accelerators
then click on 'Load preset' then I chose 'Default'
You may need to select something other than default for your platform, but that did the trick for me.

How to start listener in sql developer for remote debug

how to start listener in sql developer for remote debug ? Since the new version 1.1.0.23 is different with the old version for remote debug, I don't know how to start the listener on the new version for remote debug.
even follow the user guide below and not work . Experts on sql developer please help me with this.
Remote Debugging
To debug a procedure or function for a connection where the database is on a different host than the one on which you are
running SQL Developer, you can perform remote debugging.
Remote debugging involves many of the steps as for local debugging; however, do the
following before you start the remote debugging: Use an Oracle client such as SQL*Plus to issue the debugger connection command. Whatever
client you use, make sure that the session which issues the debugger connection commands is the same session which executes your PL/SQL
program containing the breakpoints.
For example, if the name of the remote system is remote1, use the following SQL*Plus command to open a
TCP/IP connection to that system and the port for the JDWP session:
EXEC DBMS_DEBUG_JDWP.CONNECT_TCP('remote1', '4000'); The first parameter
is the IP address or host name of the remote system, and the second parameter is the port number on that remote system on which the debugger
is listening.
Right-click the connection for the remote database, select Remote Debug, and complete the information in the Debugger - Attach
to JPDA dialog box. Then, follow the steps that you would for local debugging (for example, see Debugging a PL/SQL Procedure).
Debugger - Attach to JPDA This dialog box is displayed when you right-click a database connection name and select Remote Debug.
Use this
dialog box if you are using the Sun Microsystem's Java Platform Debugger Architecture (JPDA) and you would like the debugger to listen so
that a debuggee can attach to the debugger.
For more information about remote debugging, see Remote Debugging.
Host: Name or IP address of
the remote host on which SQL Developer should listen for the database to connect.
Port: Listening port number on the remote host. You can
choose any valid port number that is not in use by another process.
Timeout: The number of seconds that SQL Developer will wait for the
remote database to make a debugging connection. Don't Show Dialog Box Before Connecting: If this option is checked, this dialog box will not
be displayed before future connections for remote debugging

You're not the only one:
Not able to start remote debug listener
Re: remote debug question at version 1.1.0.23 64

Remote Debug mode while starting Weblogic server using my eclipse plugin

Hi
When am starting the Weblogic server via my eclipse it is opening in Remote Debug mode. Can anyone tell me how do I change the preferences/configure so that it doesnt run in debug mode.
NOTE:I have deployed the application and ran number of times, till yesterday it wasn't starting in this mode, though I haven't changed any settings since then, it is starting in Remote Debug mode.
Thanks,

The above issue is resolved by adding this to setDomainEnv.sh :
ALTERNATE_TYPES_DIRECTORY="${WLPORTAL_HOME}/portal/lib/security"
export ALTERNATE_TYPES_DIRECTORY
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.alternateTypesDirectory=${ALTERNATE_TYPES_DIRECTORY}"
# weblogic extension directories (system jars)
if [ "${WEBLOGIC_EXTENSION_DIRS}" != "" ] ; then
WEBLOGIC_EXTENSION_DIRS="${WEBLOGIC_EXTENSION_DIRS}${CLASSPATHSEP}${WLPORTAL_HOME}/p13n/lib/system"
export WEBLOGIC_EXTENSION_DIRS
else
WEBLOGIC_EXTENSION_DIRS="${WLPORTAL_HOME}/p13n/lib/system"
export WEBLOGIC_EXTENSION_DIRS
fi
WEBLOGIC_EXTENSION_DIRS="${WEBLOGIC_EXTENSION_DIRS}${CLASSPATHSEP}${WLPORTAL_HOME}/light-portal/lib/system${CLASSPATHSEP}${WLPORTAL_HOME}/portal/lib/system${
CLASSPATHSEP}${WLPORTAL_HOME}/info-mgmt/lib/system${CLASSPATHSEP}${WLPORTAL_HOME}/analytics/lib/system${CLASSPATHSEP}${WLPORTAL_HOME}/apps/lib/system${CLASSP
ATHSEP}${WLPORTAL_HOME}/info-mgmt/deprecated/lib/system"
export WEBLOGIC_EXTENSION_DIRS
WEBLOGIC_EXTENSION_DIRS="${WEBLOGIC_EXTENSION_DIRS}${CLASSPATHSEP}${WLPORTAL_HOME}/content-mgmt/lib/system"
export WEBLOGIC_EXTENSION_DIRS
if [ "${WEBLOGIC_EXTENSION_DIRS}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.ext.dirs=${WEBLOGIC_EXTENSION_DIRS}"
export JAVA_OPTIONS
fi

Advantages of using Oracle JVM over JPDA for Remote Debugging?

What are the "additional features" that the documentation hints at when using the Oracle JVM for remote debugging vs. the JPDA protocoL? Can a member of the JDEV briefly address this? What exactly am I losing when using JPDA?

I am not getting anywhere with 'NCOMPing' the stuff. Attempts to NCOMP keeps erroring out . The first of the errors is
'Error while determining classes contained in jsch-1.29_minimalClassListAndTCD
mper.java
Exception oracle.aurora.sqljdecl.ParseException: Encountered "-" at line 14
column 18.
Was expecting one of:
"extends" ...
"implements" ...
The following operations failed
jsch-0.1.29_minimalClassListAndTCDumper.java: creation
exiting : Failures occurred during processing
Kuassi, I have looked at a few of your posts where you make mention of a file titled 'Settings_os.properties'. I see no such file in my Oracle installation. What am I missing here ?

Remote debugging - can't debug subVIs [LV 8, Win XP]

Similar Messages

Maybe you are looking for