Remote faxing error - A fax number was not provided.

I have a USRobotics 5637 Fax / Modem attached to a Mac Mini. I can send and receive faxes on the Mini.
I have enabled printer sharing on the Mini. User rights are everyone is allowed to print. When I try to print to the shared fax from my MacBook Air, The Mini does not send the fax. CUPS provides this error:
USB_Modem-153
Unknown
Withheld
18k
Unknown
completed at
Mon Aug 12 16:36:37 2013
"A fax number was not provided."
So the MacBook Air sees the Fax on the Mini and the job gets sent to the Mini but the fax number apparently does not get sent to the print server. Both machines are running 10.8.4 and are connected to the same (hardwired) network.
Is there something I am missing. I type the fax number in on the Air and I have tried various formats (xxx-xxxx, (xxx) xxx-xxxx, xxxxxxx etc) just to see if this makes a difference but no luck.
I have attached the CUPS log file below: There is the USR fax/modem as well as a Brother MFC printer configured.
Any suggestions?
Thank you
D [12/Aug/2013:16:59:29 -0300] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [12/Aug/2013:16:59:56 -0300] [Client 21] Accepted from 192.168.1.20:631 (IPv4)
D [12/Aug/2013:16:59:56 -0300] Report: clients=1
D [12/Aug/2013:16:59:56 -0300] Report: jobs=147
D [12/Aug/2013:16:59:56 -0300] Report: jobs-active=0
D [12/Aug/2013:16:59:56 -0300] Report: printers=2
D [12/Aug/2013:16:59:56 -0300] Report: stringpool-string-count=4968
D [12/Aug/2013:16:59:56 -0300] Report: stringpool-alloc-bytes=10648
D [12/Aug/2013:16:59:56 -0300] Report: stringpool-total-bytes=67184
D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Get-Printer-Attributes 1
D [12/Aug/2013:16:59:56 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Validate-Job 2
D [12/Aug/2013:16:59:56 -0300] Validate-Job ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Validate-Job (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [12/Aug/2013:16:59:56 -0300] [Client 22] Accepted from 192.168.1.20:631 (IPv4)
D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Aug/2013:16:59:56 -0300] [Client 22] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Create-Job 3
D [12/Aug/2013:16:59:56 -0300] Create-Job ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [12/Aug/2013:16:59:56 -0300] add_job: requesting-user-name="ufa"
D [12/Aug/2013:16:59:56 -0300] Adding default job-sheets values "none,none"...
I [12/Aug/2013:16:59:56 -0300] [Job 154] Adding start banner page "none".
D [12/Aug/2013:16:59:56 -0300] Discarding unused job-created event...
I [12/Aug/2013:16:59:56 -0300] [Job 154] Queued on "USB_Modem" by "ufa".
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Create-Job (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 22] 2.0 Get-Printer-Attributes 4
D [12/Aug/2013:16:59:56 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 23] Accepted from localhost (Domain)
D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] [Client 23] POST / HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 23] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Send-Document 5
D [12/Aug/2013:16:59:56 -0300] [Client 23] 2.0 Get-Jobs 30
D [12/Aug/2013:16:59:56 -0300] Get-Jobs ipp://localhost:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/USB_Modem) from localhost
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] Send-Document ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] cupsdIsAuthorized: requesting-user-name="ufa"
D [12/Aug/2013:16:59:56 -0300] [Job 154] Auto-typing file...
D [12/Aug/2013:16:59:56 -0300] [Job 154] Request file type is image/tiff.
D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [12/Aug/2013:16:59:56 -0300] [Job 154] File of type image/tiff queued by "ufa".
I [12/Aug/2013:16:59:56 -0300] [Job 154] Adding end banner page "none".
D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Job 154] time-at-processing=1376337596
D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] Asserting dark wake.
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] Discarding unused printer-state-changed event...
D [12/Aug/2013:16:59:56 -0300] [Job 154] job-sheets=none,none
D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[0]="USB_Modem"
D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[1]="154"
D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[2]="ufa"
D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[3]="untitled text 6"
D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[4]="1"
D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[5]="job-uuid=urn:uuid:f1a61d10-1959-3fc1-7248-88abadd7e431 job-originating-host-name=192.168.1.20 time-at-creation=1376337596 time-at-processing=1376337596"
D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[6]="/private/var/spool/cups/d00154-001"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[0]="<CFProcessPath>"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[9]="HOME=/private/var/spool/cups/tmp"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[11]="[email protected]"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[12]="SOFTWARE=CUPS/1.6.2"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[14]="USER=root"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[15]="CUPS_MAX_MESSAGE=2047"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[16]="CUPS_SERVER=/private/var/run/cupsd"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[17]="CUPS_ENCRYPTION=IfRequested"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[18]="IPP_PORT=631"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[19]="CHARSET=utf-8"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[20]="LANG=en_US.UTF-8"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[21]="APPLE_LANGUAGE=en-US"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[22]="PPD=/private/etc/cups/ppd/USB_Modem.ppd"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[23]="RIP_MAX_CACHE=128m"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[24]="CONTENT_TYPE=image/tiff"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[25]="DEVICE_URI=fax://dev/cu.usbmodem0000001"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[26]="PRINTER_INFO=FAX"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[27]="PRINTER_LOCATION=mini"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[28]="PRINTER=USB_Modem"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[29]="PRINTER_STATE_REASONS=none"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[30]="CUPS_FILETYPE=document"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[31]="FINAL_CONTENT_TYPE=printer/USB_Modem"
D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[32]="AUTH_I****"
I [12/Aug/2013:16:59:56 -0300] [Job 154] Started filter /usr/libexec/cups/filter/cgimagetopdf (PID 51019)
I [12/Aug/2013:16:59:56 -0300] [Job 154] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 51020)
I [12/Aug/2013:16:59:56 -0300] [Job 154] Started filter /usr/libexec/cups/filter/rastertotiff (PID 51021)
I [12/Aug/2013:16:59:56 -0300] [Job 154] Started backend /usr/libexec/cups/backend/fax (PID 51022)
D [12/Aug/2013:16:59:56 -0300] Discarding unused job-state-changed event...
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Send-Document (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:56 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 22] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 22] 2.0 Get-Job-Attributes 6
D [12/Aug/2013:16:59:56 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 21] HTTP_WAITING Closing on EOF
D [12/Aug/2013:16:59:56 -0300] [Client 21] Closing connection.
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 22] HTTP_WAITING Closing on EOF
D [12/Aug/2013:16:59:56 -0300] [Client 22] Closing connection.
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 21] Accepted from 192.168.1.20:631 (IPv4)
D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Get-Job-Attributes 7
D [12/Aug/2013:16:59:56 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: copying to temp print file "/private/var/spool/cups/tmp/0c74c52155d4d"
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - document title: "untitled text 6"
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - filename: "/private/var/spool/cups/d00154-001"...
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - opened PPD file "/private/etc/cups/ppd/USB_Modem.ppd"...
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - dpi: (204, 196), orientation = 1...
E [12/Aug/2013:16:59:56 -0300] [Job 154] A fax number was not provided.
D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:56 -0300] [Job 154] Set job-printer-state-message to "A fax number was not provided.", current level=ERROR
D [12/Aug/2013:16:59:56 -0300] Discarding unused job-progress event...
D [12/Aug/2013:16:59:56 -0300] Discarding unused printer-state-changed event...
D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51022 (/usr/libexec/cups/backend/fax) exited with no errors.
D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51019 (/usr/libexec/cups/filter/cgimagetopdf) exited with no errors.
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: â€œ/private/var/spool/cups/tmp/0c74c52155d4dâ€ has 1 pages.
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: opened PPD file "/private/etc/cups/ppd/USB_Modem.ppd"...
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: size->width = 612, size->length = 792, size->top = 773.4, size->bottom = 18.6, size->left = 16.6, size->right = 595.4
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: PreferredRotation = 90
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: colorspace = 3, bitsPerColor = 1
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: band width = 1640, bytesPerRow = 1640, band height = 2055, height = 2055
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: context width = 1640, height = 2055, bitsPerComponent = 8, bitsPerPixel = 8, bytesPerRow = 1640, bitmapInfo = 0, resolution = (204.000000, 196.000000)
D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: bytes written for side 1 = 421275
D [12/Aug/2013:16:59:56 -0300] [Job 154] rastertotiff read page 1 (421275 bytes)
D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51020 (/usr/libexec/cups/filter/cgpdftoraster) exited with no errors.
D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51021 (/usr/libexec/cups/filter/rastertotiff) did not catch or ignore signal 13.
D [12/Aug/2013:16:59:56 -0300] [Job 154] time-at-completed=1376337596
D [12/Aug/2013:16:59:56 -0300] Discarding unused job-completed event...
I [12/Aug/2013:16:59:56 -0300] [Job 154] Job completed.
D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:56 -0300] Discarding unused printer-state-changed event...
D [12/Aug/2013:16:59:57 -0300] [Client 22] Accepted from 192.168.1.20:631 (IPv4)
D [12/Aug/2013:16:59:57 -0300] [Job 154] Unloading...
D [12/Aug/2013:16:59:57 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Printing jobs and dirty files"
D [12/Aug/2013:16:59:57 -0300] Releasing dark wake assertion.
D [12/Aug/2013:16:59:57 -0300] [Client 22] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 21] HTTP_WAITING Closing on EOF
D [12/Aug/2013:16:59:57 -0300] [Client 21] Closing connection.
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 21] Accepted from 192.168.1.20:631 (IPv4)
D [12/Aug/2013:16:59:57 -0300] [Client 23] POST / HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 23] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 24] Accepted from localhost (Domain)
D [12/Aug/2013:16:59:57 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 21] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 24] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 24] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 21] 2.0 Get-Job-Attributes 9
D [12/Aug/2013:16:59:57 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:57 -0300] [Job 154] Loading attributes...
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:57 -0300] [Client 24] 2.0 Get-Printer-Attributes 30
D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost/printers/USB_Modem
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/USB_Modem) from localhost
D [12/Aug/2013:16:59:57 -0300] [Client 23] 2.0 Get-Printer-Attributes 31
D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost:631/printers/USB_Modem
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost:631/printers/USB_Modem) from localhost
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 22] 2.0 Get-Printer-Attributes 8
D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 24] POST /printers/Brother_MFC_8480DN HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 24] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 21] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 24] 2.0 Get-Printer-Attributes 31
D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost/printers/Brother_MFC_8480DN
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Brother_MFC_8480DN) from localhost
D [12/Aug/2013:16:59:57 -0300] [Client 23] POST / HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 23] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 21] 2.0 Get-Printer-Attributes 10
D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 22] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] [Client 24] POST /printers/Brother_MFC_8480DN HTTP/1.1
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 24] No authentication data provided.
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 22] 2.0 Get-Job-Attributes 11
D [12/Aug/2013:16:59:57 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 24] 2.0 Get-Printer-Attributes 32
D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost/printers/Brother_MFC_8480DN
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Brother_MFC_8480DN) from localhost
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 23] 2.0 Get-Jobs 32
D [12/Aug/2013:16:59:57 -0300] Get-Jobs ipp://localhost:631/printers/USB_Modem
D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/USB_Modem) from localhost
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 22] HTTP_WAITING Closing on EOF
D [12/Aug/2013:16:59:57 -0300] [Client 22] Closing connection.
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [12/Aug/2013:16:59:57 -0300] [Client 21] HTTP_WAITING Closing on EOF
D [12/Aug/2013:16:59:57 -0300] [Client 21] Closing connection.
D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [12/Aug/2013:17:00:00 -0300] [Client 21] Accepted from localhost:631 (IPv6)
D [12/Aug/2013:17:00:00 -0300] [Client 21] GET /admin/log/error_log? HTTP/1.1
D [12/Aug/2013:17:00:00 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Aug/2013:17:00:00 -0300] [Client 21] Authorized as Xxx using Basic

Now all are running 10.9.2. Same problem, except that two of the 10.9.2 clients have this problem. (They may both have had this problem with 10.9.1, but it wasn't noticed until now.)
I have reset the printing system on the serving Mac, added the fax back in, and still have the problem.
I also reset the printing system on one of the problem clients, tried a different user, and still have the problem.
I also verified that the fax.ppd files are identical on working and non-working clients. They are.
This is really, really frustrating.

Similar Messages

Problem with Home Sharing. Getting the error "The Requested URL was not Found on this Server"

I recently purchased an iPhone 5. As I do with all of my AppleTVs, iPads, iPods and an iPhone 4 in my home, I connected the 5 to my home network and accessed the shared video library using home sharing. My iTunes library is roughly 85% iTunes purchases, a handful of videos taken with iOS devices, and some video ripped with Handbrake. All of these videos work fine on all devices in my home except my new iPhone 5. When I access the shared video library on my iPhone 5, all of the textual data for all of the videos appears, however, I can only get the iPhone to play 1 video of the dozens in my iTunes library. When I try to play any other, I get the error, "The Requested URL was not Found on this Server."
Interestingly, only one video in my entire shared library displays the artwork associated with it in my iTunes library on my iPhone 5, and that's the one I can stream without a problem. Even more interestingly, that video I am able to stream was ripped using Handbrake (there are a number in my library ripped using Handbrake, but just this one will stream to my iPhone 5 for some reason).
I'm using the latest version of iTunes (10.7) on my home (iMac) computer (running OSX 10.8.2- Mountain Lion)and of course iOS 6 on the iPhone 5. I've tried resetting my iPhone several times as well as restarting my iMac which holds my iTunes library.
Does anyone have any ideas as to what's going on?

Can you see if you can view index page from a browser on iPhone.
Have you seen live streams working from a different computer...
if not then check if a proper crossdomain.xml file in its place(webroot folder).

Error "The serial number is not valid for this product" | Creative Suite

HI together,
I'm very annoyed about the fact that I payed for Adobe Creative Suite Production Premium 5 (EDU version) and now I'm not able to use it on my new Mac. The Support team (Chat) from Adobe told me several times that the product/serial or whatever was canceled but this doesn't help me to get the product working and I won't pay again for this software. So what's the reason for cancellation? I can't see reasons for this and I don't understand why Support team can't help me. Already found Error "The serial number is not valid for this product" | Creative Suite but this doesn't helped me.
Regards
René

Maybe this is also useful... They told me I canceld this by myself which is not the truth. I had a Windows machine and used Creative Cloud as well but I only canceld the Cloud, not my Serial Number for Production Premium...
So who is able to reactivate my Serial Number so that I'm able to use my product?
info: Thank you for your patience.
While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: You are now chatting with Richa.
Richa: Hello! Welcome to Adobe Customer Service.
Richa: Sorry for any inconvenience this has caused
Richa: May I get the serial number?
Richa: Are we still connected?
Richa: We have not heard from you for some time. Do you wish to continue to chat?
Richa: Are we still connected?
Rene Pardon: hi
Rene Pardon: for sure
Rene Pardon: sorry, i took so much time for your answer that i decided to do anything else at this time
Rene Pardon: <Deleted >
Rene Pardon: i registered for the education version of production premium 5
info: Your chat transcript will be sent to r*@*.de at the end of your chat.
Richa: ok let me check
Richa: please wait
Richa: Thanks for your patinece
Rene Pardon: do you also need my "authorization code" for this product?
Richa: I need to transfer the chat to
Richa: tech rteam
Richa: please wait
Rene Pardon: ok
Richa: I am sorry
Richa: But I will not be able to transfer the chat
Rene Pardon: is there a phone number i can call?
Richa: As the serial number is canceldd
Richa: and we do apologise
Rene Pardon: why was it canceled?
Richa: but there is no phone support for this product
Rene Pardon: i don't understand because i payed a lot for this
Richa: Its showing canceled
Rene Pardon: so what are the options?
Rene Pardon: i need this product right now and i payed for it so why can't i use it?
Rene Pardon: Your file '2015-03-30_Personalausweis_*.pdf' was successfully uploaded.
Rene Pardon: as you can see, i'm the person who payed for this software
Richa: I am sorry I just checked it
Richa: it is canceled thats why you are getting invalid error
Rene Pardon: yeah, that's what i see but i dont understan. why was it canceled? who is responsible for this mistake? it doesn't help me to tell me what i already see i need a solution to use the product
Richa: I am sorry Rene
Richa: But its showing canceld
Richa: so cant help you with that
Richa: I wish I could help you, but my hands are tied
Rene Pardon: that's what you told me several times so who can help me?
Rene Pardon: i'm very annoyed about this fact that i can't use the software i payed for and noone is able to help me getting this working
Rene Pardon: so please tell me who is able to help me
Richa: You need to place a new order?
Rene Pardon: no, i won't pay AGAIN for this software i want a solution to use my already payed product
Rene Pardon: please get someone in your team who can help me
Richa: I am sorry Rene..
Richa: But unfortunately my team can not help you on this.. as the sersil is expired
Richa: I mean canceled
Richa: Sorry but we can not help Rene..
Rene Pardon: BUT WHY CAN'T YOU TELL ME WHY IT WAS CANCELED?
Rene Pardon: Help me understanding...
Rene Pardon: You're wasting my time!
Richa: I am sorry
Richa: I found the reason for cacnellation
Richa: and its canceldd
Richa: because you requested to cancel. in year 2013
Richa: On 30th april 2013
Rene Pardon: but i only canceled the creative cloud, not my creative suite
Richa: so we have refund and canceled it
Richa: Its showing for this oserial?
Rene Pardon: one moment
Rene Pardon: i log into my account
Rene Pardon: Your file 'Bildschirmfoto 2015-04-09 um 13.31.53.png' was successfully uploaded.
Rene Pardon: As you can see the product is displayed as "non-canceled"
Rene Pardon: I also bought the Createive Cloud during my time I had a Windows machine and this was the one i canceled - or I expected only this to get canceled
Richa: I am sorry but the refund was given and requested for this
Rene Pardon: There was only a refund for the Creative Cloud but not for the Creative Suite i bought
Rene Pardon: And why should I need a serial number for the Creative Cloud?
Rene Pardon: Please reactivate my Serial Number so that I'm able to use my product
Richa: I can not do that?
Rene Pardon: But i guess someone in your Team can
Richa: can not help you

When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?

When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2

ITunes stopped working on Windows 8. Error message 7: iTunes was not installed correctly.

I have Windows 8. Originally iTunes worked fine, then it couldn't update (said it was unsuccessful). Then it stopped working, so I (after much research) tried a long and tiresome method of removing all Apple products and re-installing them. I did this 3 times and it eventually worked and has been working fine for a few months. Recently, when trying to update, it has said "update successful", but when checking for new updates, finds the same one it supposedly just installed, wanting to install it again. For a few weeks now it has not worked at all, saying "error message 7: iTunes was not installed correctly" when I attempt to open iTunes. I can't bring myself to go through the whole process again of uninstalling and reinstalling everything, it took hours and it clearly doesn't solve the problem. I have no idea what the problem is. Reinstalling only iTunes doesn't work. The support pages have no advice available for my crappy version of Windows.
Please help me!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
It shouldn't really take that long to do, assuming it goes smoothly.
tt2

After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The requested URL was not found on this server"

After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The requested URL was not found on this server".
Anyone have any ideas?

You have two choices to try & fix this: 1. Backup your phone, then restore as a new device, then restore from the backup you first created, or 2. Follow the advise from this poster:
I had the same problem with the black blocks after upgrading to iOS4 on my iPhone. The reason for the black blocks is that the thumbnail images for those particular images have not been created when the Photo Library has been updated to iOS4. I followed the advice on a couple of blogs and fixed the problem.
1. I downloaded iPhone Explorer free software (http://www.macroplant.com/iphoneexplorer/) so I could view the photo data folders on my phone. I could see that the thumbnail images were missing.
2. I followed a slight variation on the instructions on this blog. (http://blog.mbentley.net/2010/06/iphone-ios-4-upgrade-restore-lost-pictures-in-c amera-roll/)
3. First I copied the Photo Data folder by dragging it from the iPhone Explorer window to my Mac desktop.
4. Through iPhone Explorer I deleted the info.plist file in the Media/PhotoData/MISC folder.
5. I also deleted the Photos.sqlite and PhotosAux.sqlite files in Media/PhotoData.
6. I then rebooted the phone and launched the Photo Library.
7. The Library rebuilt it's self again and recreated the thumbnails.
8. The problem was fixed!!! Thank you M Bentley!
I hope this helps - this has been bugging me for 2 weeks.
Regards
Alijm23

Error "This serial number is not for a qualifying product..." when installing an upgrade or upsell

I am trying to open a .indd file. I am running Adobe InDesign CS5. I got an error that plugins need to be updated. When I try to install the updates, I get the error that says: "Error "This serial number is not for a qualifying product..." when installing an upgrade or upsell..."
Can someone please help me with what I need to do to be able to open .indd files?
Thanks,
Nick

Those files were created in a later version of InDesign. Have the person that created them save them back via IDML or you’ll need to upgrade.

When i try to open iTunes I get error message "MSVCR80.dll was not found"

When I try to open iTunes I get error message "MSVCR80.dll was not found"

Hey Manyangels!
Here is an article that will help you troubleshoot this issue with your iTunes:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for coming to the Apple Support Communities!
Regards,
Braden

HT201210 iTunes update 11.1.4 produces an error message R6034 "An applicaton has made an attempt to load the C runtime library incorrectly" When that error is acknowledged, a second windows error 1114 "error 7" displays "iTunes was not installed correctly

iTunes update 11.1.4 produces an error message R6034 "An applicaton has made an attempt to load the C runtime library incorrectly" When that error is acknowledged, a second windows error 1114 "error 7" displays "iTunes was not installed correctly". I also tried to downloadiTunes 11.1.4 at th Apple website and that did not work either-It stalled with an erro message that stated the "mobile service" would not open HELP!

Hi Doug! I was having the same problem but after reading a lot of answers I found the solution. First of all you need unistall ALL THE SOFTWARE OF APPLE from your computer, I mean BONJOUR, QUICKTIME, ITUNES, APPLE SOFTWARE UPDATE, APPLE MOBILE DEVICE SUPPORT and the other one that is from compatibility with apps of apple, after that you must verify if this folders are removed if they don't then remove it:
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple\
C:\Program Files\iTunes\
C:\Program Files\iPod\
If you have a 64-bit version of Windows, you'll need to confirm that the following folders have been removed:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple\
C:\Program Files (x86)\iTunes\
C:\Program Files (x86)\iPod\
Then if you have ccleaner you can use it to clean all registers left, then reboot and try to install iTunes 11.1.4 again as administrator... That works for me, I hope that helps you too...

Please help me with this error: "Apple application support was not found... Error 2"

Can anyone please help me with this error: "Apple application support was not found... Error 2"
I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
"Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
Thank you

iTunes "Apple Application Support is required... Error 2" and possible fix.
I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
If it helps you please like this so others can find it.

ITunes! Getting Error 7 Windows error 126 Also AVFoundationCF was not found.

Having trouble downloading iTunes! Getting Error 7 Windows error 126 Also AVFoundationCF was not found. Everything was OK until I update to new version of iTunes. I have uninstalled the entire apple app's restart, disc clean and still not able to install iTunes.

Same or almost: iTunes was not installed correctly. Please reinstall iTunes. (I dit it!) Error 7 (Windows error 2)

Getting error:Absence type 100 was not found in Customizing for

Hi,
I am using the Standard workfllow for leave application, and when i am creating the request i am getting the bleow error:
'Absence type 100 was not found in Customizing for 21.10.2010'
What could be the reason, i have configured the statndard setting for leave type 100 in SPRO.
Thanks,
Krish.

Hi Kishore,
Please check the validity period for Absence type 100 configuration.
Also pass this Error message to your HR Functional consultant. It is the configuration issue and your FM have to take care of this issue.
Thanks.

Flash Chart Error "A Start-tag was not matched with an end-tag."

All of the Flash charts on a page started displaying the error "A Start-tag was not matched with an end-tag." The charts were all working prefectly and no changes were made to the page. Any thoughts?
Thanks.

Here is what I get when I click Show XML in debug mode. Thanks.
<?xml version="1.0" ?>
- <root>
- <styles>
<style type="background" id="background" background_type="solid" color="0xffffff" alpha="0" />
<style type="deal_background" id="dealBackground" enabled="yes" color="0xdddddd" alpha="100" />
<style type="deal_border" id="dealBorder" enabled="yes" thickness="1" color="0x666666" alpha="100" />
<style type="deal_position" id="dealPosition" left="146" top="169.1707317" />
<style type="deal_size" id="dealSize" startAngle="0" endAngle="180" innerRadius="0" outerRadius="109.5" />
<style type="indicator_background" id="indicatorBackground" enabled="yes" color="0x000000" alpha="100" />
<style type="indicator_border" id="indicatorBorder" enabled="yes" color="0xFFFFFF" thickness="1" alpha="0" />
<style type="scale_size" id="scaleSize" length="7.3" />
<style type="scale_position" id="scalePosition" radius="102.2" />
<style type="scale_lines" id="scaleLines" enabled="yes" thickness="1" color="0x000000" alpha="100" />
<style type="scale_labels_position" id="scaleLabelsPosition" radius="109.5" />
<style type="scale_labels_background" id="scaleLabelsBackground" enabled="no" />
<style type="scale_labels_border" id="scaleLabelsBorder" enabled="no" color="0x000000" />
<style type="scale_labels_text" id="scaleLabelsText" font="Verdana" size="10" color="0x000000" bold="no" italic="no" underline="no" align="right" />
<style type="scale_labels_size" id="scaleLabelsSize" />
<style id="areaBackground0" type="area_background" enabled="yes" color="0x669999" alpha="100" />
<style id="areaBackground1" type="area_background" enabled="yes" color="0xCCCCCC" alpha="100" />
<style id="areaBorder" type="area_border" enabled="yes" thickness="1" color="0xFFFFFF" alpha="100" />
<style id="areaBorder0" type="area_border" enabled="yes" thickness="1" color="0x666666" alpha="100" />
<style id="areaSize" type="area_size" outerRadius="105.85" innerRadius="36.5" />
<style type="circle_object_border" id="dotBorder" enabled="no" />
<style type="circle_object_position" id="dotPosition" left="146" top="169.1707317" />
<style type="circle_object_size" id="dotSize" radius="7.3" />
<style type="circle_object_background" id="dotBackground" enabled="yes" color="0x000000" alpha="100" />
<style id="emptyBorder" enabled="no" />
</styles>
- <shapes>
- <shape id="indicatorShape" type="polygon">
<point x="0" y="-4" />
<point x="-97.82" y="0" />
<point x="0" y="4" />
<point x="0" y="-4" />
</shape>
</shapes>
- <objects>
<circle sizeStyleId="dotSize" positionStyleId="dotPosition" backgroundStyleId="dotBackground" borderStyleId="dotBorder" />
</objects>
- <data>
<deal minimum="0" maximum="100" sizeStyleId="dealSize" positionStyleId="dealPosition" backgroundStyleId="dealBackground" borderStyleId="dealBorder" />
- <areas>
<area startValue="1" endValue="99" backgroundStyleId="areaBackground1" borderStyleId="areaBorder" sizeStyleId="areaSize" />
</areas>
- <scales>
<scale startAngle="0" endAngle="180" angleStep="18" labelsPrefix="" labelsPostfix="%" decimalPlaces="0" sizeStyleId="scaleSize" positionStyleId="scalePosition" linesStyleId="scaleLines" labelPositionStyleId="scaleLabelsPosition" labelBackgroundStyleId="scaleLabelsBackground" labelBorderStyleId="scaleLabelsBorder" labelTextStyleId="scaleLabelsText" labelSizeStyleId="scaleLabelsSize" />
</scales>
<indicator value="51.7412935" backgroundStyleId="indicatorBackground" borderStyleId="indicatorBorder" shapeId="indicatorShape" />
</data>
</root>

Error: The requested URL was not found, or cannot be served at this time.

Hi gurus,
I have a report that has a parameter file. When I call the report the parameter form is displayed but after I enter the parameter values and click SUBMIT QUERY, I receive this error:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Reports Server name is not specified.
If I run the report without parameter file it runs fine.
Does anyone have an idea on how I can make this work.
Thanks

* Can you please tell what version of Reports you are using ie 6i or 9i and the exact version [ In builder give Help->About] . In this problem we cannot deduce anything from the version. But if it is very old, we can recommend installing the latest patch.
* Please post the full command line request. If you have used any keys in cgicmd.dat , please post the expansion of that keys also.
* If possible as a workaround give paramform=no&paramName=paramValue ... in request till this problem is resolved.
Thanks
The Oracle Reports Team

SSL ERROR : The required certificate was not found

I am using Adobe Javascript this.submitForm to submit FDF. This works fine in Windows. When the same pdf is opened in a Linux environment I get the following error:
SSL ERROR : The required certificate was not found
and am required to run acroread -installCertificate.
This I do and it succeeds but the SSL error persists.
The this.submitForm command is given below:
/this.submitForm({cURL: 'https://some-webpath/FILE.cgi#FDF',bFDF: true,bGet: false});
When reading the documentation for the submitForm I see that the Acrobat Web Capture plug-in should be installed: I notice this is the case in Windows but not in Linux. Where can I get this?

Hi Ben,
The behavior you have noticed with the newly installed certificate files in
[home-folder]/.adobe/Acrobat/[version]/Cert folder
and the
[install-folder]/Adobe/Reader8/Reader/Cert/curl-ca-bundle.crt file is correct. Further, the behavior has not changed between Reader versions 8.x and 9.x
It is possible that the problem may be of the installed certificate not linking up to one of the Root CA-s. An Intermedia-CA certificate may be needed to be installed.
Could you mail me at " sanath at adobe dot com ", if possible, with more information about the problem (the PDF, the certificate in question - the file named like 123456.0 ), so that we at Adobe can work on resolving your problem
Regards
Sandip

Remote faxing error - A fax number was not provided.

Similar Messages

Maybe you are looking for