Remote rejected error with git
I'm trying to get a git public repository installed on server and can't seem to push an update.
I have my server local user with ssh access and file transfers seem to go fine. I have git 1.6.0.4 installed on both development iMac PPC (10.5.5) and server Intel (10.5.5). I included git-shell path in /etc/shells and /etc/shells.personal.
The public repository was deposited on an external drive with scp and everything looks good. Permissions to the files are in place. Following git installation to /usr/local, I added /usr/local/libexec/git-core to the $PATH variable.
I even chmoded the hooks files for execution.
However, when I make a change on the development side and then commit, followed by a push to the server side I get
"Compressing 3 objects. Done
Writing 5 objects. Done
Output:
Counting objects: 9, done.
Total 5 (delta 3), reused 3 (delta 2)
fatal: exec unpack-objects failed.
error: unpack failed: unpacker exited with error code
To server:/Volumes/dir.git
! [remote rejected] master -> master (n/a (unpacker error))
error: failed to push some refs to 'server:/Volumes/dir.git'"
All my google efforts produced linux type solutions. I did add a report back hook for update but I don't see any response.
Console secure log indicates the ssh publickey is accepted and file transfer seems to go through.
My guess is that git-unpack-objects is not called.
I tried git gc and git fsck to cleanup any residual files and received no errors.
On initial transfer of the public repository and subsequent push I received an "Everything is up to date". It's the push following a new commit that hangs.
Any advice from someone running git on server?
TIA,
Harry
I went back to a package install of git-1.5.4.5 on my ppc iMac and git-1.6.0.4 on Leopard server. Still not much luck.
After re-examining permissions and setting paths, I finally got a push to work using Paul Johnston's approach at
http://marc.info/?l=git&m=122101378608279&w=2
# Fix it with symlinks in /usr/bin
server:~ $ cd /usr/bin/
server:/usr/bin $ sudo ln -s /usr/local/git/bin/git* .
I don't understand why I need the symlink is needed unless the ssh connection doesn't allow execution from a path location other than /usr/bin or /usr/sbin.
Once the symlink was installed for each of the git directory components then the push executed fine. I did use the +master:master to get a non fast-forward.
Not sure if that is still required but the connection worked.
Hope this helps someone in addition to me.
Harry
Similar Messages
-
Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
+ FullyQualifiedErrorId : JobFailure
+ PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/HenrikHi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
to solve this problem.
Initialization Failed
The following error occurred while searching for the on-premises Exchange server:
[win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
$true -CurrentVersion 'Version 14.1 (Build 218.15)''.
Thanks Vivek
SharePoint Foundation 2010 Book
http://www.redpipit.comHi,
Please have a look at the article below:
Troubleshooting Exchange 2010 Management Tools startup issues
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Resolving WinRM errors and Exchange 2010 Management tools startup failures
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
Besides, please run the cmdlet below:
set-user alias -remotepowershellenabled$true
Xiu Zhang
TechNet Community Support -
Remote access VPN with ASA 5510 using DHCP server
Hi,
Can someone please share your knowledge to help me find why I am not able to receive an IP address on remote access VPN connection while I can get an IP address on local DHCP pool?
I am trying to setup remote access VPN with ASA 5510. It works with local dhcp pool but doesn't seem to work when I tried using an existing DHCP server. It is being tested in an internal network as follows:
ASA Version 8.2(5)
interface Ethernet0/1
nameif inside
security-level 100
ip address 10.6.0.12 255.255.254.0
ip local pool testpool 10.6.240.150-10.6.240.159 mask 255.255.248.0 !(worked with this)
route inside 0.0.0.0 0.0.0.0 10.6.0.1 1
crypto ipsec transform-set FirstSet esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map dyn1 1 set transform-set FirstSet
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface inside
crypto isakmp enable inside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
vpn-addr-assign aaa
vpn-addr-assign dhcp
group-policy testgroup internal
group-policy testgroup attributes
dhcp-network-scope 10.6.192.1
ipsec-udp enable
ipsec-udp-port 10000
username testlay password *********** encrypted
tunnel-group testgroup type remote-access
tunnel-group testgroup general-attributes
default-group-policy testgroup
dhcp-server 10.6.20.3
tunnel-group testgroup ipsec-attributes
pre-shared-key *****
I got following output when I test connect to ASA with Cisco VPN client 5.0
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDO
4024 bytesR copied in 3.41 0 secs (1341 by(tes/sec)13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 853
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing SA payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ISA_KE payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing nonce payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received xauth V6 VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received DPD VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received Fragmentation VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: True Aggressive Mode: False
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received NAT-Traversal ver 02 VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received Cisco Unity client VID
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, Connection landed on tunnel_group testgroup
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing IKE SA payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA Proposal # 1, Transform # 9 acceptable Matches global IKE entry # 1
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing ISAKMP SA payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing ke payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing nonce payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for Responder...
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing ID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Computing hash for ISAKMP
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing Cisco Unity VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing xauth V6 VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing dpd vid payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing NAT-Traversal VID ver 02 payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing Fragmentation VID + extended capabilities payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Send Altiga/Cisco VPN3000/Cisco ASA GW VID
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + HASH (8) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NAT-D (130) + NAT-D (130) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 440
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=0) with payloads : HDR + HASH (8) + NOTIFY (11) + NAT-D (130) + NAT-D (130) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 168
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Computing hash for ISAKMP
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Processing IOS/PIX Vendor ID payload (version: 1.0.0, capabilities: 00000408)
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Received Cisco Unity client VID
Jan 16 15:39:21 [IKEv1]: Group = testgroup, I
[OK]
kens-mgmt-012# P = 10.15.200.108, Automatic NAT Detection Status: Remote end is NOT behind a NAT device This end is NOT behind a NAT device
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing blank hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing qm hash payload
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=d4ca48e4) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 72
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=d4ca48e4) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 87
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): Enter!
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Processing MODE_CFG Reply attributes.
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary WINS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary WINS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: IP Compression = disabled
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling Policy = Disabled
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Browser Proxy Setting = no-modify
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Browser Proxy Bypass Local = disable
Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, User (testlay) authenticated.
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing blank hash payload
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing qm hash payload
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=6b1b471) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 64
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=6b1b471) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 60
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): Enter!
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Processing cfg ACK attributes
Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=49ae1bb8) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 182
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): Enter!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Processing cfg Request attributes
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for IPV4 address!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for IPV4 net mask!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for DNS server address!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for WINS server address!
Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Received unsupported transaction mode attribute: 5
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Banner!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Save PW setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Default Domain Name!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Split Tunnel List!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Split DNS!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for PFS setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Client Browser Proxy Setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for backup ip-sec peer list!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Client Smartcard Removal Disconnect Setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Application Version!
Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Client Type: WinNT Client Application Version: 5.0.07.0440
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for FWTYPE!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for DHCP hostname for DDNS is: DEC20128!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for UDP Port!
Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Duplicate Phase 2 packet detected. No last packet to retransmit.
Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=b04e830f) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) total length : 84
Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload
Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload
Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Duplicate Phase 2 packet detected. No last packet to retransmit.
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE received response of type [] to a request from the IP address utility
Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Cannot obtain an IP address for remote peer
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE TM V6 FSM error history (struct &0xd8030048) <state>, <event>: TM_DONE, EV_ERROR-->TM_BLD_REPLY, EV_IP_FAIL-->TM_BLD_REPLY, NullEvent-->TM_BLD_REPLY, EV_GET_IP-->TM_BLD_REPLY, EV_NEED_IP-->TM_WAIT_REQ, EV_PROC_MSG-->TM_WAIT_REQ, EV_HASH_OK-->TM_WAIT_REQ, NullEvent
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE AM Responder FSM error history (struct &0xd82b6740) <state>, <event>: AM_DONE, EV_ERROR-->AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL-->AM_TM_INIT_MODECFG_V6H, NullEvent-->AM_TM_INIT_MODECFG, EV_WAIT-->AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG-->AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK-->AM_TM_INIT_XAUTH_V6H, NullEvent-->AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b terminating: flags 0x0945c001, refcnt 0, tuncnt 0
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending delete/delete with reason message
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing blank hash payload
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing IKE delete payload
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing qm hash payload
Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=9de30522) with payloads : HDR + HASH (8) + DELETE (12) + NONE (0) total length : 80
Regards,
LayFor RADIUS you need a aaa-server-definition:
aaa-server NPS-RADIUS protocol radius
aaa-server NPS-RADIUS (inside) host 10.10.18.12
key *****
authentication-port 1812
accounting-port 1813
and tell your tunnel-group to ask that server:
tunnel-group VPN general-attributes
authentication-server-group NPS-RADIUS LOCAL
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni -
Deployment Manager Error with Oracle Weblogic Server 10.3.1
I have installed Identity Manager 9.1.0.2 (patch upgraded from 9.1.0.1) on OEL 5.3 64bit and Weblogic 10.3.1
Database:Oracle 11gR2 (remote machine).
**I am aware that IM 9.1.0.2 is not certified on Weblogic 10.3.1 (it is only certified on 10.3),
The installation was successful and OIManager is up and running. Able to create Users, Resources etc. as well.
As part of configuring OIM Connectors tried to Import .xml file using Import option from Deployment Management section as below and the following error was displayed.
"Either your session timed out or you are trying to access a page without logging in".
Did all workarounds like enabling java, changing browsers, restarting machine etc as per the below discussion but in vain.
Deployment Manager Error with Oracle Weblogic Server
Can any one suggest any workaround or solution for this problem.
Or atleast can any one confirm there is no Identity manager available on this date which is compatible with 10.3.1? and cannot be continued further.
Thanks in Advance
Sudheer
Edited by: SudheerPrabhala on Oct 20, 2009 1:26 AMYou are facing this issue because you're using a non certified combination.
Other folks who tried to use OIM in 10.3.1 ended up in the same problem you're facing. -
Remote JDBC Problem with Oracle BPM Studio
Hi all, i am facing the Remote JDBC Problem with Oracle BPM Studio.
When i configure a Remote JDBC Connection for SQL in BPM Studio, it prompt me an error.
The SQL Connection is configured as following :
External Resource:
Name : MyDS
Type : SQL Database
Supported Types : Remote JDBC
Details:
Database Type : BPM's Oracle Driver Version:10, 11
J2EE : WLS
Lookup Name : MyAppDS
Configuration for "WLS"
Name : WLS
Type : J2EE Application Server
Supported Types : GENERIC_J2EE
Details:
Initial Context Factory : weblogic.jndi.WLInitialContextFactory
URL : t3://localhost:7001
But, when i try to connect to the Database by using this configuration, I will get an Exception.
An exception occurred while getting a resource from a connector.
Detail:The connector [[ MyDS : SQL : REMOTE_JDBC ]] caused an exception when getting a resource.
Caused by: An exception occurred while getting a resource from a connector.
Detail:The connector [[ WLS : J2EE : J2EE ]] caused an exception when getting a resource.
Caused by: javax.naming.NoInitialContextException: Cannot instantiate class: weblogic.jndi.WLInitialContextFactory [[ Root exception is java.lang.ClassNotFoundException: weblogic.jndi.WLInitialContextFactory ]]
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:657)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at fuego.jndi.FaultTolerantContext.createContext(FaultTolerantContext.java:726)
at fuego.jndi.FaultTolerantContext.<init>(FaultTolerantContext.java:79)
at fuego.connector.impl.GenericJ2EEConnector.createInitialContext(GenericJ2EEConnector.java:177)
at fuego.connector.impl.GenericJ2EEConnector.createStandaloneContext(GenericJ2EEConnector.java:98)
at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:92)
at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:76)
at fuego.connector.J2EEHelper.getReadOnlyContext(J2EEHelper.java:86)
... 12 more
Edited by: user2262377 on Jun 22, 2009 4:01 PMI guess the weblogic.jar is not included in the studio.
So, i added weblogic.jar (Weblogic 10.3) and wlclient.jar (Weblogic 10.3)
It is working in my simple java code. But, still not working in BPM Studio.
The error logs:
An exception occurred while getting a resource from a connector.
Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
Caused by: java.lang.Object cannot be cast to java.io.Serializable
fuego.connector.ConnectorException: An exception occurred while getting a resource from a connector.
Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
at fuego.connector.ConnectorException.exceptionOnGetResource(ConnectorException.java:88)
at fuego.connector.JDBCHelper.getReadOnlyConnection(JDBCHelper.java:93)
at fuego.sqlintrospector.BrowserPanel.connect(BrowserPanel.java:395)
at fuego.sqlintrospector.BrowserPanel.populateTree(BrowserPanel.java:200)
at fuego.ui.wizards.ui.CheckTreeBrowser$1.construct(CheckTreeBrowser.java:63)
at fuego.ui.SwingWorker$2.run(SwingWorker.java:39)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassCastException: java.lang.Object cannot be cast to java.io.Serializable
at weblogic.iiop.IIOPOutputStream.writeAny(IIOPOutputStream.java:1588)
at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2231)
at weblogic.utils.io.ObjectStreamClass.writeFields(ObjectStreamClass.java:413)
at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:235)
at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:225)
at weblogic.corba.utils.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:182)
at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:1963)
at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:2001)
at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2266)
at weblogic.jdbc.common.internal.RmiDataSource_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) -
SQL*Loader- Records Rejected - Error on table ORA-01722: invalid number
Getting the following errors :
Please tell me where I am going wrong?
Attached is the log file and snippets of datafile along with the control file !!
Also please direct me how can i upload 4900 records at one go?
SQL*Loader: Release 11.1.0.7.0 - Production on Fri Oct 14 03:06:06 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Control File: sample.ctl
Data File: Cities.csv
Bad File: Cities.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table CITY, loaded from every logical record.
Insert option in effect for this table: INSERT
Column Name Position Len Term Encl Datatype
ID FIRST * , CHARACTER
NAME NEXT 35 , ' CHARACTER
COUNTRYCODE NEXT 3 , ' CHARACTER
POPULATION NEXT * WHT CHARACTER
Record 1: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 2: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 3: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 4: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 5: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 6: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 7: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 8: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 9: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 10: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 11: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 12: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 13: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 14: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 15: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 16: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 17: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 18: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 19: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 20: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 21: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 22: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 23: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 24: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 25: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 26: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 27: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 28: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 29: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 30: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 31: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 32: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 33: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 34: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 35: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 36: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 37: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 38: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 39: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 40: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 41: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 42: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 43: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 44: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 45: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 46: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 47: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 48: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 49: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 50: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
Record 51: Rejected - Error on table CITY, column POPULATION.
ORA-01722: invalid number
MAXIMUM ERROR COUNT EXCEEDED - Above statistics reflect partial run.
Table CITY:
0 Rows successfully loaded.
51 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 35840 bytes(64 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 64
Total logical records rejected: 51
Total logical records discarded: 0
Run began on Fri Oct 14 03:06:06 2011
Run ended on Fri Oct 14 03:06:12 2011
Elapsed time was: 00:00:06.18
CPU time was: 00:00:00.03
my control file (sample.ctl):
load data infile 'Cities.csv'
into table city
fields terminated by ','
(id integer external,
name char(35) enclosed by "'",
countrycode char(3) enclosed by "'",
population integer external terminated by '\n'
my datafile (Cities.csv) (it contains 4900 records, but I am showing here just 4 records for ease)
3830,'Virginia Beach','USA',425257
3831,'Atlanta','USA',416474
3832,'Sacramento','USA',407018
3833,'Oakland','USA',399484
Thanks in advance!!Look that when I change a little bit your datafile as follows
1,'Kabul','AFG',1780000
2,'Qandahar','AFG','237500'
3,'Herat','AFG','186800' I got the same error (2 last rows rejected for the same error invalid number)
mhouri > select * from cities;
ID NAME COU POPULATION
1 Kabul AFG 1780000
SQL*Loader: Release 10.2.0.3.0 - Production on Fri Oct 14 10:38:06 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File: cities.ctl
Data File: cities.dat
Bad File: cities.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table CITIES, loaded from every logical record.
Insert option in effect for this table: INSERT
Column Name Position Len Term Encl Datatype
ID FIRST * , CHARACTER
NAME NEXT 35 , ' CHARACTER
COUNTRYCODE NEXT 3 , ' CHARACTER
POPULATION NEXT * WHT CHARACTER
Record 4: Rejected - Error on table CITIES, column ID.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 2: Rejected - Error on table CITIES, column POPULATION.
ORA-01722: invalid number
Record 3: Rejected - Error on table CITIES, column POPULATION.
ORA-01722: invalid number
Table CITIES:
1 Row successfully loaded.
3 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 35840 bytes(64 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 4
Total logical records rejected: 3
Total logical records discarded: 0
Run began on Fri Oct 14 10:38:06 2011
Run ended on Fri Oct 14 10:38:06 2011
Elapsed time was: 00:00:00.23
CPU time was: 00:00:00.09Population value within the data file should be a number
Best regards
Mohamed Houri -
Listener error with dg4odbc and mysql
Hi all,
First of all, sorry for my English, I'm learning :-)
I'm trying to create a dblink from oracle to mysql, but for now this seems impossible. I have read lots of manuals and post, but no way. I can connect to remote mysql server with "isql my_portal", so, unixodbc and the mysql driver for odbc are working in the server.
The oracle database 10.2 is installed in a Red Hat 64 bits server. Due to hsodbc for 10.2 is only for 32bit i installed the gateway version for 11g without problems (no errors showed, so...) But I have always the same error: "TNS-12541: TNS:no listener dg4odbc" But my configuration seems correct. Can anyone find the error in my config? Thank you
This is the documentation that I have used:
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=561033.1
After apply the modifications to the configuration files, this is what lsnrcntl start says:
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/liste ner.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/srv-bbdd1/listener/alert/lo g.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=1.0.2.42)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC0)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cl-oracle.jferrer.es)(PO RT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 16-MAR-2011 10:54:38
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/list ener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/srv-bbdd1/listener/alert/ log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=1.0.2.42)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC0)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "SQLServerA3" has 1 instance(s).
Instance "SQLServerA3", status UNKNOWN, has 1 handler(s) for this service...
Service "dbjde" has 1 instance(s).
Instance "dbjde", status UNKNOWN, has 1 handler(s) for this service...
Service "my_portal" has 1 instance(s).
Instance "my_portal", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Then I try tnsping to my_portal:
tnsping:
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 16-MAR-2011 11:36:45
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = localhost) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = my_portal)) (HS=OK))
TNS-12541: TNS:no listener
Some information:
- unixodbc driver is in /usr/lib64 (libodbc.so)
- mysql for odbc driver is in /usr/lib64 (libmyodbc.so)
This is my odbc.ini (/etc/odbc.ini):
[ODBC Data Sources]
odbcname = my_portal
[my_portal]
Description = my_portal
Driver = MySQL
SERVER = 1.0.2.98
PORT = 3306
USER = root
PASSWORD = desarrollo
Database = portal_clientes
[MySQL]
Description=ODBC for MySQL
Driver=/usr/lib64/libmyodbc.so
Setup=/usr/lib64/libodbcmyS.so
Added to listener.ora
(SID_DESC =
(SID_NAME = my_portal)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = dg4odbc)
(ENVS = LD_LIBRARY_PATH=/u01/app/oracle/product/10.2.0/db_1/hs/lib:/u01/app/oracle/product/10.2.0/db_1/lib:/usr/lib64)
Added to tnsnames.ora
my_portal =
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = localhost)
(PORT = 1521)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = my_portal))
(HS=OK))
initmy_portal.ora
HS_FDS_CONNECT_INFO=my_portal
HS_FDS_SHAREABLE_NAME=/usr/lib64/libodbc.so
HS_FDS_TRACE_LEVEL=ON
UseCursorLib=0
set ODBCINI=/etc/odbc.iniThank you for the response. The problem was the solved when change the 1.2.0.40 to 42 :-)
Another issue I saw is your ORACLE_HOME - did you install DG4ODBC in your 10.2 OH?Yes, the documentation said that is certified to work with Oracle 10.2.0.4 that is our version, is this a problem? (¿...?) I had no problem to install dg4odbc with the universal installer.
But I have another problems now. I can't remember the exact error, but my first problem was solved adding this line to initmy_portal.ora:
HS_FDS_QUOTE_IDENTIFIER="'"
Now, when I try to make a select oracle returns this:
ORA-00942: la tabla o vista no existe
[MySQL][ODBC 3.51 Driver][mysqld-5.1.41-3ubuntu12.10]Table 'portal_clientes.CLIENTES' doesn't exist {42S02,NativeErr = 1146}[MySQL][ODBC 3.51 Driver][mysqld-5.1.41-3ubuntu12.10]Table 'portal_clientes.CLIENTES' doesn't exist {42S02,NativeErr = 1146}
ORA-02063: 2 lines precediendo a MY_PORTAL_DBLINK
The table exists, I'm sure, and if I change the query to other tables the result is the same: the table doesn't exist. Any idea?
Thank you for the help -
Sql loader error with date format
Hi everyone,
I have table and have a data in one coulmn RECORDED_DATE like '20090224' and my client is asking me to load this coulmn data in 'yyyymmdd' format.I am strucked up with my ideas.I used to_date('20090124','yyyymmdd') in control file.but it is also not working Here it is my control file
LOAD DATA
INFILE 'C:\xxxx\SQLLDR\HE data\HE_data_Feb.txt'
BADFILE 'C:\xxxx\SQLLDR\HE data.bad'
DISCARDFILE 'C:\xxxx\SQLLDR\HE data.dsc'
INTO TABLE LSCCMGR.FASTPAY_HE_DATA
REPLACE
fields terminated by X'09'
TRAILING NULLCOLS
(RECORDED_DATE "TO_DATE(:RECORDED_DATE,'mm/dd/yyyy')"
AGENT_ID
MEASURE
TRANSACTIONS
FEES
If i excute like this i am getting the error like
Record 1: Rejected - Error on table LSCCMGR.FASTPAY_HE_DATA, column RECORDED_DATE.
ORA-01843: not a valid month
Getting for all records,what i need o change to get the RECORDED_DATE as dateformat.Ple any one help me in this issue to resolve
How can we perform this using sql loader pls let me know,Thanks in advance.
SravanHi,
>>(RECORDED_DATE "TO_DATE(:RECORDED_DATE,'mm/dd/yyyy')"
*Change this line to*
(RECORDED_DATE "TO_DATE(:RECORDED_DATE,'yyyymmdd')"Regards, -
"out of memeory" error with Adobe Reader x & IE8
Hello,
Getting an "out of memory" error with Adobe Reader X & IE8. This is a locked down bank environment so upgrading to a higher version of Adobe is out of the question.
I looked around on the web and noticed that many people are experiencing this "out of memory error" but no fix has been provided.
Can you help?Thanks for the reply and suggestion - unfortunately, I get this error when I open Adobe Reader X itself in addition to launching a pdf within IE9 (my OS is Win7x64 Ultimate). I can launch Adobe Reader X, but when I open any kind of PDF file (local copy, remote, web, etc...) the error dialog box pops up. Everything seems functional with Reader, it's just a frustrating (er, irritating!) thing! I think after the weekend I will 'give up' and remove the Reader X and go back to my 'old' (but functioning!) Reader - thanks for the comment and suggestion tho!
-
Hi there,
We are getting error messages in SOST and some of the emails are not going out. The error messages is "Cannot process message, no route from USERNAME to SID:500:USERNAME". This client on that SID is used for CUA purposes and the connection is present in SM59 and there is no authorization and connection problem as I tested it there.
Dont know how to resolve this issue. Any hints. The communication method is set to remote mail in SU01 and in SCOT I can see the errors under RML.
Any ideas how to resolve it.
ThanksThanks everybody for the responses. I think I have to explain it more in detail here. In SRM we are using procurement. All the emails go out find to all suppliers. On one day we noticed failures just for one person and it gets repeated whenever the SMTP job runs. That user is set to RML in SU01 that is remote mail. The error messages in SOST is that same as I stated in my problem for the first time. I deleted all of them and its still keeps on throwing the cannot send email message whenever the SMTP job runs. The strange thing is that whenever I delete the message the same number of message appears with the status of waiting. I left it there for a day and then deleted all of them and then it vanished. I dont know how this thing works but the problem is resolved. All the settings/configuration mentioned by you guys are done correctly and I verified it.
At this point I like to understand how remote mail is different from email in SU01. Why the same number of messages keep on coming up as soon as I deleted the failed message in SOST.
Thanks again everybody for all your help.
Shafquat
Re: Remote Mail Error
Posted: Jun 1, 2009 9:40 AM in response to: Shafquat Khan Reply
1) Have u actiaved parameter icm/plugin_<*> in instance profile
2) Set Default domain
3) Schedluled send Job
4) Activated SMTP in SMICM
Anindya Bose
Posts: 10
Registered: 6/1/09
Forum Points: 0
Solved problem (10)
Very helpful answer (6)
Helpful answer (2)
Re: Remote Mail Error
Posted: Jun 1, 2009 11:18 AM in response to: Anish John Reply
1. Can you please check wheather SAPCOnnect ( TCode SICF) is activated for your system.
2. Check Code page in SCOT and the name of the mail host.
3. Go to TCode SCOT, Check "Internet" in "Supported address type" click on "Set" and in the "Address Area" put "*"
4. Please also check whether the connection between your SAP server and the mail host( SMTP host) working.
5. Check whether SAPConnect job has been scheduled
If you are still gettting problem please paste Log from SOST.
Prasanna K
Posts: 37
Registered: 12/1/08
Forum Points: 20
Solved problem (10)
Very helpful answer (6)
Helpful answer (2)
Re: Remote Mail Error
Posted: Jun 1, 2009 3:24 PM in response to: Anindya Bose Reply
Hi,
Does the user has a email id mentioned in su01.
Thanks,Prasanna
Edited by: Prasanna K on Jun 1, 2009 3:29 PM -
Communication error with the opmn server local port
Working on 64-bit R12.0.6 on AIX 5L
Application services are not being started properly. They are being started with status 2(sometimes with 4).
Autocinfig is being successfully completed.
Please help me how I can get rid of this error. Following are some of the environment setting details:
ons.conf
nodes=appaix02.us.oracle.com:15007
opmn.xml
<opmn xmlns="http://www.oracle.com/ias-instance">
<notification-server>
<port local="15006" remote="15007" request="15005"/>
opmn.log
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
ons.log
07/01/11 13:12:02 [4] ONS server initiated
07/01/11 13:12:52 [4] Logging disabled
07/01/11 13:12:53 [4] ONS server initiated
07/01/11 13:13:04 [4] Logging disabled
07/01/11 13:13:04 [4] ONS server initiated
07/01/11 13:13:17 [4] Logging disabled
07/01/11 13:13:28 [4] ONS server initiated
07/01/11 13:13:40 [4] Logging disabled
07/01/11 13:13:41 [4] ONS server initiated
07/01/11 13:14:20 [4] Logging disabled
07/01/11 13:14:21 [4] ONS server initiated
07/01/11 13:14:29 [4] Logging disabled
07/01/11 13:14:29 [4] ONS server initiated
07/01/11 13:14:34 [4] Logging disabled
07/01/11 13:14:34 [4] ONS server initiated
07/01/11 13:15:53 [4] Logging disabled
adopmnctl.txt
10/08/10-23:30:43 :: adopmnctl.sh version 120.4.12000000.3
10/08/10-23:30:43 :: adopmnctl.sh: Stopping Oracle Process Manager (OPMN) and t
he managed processes
opmnctl: stopping opmn and all managed processes...
10/09/10-11:13:41 :: adopmnctl.sh version 120.4.12000000.3
10/09/10-11:13:41 :: adopmnctl.sh: Starting Oracle Process Manager (OPMN)
opmnctl: opmn start failed.
10/09/10-11:15:09 :: adopmnctl.sh: exiting with status 2
adformsctl.txt
opmnctl: stopping opmn managed processes...
10/09/10-11:18:11 :: adformsctl.sh version 120.12.12000000.5
10/09/10-11:18:11 :: adformsctl.sh: starting OPMN if it is not running
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
opmnctl: opmn start failed.
Please help."A point to add"
I just noticed that following message is being continously receiving in the database alert_log:
Sat Oct 9 16:04:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:05:32 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:06:30 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:07:10 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:09:35 2010
Incremental checkpoint up to RBA [0x1d.1f9928.0], current log tail at RBA [0x1d.1f9a79.0]
Sat Oct 9 16:11:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:29:40 2010
Incremental checkpoint up to RBA [0x1d.1f9b87.0], current log tail at RBA [0x1d.1f9bf4.0]
~
Please help. -
Managing/backing up with git
Would I be able to setup my site as a remote repository with git as a way to backup/update the templates and scripts and is there a way I can hide the actual .git file from public view?
I know there's no way to really run a local version of a site except with webbasics because I can't backup the database but I could at least do everything else.You can do that Kenneth. Simply create a repository locally by initiating it and then push your changes to some remote repo on github or some other service. Try bitbucket.com. it's free and you can have private repos.
-m -
Remote Communication Error(Trex).
Dear Friends,
We have configuresd Trex for Full Text Search in DMS. But the Issue is we are not able to Index Documents. When I check the connections under "Trex_admin--->TREX ABAP Customizing" by giving Host Name or IP Address and Trex Index Server Port both "Test Connection" and " Net Performance" are showing OK.
But under Analyze Application Log by using Object as "TREX" & Subobject as " None" system is throwing an error as "Remote communication failure with partner &PARTNER&"
I have searched in SDN and acted according to that. But unable to resolve this issue.
Could u please assist me in this regard.
with regards,Hi Dayanda,
I also have the same issue can you share the solution?
Best regards
Pascal -
Remote front panel with labview 8.6 executable
I am trying to create a remote front panel of my application, built in an executable using Labview 8.6. I want to run that application on a target machine (not the one used for developing the project) and view and control the front panel of the VI from a web browser on another computer.
I have followed these steps:
How can I use remote front panels with Labview Executables?
But when I finally open the web browser and navigate to the URL I obtain that the page cannot be found.
I have my Labview project created and I have built a web page using Web publishing tool. I have saved it in my Labview 8.6/www directory and added it to the project. I have built my executable including HTML file and copied all the obtained folders to the target PC.
Then, I have modified the .ini file like in the step 7, but when I arrive to the step 8 I don't know what to do. Which niwebserver.conf should I modify? The one localized at Labview 8.6 directory of the target machine? Or the one that is created in the directory where I have copied the executable when I run the executable?
In the DocumentRoot tag I have to replace the default Labview/www with the location of my HTML file. Should I use quotation marks or no?
Have you got any ideas of what is happening?
Thanks!Ok, but when I create the executable, in the folder where the application.exe and .ini are there isn't a file called niwebserver.conf. When I run the application a file with this name appear in the directory (the one I include), but it hasn't the section Directives that apply to the default server as in the manual.
What I have done is to copy the niwebserver.conf file ubicated in the Labview 8.6 of the target machine in the same directory of the executable but it doesn´t work...
niwebserver.conf
ServerRoot "."
ErrorLog "./logs/error.log"
LogLevel 3
ServerName default
DocumentRoot "./../../www"
Listen 80
ThreadLimit 10
TypesConfig mime.types
DirectoryIndex index.html
LoadModulePath "./modules" "./LVModules" "./.."
LoadModule LVAuth lvauthmodule
LoadModule LVSnapshot lvsnapshotmodule
LoadModule LVRFP lvrfpmodule
LoadModule LvExec ws_runtime
LoadModule dir libdirModule
LoadModule copy libcopyModule
AddHandler LVAuthHandler
AddHandler LVSnapshotHandler .snap
AddHandler LVRFPHandler
AddHandler LvExec
AddHandler dirHandler
AddHandler copyHandler
CustomLog "./logs/access.log" "%h %l %u %t \"%r\" %>s %b"
KeepAlive on
KeepAliveTimeout 60
Timeout 60
Maybe you are looking for
-
How do I get spouses and children on to printed labels and envelops?
I store spouses and children in the fields provided for these names. When I go to print labels, Address Book puts the primary name and one randomly selected child name on the first line. So if the person is Jane Smith, I have her spouse listed as Joh
-
How do I get adobe pdf to connect and appear back on Microsoft Oulook next to the help button?
Adobe Acrobat 9 is on most of our computers and is connected to Micrsoft Oulook email because the adobe pdf button is next to the help button in Oulook. For some reason it has disappeared on one of the computers and don't know why and now how do we
-
Implementing AME.B in Accounts Payable
Greetings to All, Would like to find out if anyone has implemented AME.B in AP. Currently I have turned AME on for AP. Secondly I have created a new user called: ame_admin and assigned the following responsibilities to it: Approvals Management Busine
-
Best way to handle tcMultipleMatchFoundException
Can any one tell me what is the best way to handle tcMultipleMatchFoundException during Reconciliaiton. One way which i know is to manually correct the data. Apart form is there any way..? Thanks, Venkatesh.
-
I keep on getting a Microsoft Visual C++ Runtime Error on Elements 9.
I've had this since 2012 and haven't had an issue until last night. I've tried restarting my computer and opening Elements in different ways (directly, through shortcut, and indirectly through a picture). I can't get it to work, and it's now tellin