Remote users cannot log on to a computer that is using cached credentials following password policy expiration

Hi, we are currently having issues with remote users when their AD account flags that their password needs to be changed.
This happens when GPO enforces the user to change their password whilst they are not connected via a 3rd party VPN (OVPN Connect) which relies upon LDAP Authentication. When they next login, LDAP authentication knows that the password should have been changed
and therefore will not allow users to connect securely. Because they cannot connect, they cannot get the Windows prompt to tell them that they need to change their password.
Bit of a vicious circle. Can anyone suggest a work around or tweak for this?
Thanks in advance
I did come across an article but it applies to Windows 2000 http://support.microsoft.com/kb/818088/en-gb any updated versions of this for Windows 7?

> they are not connected via a 3rd party VPN (OVPN Connect) which relies
> upon LDAP Authentication. When they next login, LDAP authentication
> knows that the password should have been changed and therefore will not
You need to use a solution that can handle this situation within the VPN
client (wich yours seemingly cannot)...
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Similar Messages

My kids desabled my mini ipad after several tries to log in. My computer that I used to sincronize it doesn't work anymore and i can't connected to itunes.. How can i restart it without the actual computer that I used before??

My kids desabled my mini ipad after several tries to log in. My computer that I used to sincronize it doesn't work anymore and i can't connected to itunes.. How can i restart it without the actual computer that I used before??

You can use any computer but your data will be lost if you have no backup.

My husband plugged in a password and we don't know what it is and cannot log onto the new computer. How can I reset the password if I can't log on?

My husband was setting up the iMac he got us for Christmas. I already have a MacBook Pro. I do not know the sequence of events but I do know he wanted to use my iTunes account on the iMac so I provided passwords. Now we cannot log onto the computer using any of my passwords. He must have mistyped something. How do we log onto the computer if we can't figure out what the password is?

If it's a new Mac I guess it's running Lion, if so, hopefully this'll help:
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

I cannot log in to a website that I used with FF before I got a new computer. All others seem to be fine

This is the only website so far that will not allow me to login.
www.jacquielawson.com

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
* [[Cookies]]
* [[Enabling and disabling cookies]]

End Users cannot log in to the ccmuser web page.

Greetings,
I have a Call Manager Business Edition that was synched with a customer's AD directory. However, the end users cannot log in to the ccmuser web page with either their AD password or the Call Manager end user PIN.
Any suggestions?
Thanks
George

Thanks for your reply, Aaron.
All users are in the end user group.. I even created a new role/user group that gives users complete read/write access to all end user features. Still no go. I think it is an LDAP issue, but I'm confused because everything else works.

Network users cannot log in to server

I have set up a new server from scratch on a new Macmini. In the main, it works absolutely fine. Users can log into the sever from client device as registered user and can share the screen with no problem.
The users are set up as local network users and are in a local group and a network group. I set them up using Workgroup manager after setting up Open directory. All users cn be seen from OD and WM. However, they cannot log in to the server directly - only the server adminstrator can do that. Home drives etc are all set up fine.
Any help will be greatly appreciated.
F

Administrators always have access, you may have blocked Network Users from having access using Workgroup Manager 10.8.
Open Workgroup Manager 10.8
Authenticate to the local directory as an administrator.
Go to the machines section and select the server where users cannot log in.
Click the preferences icon to see the preferences for that computer set through WM 10.8
From the overview choose Login.
Choose the Access tab and set Manage: to Never.
Message was edited by: Mark23

SAPJSF user cannot log-on to the User Management Engine.

We have a newly installed PI 7.0 system.
SLDCHECK is succussful but if we go to the http://hostname:50100/sld - we are redirected to http://hostname:50100/logon/logonServlet?redirectURL=%2Fwebdynpro%2Fdispatcher%2Fsap.com%2Ftc%7Esld%7Ewd%7Emain%2FMain
When we check the default.trc file, we see the error: User "SAPJSF" is the communication user for the connection between User Management Engine and the ABAP backend system SIDCLNTxyz. This user cannot log-on to the User Management Engine.
The SAPJSF user is not locked in SU01. This user is used by the JCO providers to connect to the gateway service.
We opened Visual Administrator and navigated to Server0 -> Services -> UM Provider
We changed the password property at ume.r3.connection.master.passwd
We then restarted the ABAP and J2EE engine. But we still see this error.
Any help to solve this issue is appreciate.
Jay Malla

Hi,
Please, refer the link below. It says you cannot logon with SAPJSF user to J2EE engine for security reasons.
http://help.sap.com/saphelp_nw2004s/helpdata/en/4e/225b42eeb66255e10000000a155106/frameset.htm
Thanks
R.Murali

OD users cannot log on without server home directory

I am new to OD and am trying to configure a working setup for a few Macs on the network. The server is set up as an OD master, and while we are running Active Directory, the Mac server is not integrated into the AD network. DHCP and DNS are handled by the server that provides AD.
I have set up a few test users and bound a Mac to the OD server for testing. I've found that if I don't specify a home directory for a particular user in workgroup manager (i.e. I just leave it at (none)), the user cannot log on to the bound Mac. The log in window begins to slide as if it is accepting the password, then stops and shakes and brings me back to the login window without any error message. If I specify a home directory on the server, it will then accept the username and password, show that I am logging in as said user, then display the message, "You are unable to log in to the user account [user] at this time. Logging into the account failed because an error occurred."
I'm guessing the error message relates to a permissions issue with the way the home directories are set up. But honestly, I'd rather the users just have their home directories stored locally rather than on the server. How do I configure it so that the users are able to log on and their home directories are stored locally?
Thanks in advance for any assistance that can be provided!

After playing around with the system some more, I found that I had to explicitly specify the local home directory. I set it to /Users/ and everything seems to be working now.

User cannot log into ZCM Agent 11.3.1

We just went through a domain migration. All PCs were unregistered from the old ZCM 11.2 server in the old domain before they were migrated. When we went to re-register them to the 11.3.1 ZCM server, we ran into 2 issues. Some of the systems successfully upgraded to 11.3.1 BUT users cannot log onto the ZCM 11.3.1 Agent. It's giving an error of "unable to log into the network because the login credentials or the server certificate is incorrect". The PCs that didn't not upgraded to ZCM 11.3.1 and are running 11.2.0 do not have this problem. They get authenticated appropriately. The User configuration is set to eDirectory (just like on the ZCM 11.2 server in the old domain).
I ran "zac ci" and noticed there are old certificates from ZENworks servers that are no longer around. How do you get rid of these old references? It's picking up the new server's certificates. I ran this on my PC ZCM Agent 11.2 (won't upgrade and can authenticate into the ZCM 11.2 agent just fine) and I do not see the old certificates. I'm only seeing certificates for the new ZCM 11.3.1 server in the new domain and the eDirectory master server that the ZCM server is referencing.

The old Trusts can be cleared using IE to managed the Trusted Root
Stores. There are some other ways too.
However, Having old ones should not be an issue unless the old and new
Servers have the same name. Not 100% sure matching will cause an issue,
but I think I have seen that before.
It may be possible to automate the removal of the old trusts, but I
would not worry about that until you verify it is an issue by manually
fixing a couple and see if resolves your issue.
Your issue may be something else.
Reinstalling CASA is something else to try.
On 10/9/2014 5:16 AM, hfr63 wrote:
>
> We just went through a domain migration. All PCs were unregistered from
> the old ZCM 11.2 server in the old domain before they were migrated.
> When we went to re-register them to the 11.3.1 ZCM server, we ran into 2
> issues. Some of the systems successfully upgraded to 11.3.1 BUT users
> cannot log onto the ZCM 11.3.1 Agent. It's giving an error of "unable
> to log into the network because the login credentials or the server
> certificate is incorrect". The PCs that didn't not upgraded to ZCM
> 11.3.1 and are running 11.2.0 do not have this problem. They get
> authenticated appropriately. The User configuration is set to
> eDirectory (just like on the ZCM 11.2 server in the old domain).
>
> I ran "zac ci" and noticed there are old certificates from ZENworks
> servers that are no longer around. How do you get rid of these old
> references? It's picking up the new server's certificates. I ran this
> on my PC ZCM Agent 11.2 (won't upgrade and can authenticate into the ZCM
> 11.2 agent just fine) and I do not see the old certificates. I'm only
> seeing certificates for the new ZCM 11.3.1 server in the new domain and
> the eDirectory master server that the ZCM server is referencing.
>
>
Going to Brainshare 2014?
http://www.brainshare.com
Use Registration Code "nvlcwilson" for $300 off!
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Why the remote user cannot open any folds?

Why the remote user cannot open any folds?
I create a user user8 and already grant the user the role connect, OLTP-user, and resource. I also assign this user unlimited space in the user8 tablespace. But after connection, the user8 cannot open any folds and the connection is terninated automaticlly.

Why the remote user cannot open any folds?I don't know what you have.
I don't know what you do.
I don't know what you see.
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.
do as below so we can know complete Oracle version & OS name.
Post via COPY & PASTE complete results of
SELECT * from v$version;

HELP NEEDED - 530 user cannot log in

I'm using CS5.5 and would desperately like some advice over a very odd problem.
For some reason I have a duplicate website showing in DW. It is not on the desktop and doesn't appear in any search.
The original - Cumbria Dog Training, ha sbeen joined by Cumbria Dog Training 2.
I have no idea how this has happened.
I have been validating two items today, one a simple js item and the other is renaming an.htaccess file without the .txt
At the moment, when I try to upload anything from the original, I have the message
FTP error occurred - cannot make connection to host etc.
530 user cannot log in
What does all this mean and what can I do about it.
Many thanks for any advice.
Paul
btw - I also upgraded my server plan today.

Thanks SnakEyez
You're right and I've sorted it out, to the point that I can now upload stuff.
It may sound a dumb question but how - safely - do I remove the duplicate copy, which is showing under "manage sites".
Many thanks
Paul

I am logged in as a 'guest' on a computer that is used by others. I would like to totally hide my browsing history by 'resetting safari' but wonder if this will cause problems for the other users....Or does the resetting just apply to the guest?

I am logged in a computer (that is used by others) as a 'guest'. I would like to completely hide my browsing history and I hear this is done by 'resetting Safari'. My question is, will this mess things up for the other people who logg into use the computer? Or does the resetting apply only to the guest?

Hi Chris
anything, including resetting, that you do as guest should not affect other users who log into their own accounts. Just logging out of guest should remove the obvious history/cookies etc although of course it's possible for an admin of that computer to keep track of some info.

User cannot log in using Opendirectory password but can log in using Crypt

Hi,
We have an Xsan environment with Opendirectory authentication. Most of the users are created in Workgroup manager and home folders are stored on an Xsan volume.
We have noticed (this has happened to two users recently) that sometimes user cannot log in using his password stored in Opendirectory Password server. This is permanent to some specific User/Workstation combination. Other users can log in to the same workstation and this user can log in to other workstations.
Also, if I change password type to Crypt in Workgroup manager, user can log in to this workstation. In past this happened to another user/workstation combination.
I tried to create a new Opendirectory password (password ID has changed in WM), with no success.
Any ideas?
Thanks,
Darius

You say you can log in the web browser right? You can find your username in the following url: https://play.spotify.com/user

HT204370 Purchased and downloaded 5 different movies. Now I cannot run them on the computer that I downloaded them to.( Ipad stills has them) They are not able to locate. This has just happened and I would like to have them on my desktop computer. Any hel

5 Different movies have been deleted from my Itunes account. They have been purchased and downloaded to my Ipad. I cannot watch them on my desktop that I used to download them in the first place. This has just happened over the last week. How can I RE-download them back to my desktop computer. I will need them for my new Ipad3.

Hello gpbondi,
The following article provdies step-by-step instructions for downloading your purchases both in iTunes and on your devices.
Download past purchases
http://support.apple.com/kb/HT2519
Cheers,
Allen

I cannot log into Adobe Reader through my iphone using the Adobe ID and password which work on the w

I cannot log into Adobe Reader through my iphone using the Adobe ID and password which work on the website.

Hi Will,
That's great that you could sign in now.
I think issue you faced in signing was because email verification was not done before. And when you signed from web client, you might have received a note asking you to do verification. It solved the logging issues you were facing on iPhone as well.
-Charu

Remote users cannot log on to a computer that is using cached credentials following password policy expiration

Similar Messages

Maybe you are looking for