Remoted pot overwrites values

After upgrading to Lookout 4.0 an reconfiguring my application to run as a
server client process in Lookout my remoted pots overwrite values in the
OPC connected PLC with zero. This normally should not happen, remoted pots
should receive the value from the remote source. It did not happen in 3.8.
Has somone got a solution?

Make sure that the process.lst file does not exist in the same directory as
the process file when you open and compile the process.lks file. For some
reason, this has solved the problem for us.
"otto" wrote:
>>After upgrading to Lookout 4.0 an reconfiguring my application to run as
a>server client process in Lookout my remoted pots overwrite values in the>OPC
connected PLC with zero. This normally should not happen, remoted pots>should
receive the value from the remote source. It did not happen in 3.8.>Has somone
got a solution?>
John T. Sampson

Similar Messages

  • Overwrite Value from Payload for RCVPOR, Receiver Port

    Dear All,
    Can we overwrite value of receiver port (RCVPOR) from Payload?
    The actual port value (For example SAP<SID>) will be specified in IDOC Receiver adapter.
    If I want to replace this value with say ABC can I do it through mapping?
    I tried using "apply control record from Payload"  for IDOC Receiver communication channel but still the actual port value (SAP<SID>) is going to SAPR3 and not ABC.
    I checked the help.sap.com link as well.
    http://help.sap.com/saphelp_nw04/helpdata/en/13/95244269625633e10000000a155106/frameset.htm
    As per my understandings, RCVPOR value will be picked up only from IDOC Receiver communication channel.
    Can you please suggest?
    Warm Regards,
    Gouri

    Thanks Prateek for replying.
    Even my understanding is same that this value will not be overwritten. But I am not able to find any help.sap.com link or valid SAP Document which will clearly specify this.
    I need to pass this ABC value into IDOC header Record. This value will be required by User as selection criteria while executing WE05 and WE09 reports on SAPR3.
    This ABC value is nothing but the Application name and while executing above standard reports user will be able to differentiate application specific IDOCs if i provide this information in IDOC header .
    Now I spoke to ABAP Team and he suggested to use RCVPOR filed for thsi purpose as it is present in selection screen of both WE05 and WE09 report.
    So I wanted a confirmation through official document that we wont be able to use this field.

  • Overwrite Value help error message

    Hi Experts,
    I want to overwrite the error message given by value help of an input field.
    Currently its showing the default error message when the selected value does not exist in value help as "String "56fds65fs" does not match the enumeration"
    Can i overwrite this message with my custom message as
    "Data not found for the given selection"?
    Regards,
    Ashish Shah

    Hi Guys,
    There is a solution to this problem.
    using the following tutorial.
    [A Simple Input Form with Message and Error Service Support|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/webdynpro/wd%20java/wdjava%20archive/a%20simple%20input%20form%20with%20message%20and%20error%20service%20support.pdf]
    i generated the error message using
    wdThis.wdGetAPI().getComponent().getMessageManager().
    reportContextAttributeMessage(
    this.wdContext.currentContextElement(),
                             attributeInfo,
                             IMessageWD_TutComp.MISSING_INPUT,
                             new Object[] { fieldLabel },
                             true);
    and raised the error as
    wdThis.wdGetAPI().getComponent().getMessageManager().raisePendingException();
    Regards,
    Ashish Shah

  • Bapi to overwrite values in IM 35 transaction.

    I am using bapi BAPI_EXPENDITUREPROGTREE_CHVAL to put values into the transaction IM35.
    The  amount / values for the corresponding fiscal year are being 'added' to the existing values .
    Instead of that  I want the values to be overwritten. Can you suggest any other Bapi to overwrite the 
    existing values .

    Hi,
    For detail click on the this link:
    Re: Credit to AuC
    This will solve your problem.
    Regards
    Javed

  • How do you overwrite values in a ring control?

    Hello,
    I have a Ring Control (Text Values) in Labview 2009 and it is programatically populated with 20 items. The end user either selects from the items in the list or populates it with a new item based on a checkbox for adding new item. What I want to do is when the 20th item is entered and the user selects the checkbox for item 21 to be added I would like to rap around to the first item in the list and overwrite it. Is this possible and a sample vi would be great to demonstrate how this is done. Any help would be greatly appreciated!
    Thanks in Advance
    Charlie
    Everything is Free! Until you have to pay for it.
    Solved!
    Go to Solution.

    Replace Array Subset.  You will need to keep track of which item to replace in a shift register.  I would also keep the list in a shift register to make your life a little easier.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Remote PowerShell Error: Value cannot be null

    I am trying to run commands on our exchange server from another server, and I keep running into this problem regard less of the command I run.  For example I am trying to run the New-MailboxExportRequest and I alway get the error "Value cannot be null."
     If I run the command from the exchange server console it works fine.
    the client machine is Server 2008 (x86) and the server is Server 2008 R2 (x64).
    Here is the exact log of what I am doing
    Windows PowerShell
    Copyright (C) 2009 Microsoft Corporation. All rights reserved.
    PS C:\Users\Administrator> Enter-PSSession -computerName SAM
    [sam]: PS C:\Users\Administrator\Documents> Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010
    [sam]: PS C:\Users\Administrator\Documents> new-mailboxexportRequest
    cmdlet New-MailboxExportRequest at command pipeline position 1
    Supply values for the following parameters:
    Mailbox: eric
    FilePath: C:\Test\eric.pst
    Value cannot be null.
    Parameter name: parameters
    + CategoryInfo :
    + FullyQualifiedErrorId : System.ArgumentNullException,Microsoft.Exchange.Management.RecipientTasks.NewMailboxExportRequest
    [sam]: PS C:\Users\Administrator\Documents>
    It seems that almost all the exchange commands do not work using this connection method.  Can any one tell me what I am missing?

    Have the remote powershell ever worked before?
    Have you tried to use the procedure in the article below to connect the remote exchange server?
    Connect Remote Exchange Management Shell to an Exchange Server
    James Luo
    TechNet Subscriber Support (http://technet.microsoft.com/en-us/subscriptions/ms788697.aspx)
    If you have any feedback on our support, please contact [email protected]

  • New Tab overwrites Values in Previous Tab

    My basic setup is a main Panel that can hold a number of tabbed panels.
    Each tabbed panel has only one scrollpane, which is populated by a table.
    The number of tabs is dynamic, and added on the fly.
    Adding new tabs works fine, naming is correct.
    The issue I encounter is that the results in the table 1, scrollpane 1 get overwritten immediately with the creation of the new tab.
    So if i end up with 3 tabs, they all ahve the same data, even though I can watch them populate with the correct data.
    I hope that was understandable., heres a piece of the code i believe the culprit.
    private void createStatusTab(Object[][] results,int cacheNumber) {
                 // some reason second tab overwirtes bvalyues for both...
                   // TODO Auto-generated method stub
                 //for(int cc=1;cc<=cacheNumber;cc++){
                           // make new tab
                           JPanel cacheResultsPanel = new JPanel();
                           GridBagLayout layout = new GridBagLayout();
                           cacheResultsPanel.setLayout(layout);
                           outputPanel.addTab("", cacheResultsPanel);
                           DateFormat dateFormat = new SimpleDateFormat(
                                   "MM/dd/yyyy 'at' hh:mm a z");
                           String dateTime = dateFormat.format(Calendar.getInstance().getTime());
                           outputPanel.addTab("Cache Cleared - Results: "+environment.getName(),cacheResultsPanel);
                           outputPanel.setSelected(cacheResultsPanel);
                           JPanel progressSubPanel = new JPanel();
                           GridBagConstraints c = new GridBagConstraints();
                           c.gridx = 0;
                           c.gridy = 0;
                           //c.weightx= 1.0;
                           //c.weighty= 1.0;
                          /* cacheResultsPanel.add(progressSubPanel, c);
                           progressSubPanel.add(new JLabel("Progress:"));
                           progressSubPanel.add(progressBar);
                           progressBar.setValue(0);
                           progressBar.setStringPainted(true);*/
                          outputPanel.addTab("Cache "+cacheNumber,cacheResultsPanel);
                          outputPanel.setSelected(cacheResultsPanel);
                          // works but uses one panel
                         JScrollPane tempPane= fillTable(results);
                          cacheResultsPanel.add(tempPane);
                          cacheResultsPanel.updateUI();   
                          LOG.debug("Tab: "+cacheNumber+" Added");
                 //}// end for each cache
              }the filltable method where the scrollpane is created froma table.
    private JScrollPane fillTable(Object[][] finalResults) {
                   // TODO Auto-generated method stub
                 Object[] columns =cacheDetails.keySet().toArray();
                  resultsTable=new JTable(finalResults,cacheDetails.keySet().toArray());
                  LOG.debug(cacheDetails.keySet().toString());
                  LOG.debug(cacheDetails.values().toArray().length);
                 resultsTable.setDragEnabled(true);
                 resultsTable.setPreferredScrollableViewportSize(new Dimension(700,400));
                 resultsTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
                 resultsTable.setAutoscrolls(true);
                 //set column sizes
                 TableColumn column = null;
                 int size=cacheDetails.size();
                 for (int i = 0; i < size; i++) {
                      //int length=finalResults[0].toString().length()*8;
         int headerLength=columns[i].toString().length()+1;
         int detailLength=finalResults[0][i].toString().length()+1;
         int length=0;
         if(headerLength>detailLength){
              length=(headerLength)*8;
         }else{
              length=(detailLength)*8;
    column = resultsTable.getColumnModel().getColumn(i);
    column.setPreferredWidth(length);
    JScrollPane scrollPane=new JScrollPane(resultsTable,JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
    return scrollPane;
               i end up with all tabs being filled with the same scroll panel. how do i make them independent and dynamic like the tabs.  is the table or the scrollpane the culprit?
    Thanks!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    I made a new class called TabBuilder. TYhis class is called as a new instance everytime i call it.
    Stilll I have issues,
    class TabBuilder{
             public void createStatusTab(Object[][] results,int cacheNumber) {
             // some reason second tab overwirtes bvalyues for both...
              // TODO Auto-generated method stub
                      // make new tab
                      JPanel cacheResultsPanel = new JPanel();
                      GridBagLayout layout = new GridBagLayout();
                      cacheResultsPanel.setLayout(layout);
                      outputPanel.addTab("", cacheResultsPanel);
                      DateFormat dateFormat = new SimpleDateFormat(
                              "MM/dd/yyyy 'at' hh:mm a z");
                      String dateTime = dateFormat.format(Calendar.getInstance().getTime());
                      outputPanel.addTab("Cache Cleared - Results: "+environment.getName(),cacheResultsPanel);
                      outputPanel.setSelected(cacheResultsPanel);
                      JPanel progressSubPanel = new JPanel();
                      GridBagConstraints c = new GridBagConstraints();
                      c.gridx = 0;
                      c.gridy = 0;
                      //c.weightx= 1.0;
                      //c.weighty= 1.0;
                     /* cacheResultsPanel.add(progressSubPanel, c);
                      progressSubPanel.add(new JLabel("Progress:"));
                      progressSubPanel.add(progressBar);
                      progressBar.setValue(0);
                      progressBar.setStringPainted(true);*/
                     outputPanel.addTab("Cache "+cacheNumber,cacheResultsPanel);
                     outputPanel.setSelected(cacheResultsPanel);
                     // works but uses one panel
                    JScrollPane tempPane= fillTable(results);
                     cacheResultsPanel.add(tempPane);
                     cacheResultsPanel.updateUI();   
                     LOG.debug("Tab: "+cacheNumber+" Added");
             }// end mehtosd
             private JScrollPane fillTable(Object[][] finalResults) {
                   // TODO Auto-generated method stub
                 Object[] columns =cacheDetails.keySet().toArray();
                  resultsTable=new JTable(finalResults,cacheDetails.keySet().toArray());
                  LOG.debug(cacheDetails.keySet().toString());
                  LOG.debug(cacheDetails.values().toArray().length);
                 resultsTable.setDragEnabled(true);
                 resultsTable.setPreferredScrollableViewportSize(new Dimension(700,400));
                 resultsTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
                 resultsTable.setAutoscrolls(true);
                 //set column sizes
                 TableColumn column = null;
                 int size=cacheDetails.size();
                 for (int i = 0; i < size; i++) {
                      //int length=finalResults[0].toString().length()*8;
         int headerLength=columns[i].toString().length()+1;
         int detailLength=finalResults[0][i].toString().length()+1;
         int length=0;
         if(headerLength>detailLength){
              length=(headerLength)*8;
         }else{
              length=(detailLength)*8;
    column = resultsTable.getColumnModel().getColumn(i);
    column.setPreferredWidth(length);
    JScrollPane scrollPane=new JScrollPane(resultsTable,JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
    return scrollPane;
    }// tab builder class
    Calling CodeTabBuilder newTab= new TabBuilder();
                   newTab.createStatusTab(finalResults, i);Edited by: Masterkeedu on Oct 15, 2007 8:09 AM
    Stupid { code } tags..honestly, stupid.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Lookout 4.5 Pot Value vs 3.8 Pot Remote

    Problem: When I convert a 3.8 Program to 4.5, I have about 60 Pots (the example below is a basic example of the Pot) that should change to a value of 1 when pb1 is pushed and 2 when pb2 is pushed, otherwise it retains its current value. With 4.5 about ? of these 60 pots will change value as long as the Pb1 or Pb2 buttons is pushed. When the button is released the pot will go back to its previous setting.
    Is it correct in 4.5 to have a pot look at itself? I get the same results if I use the native 4.5 Pot or the Pot38.cbx with the remote settings.
    Ie.
    V3.8
    Pot1 Remote setting:
    Nif(pb1,0,nif(pb2,1,Pot1))
    V4.5 (using the Pot38.cbx)
    Pot1 Remote setting:
    Nif(pb1,0,nif(pb2,1,Pot1))
    V4.5
    Pot1 Remote setting: None
    Valu
    e= Nif(pb1,0,nif(pb2,1,Pot1))

    There seams to be something associated when trying to reference the "read" values of a POT. In my previous example if the POT.VALUE = nif(pb1,1,nif,pb2,2,POT)things will not work but if I change it to POT.VALUE = nif(pb1,1,nif,pb2,2,POT.VALUE) then things are fine. It is my understanding that there is not a difference between POT and POT.VALUE when referencing the POT as a READ function. But again this only happens sometimes?

  • Internal error while overwriting a charecteristic value in a class

    Hi,
    I am overwriting a charecteristic value in a class with a change master.
    In CL02 I entered the class and the chnage number and entered in edit mode.
    Then I selected the charecteristic view and selected the specific charectristic which value I need to overwrite and then clicked on "Overwrite Value" button.
    Now the system has found an internal error: the required characteristic data was not found in characteristics maintenance.
    Charecteristic data not found: Internal Error
    Please tell me how can I get out of this error.

    hi,
    Please check whether the overwriting indicator check box in character tab is select or not.
    It should be flagged.
    Thanks & regards
    Reddiy.

  • Unable to syndicate same Remote System with differnt value

    Hi,
    I am working on MDM 7.1 SP05 and I have the following issue with syndication:
    I have a remote system table (Key Enabled) with System as Non-Qualifier and value as Qualifier and I have values in the MDM Datamanager as
    MDM ID, Remotesystem (Multivalue Qualifier Table with Key Enabled)
    111,((Qual1-Key,Val1),(Qual1-Key,Val2),(Qual1-Key,Val3))
    When I syndicate I see only one value as 111, (Qual1,Val3)... But I want to have all the Qualifiers-Key with multiple values.. Where as in MDM 5.5 I can see all the Qualifiers with out any issues..Is this a restriction in MDM 7.1?
    If I map System instead of Remote Key of Qualifier Table then I can see multiple times of same remote system with appropriate values.. But If I map remote key then I see the consolidated/the latest system-remote key wiht value... But I want system-remote key value appear multiple times...
    Thanks alot
    Rajeev

    I am using customised...
    Did you tried syndicating Remote key of that table or the field of the Qualifer table?
    I am able to syndicate out with the system field and values.. But I want to syndicate out the multiple values wiht remote key of the table..
    As mentioned Remote keys are AAA and BBB for System Sys1 and Sys2..
    First I imported remote system table with Sys1 and Sys2 with remote Keys as AAA and BBB. then along wiht main table record I imported Sys1 and Sy2...
    While Syndicating I want to syndicate AAA and BBB values along with Value field...
    Suppose:
    I have data :
    MDM ID, RemoteSystem(System, Value)
    111, ((Sys1,Val1),(Sys1,Val2),(Sys1,Val3),(Sys2,Val1))
    Remote Keys for Sys1AAA and Sys2BBB
    In the Syndication Manager I mapped as below: RemoteSystems RemoteKey and value are mapped to target...
    RemoteSystem
    --RemoteKey
    System(DFNQ)
    --Value(Qualifier)
    I mapped RemoteKey and Value to the target fields.. Which is a XML output..
    <REMOTE_SYSTEM>
    - <Z_MDM_REMOTE_SYSTEM >
    <Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
    <Z_MDM_VALUE>Val3</Z_MDM_VALUE>
    </Z_MDM_REMOTE_SYSTEM>
    - <Z_MDM_REMOTE_SYSTEM >
    <Z_MDM_SYSTEM_NAME>BBB</Z_MDM_SYSTEM_NAME>
    <Z_MDM_VALUE>Val1</Z_MDM_VALUE>
    </Z_MDM_REMOTE_SYSTEM>
    </REMOTE_SYSTEM>
    Where I need the following Output:
    <REMOTE_SYSTEM>
    - <Z_MDM_REMOTE_SYSTEM >
    <Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
    <Z_MDM_VALUE>Val1</Z_MDM_VALUE>
    </Z_MDM_REMOTE_SYSTEM>
    - <Z_MDM_REMOTE_SYSTEM >
    <Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
    <Z_MDM_VALUE>Val2</Z_MDM_VALUE>
    </Z_MDM_REMOTE_SYSTEM>
    - <Z_MDM_REMOTE_SYSTEM >
    <Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
    <Z_MDM_VALUE>Val3</Z_MDM_VALUE>
    </Z_MDM_REMOTE_SYSTEM>
    - <Z_MDM_REMOTE_SYSTEM >
    <Z_MDM_SYSTEM_NAME>BBB</Z_MDM_SYSTEM_NAME>
    <Z_MDM_VALUE>Val1</Z_MDM_VALUE>
    </Z_MDM_REMOTE_SYSTEM>
    </REMOTE_SYSTEM>
    Any inputs.
    Thanks
    Rajeev

  • Lookout remote object behavior

    I want to know if there is a better solution to remote an object in a server
    process than the one I had to use. Let's suppose I have a PotA in a server
    process that have his value property connected to an expression or to
    another object (let' say it PotA Input Connection). Also, the value property
    of PotA serves as origin to the value property of another object (PotA
    Output Connection). If I had to control this PotA object from a client
    process with a remote source url, Lookout says "the remote object is not
    writable". This leaves the remote connection as unidirectional.
    To solve this I must to connect the value of the remote pot (RemotePotA) to
    the value of PotA in the server process, but also I had to connect the value
    property of PotA to the value property in the client process, sharing the
    value expression with the one if have previously. At this moment, I have
    lost the client process machine independence, because the server process is
    now locked to an specific client. Wrong way.
    But I have another way to do it, that seems to me a way to fool Lookout
    read-only check of objects. In the server process I create PotA as described
    before, and PotB. I set the remote property of PotA to PotB in the same
    server process. And voil�, I can use the remote property of RemotePotA in
    the client to connect to PotB in the server process.
    I had to do this for a great number of objects in a project (around 100) and
    now I've noticed that this slows the Lookout application a lot, specially
    the screen refresh, but I'm not sure if is this behavior is the origin of
    the decreased speed.
    Well, about this I have three questions:
    1) This way to construct remoted object is correct?. There is no unexpected
    event loopings?
    2) If the contruct is correct, why Lookout not let to remote directly the
    PotA object without all this complications? In fact, I'm modifying a
    property by an indirect method, and if it works why not remove the read-only
    checking?
    3) If the construct generates unexpected events and it's an undesirable way
    to do this, how can I remote a Pot which have a value property connected to
    an expression or another object to control it from a client process?
    Maybe anyone can give me some light about this question...
    Thanks
    Joaquin Villanueva
    T-Systems

    First of all, I am having some trouble following your explanation, but I think I have a general idea. Any time you use a connection it is a one way street as you found out, you should use the URL. Even though both pots are local, you can make pot B the URL in pot A's object properties and leave pot B as local control. This allows two way data transfer. I hope this helps, but if it doesn't let me know.

  • Vbscript RegRead function not behaving consistently and/or returning correct values when they exist in the registry

    Hello.
    I seem to be having a problem using the RegRead function within vbscript to return a simple value from the registry. When I run it on my workstation (windows 7 x64 sp1), it seems to miss certain registry values that are indeed there (specifically, I am looking
    for instances of "Adobe" in the displayName value of HKLM\Software\wow6432node\microsoft\windows\uninstall). However, when I run on a test VM, it returns the values fine. I am hoping someone might be able to explain this inconsistency and why it
    is happening.
    The code is very simple:
    On Error Resume Next
    if wscript.arguments.count < 1 then
    wscript.echo "usage: regread.vbs <hostname> <appname>"
    wscript.quit
    end if
    AppName = wscript.arguments(1)
    strComputer = wscript.arguments(0)
    const HKEY_LOCAL_MACHINE = &H80000002
    Set WshShell = WScript.CreateObject("WScript.Shell")
    Set objReg=GetObject("winmgmts:{impersonationLevel=impersonate}!//"& strComputer & "/root/default:StdRegProv")
    strKeyPath = "SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall"
    objReg.EnumKey HKEY_LOCAL_MACHINE, strKeyPath, arrSubKeys
    For Each subkey In arrSubKeys
    'wscript.echo subkey
    InstalledAppName = ""
    InstalledAppName = WshShell.RegRead("HKLM\" & strKeyPath & "\" & subkey & "\DisplayName")
    wscript.echo vbtab&"DisplayName: "&InstalledAppName
    if instr(InstalledAppName,AppName) > 0 then
    wscript.echo vbcrlf&"found"&vbcrlf
    end if
    Next
    When I run "cscript regread.vbs remoteHost Adobe" on my local machine, it does not "find" any instance of Adobe within the registry of machine "remoteHost". However, when I run it from a test VM, it does find the existing instances
    of Adobe within the DisplayName value of the uninstall key of the registry, here is the output from both, first the non-working one, then the working test VM.
    Non-working:
    Microsoft (R) Windows Script Host Version 5.8
    Copyright (C) Microsoft Corporation. All rights reserved.
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: GPL Ghostscript 8.60
    DisplayName: GPL Ghostscript Fonts
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: Microsoft Office Professional Plus 2010
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: Microsoft ASP.NET 2.0 AJAX Extensions 1.0
    DisplayName:
    DisplayName: Sybase PowerBuilder 12.0 Standard Runtime
    DisplayName: MSXML 4.0 SP3 Parser
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: MSXML 4.0 SP3 Parser (KB2758694)
    DisplayName: Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: Microsoft Windows Journal Viewer
    DisplayName: Java Auto Updater
    DisplayName: VBA (2627.01)
    DisplayName: Microsoft Visual C++ 2005 Redistributable
    DisplayName:
    DisplayName: Apple Software Update
    DisplayName: SQL Anywhere 9 for Windows x64
    DisplayName: Microsoft Office Professional Plus 2010
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: Update for Microsoft Office 2010 (KB2553267) 32-Bit Edition
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: Update for Microsoft Office 2010 (KB2760631) 32-Bit Edition
    DisplayName:
    DisplayName:
    DisplayName: Update for Microsoft Office 2010 (KB2494150)
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\{90140000-0011-0000-0000-0000000FF1CE}_Office14.PROPLUS_{9569DE03-1425-4D12-96EB-44D852AF759A}\DisplayName
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: Update for Microsoft Office 2010 (KB2553065)
    DisplayName:
    DisplayName: Security Update for Microsoft Office 2010 (KB2598243) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2825640) 32-Bit Edition
    DisplayName:
    DisplayName: Update for Microsoft Outlook Social Connector 2010 (KB2553406) 32-Bit Edition
    DisplayName: Security Update for Microsoft Office 2010 (KB2553371) 32-Bit Edition
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: Security Update for Microsoft Office 2010 (KB2589320) 32-Bit Edition
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: Update for Microsoft Office 2010 (KB2596964) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2566458)
    DisplayName:
    DisplayName:
    DisplayName: Microsoft Office Access MUI (English) 2010
    DisplayName:
    DisplayName: Microsoft Office Excel MUI (English) 2010
    DisplayName:
    DisplayName: Microsoft Office PowerPoint MUI (English) 2010
    DisplayName:
    DisplayName:
    DisplayName: Microsoft Office Publisher MUI (English) 2010
    DisplayName:
    DisplayName: Microsoft Office Outlook MUI (English) 2010
    DisplayName: Update for Microsoft Outlook Social Connector 2010 (KB2553406) 32-Bit Edition
    DisplayName:
    DisplayName:
    DisplayName: Microsoft Office Word MUI (English) 2010
    DisplayName:
    DisplayName: Microsoft Office Proof (English) 2010
    DisplayName:
    DisplayName:
    DisplayName: Microsoft Office Proof (French) 2010
    DisplayName:
    DisplayName:
    DisplayName: Microsoft Office Proof (Spanish) 2010
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: Microsoft Office Proofing (English) 2010
    DisplayName:
    DisplayName: Microsoft Office InfoPath MUI (English) 2010
    DisplayName:
    DisplayName: Microsoft Office Shared MUI (English) 2010
    DisplayName:
    DisplayName:
    DisplayName: Update for Microsoft Office 2010 (KB2553310) 32-Bit Edition
    DisplayName: Microsoft Office OneNote MUI (English) 2010
    DisplayName:
    DisplayName: Update for Microsoft OneNote 2010 (KB2553290) 32-Bit Edition
    DisplayName: Microsoft Office Groove MUI (English) 2010
    DisplayName:
    DisplayName: Microsoft Office Shared Setup Metadata MUI (English) 2010
    DisplayName:
    DisplayName:
    DisplayName: Microsoft Office Access Setup Metadata MUI (English) 2010
    DisplayName:
    DisplayName: Microsoft Office Visio Viewer 2003 (English)
    DisplayName: Cardiff TeleForm
    DisplayName:
    DisplayName:
    DisplayName: CodeMax Runtime Installer
    DisplayName: Microsoft .NET Framework 1.1
    DisplayName:
    DisplayName:
    DisplayName: Microsoft XML Parser
    DisplayName:
    DisplayName: Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    Working:
    Microsoft (R) Windows Script Host Version 5.8
    Copyright (C) Microsoft Corporation. All rights reserved.
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: DYMO Label v.8
    DisplayName:
    DisplayName: GPL Ghostscript 8.60
    DisplayName: GPL Ghostscript Fonts
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: Microsoft Office Professional Plus 2010
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: Microsoft ASP.NET 2.0 AJAX Extensions 1.0
    DisplayName: Adobe Flash Player 11 Plugin
    found
    DisplayName: Sybase PowerBuilder 12.0 Standard Runtime
    DisplayName: MSXML 4.0 SP3 Parser
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: MSXML 4.0 SP3 Parser (KB2758694)
    DisplayName: Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148
    DisplayName: Cisco WebEx Meeting Center for Internet Explorer
    DisplayName: Configuration Manager Client
    DisplayName: Java 7 Update 51
    DisplayName: Citrix Online Launcher
    DisplayName: MSXML 4.0 SP3 Parser (KB2721691)
    DisplayName: Microsoft Windows Journal Viewer
    DisplayName: Java Auto Updater
    DisplayName: VBA (2627.01)
    DisplayName: Microsoft Visual C++ 2005 Redistributable
    DisplayName: Microsoft Visual C++ 2005 Redistributable
    DisplayName: Apple Software Update
    DisplayName: SQL Anywhere 9 for Windows x64
    DisplayName: Microsoft Office Professional Plus 2010
    DisplayName: Update for Microsoft Filter Pack 2.0 (KB2810071) 32-Bit Edition
    DisplayName: Security Update for Microsoft Office 2010 (KB2826035) 32-Bit Edition
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Update for Microsoft Office 2010 (KB2553267) 32-Bit Edition
    DisplayName: Update for Microsoft PowerPoint 2010 (KB2553145) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2589375) 32-Bit Edition
    DisplayName: Security Update for Microsoft Office 2010 (KB2687276) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2760631) 32-Bit Edition
    DisplayName: Update for Microsoft OneNote 2010 (KB2810072) 32-Bit Edition
    DisplayName: Security Update for Microsoft InfoPath 2010 (KB2687422) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2494150)
    DisplayName: Security Update for Microsoft Office 2010 (KB2687423) 32-Bit Edition
    DisplayName: Security Update for Microsoft Office 2010 (KB2597986) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2794737) 32-Bit Edition
    DisplayName: Update for Microsoft SharePoint Workspace 2010 (KB2589371) 32-Bit Edition
    DisplayName: Security Update for Microsoft Publisher 2010 (KB2553147) 32-Bit Edition
    DisplayName: Security Update for Microsoft Office 2010 (KB2850016) 32-Bit Edition
    DisplayName: Definition Update for Microsoft Office 2010 (KB982726) 32-Bit Edition
    DisplayName: Security Update for Microsoft InfoPath 2010 (KB2760406) 32-Bit Edition
    DisplayName: Update for Microsoft Visio Viewer 2010 (KB2810066) 32-Bit Edition
    DisplayName: HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\{90140000-0011-0000-0000-0000000FF1CE}_Office14.PROPLUS_{9569DE03-1425-4D12-96EB-44D852AF759A}\DisplayName
    DisplayName: Update for Microsoft Office 2010 (KB2767886) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2597087) 32-Bit Edition
    DisplayName: Security Update for Microsoft Office 2010 (KB2687510) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2553065)
    DisplayName: Update for Microsoft Access 2010 (KB2553446) 32-Bit Edition
    DisplayName: Security Update for Microsoft Office 2010 (KB2598243) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2825640) 32-Bit Edition
    DisplayName: Security Update for Microsoft Visio 2010 (KB2810068) 32-Bit Edition
    DisplayName: Update for Microsoft Outlook Social Connector 2010 (KB2553406) 32-Bit Edition
    DisplayName: Security Update for Microsoft Office 2010 (KB2553371) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2826026) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2589298) 32-Bit Edition
    DisplayName: Security Update for Microsoft Excel 2010 (KB2826033) 32-Bit Edition
    DisplayName: Security Update for Microsoft Office 2010 (KB2589320) 32-Bit Edition
    DisplayName: Security Update for Microsoft Word 2010 (KB2863902) 32-Bit Edition
    DisplayName: Security Update for Microsoft Office 2010 (KB2826023) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2760598) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2596964) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2566458)
    DisplayName: Update for Microsoft Office 2010 (KB2589352) 32-Bit Edition
    DisplayName: Security Update for Microsoft Outlook 2010 (KB2837597) 32-Bit Edition
    DisplayName: Microsoft Office Access MUI (English) 2010
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Microsoft Office Excel MUI (English) 2010
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Microsoft Office PowerPoint MUI (English) 2010
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Update for Microsoft PowerPoint 2010 (KB2553145) 32-Bit Edition
    DisplayName: Microsoft Office Publisher MUI (English) 2010
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Microsoft Office Outlook MUI (English) 2010
    DisplayName: Update for Microsoft Outlook Social Connector 2010 (KB2553406) 32-Bit Edition
    DisplayName: Update for Microsoft Outlook 2010 (KB2687623) 32-Bit Edition
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Microsoft Office Word MUI (English) 2010
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Microsoft Office Proof (English) 2010
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Update for Microsoft Office 2010 (KB2850079) 32-Bit Edition
    DisplayName: Microsoft Office Proof (French) 2010
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Update for Microsoft Office 2010 (KB2850079) 32-Bit Edition
    DisplayName: Microsoft Office Proof (Spanish) 2010
    DisplayName: Update for Microsoft Office 2010 (KB2850079) 32-Bit Edition
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Update for Microsoft Filter Pack 2.0 (KB2810071) 32-Bit Edition
    DisplayName: Update for Microsoft OneNote 2010 (KB2810072) 32-Bit Edition
    DisplayName: Update for Microsoft SharePoint Workspace 2010 (KB2589371) 32-Bit Edition
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Update for Microsoft Office 2010 (KB2760598) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2589352) 32-Bit Edition
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Microsoft Office Proofing (English) 2010
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Microsoft Office InfoPath MUI (English) 2010
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Microsoft Office Shared MUI (English) 2010
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Security Update for Microsoft Office 2010 (KB2553284) 32-Bit Edition
    DisplayName: Update for Microsoft Office 2010 (KB2553310) 32-Bit Edition
    DisplayName: Microsoft Office OneNote MUI (English) 2010
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Update for Microsoft OneNote 2010 (KB2553290) 32-Bit Edition
    DisplayName: Microsoft Office Groove MUI (English) 2010
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Microsoft Office Shared Setup Metadata MUI (English) 2010
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Microsoft Office Access Setup Metadata MUI (English) 2010
    DisplayName: Microsoft Office 2010 Service Pack 1 (SP1)
    DisplayName: Microsoft Office Visio Viewer 2003 (English)
    DisplayName: Cardiff TeleForm
    DisplayName: Adobe Acrobat XI Pro
    found
    DisplayName: QuickTime
    DisplayName: CodeMax Runtime Installer
    DisplayName: Microsoft .NET Framework 1.1
    DisplayName: WinZip 15.0
    DisplayName: McAfee VirusScan Enterprise
    DisplayName: Microsoft XML Parser
    DisplayName: McAfee Agent
    DisplayName: Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName:
    DisplayName: Apple Application Support
    Does anyone know why this might be happening? The only main difference is that the machine that the script does not work on, has visual studio 2013 installed.
    Please help

    Well I think we can agree that it is not supported remotely. Because while it did initially work remotely, it didnt behave consistently; that is, it worked on the VM, but not my desktop. That's the whole reason I created this thread. Sorry if you are confused,
    but I most certainly was not lying and not trying to troll the forum or whatever it is you are insuinuating. Chill out a little bit and maybe you might get that Microsoft MVP.
    I am trying to get you t understand why what you are saying is wrong.  You may have thought it worked but there were a number of things that make it impossible to actually work.
    You were enumerating a remote key.  You were using that key name with RegRead and it was looking up the local value.  That is why it could not find remote keys and values.  The local and remote machines will not match on all keys.
    The correct call is the "GetStringValue" of the registry provider because it is the only call that can read remote values. My point is that you were fooling yourself by thinking that it ever actually worked.  If anything it was just dumb luck
    that the keys would match. 
    So maybe you weren't actually lying but you were surely foolingyourself and confusing us.
    Anyway - glad you fixed it and just remember to not mix calls like you did.  Also don't use On Error Resume Next unless you plan on test every call for an error.
    ¯\_(ツ)_/¯

  • MRP Indicator while making a GRN : Difference in GR/IR value.

    Hi, 
      I am trying to make a GR for an imported material against a foreign PO. There is a MRP Indicator Check box in Excise Tab's Additional Input button.
    The issue is that
        1. When I mark the MRP Indicator ( In excise tab - Addition Input button ) then the GR/IR values are shown different after MIRO. But if we do not tick that then the values shown are correct and same as posted.
       2.. When I do not mark then system prevents me from changing the Excise values ( i have created CVD already ) and keeps overwriting values with some other value each time i change and press return.
    Can anyone help on what is this MRP indicator meant for & used for and what are its implications.
    Thanks.

    hi
    the MRP indicator is use in trading scenario
    means ur taking goods from first stage dealer for which u will get excise values at time of GR and not at time of PO
    so at time of PO u will have total value including excise and u dont know the amount of excise duty in that
    check following u will get idea
    This is Traders pass-on scenario.
    E.g.:
    Material Price = 80/-
    Excise Duty = 14/- (BEDECessSECess)
    Margin = 6/-
    Total =100/-
    VAT @3% = 3/-
    Grand Total =103/-
    Step 1:
    Create PO with Base Price as 100/- by selecting tax code which is having VAT as 3% (Total PO value will be 103/-)
    Step 2:
    Post MIGO and Capture Excise Part - 1
    Click on More details icon in Excise tab (header), check MRP Indicator in miscellaneous tab, Enter Assessable value as 80 in Excise tab Item level and enter the excise values BED, ECess , SECess manually, check & save the document.
    Step 3;
    Post Excise Part 2 in J1IEX
    Step 4:
    Post MIRO by checking calculate tax, edit base value as 80/- enter the amount in header as proposed by the system (103/-), simulate & post the document.
    check note no 1104456  at SERVICE.SAP.COM
    regards
    kunal

  • Value mapping in Syndicator

    Hi,
    I would like to syndicate my  source data to 3 remote systems.
    Could you please help me to how to value map for a field to 3  remote systems. like for the same field Phone if remote system ABC then it should P123 if remote system BCD then it should be H456 if remote system CDE then it should be K789.
    Could you please help in this regard.
    Thanks you in advance.
    Kiran.G

    Hi Kiran,
    As per your requirement
    like for the same field Phone if remote system ABC then it should P123 if remote system BCD then it should be H456 if remote system CDE then it should be K789.
    - What ever value you store in the field Phone in MDM  only that values will go to the remote system.So if your MDM data manger has P123 series under the phone field only this value can go to all three remote systems.
    - The purpose of the feature of multiple syndication to multiple remote sytems is in the case of consolidation of master records in case of duplicates.
    - When you merge records coming from 3 diff remote sytems into one record after identifying them as duplicate records
    ie for eg 1 rec is having phone P123 and the other is having A123 both are coming from 2 separate remote sytem as diff rec but in MDM they are identified as duplicate rec then we assign one of the phone number as global phone and this global info is syndicated to both teh systems.
    - For this in MDM syndicator you need to map two fields Remote key and value from source to destination
    - By doing this mapping the Remote system field will have the remote system name and the value will have the local phone number.
    What you want can be achieved using Assignment.
    maintain a field in MDM storing the remote system name and based on that name assign the phone key.
    Hope it helps
    Kindly reward points if found useful
    Thanks
    Simona

  • Error JBO-33003 ADF Business component as an EJB remote

    Hi,
    I need to deploy an ADF application (model in business component and view in ADF Faces) in a multi-tier architecture. I deployed the MODEL project (bc4j) in an OAS’s OC4J instance. Now, when I try to test de application I get the following error:
    oracle.jbo.ConfigException: JBO-33003: Connection name <my_conn_to_oas> not defined.
    Also, I tried to connect to de EJB session from my VIEW project, so I changed the file DataBindings.cpx. I changed the line Configuration="AMProyectosLocal" to Configuration="AMProyectosAS_DS".
    When I run the view project I get the same error:
    500 Internal Server Error
    oracle.jbo.ConfigException: JBO-33003: Connection name AppServerPenny not defined
         at oracle.jbo.client.Configuration.initializeFromConnectionName(Configuration.java:1103)
         at oracle.jbo.client.Configuration.getConfiguration(Configuration.java:538)
         at oracle.jbo.client.Configuration.getConfiguration(Configuration.java:461)
         at oracle.jbo.client.Configuration.getConfiguration(Configuration.java:436)
         at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:287)
         at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:539)
         at oracle.jbo.common.ampool.ContextPoolManager.findPool(ContextPoolManager.java:165)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.findOrCreateSessionCookie(DataControlFactoryImpl.java:136)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:222)
         at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:76)
         at oracle.adf.model.BindingContext.get(BindingContext.java:457)
    What is the problem?
    Where can I find the process to deploy in a multi-tier platform?
    Please, help me.

    Thank for your help.
    I reviewed the datasource configuration and it is Ok.
    The connection’s name isn't a datasource name. It is the connection’s name to the APPLICATION SERVER. I reviewed the bc4j.xcfg file and it has the following definition:
    <ConnectionDefinition name="AppServerPenny">
    <ENTRY name="remote-oracle-home" value="/home/oracle/OAS/10.2.0/middle"/>
    <ENTRY name="ConnectionType" value="Oracle_AS_10g_UNIX"/>
    <ENTRY name="HOSTNAME" value="penny.asesoftware.com"/>
    <ENTRY name="DeployPassword" value="true"/>
    <ENTRY name="oc4j-instance-name" value="OC4J_ARES"/>
    <ENTRY name="user" value="ias_admin"/>
    <ENTRY name="ConnectionName" value="AppServerPenny"/>
    <ENTRY name="ormi-username" value="admin"/>
    <ENTRY name="ormi-client-url" value="ormi://penny.asesoftware.com:23791"/>
    <ENTRY name="IIOP_PORT" value="1810"/>
    <ENTRY name="password">
    <![CDATA[{904}05B4D7F42A8C91433599EDC9FDE9B9B249A698997ABBAAAD13]]>
    </ENTRY>
    <ENTRY name="ormi-password" value="manager123"/>
    <ENTRY name="DeployPassword" value="true"/>
    </ConnectionDefinition>
    Why does the test utility not found the AppServerPenny connection?

Maybe you are looking for

  • Many to Many Relationchip joining issues

    I have the following 3 tables and I need to join it to get the data in a specific format. Below is the sample data for sample tables. Table1: ID         exp    req_date      Time        crit_met 3308    Yes    3/31/2015    00:00.0    Yes Table2: ID  

  • Interface output file : tab limited vs flat file with fixed length

    hey guys, any idea on difference b/w to file type : flat file with fixed length or tab limited file thanks

  • Calculate the perimeter of object in binary image how!!!!!!!

    Hi   I try to use labview to find area and perimeter of object in binary using vision function for the area the labview find it in pixel] but for   perimeter I have problem I read from ni.com vision manual this words http://zone.ni.com/reference/en-X

  • Why won't my HP printer work on my MacBook Pro? Help!

    I have been trying to get my scanner to work on my HP Photosmart 4385 All-in-one printer but it hasn't worked for a while. I googled some possible answers and found that apple has updated software (HP installer) with the drivers for my version of I O

  • Weblogic7.0 installation error

    During installation of WebLogic7.0, I got following error. Is there anyone knows the solution?? ============================================== ##> ./weblogic700_solaris.bin -mode=console [home/kty/weblogic700_solaris.bin] End-of-central-directory sig