Overwrite Value help error message

Hi Experts,
I want to overwrite the error message given by value help of an input field.
Currently its showing the default error message when the selected value does not exist in value help as "String "56fds65fs" does not match the enumeration"
Can i overwrite this message with my custom message as
"Data not found for the given selection"?
Regards,
Ashish Shah

Hi Guys,
There is a solution to this problem.
using the following tutorial.
[A Simple Input Form with Message and Error Service Support|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/webdynpro/wd%20java/wdjava%20archive/a%20simple%20input%20form%20with%20message%20and%20error%20service%20support.pdf]
i generated the error message using
wdThis.wdGetAPI().getComponent().getMessageManager().
reportContextAttributeMessage(
this.wdContext.currentContextElement(),
                         attributeInfo,
                         IMessageWD_TutComp.MISSING_INPUT,
                         new Object[] { fieldLabel },
                         true);
and raised the error as
wdThis.wdGetAPI().getComponent().getMessageManager().raisePendingException();
Regards,
Ashish Shah

Similar Messages

Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

Please Help - Error message when trying to open itunes

Hi
Can someone help pls? I was in the middle of upgrading my version of itunes and my computer crashed. Now when I try to open itunes I get an error message as follows: 'iTunes has encountered a problem and needs to close. We are sorry for the inconvenience'.
I don't know what to do! I am worried I have lost all of my music!?

hiya!
'Quick time failed to initialize. Error # - 2095. Please make sure QuickTime is properly installed on this computer'.
okay, let's try a careful standalone QT reinstall:
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

Please help: error message says ipod cannot be read from or written to

Hi
I have been using my iPod Video for a couple of months now without any problems, until yesterday. I tried to sync it after I downloaded a couple of new songs when I got this error message: "Attempting to copy to the disk 'Jason's Ipo' failed. The disk could not be read from or written to."
The 'Jason' in 'Jason's Ipo' is me.
Any help would be very much appreciated!
2002 PC Windows XP

Thanks, that was helpful.
While I was waiting for your answer I restored my iPod to its original settings. The screen is now black and white and the font changed to something smaller. Is this normal? How do I put the playlists and songs back in? Please post a link if there is a page on this subject.
Thanks again.

PSE 10 "help" - error message re Adobe Air

I am unable to access the PSE help within PSE 10. Each time I get an error message indicating that the problem relates to Adobe Air and that I should re-install it (Adobe Air). I have tried re-installing both Adobe Air and PSE10 but the problem persists - any suggestions
Thanks Dave
PS OS Windows 7 prof (64bit)

A clean re-install should have solved it.
I'd do these steps:
Close PSE.
Use Task Manager's "Processes" tab to kill any running Adobe or PhotoshopElements processes.
Use the Control Panel to uninstall Adobe AIR.
Reboot.
Get the latest version of AIR from here:
http://get.adobe.com/air/
Install AIR.
Ken

Please help--Error message in PSE 7

When I open PSE 7 I'm getting an error message that says:
Microsoft Visual C ++ Runtime Library
Runtime Error Program....Adobe Photoshop, etc
This application has requested the Runtime to terminate in an unusual way. Please contact the application support team for information.
and a couple times the message just says Adobe Photoshop has stopped working and must close.
When I click "okay" the entire program shuts down.
This started about 10 days ago. I uninstalled the program and re-installed and it worked okay. Now today the message is back again. I've tried unplugging everything, restarting the computer and nothing is working. I am using Windows Vista.
Please help.
Thanks, Doris

I do not know enough about my computer etc. to
follow the troubleshooting
information that you referenced. But I was able to check my system
information and everything was okay in that area. I've been using
the PSE 7 program for almost a year with no problem until now. Is there some way that I can talk to
a "real live" person to get help. Thank you for taking time to try and help me. I'm just not computer savvy enough to follow the instructions as given.
Thanks,Doris

Utl_http does not give a very helpful error message: Invalid Parameter

I'm writing PL/SQL to consume a web service on another server. In trying to execute this snippet of code, I receive this error:
ORA-28783: Invalid parameter
ORA-06512: at "SYS.UTL_HTTP", line 1023
ORA-06512: at line 29
Line 29 is the utl_http.begin_request statement shown below.
I'm baffled as to what the error message might point to and I'm looking from any insight others may have. The message is so generic as to be useless and I can't find any examples of others receiving this particular error when executing begin_request.
Please note that this is an SSL/HTTPS connection. If I remove the "S" and just use HTTP, I receive an appropriate message from the web server. (A tiny web page telling me I should be using the https version and not the http version.) I can also go to, for example, Google or CNN's web sites and pull back data but those are not SSL connections. It is the SSL part that isn't working.
This isn't a SOAP error since I never get a chance to create my SOAP message and place it in the request.
I've tried changing the POST to GET and the HTTP version to 1.0 just to see if the error message changes and it does not.
My wallet file is in place on the database server, placed in an accessible folder by
the DBAs. This code can see the wallet, I believe, because if I change the wallet
path to something non-existent, I receive a different error. I imported the web site certificate for the site I'm connecting to and placed that in the wallet. I've been able to cause "certificate chain" errors with empty wallets, so I think the certificate is correct.
I used SOAP-UI (www.soapui.org) and was quickly able to connect to the web server and begin having a "SOAP conversation", so I know the web services I'm connecting to are working. It is something in the database itself that is preventing this from executing - the wallet, a setting in the database, something like that. But what?
=======================================================
utl_http.set_response_error_check(enable=>true);
utl_http.set_detailed_excp_support(enable => TRUE);
utl_http.set_follow_redirect(5);
utl_http.set_wallet('file:/...', '*******');
--**** SET THE URL FOR THIS REQUEST *******
http_req:= utl_http.begin_request(
'https://....' --location of web services I want to use
, 'POST'
, utl_http.HTTP_VERSION_1_1
=======================================================

You seemrd to have ruled out most potential problems I could think of.
The error message just states that there is something wrong with the parameters that you use. Only point I can currently think of is a problem with the returned value.
How did you declare you http_req variable? Does it use the utl_http.req type?

Need help: error message in Log.

Hi,
I got the following error in log file when I open form in LC ES2 workspace. Does anyone solve it before?
WARN [com.adobe.document.XMLFormService] ALC-XTG-029-217: [2800] Bad value: 'designer__defaultHyphenation.para.hyphenation' of the 'use' attribute of 'hyphenation' element ''. Default will be used instead.
Thanks.

I zeroed in on this same error message today. I can't tell you exactly what was causing it, but I can tell you exactly the object that was causing the issue. It was a 1-row, 2 column table. In one cell was some text that included hyphenation ("in-process"). In another cell was a drop-down menu with only two options defined: pass and fail.
I noticed that as I was scrolling through the document, as long as this particular table was visible, I would get the same "bad hyphenation" message continuously, line after line, and once the screen threw up 8 lines of this same message at once. But once I deleted the object, the error no longer appeared, and when I re-created the same table sans hyphen, no error messages.
I must note that once the error message appeared, when I tried to work with the table-cells, the object no longer functioned as a joined table but instead worked like individual fields.
My suggestion is to go through your document and look for table cells with hyphenated text, delete them completely and then re-type them without the hyphen included, and see if that takes care of the problem. That's how I got rid of my error.

HT201210 Please help - error message saying 'filmware file is not compatable', and videos will not transfer from phone to computor. what can i do?

As title says, I keep having this error message 'filmware not compatable' and my videos will not load.
Can someone please help this very non-tech-savy lady???!!
Cheers in advance

Bad news: It sounds as if you were sold a jailbroken iPhone.
Good news: File a SNAD with eBay. Make sure all your correspondence has been through eBay Messaging. The fact that the seller has been ignoring you will not sit well with them.
You will get 100% of your money back, including shipping. Paypal will simply seize his funds and return what is yours.
Lesson: Don't buy a used iPhone.
It's much worse for the seller. His PayPal and eBay accounts will be frozen. Until he squares up with both you and eBay, he's out of money and out of business.

PLEASE HELP - Error message, re "unsupported" ringtone format

Although I was able to open, download and use ringtones recently, now when I attempt to open any ringtones I receive this error message in the Media folder: "The media being played is of an unsupported format." and will not play. I haven't received any calls to test whether my phone will ring or not, but I'm assuming since it won't play back in Media, I'm unable to pull up the ringtone..period.
I'm a newbie to Blackberrys...any help would be so appreciated. Thank you.
vdp
Solved!
Go to Solution.

I honestly don't know - the problem seemed to have fixed itself when I plugged it into the Desktop Manager and I sync'd everything. Very strange, but I couldn't tell you exactly how the problem was solved.

Value Help Error - Portal Runtime Error

Hey,
I am getting the error when i click on any Value help what is the problem
The Error that shown on the popup up or screen is
Portal Runtime Error
An exception occurred while processing your request
Exception id: 11:45_03/04/11_0002_3832651
See the details for the exception ID in the log file.
regds
Santosh

Probably you need to supply more details to see your problem. You can ask your sys.admin to see the portal log and eventually the ST22 dump.

HELP - Error message that I don't understand

When trying to burn an iMovie project to DVD through IDVD I get this error message about 5 minutes in to the process every time:
Error during rendering/encoding
There was an error during rendering/encoding of the menu/slideshows. The burning process has been cancelled.
I am a novice user & trying to make a DVD for all of my family back in the UK to send for Xmas - so URGENT now!!!
Can anyone advise what I'm doing wrong?
I have checked the disk tree and there aren't any errors showing up there as red crosses or black/yellow warning tape signs.
The DVD set up is very basic - no menus or extras - just an iMovie project that I exported from iMovie OK. I have been able to do a version for iTunes so I just don't get why this won't work and the error message is super unhelpful.

Hi JaneyHammond
Welcome to apple discussions. There's an old saying, "The faster I go, the behinder I get". This may apply here because I can tell you from experience that One Step and Magic Dvd are not any faster at capturing / encoding video to dvd-r than creating a dvd via the traditional approach. I don't recommend One step or Magic as a beginner.
Suggestion only: If you're a novice, then please create a typical iDvd project via Create an iDvd Project / apple's web site / iDvd tutorials (as opposed to a OneStep or Magic Dvd). Learn the basics first in order to make a standard dvd and then mess with the other approaches. Not the other way around.
http://support.apple.com/kb/TA27570
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6770.html
http://support.apple.com/kb/HT1583?viewlocale=en_US
http://support.apple.com/kb/TS2178
http://www.apple.com/ilife/tutorials/#idvd-burn
http://www.apple.com/ilife/tutorials/idvd/tutoriallist.html
Hope this helps but if not just come on back.
Message was edited by: SDMacuser

Help - Error message during output

Dear Members of the Forum,
Could you please help me solve the following problem?
I output a project in Adobe Media Encoder CS3 in MPEG2-DVD format and ended up with two files: 'movie.m2v' video file and 'movie.wav' audio file. Then I input those two files as 'timeline' in Encore CS5, did the menus, etc. After checking the project for errors none were identified and I went on building the DVD disc. During the building process the following error messages occured:
'PGC "The Movie" has an error at 00;01;24;20.
Internal software error: %0, line The Movie Info: name=The Movie,
ref=Bpgc, time=00;01;24;20'
When I play the movie in Encore no error occurs at the specified above point of time (00;01;24;20) - there is a crossdissolve transition at this point.
Any ideas how to fix this problem or probably help how to interpret the error message?
Thank you!

Thank you Stan and Bill. I'll try to impliment your tips to save my project.
Before I do so I need to clarify some details:
1) what does it mean to 'have gaps in the Video' that both of you mentioned one should avoid? In my case I have two coherent video.m2v + audio.wav files that were output from Adobe Media Encoder. Both play just fine until I try to output them from Encore. Do you mean gaps between the movie files in the Premiere timeline?
2) Did I do the right thing importing both the .m2v and .wav files as 'import as Timeline' in Encore CS5? Or I should have imported them as 'Asset'? What I did basically when I started the project is I hit 'import as timeline' and then shift-selected both .m2v and .wav files -> the result was that they both appeared neatly lined-up in the Encore timeline and the playback was smooth.
3) If I fail to fix the above error, is there a way to build a 'play-all' DVD without menus in Premiere using the m2v and wav files I have? This is going to be my contingency plan.
Many thanks!
Regards,
Igor

Very helpful error message: "An unknown error occurred (-12939)

My iPhone will now play nothing that hasn't already been downloaded to it via Match. 'Use Cellular Data' is set to ON.
Sometimes after tapping the Play icon an error message will pop up after a while: 'Unable to Download Songs - An unexpeced error occurred (-12939)' with buttons 'Done' and 'Retry'. 'Retry' results in the same condition.
But most of the time when I tap the Play icon, the progress bar sits at 0:00 with no indication that it's even trying to download the track.
This occurs whether I'm accessing via WiFi or via a 5-bar 4G signal.
It hasn't always been like this - do you know what -12939 means?
Since Apple refuses to support this product, some 'regular' person must have access to the error codes, no?

Hi Coolmonk,
Welcome to the Support Communities!
Do you have a Windows computer? The article below explains how to troubleshoot error -9812.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297?viewlocale=fr_fr
"Error -9812"
This alert is often caused by cryptographic issues with your Windows installation.
If you have broadband access (cable, DSL, or other high-speed access), try turning your modem off for a minute and then turning it back on. If you also have a router connected to the modem, turn it off for a minute and then back on again. Once you've established a web connection, try accessing the iTunes Store again from iTunes.
Check for updates to Windows, or search Microsoft's support pages for KB931125. Install the latest available update for root certificates from the Microsoft Download Center.
If the issue continues, follow the steps in the Microsoft knowledge base article KB822798 to resolve the issue. Note that while the Microsoft article describes a different issue, both issues share the same cause and solution.
I hope this information helps ....
Have a great day!
- Judy

Help-Error message itunes producer

Can somebody help me please.
I'm trying to upload something and they're giving me the same error message.
I don't know what to do next... I'm exporting from indesign in epub.
Thanks for your help.

Use this forum: Delivery
...and try iTunes Producer Help and epub validation tools to confirm you're using the proper .epub format, etc.

Overwrite Value help error message

Similar Messages

Maybe you are looking for