Unable to syndicate same Remote System with differnt value

Hi,
I am working on MDM 7.1 SP05 and I have the following issue with syndication:
I have a remote system table (Key Enabled) with System as Non-Qualifier and value as Qualifier and I have values in the MDM Datamanager as
MDM ID, Remotesystem (Multivalue Qualifier Table with Key Enabled)
111,((Qual1-Key,Val1),(Qual1-Key,Val2),(Qual1-Key,Val3))
When I syndicate I see only one value as 111, (Qual1,Val3)... But I want to have all the Qualifiers-Key with multiple values.. Where as in MDM 5.5 I can see all the Qualifiers with out any issues..Is this a restriction in MDM 7.1?
If I map System instead of Remote Key of Qualifier Table then I can see multiple times of same remote system with appropriate values.. But If I map remote key then I see the consolidated/the latest system-remote key wiht value... But I want system-remote key value appear multiple times...
Thanks alot
Rajeev

I am using customised...
Did you tried syndicating Remote key of that table or the field of the Qualifer table?
I am able to syndicate out with the system field and values.. But I want to syndicate out the multiple values wiht remote key of the table..
As mentioned Remote keys are AAA and BBB for System Sys1 and Sys2..
First I imported remote system table with Sys1 and Sys2 with remote Keys as AAA and BBB. then along wiht main table record I imported Sys1 and Sy2...
While Syndicating I want to syndicate AAA and BBB values along with Value field...
Suppose:
I have data :
MDM ID, RemoteSystem(System, Value)
111, ((Sys1,Val1),(Sys1,Val2),(Sys1,Val3),(Sys2,Val1))
Remote Keys for Sys1AAA and Sys2BBB
In the Syndication Manager I mapped as below: RemoteSystems RemoteKey and value are mapped to target...
RemoteSystem
--RemoteKey
System(DFNQ)
--Value(Qualifier)
I mapped RemoteKey and Value to the target fields.. Which is a XML output..
<REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val3</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>BBB</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val1</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
</REMOTE_SYSTEM>
Where I need the following Output:
<REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val1</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val2</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val3</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>BBB</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val1</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
</REMOTE_SYSTEM>
Any inputs.
Thanks
Rajeev

Similar Messages

HTTP Response :500 unable to connect to remote system.

Hi,
I am doing proxy-xi-file scenario, where i am getting this error in sxmb_moni in R/3.
The error reads with red flag:
HTTP Response :500 unable to connect to remote system.
Please tell me what can be the reason.

Snehal,
Error: The error message 503 Service unavailable Application stopped! is displayed.
Description: The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Refer SAP Note 803145,807000,791655
You can have a look on this blog for the same.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Sarvesh

RFC\BAPI to login into remote system with user id's in that system

Dear Friends,
I have a requirement to run a job .In that job, i need to login into other remote system with the user id's in that system.
May I know, is there any remote function module or BAPI available.
Let me know how to solve this issue.
Regards,
Madhu..!!

Hi Divakar,
As far as I know, there isn’t this feature of remote test in VS2013.
I suggest that you could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there so the others can vote it. If you submit this suggestion, you might post that link here which will
benefit others who has the similar issue
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

WVC80N software "unable to set up remote viewing" with TZO

I've researched this all night and I'm now begging for help.
I've got the camera all set up and I can view it while on the local network. The problem comes in when I try to sign up for the 90-day free TZO trial that comes with the camera to try to get remote viewing on my iPhone. I progress through the Linksys setup software (as is detailed here: http://www.tzo.com/MainPageSupport/HowToPage/LinksysHomeMonitoringNCameraTutorial.html) and between steps 7 and 8, I get a screen that says "Unable to set up remote viewing" with my network, click this link to learn how to remotely view your camera. The link takes me to a page on the TZO site that says "Oops, there was an unknown error with setting up you camern for remote access" and nothing else. It seems to die on the "Configuring Internet Server" step.
Within the camera's setup page, there's a link to the TZO website that tells me that because I have a WVC80N, I have to use the setup CD to set up the 90-day free trial, which fails as described above.
I've set the camera to have a fixed IP of 192.168.1.200
I've set the Alternative Web Access Port to 1024
In Port Range Forwarding in the router, I've set 1024 to 1024 to forward to 192.168.1.200 (not sure exactly what this does)
The router is a WRT160N
Any ideas?

Have you tried getting in touch with TZO and set the DDNS up the old fashioned way? I also know that TZO has a beta going on of a new IP camera application for remote viewing and this may also help. Not sure why the setup is failing though, but oook is probably right, something wacky with the router, IP or ISP that the setup software just doesn't like.
http://www.MyHomeServer.com
Linksys IP camera reviews, Tutorials and How-To's on Web & Mobile Streaming

Mapping Multiple Source fields to Single Target Fields with differnt Values

Hello Friends,
I am having a senario where I have to mapped multiple fileds from source str. to same Idoc Fields with ( differnt default values )
E.g Source Str.
- ShopNO
- OrderTyp
Has to mapped to Idoc Str E1EDK14-Orgid.
E.g Mapping:
So when ShopNo will mapped to E1EDK14-Orgid the default value should be "MOP" & E1EDK14-Qualf should be 019
and when OrderType will be mapped to E1EDK14-Orgid the default value should be "STD" & E1EDK14-Qualf should be 012
So I tried of using node "UseOneAsMany".....but there I cant define the vaule of field orgid, and seconly how to specify the values of field Qualf?
Do i need to write my own specify function ? or I can sovle this issue using standard avaiable functions ?
Regards,

Hi Ravi,
Thanks for your reply....
I am facing following problem... when I try to duplicate the segment and do mapping....... and then when I save, I got following error msg:
The source or target structure has been changed or could not be found in the Integration Repository. The mapping definition contains elements or attributes that do not exist in the changed structure. The relevant entries will be deleted
Target structure has no such path: /ZARVO_ORD/IDOC/E1EDK05[1]/KSCHL. Skipping mapping
Target structure has no such path: /ZARVO_ORD/IDOC/E1EDK05[1]/KRATE. Skipping mapping
Any suggestion ?
in other words, when I do duplicate it creates me the segment, but when I save it, it gets disappered .........
Regards,
Edited by: Shah H on Oct 26, 2009 3:17 PM

Unable to pair Apple Remote App with iTunes

I am running a Toshiba Satellite L505D-S5965 with Windows Vista SP 2. My iTunes software is 8.2.1.6, and my iPhone 3GS is running OS 3.0.1 (7A400). Both the Satellite and iPhone are connected to the same WiFi local network, and yet the App "Remote" by Apple Software is unable to communicate with iTunes to allow the entry of the four digit code to establish control of the iTunes library. Shortly after purchasing the iPhone 3GS I purchased the Satellite, but in the couple of weeks between the purchases the Remote App worked fine on my Gateway running Windows XP SP2. I have been through Apple Telephone support twice, and have really run one of the technicians through the mill researching possible solutions. I have visited an Apple Store Genius, who could find no reason for the problem. The iPhone and Remote App worked perfectly well on the store's WiFi and Mac, but his iPhone also wouldn't work with my laptop. I have been through Kaspersky's technical support system to ensure that there isn't a firewall issue. They have assured me, after reviewing logs from my laptop, that this is not the case. I even went so far as to uninstall all my Kaspersky product, but the Apple Remote App still would not function properly. I have updated the router's firmware, and checked that the laptop's wireless card is running the latest driver. At this point I can't think of anything else to try but would really appreciate any suggestions. Thanks, Steve

Monday 7th Jan.
Just to say that Apple did call me this am to discuss the problem on foot of a call I made last week.
In the meantime the remote worked with both a 2007 IMac and a 2009 laptop but not on the m-mini.
When I tried pairing this morning during the call by pressing Menu and next together it paired.
The change is very subtle, it just says paired in the advanced section of the security et sl section as referred before, with a fleeting 2 intersecting rings icon.
The big difference is that Front Row is gone....
The remote only works to a limited degree within some apps such as iTunes and iPhotos.
In theory it controls the volume in iTunes but as of now for me it doesnt....:( need to look more.
As to what the problem was:
It seems there is a set of keyboard combinations that can be used to force a reset the ID of the remote, the suggestion is MAYBE that by getting it to work on the iMac and laptop in some way reset the ID.
This stuff is WAY beyond my skill level:)
I did impress upon Apple the need to look at the issue in threads like this....
Message was edited by: qazxsw52

Unable to Edit/Remove Remote Systems using MDM 7.1

Unable to find an answer to this in either the forums or the Wiki...
Using MDM 7.1 through the SAP MDM Console 7.1.03.54
I can add a new Remote System, it comes up with the default values for the Remote System fields:
Name: New Remote System, Code: NewRemoteSystem, Type: Inbound, Key Generation: None
But I cannot modify the field values nor can I delete the Remote System.
The right-click context menu always has 'Delete Remote System' greyed out.
Nor do I see any mechanism to modify the fields' values. Moving to the Remote System Detail pane, none of the fields are edittable; I have tried left-clicking, right-clicking, double clicking, using the Edit tool bar menu - nothing lets me edit these fields.
My user account has the Admin role. Looking to the Admin role, it has Execute for all functions, and Read-Write to the Remote Systems in the Tables and Fields tab.
Any help would be appreciated.

Hi Andrew,
Your repository should be in unloaded state to make changes in any table whether main table, subtable, Ports, Special tables or Remote Systems table etc. As you want to make changes in your repository Remote Systems, please unload your repository->Go to Admin>Remote systems>Make necessary changes (Add/Delete/update)--> Then load repository.
Note: You can only add User and Roles during Repository loaded state.
Regards,
Mandeep Saini

PL/SQL block query error when going to a remote system with 1 parameter.

Hi,
I am getting the error:
Invalid function body condition: ORA-01460: unimplemented or unreasonable conversion requested ORA-02063: preceding line from HANSEN_REMOTE
The issue appears to result from opening a cursor that is a select statement is in some way accessing records via a dblink and the 'where' clause is has more then one session parameter in it. Here is the smallest pl/sql block that results with an error:
DECLARE
CURSOR c_GetPay IS
SELECT PERSON_ID
FROM CASH_PERSON@HANSEN_REMOTE
WHERE LAST_NAME = :P320_HANSEN_LAST_NAME
AND FIRST_NAME = :P320_HANSEN_FIRST_NAME;
BEGIN
OPEN c_GetPay ;
CLOSE c_GetPay ;
RETURN TRUE;
END ;
If I remove 'AND FIRST_NAME = :P320_HANSEN_FIRST_NAME' from the curser, there is no problem. This block of pl/sql is in a On Load: Before Header
on a page branch. This issue remains consistent in our 1.6.1.00.02 instance of HTMLDB with an Oracle database version 10.1.0.3.0. This instance is
a fresh install of the 10g and HTMLDB.
Does any one have any ideas of why I am getting this error message. I really need to get it resolve soon as we are trying to get an application up by the end of August and there is still alot of coding needing to be done.
Thanks for the help.
Lanie

Scott, I have tried everything that this point except copy the whole table from the remote system.
Here is a short version of what I have tried...
-- hard coded condition...timing was not an issue here...it was quick.
declare
v_in_PersonId number(9);
cursor c_GetPay
IS select PERSON_ID --, first_name, LAST_NAME
     from HANSEN_CONTACT
          where first_name like 'LANIE'
          AND last_name LIKE 'MOORE'
BEGIN
OPEN c_GetPay;
FETCH c_GetPay INTO v_in_PersonId;
CLOSE c_GetPay;
RETURN TRUE;
END
-- this is an internal variable set to the string literal...does not as the v function was not called.
declare
V_TEST VARCHAR2(150);
V_TEST2 VARCHAR2(150);
v_in_PersonId number(9);
cursor c_GetPay
IS select PERSON_ID --, first_name, LAST_NAME
     from HANSEN_CONTACT
          where first_name like :V_TEST
          AND last_name LIKE :V_TEST2
BEGIN
V_TEST := 'LANIE';
V_TEST2 := 'MOORE';
OPEN c_GetPay;
FETCH c_GetPay INTO v_in_PersonId;
CLOSE c_GetPay;
RETURN TRUE;
END
-- this has the v function called in the cursor since no matter what I do, I have to call it so I don't get my original error. This takes over a minute to return, and it is using hard coded values...if I use session variables where I place the information from the user, it takes even longer.
declare
V_TEST VARCHAR2(150);
V_TEST2 VARCHAR2(150);
v_in_PersonId number(9);
cursor c_GetPay
IS select PERSON_ID --, first_name, LAST_NAME
     from HANSEN_CONTACT
          where first_name like V(:V_TEST)
          AND last_name LIKE V(:V_TEST2)
BEGIN
V_TEST := 'LANIE';
V_TEST2 := 'MOORE';
OPEN c_GetPay;
FETCH c_GetPay INTO v_in_PersonId;
CLOSE c_GetPay;
RETURN TRUE;
END
It does not appear to be an issue if I am looking at a view going to the remote system or the table it's self. The slowness issue takes place. (In short I have tried replacing HANSEN_CONTACT which is a view with the direct table link of imsv7.contact@HANSEN_REMOTE and that did not solve the timing issue).
Any ideas?

ECATT Unable to Test a Remote System

Hello Dear Expert,
I am trying to record an ecatt Script to be played from my solman system on a BW system.
I've created the system data container with the rfc_bw in SM59.
WHen i test the connection using Test Connection, everything is ok.
When i test the connection using Remote Login , nothing happen at all.
When i play the script , i 've got error
1-User has not logged in 00:00:20
2- User has no dialog right
3 - too many sessions are open
This is the same behaviour if i check Logon screen in SM59 or if i enter
a valid user on system BW (dialog user with RFC all rights + ecatt rights)
When i use "Log on Target System" nothing happend in eCATT also.
But i can display target system infos from ecatt Menu.
Do you have any clue about what could be wrong ?

Hi
I'm getting exactly the same error message when playing back the script I've recorded. Albeit in our SAP system (not BW system)
I'm in our Development System at the moment and want to reply back into the same System that I have created the eCATT in and created the recording to run the eCATT in.
Did you manage to resolve this?
If so could you share
Thanks
Steve

Open a PDF file on a remote system with an URL

With Javascript,
I want to open a PDF file in Acrobat using an URL, I dont want open this file in a Webbrowser.
The openDoc method expects a file path, not an URL, and the getUrl method open the file in a Webbrowser.
How to do ?
David G

You will need to write a custom plugin that installs a custom file system for http (or ftp or whatever protocol(s) you plan to use).

IT0041 : Same date type with different values in the same infotype

Hi,
Is it possible to store in the 0041 infotype, the same type date but with a diffentent date.
Example :
IT0041
employee 1000:
date type : xx 01.05.10
date type : xx 02.05.10.....
Thanks

Hi there,
My two cents.
I don't think it can be done in standard. Also copying IT 0041 would limit you to enter only 12 dates.
My suggestion:
Create a custom infotype with subtype field and a date field like IT 0015.
On the screen you will only be seeing subtype and date. And assign time constraint 3 to it.
In this way with the same subtype you can record several dates.
cheers
Ajay

Submit a report program with same selection screen with some values exclude

Dear All,
I have to submit a stndard report program from a copied zprogram with same slection screen values ,
and in some slect-options some values will be excluded depending upon the zprogram.
How to make it.
I mean when i submit , same selction screen values should go along with , depending upon some condions i have to exclude some values .
for ex: selection screen from a to b
posting date should go same
but may be along with it i have to pass movem,ent type <> 202 to the submit screen ,.
how to do this?

Hi Rajendra
>What if i have to pass the movement type also 200 to 250 , with 202 and 203 exluded .
Use BT ( between ) operator for 200 to 250 :
lr_move_type-sign = 'I'.
lr_move_type-option = 'BT'.
lr_move_type-low = '200'.
lr_move_type-high = '250'.
COLLECT lr_move_type.
And use NE ( not equal ) operator to exclude 202 and 203 :
lr_move_type-sign = 'I'.
lr_move_type-option = 'NE'.
lr_move_type-low = '202'.
COLLECT lr_move_type.
lr_move_type-low = '203'.
COLLECT lr_move_type.
It works just this way.
> Secondly,
>
> If i have the selction sreen same in both the screen , is it possible to pass the same values as it is with out writing one by one selct-option and parameter?
No I don't think there is way to do it without writing one by one
but you may not specify for empty select-options.
Edited by: Bulent Balci on Aug 21, 2010 11:46 AM

Do 2 same auth objects with different values bleed together?

If I had a user who had Auth object F_BKPF_BUK with Activity 01 and Company Code 1200 and also Auth Object F_BKPF_BUK with Activity 03 and Company Code 1300, would the user have 01 and 03 for both Company Code 1200 and 1300 or would the user be restricted to 01 for 1200 and 03 for 1300?

It depends on the object and how the result of the authority-check is "built".
For the result of a single authority-check Sanju is correct.
It would not make sense to attempt to display something (retrieving the value from the record) which has not been created yet (checking the value in the entry screen).
However the opposite can be true for authority-checks within arguments:
- IF weak_check_failed    "user is not authorized...
- THEN perform strong_check    "permit everything if passes...
- ELSE return_to_...     "Go back to list...
However, in many cases this weaker : stronger check is against different objects.
Other transactions will completely bypass the one object and only use a stronger one.
F_BKPF_BUK should be okay for transactions FB01 and FB03, for example.
Cheers,
Julius

Remote System and Remote Key Mapping at a glance

Hi,
I want to discuss the concept of Remote System and Remote Key Mapping.
Remote System is a logical system which is defined in MDM Console for a MDM Repository.
We can define key mapping enabled at each table level.
The key mapping is used to distinguish records at Data Manager after running the Data Import.
Now 1 record can have 1 remote system with two different keys but two different records cannot have same remote system with same remote key. So, Remote key is an unique identifier for record for any remote system for each individual records.
Now whenever we import data from a Remote System, the remote system and remote key are mapped for each individual records. Usually all records have different remote keys.
Now, when syndicating back the record with default remote key is updated in the remote system that is sent by xml file format.
If same record is updated two times from a same remote system, the remote key will be different and the record which is latest contains highest remote key.
Now, I have to look at Data Syndication and Remote key.
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back. But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
Regards
Kaushik Banerjee

You are right Kaushik,
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back.
Yes, but if they are duplicate, they needs to be merged.
But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
This is after merging. So whichever remote key has tick mark in key mapping option(default) , it will be syndicated back.
Pls refer to these links for better understanding.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c%0c
Hope this helps,
+ An

RFC login and user creation to remote system

Hi there,
Hopefully this is the related forum for this question. We have a scenario where we need an automated process to create users on one system and then create just the same account on a remote system with deactivated password.
How is this best handled in ABAP code where the system account info/password of the remote system is not listed in the abap code. Should a SM59 connection be created and then somehow this is referenced from abap code ?
Also, this will be a SM37 job stream running on the local server under one name running the job and in the code it should be using a different name (destination) for the remote connection to create the user.
I am a security person, not abaper. Input /best practice appreciated.
Thanks !

> I am a security person, not abaper. Input /best practice appreciated.
Actually this is a security question, so I have moved it to the security forum...
If the password is to be deactivated in the target system but not in the source ("master" system) then you can use several standard user provisioning mechanisms for this (CUA, GRC-CUP, IdM, UME configuration...) and configure the target system to deactivate the password itself. There are also several ways of achieving this, without any coding required necessarily.
The most obvious one which jumps to mind is RZ11 parameter login/password_change_for_SSO.
Alternately if your scenario is better suited to it, you can also use login/password_max_idle_initial.
Also see transaction RSUSR200.
Etc...
> Should a SM59 connection be created and then somehow this is referenced from abap code ?
No. It should be referenced from configuration of the application which calls the RFC connection, defined in SM59. You can also optionally use the "current user" setting and alternate authentication methods to (saved) passwords. This I would generally recommend.
Cheers,
Julius
Edited by: Julius Bussche on Feb 23, 2010 10:36 PM

Unable to syndicate same Remote System with differnt value

Similar Messages

Maybe you are looking for